Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Environmental Ground Support (EGS) Spare Parts

Active

Federal

Response Deadline09/18/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the NASA Shared Services Center involves the procurement of specialized spare parts and precision components for Environmental Ground Support systems. The scope includes sourcing components for analytical instruments and environmental control systems that strictly adhere to NASA technical specifications. All deliverables must be physically transported to the designated NASA facility. The contract requires full compliance with FAR 52.204-9 and FAR 52.223-23 regulations. Operating under NAICS code 334516, the project supports prime contractors in maintaining critical ground support infrastructure. The solicitation was posted on September 14, 2026, with a response deadline of September 18, 2026.

General Info

Subcontract for NASA specialized spare parts and precision components for ground support systems.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC26940651Q .

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Spare parts for EGS systems used by KPLSS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 18

Submission deadline

Response Deadline

09/18/2026, 08:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized spare parts and components for Environmental Ground Support (EGS) systems for prime contractors on NASA Shared Services Center projects. Sources precision components for environmental control systems and analytical instruments meeting NASA technical specifications. Ensures compliance with FAR 52.204-9 and FAR 52.223-23. Delivers physical spare parts and components to the designated NASA facility.

Similar Contracts

Same NAICS industry code

Bridge Contract Hematology System

Solicitation # HT940626QE074

Defense Health Agency

POSTED

about 5 hours ago

DEADLINE

6640--Microtome

Solicitation # 36C26326Q0562_3

Network Contract Office 23 (36C263)

POSTED

about 5 hours ago

DEADLINE

X-RAY APPARATUS, RADIOG

Solicitation # SPE4A5-26-T-424T

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-26-T-6783

This solicitation, issued by the DLA Troop Support Medical Supply Chain, is for the procurement of Draeger carbon dioxide measuring tubes (NSN 6630-12-189-3126) used to measure carbon dioxide content in compressed gases. The required items are round glass tubes with melted tips, featuring a measuring range of 100 to 3000 parts per million for one liter of air. The order consists of one package containing ten tubes. The items are subject to a non-extendable shelf life of 24 months, with a requirement that no more than three months elapse between the date of manufacture and the date of delivery to the government. Delivery is set for 20 days after receipt of order, with shipping, inspection, and acceptance all occurring at the destination. Packaging must adhere to ASTM D3951 and DLA packaging requirements, utilizing suitable sealed unit containers and commercial exterior shipping containers. Marking and labeling must comply with MIL-STD-129 and Medical Marking Standard No. 1, specifically including the date of manufacture, expiration, and contract or lot number. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and requirements for safeguarding covered defense information. Quotations must be submitted via the DIBBS system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 24 hours ago

DEADLINE

Guildline Autosal Salinometer 8400B SupplyThis subcontract opportunity with the Department of Commerce NOAA involves the supply of a fully functional Guildline Autosal Salinometer 8400B system for prime contractors. The required equipment package includes the 8400B Salinometer, an ACI Autosal Computer Interface, an 84105 External Sample Pump, and a digital manual. A critical requirement for the delivery is the inclusion of a Calibration Certificate to ensure system accuracy. The project is categorized under NAICS code 334516 and will be performed in Key Biscayne, Florida. Interested parties must note the tight timeline, with the notice posted on September 14, 2026, and a response deadline of September 18, 2026.

Department Of Commerce Noaa

POSTED

DEADLINE

High-Density 2D MEA Platform Hardware SupplierThis subcontract involves the supply of a complete high-density 2D multi-electrode array electrophysiology platform for prime contractors supporting FDA CBER and CDER projects. The scope of work includes the manufacture and delivery of the core instrument, a specialized computing workstation, and necessary electrophysiology accessories, all of which must adhere to the Technical Compliance Matrix. The hardware will be delivered as a fully operational platform to the FDA White Oak Campus. The supplier is required to ensure full compliance with the Trade Agreements Act. This procurement is managed under the FDA Office of Acquisition and Grant Services within the Department of Health and Human Services.

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

Dynamic Shear Rheometer (DSR) SupplierThis subcontract agreement outlines the procurement of a Dynamic Shear Rheometer (DSR) for prime contractors working on Ohio Department of Transportation laboratory projects. The supplier is responsible for delivering one DSR unit that meets all specified quality, performance, and technical characteristics, ensuring the equipment adheres to brand name or equal specifications. Delivery is to be handled via F.O.B. Destination to a designated ODOT location. The opportunity was posted on September 14, 2026, with a response deadline of October 6, 2026. Classified under NAICS code 334516, the contract is managed by the Department of Transportation. Interested parties can find further details and manage their submissions through the OhioBuys portal.

Dept Of Transportation

POSTED

DEADLINE

Nikon AX-FN BPU Stimulation Back Port SupplyThis subcontract involves the procurement and delivery of one Nikon AX-FN BPU Stimulation Back Port and associated accessories for the National Institutes of Health Olao under the Department of Health and Human Services. The hardware is intended for Fluorescence Recovery After Photobleaching applications and must be delivered to Bethesda, Maryland. All equipment must be new, defect-free, and fully compatible with existing imaging software, control hardware, and cameras. The opportunity is categorized under NAICS code 334516 and requires the contractor to maintain an active SAM registration. Interested prime contractors must submit their responses by September 18, 2026, to fulfill the requirements of this scientific equipment project.

National Institutes Of Health Olao

POSTED

DEADLINE

RF Spectrum Analyzer System SupplyThis subcontract involves the supply of one high-performance RF spectrum analyzer for prime contractors supporting projects at the US Embassy Colombo. The system must be capable of measuring total harmonic distortion, carrier-to-interference, spectral emission mask, occupied bandwidth, channel power, and field strength. Technical requirements include AM/FM audio demodulation and a real-time analysis bandwidth ranging from 22 MHz to 150 MHz. The equipment must adhere to safety and regulatory standards including US FCC, EU CE/RoHS, and UK specifications. This procurement is managed by the Department of State for performance in Colombo, Sri Lanka, with a response deadline of September 29, 2026.

US Embassy Colombo

POSTED

DEADLINE

Supply of Epoch 650 Digital Ultrasonic Flaw DetectorsThis subcontract, posted on September 14, 2026, involves the supply of four high-precision Epoch 650 digital ultrasonic flaw detection machines for prime contractors supporting DLA Maritime at Pearl Harbor. The required units, part number EP650-BX-AE-K, must be configured with BNC connectors, English keypads, and specific software capabilities including Dynamic DAC/TCG and AWS D1.1/D1.5 ratings. The contract mandates strict adherence to ISO 22232-1 compliance and requires the delivery of complete units accompanied by their respective calibration certificates. This opportunity is designated as a total Small Business Set Aside under NAICS code 334516, with a response deadline of September 16, 2026.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

BRAND NAME -Sci-Aps XRF Geo-Chem Analyzer

Solicitation # W912HZ26QA054

The U.S. Army Corps of Engineers Engineer Research and Development Center is soliciting quotes under solicitation W912HZ26QA054 for the procurement of nine brand name Sci-Aps X-555 Geo-Chem handheld X-ray fluorescence analyzers. These instruments are required for rapid on-site geochemical analysis and environmental assessments in remote areas, specifically targeting light and heavy rare earth elements and other transition metals. Each system must include two Li-ion batteries, a charger, a ruggedized carrying case, spare Prolene windows, an operations manual, and a minimum one-year manufacturer warranty. This requirement is a total small business set-aside under NAICS code 334516. Award will be made to the responsible offeror based on the Lowest Price Technically Acceptable (LPTA) criteria. Technical acceptability requires the provision of the specific brand name equipment and a proposed delivery lead time of no more than 45 calendar days after receipt of order. Delivery is FOB Destination to Vicksburg, Mississippi, with a requested delivery date of November 9, 2026. All items must comply with DoD Item Unique Identification (IUID) marking and MIL-STD-129 labeling standards. Quotes are due by 12:00 PM CDT on September 22, 2026, and must be submitted to the designated contracting point of contact.

W2R2 USA Engr R & D Ctr

POSTED

DEADLINE

Quantel CFR 400 GRM pulsed laser system

Solicitation # N0018926QB145

NAVSUP FLT LOG CTR NORFOLK has issued a sole source Request for Quotation under FAR Part 12 for the procurement, assembly, and setup of two Quantel CFR 400 GRM pulsed laser systems for the Naval Medical Research Unit San Antonio. The systems must be delivered in new condition and be technically identical to the existing unit at the facility to ensure experimental repeatability. Key technical specifications include a wavelength of 532 nm, a repetition rate of 10 Hz, and the inclusion of an integrated beam block along with all necessary safety features and control systems. The contract is a Firm Fixed Price arrangement with a requested delivery date of October 31, 2026, and an equipment build lead time of 30 days. Delivery is specified as FOB Contractor Destination to JBSA Fort Sam Houston, Texas. The contractor is required to utilize the Wide Area WorkFlow system for electronic invoicing and must adhere to strict marking and identification standards, including ISO/IEC International Standard 16022 for two dimensional data matrix symbology and MIL-STD-130. Responses are due by September 17, 2026, and must be submitted to the primary point of contact, Roslyn Spruill.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

CCF (Converter Compressor Facility) Transmitter and Spare Parts – Flexim Brand Name

Solicitation # 80NSSC26942448Q

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

eVTOL Flight-Test Analysis and ReportingThis subcontract, titled eVTOL Flight-Test Analysis and Reporting, supports NASA Armstrong Flight Research Center projects by providing technical analysis of flight-test data for prime contractors. The scope of work involves analyzing telemetry and data logs from NASA RAVEN SWIFT and NASA RAVEN aircraft to evaluate flight results against simulation predictions in accordance with established flight-test objectives. The contractor is responsible for delivering detailed flight-test analysis reports and contributing to a final collaborative technical report. Managed by the NASA Shared Services Center, the performance of this contract is centered in Edwards, California, under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

eVTOL Simulation Environment Integration & TestingThis subcontract, titled eVTOL Simulation Environment Integration and Testing, is managed by the NASA Shared Services Center for the National Aeronautics and Space Administration. The primary objective is the integration of AEP software into representative simulation environments for prime contractors supporting NASA Armstrong Flight Research Center projects. Work will be performed in Edwards, California, under NAICS code 541330. The scope of work involves conducting full-scale simulation evaluations and performing cross-scale validation between sub-scale and full-scale models in accordance with NASA-approved simulation protocols. Key deliverables include the production of full-scale simulation evaluation reports, regression validation reports, and cross-scale validation reports.

Engineering Services

POSTED

DEADLINE

Adaptive Envelope Protection (AEP) Software EngineeringThis subcontract with the NASA Shared Services Center focuses on the design, coding, and implementation of a modular runtime Adaptive Envelope Protection software framework. The project supports prime contractors on NASA Armstrong Flight Research Center initiatives, specifically developing modular runtime software for both sub-scale and full-scale NASA RAVEN SWIFT eVTOL aircraft. The selected provider is responsible for creating documented source code and software architecture that adheres to NASA runtime safety assurance standards. Final deliverables include the completed AEP software framework and all associated architecture documentation. The work is performed in Edwards, California, under NAICS code 541511.

Custom Computer Programming Services

POSTED

DEADLINE

FUJINON 4K Studio/Field Lens SupplyThis subcontract through the NASA Shared Services Center involves the procurement and delivery of one FUJINON 4K Studio / Field Lens Model UA125x8BESM. The equipment is intended for prime contractors working on imaging payload projects at the NASA Langley Research Center to upgrade existing systems from 1080p to 4K resolution while ensuring magnification and mounting compatibility. The opportunity is designated as a total Small Business Set Aside under NAICS code 541922. Eligible providers must be authorized FUJIFILM Corporation suppliers and maintain active registration in SAM.gov. The selected contractor is responsible for delivering the physical lens unit FOB Destination.

Commercial Photography

POSTED

DEADLINE

Supply of Clausing Gap Bed LatheThis subcontract through the NASA Shared Services Center involves the procurement and delivery of one Clausing Model 8044VSJ Gap Bed Lathe. The equipment must meet all technical specifications outlined in the Statement of Work and be delivered to the Engine Research Building in Brookpark, Ohio. The selected provider must be an authorized brand-name distributor of Clausing machinery to ensure the delivery and installation of the lathe. This requirement supports prime contractors operating on projects for the NASA Glenn Research Center under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Clausing Vertical Milling MachinesThis subcontract through the NASA Shared Services Center involves the procurement and delivery of two Clausing Model 3VS08 Vertical Milling Machines, measuring 10 by 54 inches, for prime contractors at the NASA Glenn Research Center. The selected provider must be an authorized brand-name distributor of Clausing machinery and is responsible for ensuring the equipment meets all technical specifications outlined in the statement of work. The equipment is to be delivered and installed at the Engine Research Building located in Brookpark, Ohio. This procurement falls under NAICS code 423830 and is managed by the National Aeronautics and Space Administration.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Flight-Qualified Instrument Housing and Thermal ManagementThis subcontract with the NASA Shared Services Center involves the machining and assembly of flight-qualified mechanical enclosures for CubeSat projects at the Goddard Space Flight Center. The scope of work requires the use of CNC machining with aerospace-grade titanium or aluminum to produce housings equipped with thermal straps and heat sinks designed to regulate sensor temperatures. The contractor must ensure all deliverables strictly adhere to a volume limit of 1U and a mass limit of less than 0.5 kg. The final delivery consists of the completed mechanical housing and thermal assembly, with the opportunity posted on September 14, 2026, and a response deadline of September 17, 2026.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Imaging Subsystem EGSE Development and SupplyThis subcontract for Imaging Subsystem EGSE Development and Supply involves providing Electrical Ground Support Equipment for prime contractors working on NASA Goddard Space Flight Center CubeSat projects. The scope of work includes the design and construction of precision power supplies, data acquisition systems, and test benches specifically intended to verify imager performance prior to flight. The contractor is responsible for delivering both the EGSE hardware and the corresponding test software. Managed by the NASA Shared Services Center under NAICS code 334290, the opportunity was posted on September 14, 2026, with a response deadline of September 17, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Imaging Subsystem Flight Software and Driver DevelopmentThis subcontract, titled Imaging Subsystem Flight Software and Driver Development, involves the creation of flight software and interface documentation for NASA Goddard Space Flight Center CubeSat projects. The scope of work focuses on coding instrument control software and data handling protocols specifically for high-speed flyby imaging, utilizing embedded systems development tools and simulation environments. The selected provider will be responsible for delivering the final flight software, comprehensive operating documentation, and software interface control documents. This opportunity is managed through the NASA Shared Services Center under NAICS code 541511, with a response deadline of September 17, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

Flight-Qualified Imaging Sensor and PCB AssemblyThis subcontract with the NASA Shared Services Center involves the design and fabrication of monochrome imaging sensors and electronic control boards for CubeSat projects at the Goddard Space Flight Center. The scope of work includes integrating monochrome CMOS/CCD sensors and implementing power and data interfaces specifically for 12U CubeSats, utilizing space-grade PCBs and radiation-hardened components to ensure flight qualification. The final deliverable consists of an integrated sensor and electronics board. This opportunity is categorized under NAICS code 334511 and was posted on September 14, 2026, with a response deadline of September 17, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

High-Resolution Monochrome Optical System SupplyThis subcontract for the High-Resolution Monochrome Optical System Supply involves the manufacture and supply of optical assemblies for prime contractors on NASA Goddard Space Flight Center CubeSat projects. The scope of work includes precision grinding, polishing, and coating of optical elements using space-grade glass and radiation-hardened coatings to ensure a flight-qualified assembly. Technical requirements specify that the system must resolve surface features at 0.5 m/pixel or better with a minimum signal-to-noise ratio of 40. Managed by the NASA Shared Services Center under NAICS code 339112, the opportunity was posted on September 14, 2026, with a response deadline of September 17, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS