Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Hot Dip Galvanized Square Flat Washers

Active

State & Local

Response Deadline10/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 10,750 hot dip galvanized square flat washers to support prime contractors working on Nashville Electric Service utility projects. The required specifications for the washers are 2-1/4 inches by 2-1/4 inches by 3/16 inches with a 13/16 inch hole. To ensure quality and standardization, the contractor must manufacture or procure these units from approved manufacturers such as Hubbell, Maclean, or Powerline. The project is based in Nashville, Tennessee, and requires the delivery of all physical units within a specified delivery window. Interested parties should note that the response deadline for this solicitation is October 21, 2026.

General Info

Procure 10,750 galvanized square flat washers for Nashville utility projects by October 21, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5374.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Washer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 10,750 hot dip galvanized square flat washers for prime contractors on Nashville Electric Service utility projects. Manufactures or procures washers to 2-1/4" x 2-1/4" x 3/16" dimensions with a 13/16" hole. Requires use of approved manufacturers including Hubbell, Maclean, or Powerline. Delivers 10,750 physical units to the agency within the specified delivery window.

Similar Contracts

Same NAICS industry code

Manufacturing and Supply of Key Washers (NSN 5310-00-151-8784)This subcontract involves the precision manufacturing and supply of 10 Key Washers under NSN 5310-00-151-8784 for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating the units to exact military specifications and ensuring strict quality assurance through sampling and inspection per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformance. The project is governed by several critical regulatory standards, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Performance for this contract will take place in Cherry Point, North Carolina, under NAICS code 332722.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Self-Locking Hexagonal Nuts (NSN 5310-00-060-2039)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supplier of Self-Locking Hexagon Nuts with Extended WashersThis subcontract involves the supply of 44 units of self-locking hexagon nuts with extended washers for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced according to NSN 5310-01-589-9865 and must be produced without the use of hexavalent chromium. Delivery is specified as FOB Origin, with performance taking place in New Cumberland. The contractor is required to adhere to strict quality assurance and packaging standards, utilizing MIL-STD-1916 or ASQ H1331 for sampling and ASTM D3951 and MIL-STD-129 for packaging and labeling. This requirement is issued under the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture of Threaded Pin-Rivet Collars (NSN 5320-01-117-4256)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Close Tolerance Screw Fabrication

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320-01-665-4247)This subcontract involves the supply of 134 units of blind rivets, specifically NSN 5320-01-665-4247, to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The rivets must be manufactured or sourced in strict compliance with MIL-R-24243/7D and MIL-R-24243/1E standards. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with packaging and labeling adhering to ASTM D3951, MIL-STD-129, and RP001 specifications. The contract mandates strict adherence to domestic sourcing requirements under the Buy American Act and the Berry Amendment, as well as compliance with DFARS 252.204-7012. Performance will take place in Albany, Georgia. Interested parties must respond by October 23, 2026, for this requirement categorized under NAICS code 332722.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Slotted Washer Fabrication

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Collar, Pin-Rivet (NSN 5320-01-108-7656)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supplier of High-Precision Machine Screws (NSN 5305009845678)This subcontract involves the supply of 16 high-precision machine screws, identified by NSN 5305009845678, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to TDP Rev A Gen 1, FF-S-92E(1) Revision E, and NASM35206 Revision 4 specifications. Performance will be measured by a zero-nonconformance standard through quality sampling conducted per MIL-STD-1916 or ASQ H1331. The contract requires full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards. Work is associated with NAICS code 332722 and will be performed in New Cumberland. Interested parties must have responded by the deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Aerospace Fastener ManufacturingThis subcontract for Precision Aerospace Fastener Manufacturing involves the production of 380 finished and inspected shoulder screws for prime contractors supporting the DLA Weapons Support ASC. The project requires precision machining, turning, and quality control in strict accordance with McDonnell Douglas Corp part number 68A250582-1003 and NSN 5305-01-324-8962. To successfully execute the work, the manufacturer must utilize CNC lathes, mills, and specialized casting or forging tooling. Compliance and certification requirements are stringent, necessitating that the provider holds CMMC Level 2, ITAR/EAR compliance, and JCP Certification. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of NAS6216-24D Shear Bolts

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Lock Washer Manufacturer/Supplier

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

3M Super Weatherstrip Adhesive SupplierThis subcontract agreement establishes the requirements for a supplier to provide automotive-grade adhesive for prime contractors working on Nashville Electric Service procurement projects. The selected vendor is responsible for sourcing and delivering six tubes of 3M-AUTO 08001 Super Weatherstrip Adhesive to Nashville. To ensure quality and compliance, the contract strictly mandates the use of authentic 3M-AUTO branded products, explicitly prohibiting the use of alternate brands. The procurement process is governed by NAICS code 423840, with a response deadline set for October 21, 2026. The successful supplier must adhere to the specified delivery timeframe to support ongoing project operations. Interested parties can find further details and submission guidelines through the Nashville Electric Service vendor portal.

Industrial Supplies Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

15KV Indoor Bar Type Current TransformersThis subcontract involves the manufacture and supply of 600:5 15 KV Indoor Bar Type Current Transformers for prime contractors working on Nashville Electric Service procurement projects. The units must be manufactured to meet IEEE 0.15 metering accuracy standards from 1 percent nominal current through the rating factor. Each unit requires specific NES identification, to be applied via CNC machining on name plates or embossed aluminum strips. The scope of work requires the delivery of three fully tested and labeled transformers to Nashville, Tennessee. This opportunity is categorized under NAICS code 335311 and is associated with the Nashville Electric Service in Tennessee.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Current Transformer

Solicitation # Z5382

Nashville Electric Service is soliciting bids for the procurement of three 600:5 15 KV Indoor Bar Type Current Transformers. The equipment must meet IEEE metering accuracy of 0.15 from 1 percent nominal current through the rating factor. The specified approved source is Arteche CID-17-750969120 or an equal alternative. Vendors quoting an alternate brand must provide the brand name in the comments field and attach all relevant descriptive literature. Strict marking and labeling requirements apply, as the manufacturer must attach NES numbers provided at the time of the purchase order. These numbers must be either embossed on a 1/2 by 3-1/2 inch aluminum strip attached to the name plate or CNC machined on the name plate with 3/8 inch tall lettering, and must also be listed on the outside of the shipping container. Bids must be submitted via the Bid Center by 2:00 pm local time on October 21, 2026. Evaluation factors include technical compliance and the earliest delivery time stated in calendar days, which may be considered in the final award decision.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Weatherstrip Adhesive

Solicitation # Z5383

Nashville Electric Service is soliciting bids under solicitation Z5383 for the procurement of six units of Super Weatherstrip Adhesive tubes. The required product is specifically 3M-AUTO 08001, and the agency has explicitly stated that alternate brands will not be accepted for this inquiry. Bidders are required to provide their earliest delivery timeframe in calendar days, as the delivery schedule may be a determining factor in the award of the contract. All bids must be submitted through the Bid Center by 2:00 pm local time on October 21, 2026. The primary procurement contact for this solicitation is Alan Martinez. Vendors are responsible for contacting the buyer for clarification regarding any discrepancies between ordering descriptions and part numbers prior to the closing date.

Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

Remanufactured Brake Shoe Rear Kit SupplierThis subcontract agreement establishes the supply and delivery of 22 remanufactured lined brake shoe rear kits for prime contractors working on Nashville Electric Service procurement projects in Nashville. The contract specifically requires Meritor Q Plus XK557-4707QP kits that meet a 23,000 lb GAWR and feature dimensions of 16.5 by 7.0 inches. To ensure safety and performance, all units must comply with FMSI 4707 non-asbestos, medium-high friction standards and maintain compatibility with Type 30 chamber x G slack adjusters. The procurement falls under NAICS code 441330, with a response deadline set for October 20, 2026.

Automotive Parts and Accessories Retailers

POSTED

DEADLINE

Compressed Fibrous Electrical Insulating Sheets SupplierThis subcontract agreement involves the supply of compressed fibrous electrical insulating board panels for prime contractors working on Nashville Electric Service procurement projects in Nashville. The scope of work requires the delivery of five units of Benelux-type panels measuring 1/4 inch by 4 feet by 8 feet, available in either black or brown. Accepted materials must be sourced from Mason-Arboron, Mason-Phenelx, or approved equivalents that meet all specified electrical insulating properties. The solicitation was posted on October 14, 2026, with a response deadline of October 21, 2026, falling under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Utility Pole Freight and Unloading ContractorThis subcontract involves providing truck freight transport and on-site unloading services for prime contractors working on Nashville Electric Service utility projects. The selected contractor is responsible for hauling 135 treated poles to various designated yards within Nashville, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of flatbed trucks along with crane trucks or knuckle booms to facilitate the physical unloading of the poles. To qualify, personnel must possess a valid CDL and proper equipment operator certification. This opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide 135 treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The supplier is responsible for sourcing materials using either Southern Pine or Douglas Fir, adhering strictly to NES Specifications 33-151R13 and 33-252R10. Additionally, the contractor must perform roofing and gaining according to NES Drawing 910 and coordinate all necessary third-party inspections to ensure quality compliance. The final deliverable consists of 135 inspected and treated 45ft Class 2 wooden poles. This procurement opportunity is categorized under NAICS code 321999 and is managed by the Nashville Electric Service in Tennessee. Interested parties must adhere to the established timeline, with the response deadline set for October 26, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

500 MCM General Purpose Connector SupplierThis subcontract agreement involves the procurement and delivery of 50 UL-listed general purpose connectors to support prime contractors on Nashville Electric Service supply contracts. The required hardware must be 500 MCM connectors rated for aluminum or copper conductors, featuring set screw connections pre-filled with inhibitor and 9/16 inch mounting holes designed for meter base studs. Acceptable equipment is limited to part numbers UTILCO TA-500P516 or CONNECTO LA500I. The contract is managed under NAICS code 423610 with performance taking place in Nashville, Tennessee. Interested parties must adhere to the timeline established by the Nashville Electric Service, with the solicitation posted on October 14, 2026, and a response deadline of October 19, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Hot Dipped Galvanized Double Arming BoltsThis subcontract involves the supply of specialized utility-grade double arming bolts for prime contractors working on Nashville Electric Service electrical distribution projects in Nashville. The scope of work requires the manufacture or sourcing of 160 units of 3/4 inch by 24 inch bolts featuring fully rolled threading, cone type points, and four square nuts. The technical specifications mandate that the bolts be made from high-strength steel meeting an ultimate strength of 18,350 lbs and must be treated with hot dipped galvanization. All units are to be delivered packed in standard cartons. The solicitation was posted on October 14, 2026, with a response deadline of October 22, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # Z5374

Nashville Electric Service is soliciting bids under solicitation number Z5374 for the procurement of 10,750 hot dip galvanized square flat washers. The required specifications for these items are 2-1/4 inches by 2-1/4 inches by 3/16 inches with a 13/16 inch hole. To ensure technical compliance, the agency will only accept specific manufacturers and part numbers, including UTILISVC 5485, GRID POW U1076, PWERLINE P1076, MACLEAN J1076, KORTICK K1553, and ALLIED B 11550. Alternate brands are strictly prohibited for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on October 21, 2026. A critical component of the evaluation process is the delivery timeline, as bidders must state their earliest delivery in calendar days, and this factor may be considered in the final award decision. The primary procurement contact for this solicitation is Tiffany Caruthers. Vendors are responsible for resolving any discrepancies between ordering descriptions and part numbers with the buyer prior to the closing date.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # Z5373

Nashville Electric Service is soliciting bids for the procurement of 50 general purpose connectors under solicitation Z5373. The required connectors must be UL listed and rated for aluminum or copper, supporting one conductor up to 500 MCM with a set screw connection filled with inhibitor. Each connector must feature a 9/16 inch hole for mounting to a stud in a meter base. Acceptable parts are limited to Utilco TA-500P516 or Connecto LA500I, and alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on the closing date of October 19, 2026. Evaluation factors for the award include technical compliance and the earliest delivery time stated in calendar days. The primary procurement contact for this solicitation is Bailey Allen. Performance and delivery are centered in Nashville, Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS