Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of High-Temperature Calibration Bath Units

Active

Federal

Response Deadline07/29/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply and delivery of one Fluke Model 6055 High Temperature Bath Deep-Well unit capable of operating between -40°C and 150°C at 60Hz/115VAC, specifically intended for use in U.S. Army calibration laboratories. The equipment must meet precise technical specifications to ensure accurate temperature calibration standards are maintained across military testing and maintenance operations. The unit will be delivered to Redstone Arsenal, Alabama, with the delivery location already established to support ongoing DoD calibration infrastructure needs. This is a small business set-aside subcontract under NAICS code 334513, reserved exclusively for small businesses as defined by the Small Business Administration. The solicitation was posted on July 14, 2026, with a firm response deadline of July 29, 2026, at 9:00 PM Eastern Time. The contracting activity falls under the Department of Defense, specifically the W6QK Acc-Rsa office, and the entire procurement is structured to promote small business participation while ensuring the delivery of mission-critical calibration equipment for Army use. All bids must adhere to the technical, delivery, and compliance requirements outlined in the solicitation to be considered for award.

General Info

Small business subcontract for Fluke 6055 bath delivery to Redstone Arsenal for Army calibration.

Agency

Department Of Defense → W6QK Acc-RsaView Agency

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

Redstone Arsenal, AL, 35898, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 09:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Rsa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Rsa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of one Fluke Model 6055 High Temperature Bath Deep-Well unit, operating from -40°C to 150°C at 60Hz/115VAC, for use in U.S. Army calibration laboratories.

Similar Contracts

Same NAICS industry code

Supply of Pressure Transducer (NSN 6695014260420)The contract involves the procurement and delivery of a military-specification pressure transducer identified by NSN 6695014260420, designed for integration into defense systems requiring precise and reliable pressure measurement under demanding operational conditions. The item must comply with all applicable federal and military standards to ensure compatibility, durability, and performance in critical defense applications. This subcontract is issued under the Defense Logistics Agency, operating within the Department of Defense, and falls under the NAICS code 334513 for electronic instrument manufacturing. The requirement is part of a broader effort to maintain supply chain readiness for essential defense components, with delivery expected to support ongoing and future military system operations. The solicitation was posted on July 17, 2026, and the performance location and specific delivery details are not fully specified, indicating potential flexibility in logistics coordination. The contract reference links to a DLA award record for further tracking and administrative handling.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

SWITCH, LIQUID LEVELThe contract pertains to the procurement of a liquid level switch, identified by NSN 5930-01-512-1058 and part number LS-35360-18 from SETRA SYSTEMS, INC., with a requirement for one unit delivered within five days to the USS MAKIN ISLAND LHD 8 at FPO AP 96672. Delivery is FOB destination with no tolerance for quantity variance, and inspection and acceptance occur upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking adhering to MIL-STD-129 and no special marking required. The item must be free from intentional addition of mercury or mercury-containing compounds unless exempted for specific functional uses such as batteries, lights, or instruments as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Shipping must be conducted via the fastest traceable means using VSM, strictly prohibiting parcel post, and transportation protocols follow DLAD procedures. The original required delivery date is June 29, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

ALARM-MONITORThe contract pertains to the procurement of 20 ALARM-MONITOR units identified by NSN 6340-00-052-6363, issued under solicitation SPE4A6-26-T-05EU by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 375 days after award, with performance to occur at Cherry Point, North Carolina. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, tailored quality requirements for manufacturers and non-manufacturers, and configuration change management procedures including formal engineering change proposals and variance requests. Inspection and acceptance must occur at the origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is required, though Item Unique Identification is waived per customer directive. Export control restrictions apply to technical data associated with the item, governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and received formal approval. The contract solicitation was posted on July 9, 2026, with responses due by July 17, 2026, and is classified under NAICS code 334513 for electronic component manufacturing. Primary point of contact is Stephanie Sandridge at DLA.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

66--DETECTOR, TEMPThis contract outlines the procurement of a temperature detector under solicitation N0010426QBZ57, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical Office in Mechanicsburg, Pennsylvania. The offer response deadline is August 17, 2026, and pricing is valid for 60 days after the closing date unless otherwise specified. The contract mandates strict adherence to technical and quality requirements as defined in the Individual Repair Part Ordering Data (IRPOD), which must be reviewed by the vendor at the BPMI e-Commerce site. Order of precedence is clearly established, with contract amendments taking priority over all other documents including drawings, specifications, and standards. Contractors must comply with specified document revisions and are prohibited from mixing portions of different revisions unless written approval is obtained. Delivery of the item must include a Certificate of Compliance per DI-MISC-81356 for each unique contract line item, and all packaging must meet applicable standards such as MIL-PRF-23199, with specific clarification on the use of green poly bags for cleanliness-controlled parts. The contract imposes stringent compliance obligations regarding material use, including a complete prohibition on intentional mercury content, and enforceable cybersecurity maturity model certification requirements issued under a November 2025 notice. Security prohibitions and exclusions as of February 2026, along with mandatory use of Workflow Pro, apply to data handling and submission. Equal opportunity requirements for veterans and workers with disabilities are enforced, and small business program representations must be accurately certified under deviation templates valid through 2026. Technical data packages must comply with DD Form 1423 formatting rules, including distribution statement codes, inspection and acceptance indicators, and data submission frequencies as defined in the contract schedule. Data submission requirements are tied to contractual milestones, and all deliverables must be provided with appropriate pricing group classification under Groups I through IV as defined by DoD guidance. All contractual documents are deemed issued upon electronic or other authorized transmission, and the government considers proposal acceptance as bilateral agreement. Vendors are required to seek prior approval for any deviations from technical or delivery requirements, providing full technical justification and supporting documentation to avoid rejection.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Supply of Motional Pickup Transducer (NSN 6695016156250)The contract calls for the supply and delivery of four precision motion transducers identified by NSN 6695016156250 to the Defense Logistics Agency in Tracy, California, with all items required to meet strict military packaging, marking, and hazardous materials compliance standards. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, aligning with FAR 19.5 guidelines. The North American Industry Classification System code 334513 indicates the work falls under the manufacture of instruments and related products for measuring and testing motion. Bids must be submitted by July 24, 2026, with the opportunity originally posted on July 16, 2026, and the performance location firmly established at the Tracy, CA facility with ZIP code 95304-5000. The contracting activity is under the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, and full details are accessible through the DIBBS portal.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Liquid Quantity Transmitter Manufacturing & SupplyThe contract encompasses the full lifecycle supply of 18 liquid quantity transmitters, requiring the contractor to handle all phases including design, manufacturing, testing, packaging, and delivery, all in strict compliance with DLA technical and quality standards. The work must meet rigorous defense specifications, ensuring reliability and performance under operational conditions, with final delivery targeted to Robins Air Force Base, Georgia, at the designated zip code. This is a subcontract issued under the Department of Defense, specifically managed by the ASC Supplier Oper OEM Division, with the NAICS code 334513 identifying it within the instrument manufacturing sector. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, providing a narrow window for qualified suppliers to submit proposals. All deliverables must adhere to federal defense procurement protocols, and performance must align with the required standards for military-grade instrumentation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Specialized Supplier for Pressure Indicator (NSN 6685016204213)The contract seeks the supply of four units of a pressure indicator designated by NSN 6685016204213, with strict adherence to military standards including MIL-STDs, NAVSEA, and DLA specifications to ensure compliance with defense-grade performance and quality criteria. The item is required for delivery to a U.S. Department of Defense facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and must be provided by a qualified subcontractor operating under the NAICS code 334513 for instrument manufacturing. The solicitation was posted on July 16, 2026, and responses must be submitted no later than July 24, 2026, providing a limited timeframe for qualified vendors to prepare and submit proposals. The contracting entity is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, indicating this is a specialized procurement aimed at securing critical instrumentation for military or naval systems. While no set-aside preference is designated, the emphasis on regulatory compliance and precise technical specifications highlights the non-negotiable nature of the requirements. Vendors are expected to demonstrate capability in manufacturing and certifying pressure indicators to stringent government standards, and all proposals must be submitted through the DIBBS platform via the provided uiLink to be considered valid. Failure to meet any technical or procedural requirement may result in disqualification regardless of pricing or other factors.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Specialized Components (e.g., Proximity Switch)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

INDICATOR, PRESSUREThis contract pertains to the procurement of four units of a pressure indicator, identified by NSN 6685-01-620-4213 and part number DDMC-A-1 from AMETEK, Inc., under solicitation SPE4A5-26-T-291Z. Delivery is required within 139 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for delicate instruments. The item is classified as critical and must be packaged and shipped per DLA’s packaging requirements, with all hazardous material handling rules enforced, including the absolute prohibition of mercury or mercury compounds in preservation, packaging, and marking, except for specific exempted applications such as functional batteries or sensors as defined by NAVSEA. All portable devices containing mercury must include a secondary containment and be shockproof in compliance with NAVSEA 5100-003D. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, with sampling plans requiring zero non-conformances unless otherwise stated. Attributes are classified with strict verification levels or AQLs, and unspecified attributes are treated as major. Documentation must align with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision controls depend on acquisition type—simplified or large—with amendments overriding earlier revisions. The unit of issue is each, and the contract mandates adherence to all specified technical and quality provisions outlined in the DLA requirements, including transportation and shipping directives outlined in DLAD Proc Notes C19 and C20. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, and the contract type is federal, classified under NAICS 334513.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

TRANSMITTER, LIQUIDThe contract solicitation SPE4A5-26-Q-0629 calls for the procurement of 18 units of a TRANSMITTER, LIQUID QUANTITY with a total estimated value of $18, delivered within two days after order placement to DLA Distribution Warner Robins at Robins Air Force Base, Georgia. The item is subject to strict technical and quality standards incorporated by reference from the DLA Master List of Technical and Quality Requirements, with RA001 taking precedence over general commercial packaging standards such as ASTM D3951. Packaging and marking must comply with MIL-STD-129, including machine-readable barcodes, and specific DLA packaging requirements under RP001, though Item Unique Identification is excluded under DFARS 252.211-7003(c)(1)(i). Physical identification of bare items is mandated per RQ017, and all non-accepted supplies must have government identification removed as per RQ011. Technical data associated with the item is subject to export controls under ITAR or EAR, requiring compliance with DFARS 252.225-7048 and restricting access to contractors who hold valid US/Canada Joint Certification Program credentials, have completed mandatory DLA export control training, and obtained prior authorization from DLA. Cybersecurity requirements include CMMC Level 2 certification by a C3PAO, and all submissions must adhere to electronic invoicing via WAWF using approved document types, with no alternative systems permitted. Award will be made using a trade-off approach, with past performance being significantly more important than cost or price, and quoted delivery time considered approximately equal in importance to cost. Evaluation will heavily weigh historical quality, delivery compliance, and SPRs assessments under past performance. The contracting officer’s representative is not named, but the point of contact is Rasulbek Kilichev of the DLA Aviation ASC Supplier Oper OEM Division. The solicitation is not a small business set-aside, and offerors must provide their CAGE code and complete required representations for veteran employment and sustainable products, though no responses are populated in the provided text. Proposals must be submitted by July 23, 2026, via the DIBBS portal, email (under 15 MB), mail, hand delivery, or fax, with all documentation requiring adherence to DLA-specific technical, quality, and export control protocols. Inspection and acceptance occur at origin, governed by MIL

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

TRANSMITTER, LIQUIDThe contract pertains to the procurement of 18 units of a liquid quantity transmitter with NSN 6680-01-148-5821, issued under solicitation SPE4A5-26-Q-0627 by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 450 days after award, with performance to occur at Robins Air Force Base, Georgia. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, and is managed by Rasulbek Kilichev. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions aligned to the solicitation issue date for simplified acquisitions. The item is subject to strict export control under ITAR or EAR regulations, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons or entities, regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and explicit DLA authorization. Physical identification of the item is required per RQ017, but Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA standards, and all documentation must meet Source Approval Request requirements. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Covered defense information is applicable, and non-accepted supplies must have all government identification removed prior to return.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

TRANSDUCER, MOTIONALThe contract is for the procurement of a Transducer, Motional Pickup with NSN 6695-01-615-6250, under solicitation SPE4A5-26-T-293T, which is a total small business set-aside. Four units are required at a unit price of $4.00, for a total contract value of $16.00, with delivery required within 212 days from the contract award date, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 05 for delicate instruments, and palletization must adhere to DLA packaging requirements. The transducer is designated as a critical application item, and its identity is tied to two approved suppliers: MMC Metrology Lab, Inc. and AMETEK, Inc., both using part number 872DPW040S015. Sampling and quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury or mercury-containing compounds are strictly prohibited in materials, preservation, packaging, or marking except for specific exceptions like functional batteries or instruments approved by NAVSEA, which must include secondary containment. No shelf life requirement applies. Delivery must be sent to the specified DLA warehouse in Tracy, California, and transportation rules are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on July 16, 2026, with responses due by July 24, 2026, under NAICS code 334513, and is managed by the Department of Defense's ASC Supplier Oper OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

AH-64 Apache Spares Buy for the Manifold, Oil Filter - Nose GearboxThe Contractor is required to supply all necessary resources including labor, materials, equipment, and data to procure the Manifold Oil Filter – Nose Gearbox for the AH-64 Apache, identified by NSN 1615-01-616-1842 and Part Number 7-511325340-001, with an estimated quantity range of seven to thirty-five units. Delivery is expected at a rate of one unit per month, though early full delivery is permitted, and the final delivery location remains undetermined. Although classified as a non-critical safety item, the Government does not own the technical data package for this part, nor can it acquire the rights to use, develop, or reverse engineer the data; only four approved manufacturers are currently authorized to produce this component: The Boeing Company, Pall Aeropower Corp., Purolator Facet Inc., and Jamica Bearings Company Inc. The acquisition will proceed under Simplified Procedures for Noncommercial Acquisitions per RFO Part 13, resulting in a Firm Fixed Price Indefinite Delivery Indefinite Quantity contract with a five-year performance period composed of five priced ordering periods. Offerors must submit their most favorable terms upfront, as the Government will evaluate quotes and award without discussion. This is a presolicitation notice only, not a request for quotes, and formal submissions will only be accepted after the official solicitation is released on SAM.gov, to which all potential offerors must be registered to participate. The solicitation number is W58RGZ-26-Q-0010, with a posted date of July 17, 2026, and a response deadline of July 31, 2026, managed by the Department of Defense through the Redstone Arsenal office.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Overhaul The Relay AssemblyThe contract solicitation, Amendment 0002 to W58RGZ-26-B-0006, seeks proposals for the overhaul of the Relay Assembly under a Total Small Business Set-Aside, restricting eligibility to small businesses as defined by the SBA. The North American Industry Classification System code is 335314, indicating the work falls within the electrical equipment manufacturing sector. The solicitation was posted on July 17, 2026, with responses due by August 13, 2026, at 10:00 PM Eastern Time. The office managing this procurement is the W6QK Acc-Rsa, part of the Department of Defense, located at Redstone Arsenal, Alabama, with no specific place of performance details provided. Primary point of contact is Brenda Nelson, reachable at 520-674-8588 or brenada.nelson.civ@army.mil, with Edward A. Peterson as the secondary contact at 520-674-8710 or edward.a.peterson4.civ@army.mil. Interested parties must submit proposals through the SAM.gov portal linked in the solicitation.

Relay and Industrial Control Manufacturing

POSTED

about 21 hours ago

DEADLINE

W58RGZ26B0004 Amendment 0003Amendment 0003 to contract W58RGZ26B0004 is a small business set-aside solicitation issued by the Department of Defense through the W6QK Acc-Rsa office located at Redstone Arsenal, Alabama. The solicitation is fully reserved for small businesses as defined under the SBA’s Total Small Business Set-Aside provisions outlined in FAR 19.5, and it pertains to the NAICS code 336413, which relates to guided missile and space vehicle manufacturing. The amendment was posted on July 16, 2026, with a firm response deadline of August 28, 2026, at 10:00 PM Eastern Time. The place of performance details are not specified in the provided data, but the primary point of contact is Jason Howell, reachable via phone at 520-674-8706 or email at jason.l.howell4.civ@army.mil, with Edward A. Peterson listed as the secondary contact at 520-674-8710 or edward.a.peterson4.civ@army.mil. Interested parties can access the full solicitation details through the official SAM.gov workspace link provided.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Project Manager, Short and Intermediate Effectors for Layered Defense Maneuver-Short Range Air Defense Increment 3, Next Generation Short Range Interceptor ProductionThe U.S. Army’s Project Manager for Short and Intermediate Effectors for Layered Defense, under the Maneuver Short Range Air Defense (M-SHORAD) program, is issuing a Request for Information (RFI) to gather industry input on the production of the Next Generation Short Range Interceptor (NGSRI), a surface-to-air missile system designed to replace the Stinger and counter evolving aerial threats including rotary and fixed-wing aircraft and unmanned systems. This RFI, extended to July 26, 2026, is explicitly not an invitation to bid or a promise to issue a future contract; it serves solely as market research to evaluate industry capabilities, production readiness, and technical solutions for a planned production run of 11,000 missiles and 2,200 Control Launch Assemblies beginning in FY28. Responses must include detailed information on corporate structure, past experience in guided missile manufacturing, production capabilities, risk mitigation strategies, supply chain management, and cost and schedule estimates aligned with the Army’s production timeline, with proposed unit costs based on a ten-year horizon and assumptions around low-rate initial production volumes. All submissions must be unclassified, mark proprietary content clearly, and include a white paper not exceeding 20 pages. Respondents are required to address comprehensive technical and programmatic elements including integration of logistics support, training materials, total package fielding, and Full Material Release processes. The RFI seeks information on manufacturing readiness levels, achievable minimum and maximum production rates, retrofitting costs for compatibility with existing Stinger launcher platforms, and data rights for technical documentation. Companies must identify their business size under NAICS code 336414, specify any small business certifications, and disclose subcontractor involvement, particularly with non-traditional defense contractors or disadvantaged businesses. Responses must be sent via email to designated Army contracting officials by the deadline, with no phone inquiries permitted. The government will use all received submissions to assess industry capacity and inform future acquisition decisions, reserving the right to seek clarifications and emphasizing that no reimbursement will be provided for response costs. All information submitted becomes government property and will not be returned.

Guided Missile and Space Vehicle Manufacturing

POSTED

DEADLINE

Overhaul of RADIATOR, GEARBOX

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO)The U.S. Army Contracting Command – Redstone Arsenal is soliciting innovative commercial solutions through the Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO) numbered W9124P26SC001 to strengthen the Army’s Organic Industrial Base and extend advanced manufacturing capabilities to the tactical edge. This continuous solicitation leverages multiple federal authorities including 10 U.S.C. § 3458, 10 U.S.C. § 4022, Revolutionary FAR Overhaul 6.101(b)(3), and the Employee Stock Ownership Pilot Program to facilitate flexible, non-traditional acquisition pathways for cutting-edge technologies. The focus is on proposals that close critical capability gaps, enhance manufacturing readiness, and improve efficiency across the Army’s industrial and operational ecosystems, with an emphasis on scalable, commercially viable products and processes. Responses are accepted through two mechanisms: direct submission to general Areas of Interest or in response to time-limited Calls for Solutions, both of which are detailed in the governing documentation. All submissions must align with the requirements outlined in the Army AdvM CSO document, with the Active Capability Gap mailbox referenced in Section 4.1. The Government retains the right to update the CSO at any time, replacing prior versions with conformed revisions clearly highlighted in yellow to ensure transparency. Requests for Information posted under this solicitation serve solely for market research and do not obligate the Government to issue a follow-on Call for Solutions. The solicitation remains open indefinitely until formally canceled, but individual Calls for Solutions will have specific submission deadlines. Primary point of contact for inquiries is Stephanie Dillon at usarmy.redstone.acc.mbx.acc-rsa-advm-cso@army.mil, and all participants are urged to monitor the official SAM.gov portal for updates and amendments.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Supply of Compact Temperature Bath UnitsThe contract seeks the supply and delivery of two Fluke Model 7340-16 Compact Temperature Bath units, specifically configured to operate within a temperature range of -40°C to 150°C at 60Hz and 115VAC, for use in mission-critical temperature calibration at the Army Physical Standards Labs. These units are essential for maintaining precise thermal standards in defense-related testing environments, where accuracy and reliability are paramount. The equipment must meet strict performance and operational specifications to support laboratory functions that directly impact personnel readiness and equipment compliance. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 334513, which pertains to instruments and related products manufacturing. The solicitation was posted on July 14, 2026, with a response deadline of July 29, 2026, at 9:00 PM Eastern Time. Performance of the contract will be centered at Redstone Arsenal, Alabama, with a ZIP code of 35898. The contracting activity is managed by W6QK Acc-Rsa under the Department of Defense, and the opportunity is exclusively available to qualified small businesses as defined by federal guidelines.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Purchase of Tool Kit, AircraftThe U.S. Department of Defense, through the Office of W6QK Acc-Rsa located at Redstone Arsenal, Alabama, is seeking to procure a tool kit for aircraft under a total small business set-aside contract identified as W58RGZ-26-Q-0004 Amendment 0004. This solicitation is exclusively reserved for small businesses as defined by the Small Business Administration, per FAR 19.5, and falls under the NAICS code 332216, which pertains to industrial mold and die manufacturing. The opportunity was posted on July 14, 2026, with a firm deadline for responses by August 17, 2026, at 11:00 p.m. Eastern Time. The place of performance has not been specified beyond the agency’s location, and delivery is expected to support military aircraft maintenance and operational readiness. Aysia Young serves as the primary point of contact for this procurement, reachable via email at aysia.l.young.civ@army.mil or by phone at 520-851-9942, with Edward A. Peterson listed as the secondary contact at edward.a.peterson4.civ@army.mil or 520-674-8710. Interested small business vendors must submit proposals in accordance with the terms outlined in the amendment and adhere to all federal acquisition regulations. All communications and submissions should be directed to the designated contacts, and further details on requirements, specifications, and evaluation criteria can be accessed through the official SAM.gov portal using the provided UI link.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

in about 1 month

Temperature BathsThe U.S. Army TMDE Activity is seeking a brand-name or equivalent procurement of three temperature bath units under a Firm-Fixed-Price contract, designated as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 334513. The requirement calls for one Fluke Model 6055 High Temperature Bath, capable of operating between 200°C and 550°C at 60Hz/220VAC, and two Fluke Model 7340-16 Compact Temperature Baths, operating between -40°C and 150°C at 60Hz/115VAC, to replace aging calibration equipment at the Army Physical Standards Labs located in Building 5435 at Redstone Arsenal, Alabama. Delivery must be made to the specified address with all units required to be fully functional and ready for immediate deployment. The solicitation, numbered PANRSA26P0000033423949, was posted on July 14, 2026, with responses due by July 29, 2026, and is open exclusively to small businesses certified under the Small Business Administration’s program. There are no specified delivery timelines, FOB terms, or contract options outlined, and no formal pricing, CLIN structure, or contract value is provided. While technical specifications are tightly defined by model number and performance parameters, no formal inspection criteria, packaging standards such as MIL-STD-129, or acceptance testing procedures are detailed. The evaluation methodology is not stated, though the Firm-Fixed-Price nature suggests a potential Lowest Price Technically Acceptable approach. Point of contact for delivery is Matthew Watts, and inquiries may be directed to Wanda Little or Portia Sampson, though no Contracting Officer, COR, or COTR is formally identified. No representations, certifications, or submissions from offerors are included in the documentation, and no special requirements for security clearances, OCI, or key personnel are indicated. Payment procedures, invoicing methods, and accounting data such as TAS or AAC are unspecified, and the solicitation does not provide instructions on proposal format, page limits, media acceptable for submission, or whether electronic submission through a federal portal is required.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Overhaul of the Wiring Harness, BranchedThe U.S. Army Contracting Command-Redstone Arsenal is conducting market research under solicitation W58RGZ-26-R-0078 to identify qualified sources capable of manufacturing and supplying 78 units of the UH-60 Wiring Harness, Branched, designated by NSN 6150-01-463-9806 and part number 406876-01. This is not a solicitation for proposals, and no funding is available for response preparation; responses are voluntary and do not obligate the government to award a contract. The requirement is classified under NAICS code 336413 with a small business size standard of 1,250 employees, and the Product Service Code is 6150. Contractors must demonstrate the ability to obtain proprietary data from BAE Systems, as the government does not hold the necessary design rights, and must prove they can meet all special tooling and test equipment requirements either through physical possession, confirmed requisitions, subcontracting, or a detailed plan to develop equivalent tools. Interested parties must submit a capabilities statement of no more than ten pages in Microsoft Word or PDF format to Contract Specialist Mariel Chambers by 5:00 p.m. Central Time on July 31, 2026, with the solicitation number clearly indicated. Submissions must include organizational details, point of contact information, and tailored documentation proving technical and operational capacity, including any intended teaming or subcontracting arrangements. All submitted information marked as proprietary will be protected by the government. Additionally, contractors must be System for Award Management (SAM) registered and approved for providing spares to the government, with Subcontractor Authorization Request (SAR) submissions directed to the ALC SAR Inbox. Responses must not include classified material, and no feedback or evaluations will be provided on submissions.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MAINT & Repair/Replace LetterkennyThe U.S. Army TMDE Activity is seeking a small business contractor to perform maintenance, repair, and replacement of environmental control systems at the TMDE Support Center located at Letterkenny Army Depot in Chambersburg, Pennsylvania. The work includes replacing four indoor evaporators (with existing metal structures retained), four condensing units, and rooftop units installed via crane, along with upgrading the control systems by replacing existing temperature and humidity controllers with PLC controllers housed in new 24x24 NEMA enclosures. A stand-alone PC with VT SCADA software must be provided to monitor, trend, and store data, and the PLCs must be programmed to replicate existing HVAC control parameters. New control panels will be installed to interface with existing equipment, and full startup support and operator training are required. Additionally, the contractor must deliver a written summary of laboratory conditions, including deficiencies and recommended repairs, along with a record of environmental certification. The contract is a firm-fixed-price vehicle under a total small business set-aside, with NAICS code 811210, and requires the original equipment provider who installed the systems during prior renovations to perform the work. Delivery of all items and completion of services must occur within 30 days of order placement, with overall performance expected within twelve months of award. All proposals must be submitted via email by the revised deadline of July 20, 2026, and must include full company information, CAGE code, Unique Entity Identifier, and detailed technical representations confirming compliance with all specified requirements. Offers must clearly state unit and total pricing, any discounts, and confirm adherence to the 30-day delivery schedule. Proposals will be evaluated on a pass/fail basis against minimum technical requirements, with award based on best value combining price and technical capability. Contractors must comply with FAR clause 52.204-9 for personal identity verification of personnel and adhere to Department of Defense security protocols, including NCIC-III and Terrorist Screening Database adjudication for non-CAC holders. The government will provide workspace, storage, and access to equipment at no additional cost. The Force Protection Condition may require changes to security procedures during performance, and all work must occur during normal business hours, Monday through Friday, 0730–1630, unless otherwise scheduled with the government point of contact, Michael Hershey. Quotes received after the deadline or lacking required documentation will be rejected without review.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-01-464-1898)The contract requires the manufacture, packaging, and delivery of up to 375 machine screws designated by NSN 5305-01-464-1898, to be furnished in five equal ordering periods of 75 screws each, with deliveries staggered over time. Each screw must comply fully with military specifications and include unique item identification (UID) marking as mandated. All shipments are to be delivered FOB Origin, meaning the supplier assumes responsibility and risk until the goods are loaded at their facility. The contracting activity is under the Department of Defense, specifically administered by W6QK Acc-Rsa, with performance taking place at Redstone Arsenal, Alabama. The solicitation was posted on July 9, 2026, and responses are due by August 6, 2026. This is classified as a subcontract under NAICS code 332321, pertaining to screw, nut, and bolt manufacturing, with no set-aside designation specified.

Metal Window and Door Manufacturing

POSTED

DEADLINE