Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Ethyl Alcohol-Based Hand Sanitizer (NSN 8520-01-346-9200)

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of unscented, waterless hand sanitizer for prime contractors working on DLA Troop Support Medical Supply Chain projects. The required product consists of 4 fluid ounce bottles with a 70 percent ethyl alcohol base, delivered in packages of 24 bottles. To ensure quality and efficacy, the sanitizer must have a non-extendable 36-month shelf life, with no more than five months passing between the date of manufacture and the date of delivery. The contract is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance taking place at Fort Campbell. All supplies must strictly comply with the Buy American Act, the Berry Amendment, and Medical Marking Standard No. 1. This procurement falls under NAICS code 325412 and is specifically for National Stock Number 8520-01-346-9200.

General Info

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

325412 - Pharmaceutical Preparation Manufacturing

Place of Performance

FORT CAMPBELL, KY, 42223-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-27-T-0608.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SANITIZER, HAND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies unscented, waterless hand sanitizer for prime contractors on DLA Troop Support Medical Supply Chain projects. Provides 4 fluid ounce bottles with a 70% ethyl alcohol base. Ensures a non-extendable 36-month shelf life with no more than five months elapsed from manufacture to delivery. Complies with Buy American Act, Berry Amendment, and Medical Marking Standard No. 1. Delivers one package of 24 bottles.

Similar Contracts

Same NAICS industry code

Pressure Sensitive Adhesive Plastic Strip SupplyThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of clear, abrasion- and solvent-resistant polyurethane plastic strips for prime contractors on DLA supply contracts. The required materials must meet 3M P/N 8681HS specifications, featuring a removable paper backing liner score-slit at 1-inch intervals. The order consists of 23 rolls of 36-yard strips, each maintaining a shelf life of 24 months. The contract mandates strict compliance with NAVSEA J100-003D mercury-free and FED-STD-313 asbestos-free standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 325412, with the place of performance located in San Diego, California. The response deadline for this procurement is October 26, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

Epinephrine Injector

Solicitation # SPE2D2-26-R-0009

The Defense Logistics Agency (DLA) Troop Support Medical Supply Chain is soliciting proposals for a national requirements contract for Epinephrine 0.3 MG/0.3 ML Auto-Injectors. This unrestricted, fully competitive acquisition is a firm-fixed-price contract consisting of a one-year base period with four one-year options. The resulting contract will establish a national supply source to provide these commercial items to the Department of Defense, Department of Veterans Affairs, Indian Health Service, and Bureau of Prisons through DLA and VA prime vendor programs. The procurement is conducted under FAR Part 12 for commercial items, with a Lowest Price Technically Acceptable (LPTA) award basis. Proposals are evaluated based on technical requirements and past performance, with the award going to the responsible offeror providing the lowest evaluated aggregate price. The solicitation, numbered SPE2D2-26-R-0009, requires offerors to submit electronic proposals via the DIBBS portal by November 16, 2026. Key technical specifications include strict packaging requirements, such as the use of non-glass cylindrical bottles with a minimum 100cc volume, child-proof closures, and specific linear bar-coding conforming to GS1-128 or HIBC standards. All manufacturing facilities must comply with FDA current Good Manufacturing Practices (cGMP). The awarded contractor must be prepared to fill orders within 45 calendar days of award, with prices becoming effective within 60 days. Delivery is coordinated through separate business-to-business agreements with Pharmaceutical Prime Vendor distribution centers.

MEDICAL SUPPLY CHAIN FSGB

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Febuxostat Tablets

Solicitation # SPE2D2-26-R-0012

Solicitation SPE2D2-26-R-0012 is a requirements contract issued by the Defense Logistics Agency Troop Support Medical Supply Chain for the procurement of Febuxostat tablets in 30-count bottles. The requirement covers two strengths: 40mg and 80mg tablets. The acquisition is conducted as a Lowest Price Technically Acceptable (LPTA) procurement, where the award is granted to the responsible offeror who is determined to be technically acceptable and provides the lowest evaluated aggregate price. Technical acceptability is based on compliance with the Statement of Work and a review of past performance, including the status of FDA warning letters, violations, or failed inspections. The contract mandates strict adherence to FDA current Good Manufacturing Practice (cGMP) standards and requires products to have valid New Drug Applications (NDA) or Abbreviated New Drug Applications (ANDA), specifically preferring a Therapeutic Equivalence Code of A. Packaging must meet precise specifications, including a cylindrical bottle with a minimum 100cc volume, a 5.75-inch minimum circumference, and a child-proof safety cap. Labeling must be GS1-128 or HIBCC compliant and include linear bar coding at the unit-of-use level. Offers must be submitted exclusively through the Defense Logistics Agency Internet Bid Board System (DIBBS). Following several amendments, the final closing date for the receipt of offers is October 29, 2026, at 3:00 PM EST. Proposals must be organized into a non-price volume and a price proposal volume, including a Letter of Certification on manufacturer letterhead and specific FDA disclosures. The contract structure includes a base year and four option years, with an estimated base quantity of 76,388 bottles for the 40mg tablets.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

6505--Lab Supplies - Radiopharm Philadelphia VA Medical Center

Solicitation # 36C24427Q0018

The Department of Veterans Affairs Network Contracting Office 4 is soliciting quotations for an indefinite-quantity contract to provide radiopharmaceuticals and calibration sources for the Nuclear Medicine Department at the Corporal Michael J. Crescenz VA Medical Center in Philadelphia, Pennsylvania. The contract covers a base period from November 1, 2026, to October 31, 2031, with four additional option years. The selected vendor must be licensed and accredited by the Nuclear Regulatory Commission and comply with all regulations from the DOT, FDA, OSHA, and NHPP. Key deliverables include various cold kits and specific radiopharmaceuticals, with strict delivery requirements: routine orders must be received by 8:00 AM the following workday, and same-day orders must be delivered within two hours during normal business hours. The government will award the contract based on a comparative evaluation of price and past performance from the last three years, utilizing simplified acquisition procedures for commercial products. Technical requirements include specific labeling for radioactive materials and unit doses, as well as the provision of bar-labeled inserts for integration with the PineStar nuclear medicine information management system. If the contractor's system differs, they must provide data migration and training at no additional cost. Invoicing is to be submitted monthly and electronically via the Austin Payment Center. The solicitation is unrestricted, though price evaluation preference is provided for HUBZone small business concerns.

244-NETWORK Contract Office 4 (36C244)

POSTED

about 12 hours ago

DEADLINE

in about 19 hours

Supplier of Electrical Insulation Tape (NSN 5970010139369)This subcontract involves the supply of 6,000 rolls of electrical insulation tape meeting NSN 5970010139369 critical application standards for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The tape must have a non-extendable 18-month shelf life and be delivered FOB Destination to Portsmouth. All products must be marked and packaged in strict accordance with MIL-STD-129 and MIL-STD-2073-1E. The selected supplier must adhere to the Buy American Act and Berry Amendment requirements. Additionally, the contractor is required to maintain cybersecurity compliance as outlined in NIST SP 800-171. This opportunity falls under NAICS code 325412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of White Electrical Insulation Tape (NSN 5970002848565)This subcontract involves the supply of white electrical insulation tape to support prime contractors for the DLA Weapons Support Nuclear Reactor Program. The required tape must adhere to NSN 5970002848565 and CID A-A-59770A specifications, featuring a nominal length of 2160 inches, a width of 0.750 inches, and a thickness of 0.0070 inches. All products must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001. The finished rolls are to be delivered FOB Origin to Dobbins AFB and the USNS Washington Chambers. This procurement falls under NAICS code 325412 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Docusate Sodium Capsules SupplierThis subcontract opportunity is for the supply of pharmaceutical-grade Docusate Sodium 10 mg capsules to support prime contractors under the Department of Defense Medical Supply Chain Pharm FSA. The supplier must manufacture capsules that strictly adhere to USP standards and FDA regulations, ensuring a 36-month shelf life and maintaining controlled room temperature storage between 20 and 25 degrees Celsius. The contract requires the provider to hold RX Only licensing and comply with the DLA Master List of Technical and Quality Requirements. Deliverables consist of five packages containing 100 unit dose capsules each. Interested parties should note the response deadline of October 19, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Poison Ivy Treatment Skin Wash SupplierThis subcontract involves the supply of a topical skin wash solution for the treatment of poison ivy, oak, and sumac to support prime contractors on Department of Defense Medical Supply Chain Pharm FSA projects. The required product must be provided in 1-ounce tubes that adhere to NSN 6505016112071 specifications and maintain a shelf life of 120 months. The supplier must be FDA registered and ensure full compliance with Medical Marking Standard No. 1 and MIL-STD-129. The contract stipulates the delivery of one unit of the skin wash FOB Destination to South Charleston, West Virginia. This opportunity falls under NAICS code 325412.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Zolmitriptan Tablet Supply

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Supply of Dextrose in Lactated Ringer's InjectionThis subcontract involves the supply of sterile, nonpyrogenic, and latex-free Dextrose in Lactated Ringer's Injection for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The scope of work requires the manufacture or sourcing of 1,000 ml containers with a specific chemical composition including Dextrose Hydrous, Sodium Chloride, Sodium Lactate, Potassium Chloride, and Calcium Chloride. The contract specifically calls for the delivery of five packages of NSN 6505001161064 to be performed at Fort Bragg. Strict adherence to FDA regulations is mandatory, and the provider must comply with the Buy American Act and Berry Amendment. This opportunity falls under NAICS code 325412 and is managed by the Medical Supply Chain Pharm FSA. Interested parties must note the response deadline of October 19, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Sodium Chloride 0.9% Injection ManufacturerThis subcontract involves the manufacture and supply of finished medical products for prime contractors supporting the Department of Defense Medical Supply Chain Pharm FSA. The selected provider will produce sterile Sodium Chloride 0.9% Injection, specifically filling and sealing 500 ML containers in packages of 24. All products must adhere to USP standards and maintain a minimum shelf life of 24 months. To qualify, the manufacturer must operate a sterile pharmaceutical facility and maintain active FDA registration. The contract falls under NAICS code 325412 and focuses on the delivery of finished, packaged medical supplies to meet specific government requirements.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Albuterol Inhalation Aerosol SupplierThis subcontract involves the supply of prescription-only Albuterol Inhalation Aerosol to prime contractors supporting Department of Defense medical supply chain projects. The required product consists of pressurized aluminum canisters providing 90 mcg of albuterol base per actuation for a total of 60 actuations, equipped with a counter, plastic actuator, and strapcap. All supplies must be FDA approved and adhere to Medical Marking Standard No. 1. The contract specifies the delivery of 10 units, each maintaining a minimum remaining shelf life of 15 months. Performance for this requirement is located at Fort Campbell, Kentucky, under the oversight of the Medical Supply Chain Pharm FSA. The solicitation was posted on October 13, 2026, with a response deadline of October 19, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Supply of Sterile Hypodermic Syringes and NeedlesThis subcontract through the Department of Defense Medical Supply Chain MD Surg FSF involves the provision of sterile, plastic, disposable hypodermic syringes and needles for prime contractors. The required units must be 3 ML in volume with 23 Gauge, 1 inch needles, packaged in quantities of 100 per package. All supplies must strictly adhere to ASTM D3951, MIL-STD-129, Medical Marking Standard No. 1, and meet NSN 6515-00-149-1206. A critical requirement for these medical devices is a non-extendable shelf life of 60 months. The contract falls under NAICS code 339112 and requires the delivery of completed shipments to a performance location in FPO 96661. Interested parties must respond by October 20, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Multi-Functional Emergency Trauma DressingsThis subcontract involves the manufacture and supply of sterile, multi-functional emergency trauma dressings for the Department of Defense under the Medical Supply Chain MD SURG FSF. The required bandages must measure 6 inches wide by 56 inches long and include a sterile non-adherent pad, four Velcro securing strips, an elastic wrap, and a closure device. To ensure product viability, all dressings must have a 60-month shelf life and be delivered within 9 months of the date of manufacture. Performance for this contract is based in FPO 34085, with the primary objective being the delivery of completed emergency trauma dressing units.

Surgical Appliance and Supplies Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Digital Hypothermia ThermometersThis subcontract involves the supply of 27 digital hypothermia thermometers under NSN 6515-01-540-9946 for the Department of Defense Medical Supply Chain MD SURG FSF. The required devices must feature an extended temperature range of 78.0 to 111.9 degrees Fahrenheit, provide readings within 20 to 30 seconds, and utilize replaceable 1.55V LR41 batteries. Each unit must be provided with a clear two-piece plastic storage case. All deliverables must adhere to MIL-STD-2073-1E packaging requirements and general medical acquisition standards. The contract is designated as FOB Destination with the place of performance located at APO 09227-0000. The procurement falls under NAICS code 423450.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

MIL-STD-2073-1E Packaging and Delivery ServicesThis subcontract, titled MIL-STD-2073-1E Packaging and Delivery Services, is a Women-Owned Small Business set-aside issued by the Department of Defense for the Medical Supply Chain MD Surg FSF. The project requires the performance of military-grade packaging and shipping for prime contractors, specifically involving the delivery of 800 fully packaged and marked units. All work must adhere to strict regulatory standards, including MIL-STD-2073-1E for packaging, Medical Marking Standard No. 1, and MIL-STD-129 for shipment marking. The scope of work includes managing logistics for FOB Destination delivery to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. Operating under NAICS code 488510, the contract was posted on October 14, 2026, with a response deadline of October 20, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Production of Colt M4 Simulation Long GunsThis subcontract involves the production of 800 Colt M4 simulation long guns for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work requires the fabrication of weapon chassis and external components using non-additive manufacturing methods to accurately replicate the weight and ergonomics of the M4. All deliverables must strictly adhere to the Berry Amendment and the DLA Master List of Technical and Quality Requirements. The project is designated as a Women-Owned Small Business set-aside under NAICS code 339999, with performance taking place in New Cumberland. Interested parties must respond by October 20, 2026, to fulfill the requirements for the Medical Supply Chain MD Surg FSF agency.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Medical Device Military Packaging and MarkingThis subcontract, titled Medical Device Military Packaging and Marking, involves providing specialized packaging and marking services for 2,000 units of medical equipment destined for Taiwan. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the project requires strict adherence to military standards, specifically MIL-STD-2073-IE Packing Level B for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for marking. To ensure the integrity of the equipment during international transit, the contractor must utilize specialized cushioning and preservative materials. The opportunity was posted on October 14, 2026, with a response deadline of October 21, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

High-Flow Infusion & Blood-Fluid Warmer Systems SupplyThis subcontract involves the supply of 2,000 complete high-flow blood-fluid warmer and pressure infusion systems to prime contractors supporting Department of Defense medical supply contracts. Each unit must be delivered as a comprehensive system including necessary accessories such as IV poles, reservoir holders, power cords, and carrying cases, along with the required operator and service manuals. To ensure regulatory compliance, all provided medical devices must have FDA approval and include a Certificate of Conformance in accordance with FAR 52.246-15. The procurement is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF agency.

Surgical Appliance and Supplies Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Digital Hypothermia ThermometersThis subcontract involves the supply of digital hypothermia thermometers to prime contractors supporting DLA Troop Support medical supply contracts for the Department of Defense. The required devices must feature a temperature range of 78.0 to 111.9 degrees Fahrenheit with an accuracy of plus or minus 0.2 degrees, utilize LR41 batteries, and be provided with two-piece plastic storage cases. The contractor is responsible for delivering completed medical devices that are marked according to Medical Marking Standard No. 1 and packaged in compliance with MIL-STD-2073-1E. This procurement falls under NAICS code 423450 and is managed by the Medical Supply Chain MD Surg FSF, with the place of performance located at APO 09227-0000.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

THERMOMETER, DIGITAL, HY

Solicitation # SPE2DS-27-T-0672

Solicitation SPE2DS-27-T-0672 is a request for quotations from the Defense Logistics Agency for the procurement of three digital hypothermia thermometers under NSN 6515-01-540-9946. The required devices must feature an extended measurement range of 78.0-111.9 degrees F (plus or minus 0.2 degrees F) or 26.0-43.9 degrees C (plus or minus 1 degree C), provide results within 20 to 30 seconds with a beep signal, and include a replaceable 1.55V LR41 battery capable of 1,500 measurements. Each unit must be supplied in a clear two-piece plastic storage case. Delivery is required within 84 days after the order, with the destination point set as the WCCC USA Med Mat Ctr Eur in Germany. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires commercial packaging in sealed unit containers and suitable exterior shipping containers. Inspection and acceptance will occur at the destination. The procurement is governed by various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act. Payment must be processed electronically through the Wide Area WorkFlow system. Offers involving additive manufacturing are ineligible for award, and the solicitation is categorized under NAICS code 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

THERMOMETER, DIGITAL, HY

Solicitation # SPE2DS-27-T-0671

Solicitation SPE2DS-27-T-0671 is a federal procurement for 27 digital hypothermia thermometers under NSN 6515-01-540-9946 for the Medical Supply Chain MD Surg FSF. The required devices must feature an extended measurement range of 78.0-111.9 degrees F (+/- 2 degrees F) or 26.0-43.9 degrees C (+/- 0.1 degrees C), provide results within 20-30 seconds with a beep signal, and include a replaceable 1.55V LR41 battery capable of 1,500 measurements. Each unit must be supplied with a clear two-piece plastic storage case. Delivery is required within 84 days after the order date, with the destination and acceptance point located at the WCCC USA Med Mat Ctr EUR in Germany. The contract mandates strict adherence to commercial packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Each unit must be in a sealed container within a suitable commercial exterior shipping container. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Offerors must be registered in the System for Award Management under NAICS code 339112 and submit quotations via the DLA Internet Bid Board System by October 20, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

INFUSION SET, HIGH FLOW

Solicitation # SPE2DS-27-Q-0002

Solicitation SPE2DS-27-Q-0002 is a Firm Fixed Price acquisition issued by the DLA Troop Support Medical Supply Chain for a Foreign Military Sales requirement. The contract is for the procurement of 2,000 high-flow blood-fluid warmer infusion sets (NSN 6515-01-684-4542). Each unit must be delivered as a complete system including a pressure infusion system, IV pole, reservoir holder, operator and service manuals, carrying case, power cord, and eye hook and hanger. Delivery is required within 30 days after receipt of order, with shipping destined for Taichung City, Taiwan. The procurement is governed by strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for labeling. Inspection and acceptance are set at the origin, with the FDA acting as the inspector and acceptor via the Wide Area Workflow system. Bidders must provide the source and part number being supplied and are required to upload a Certificate of Conformance per FAR 52.246-15. Evaluation will consider price, with a specific preference given to HUBZone offerors, and the agency may conduct price realism analysis. Quotations are due by October 21, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 7 hours ago

DEADLINE

SYRINGE AND NEEDLE, HYP

Solicitation # SPE2DS-27-T-0670

Solicitation SPE2DS-27-T-0670 is a fixed-price procurement issued by the DLA Troop Support Medical Supply Chain for sterile, plastic, disposable hypodermic syringes and needles. The specific requirement is for NSN 6515-00-149-1206, featuring 23 gauge 1 inch needles and 3 ml capacity, delivered in packages of 100 units. The items are designated as Type I (Code S) with a non-extendable shelf life of 60 months. Delivery is required within 20 days after receipt of order, with the destination and acceptance point set as the USNS Salvor ARS 52. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129, and Medical Marking Standard No. 1, with the DLA Master List of Technical and Quality Requirements taking precedence. Bidders must specify the source and part number being supplied and provide a complete data package for any proposed alternate parts. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity regulations for safeguarding covered defense information.

Surgical and Medical Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS