Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Hot-Dip Galvanized Square Flat Washers

Active

State & Local

Response Deadline11/09/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 400 hot-dip galvanized square flat washers for prime contractors working on Nashville Electric Service utility infrastructure projects in Nashville. The required hardware must measure 4 by 4 inches with a 3/16 inch thickness and feature centered 7/8 inch holes. To ensure corrosion resistance, all units must have a hot-dip galvanized finish and correspond to approved part numbers MACLEAN J1080, COOPER DF2W10, or UTILSVC 5488. The contract was posted on November 3, 2026, with a response deadline of November 9, 2026. It falls under NAICS code 332510 and is managed through the Nashville Electric Service vendor portal.

General Info

Agency

Tennessee → Nashville Electric Service

NAICS

332510 - Hardware Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5487.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Washer Square Flat

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 08:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies hot-dip galvanized square flat washers for prime contractors on Nashville Electric Service utility infrastructure projects. Manufactures or sources 400 units of 4" x 4" x 3/16" washers with centered 7/8" holes. Applies hot-dip galvanized finish for corrosion resistance. Supplies specific approved part numbers: MACLEAN J1080, COOPER DF2W10, or UTILSVC 5488. Delivers 400 EA specialized hardware units.

Similar Contracts

Same NAICS industry code

Supply of Solid Rivets (NSN 5320009827919)This subcontract involves the supply of 2,500 solid rivets under NSN 5320009827919 for the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the rivets and ensuring they meet strict packaging and labeling standards, specifically ASTM D3951, RP001, and MIL-STD-129. Performance will take place at Robins Air Force Base. To qualify, the provider must maintain ISO 9001:2015 inspection systems and complete a CMMC Level 2 cybersecurity self-assessment. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment. Responses to this solicitation are due by November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Ammunition Rack Strap HooksThis subcontract involves the manufacture and supply of specialized ammunition rack strap hooks for prime contractors supporting the Department of Defense. The contractor is responsible for producing the physical hooks, straps, and ammunition racks in strict accordance with the detailed drawings and specifications for NSN 2590-00-999-9847. Because these are classified as Critical Application Items, the manufacturer must adhere to rigorous material grades and precise tolerances to ensure operational safety and functionality. The finished goods are to be delivered to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. This procurement falls under NAICS code 332510 and is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The solicitation period is open from November 4, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Turnlock Fastener Stud Assembly ManufacturingThis subcontract involves the precision manufacturing of 296 turnlock fastener stud assemblies for the DLA Weapons Support Aviation Supply Chain. The assemblies must be produced according to NSN 5325-00-775-851 and strictly adhere to DLA requirements RA001, RP001, RQ011, and RQ017. The project demands high-precision machining and the use of materials that are fully compliant with the Berry Amendment. Logistical requirements include adherence to ASTM D3951 and MIL-STD-129 packaging standards. The work is categorized under NAICS code 332510 and will be performed in New Cumberland. Interested parties should note the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Ring Cutter (NSN 5365-01-162-3593)This subcontract, issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, requires the procurement and delivery of one Ring Cutter identified by NSN 5365-01-162-3593. The hardware must be delivered in strict accordance with DLA Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001. The place of performance for this delivery is designated as FPO 96322-1400. Interested prime contractors must have the capability to submit quotes through the DIBBS portal. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026. The contract falls under NAICS code 332510 and focuses on the delivery of a single packaged unit meeting all specified technical requirements.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

Supply of Threaded Pin-Rivets (NSN 5320012811878)This subcontract involves the supply of threaded pin-rivets to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The required hardware must match NSN 5320012811878 and adhere to approved part numbers BACB30PB6-13X or TL210-6-13. The scope of work includes ensuring all aerospace fasteners meet strict technical specifications and DLA packaging requirements, culminating in the physical delivery of the shipment to the designated point. The opportunity is categorized under NAICS code 332510 and was posted on November 4, 2026, with a response deadline of November 12, 2026. Interested parties must ensure all deliverables align with the rigorous standards set for aerospace hardware to maintain compliance with the prime contract and agency expectations.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Manual Control Handles (NSN 5340-01-588-4016)This subcontract involves the manufacture or sourcing of Manual Control Handles under NSN 5340-01-588-4016 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must ensure all parts comply with the DLA Master List of Technical and Quality Requirements RA001 and adhere to RP001 packaging and palletization standards for final delivery. Eligible bidders must possess a valid CAGE code and UEI. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 16, 2026, in accordance with the solicitation posted on November 4, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-671-9489)This subcontract involves the manufacture or procurement of three mounting plates identified by NSN 5340-01-671-9489 for the DLA Weapons Support Aviation Supply Chain. The contractor must ensure all products comply with the Buy American Act and adhere to prohibitions regarding hexavalent chromium. Delivery is required FOB Origin to Jacksonville, with strict adherence to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-1916. Administrative requirements include mandatory cybersecurity compliance in accordance with NIST SP 800-171. The project falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must meet the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Plain Blind Rivet Nuts (NSN 5310-01-716-2320)This subcontract involves the supply of 289 plain blind rivet nuts to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The hardware must strictly adhere to NSN 5310-01-716-2320 specifications to ensure compatibility and quality for Department of Defense requirements. All items must be packaged according to ASTM D3951 and RP001 standards, with marking and labeling performed in compliance with MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325011893898)This subcontract involves the supply of specialized retaining rings, identified by NSN 5325011893898, to support prime contractors working with the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing rings that strictly adhere to military part standards, utilizing precision measurement tools for zero-based sampling validation. All deliverables must include comprehensive quality assurance documentation and follow specific identification marking requirements. Compliance is mandatory regarding sampling procedures, which must be performed according to MIL-STD-1916 or ASQ H1331 Table 1, with markings applied per MIL-STD-130N. The performance of this contract is centered in Mechanicsburg, Pennsylvania, under NAICS code 332510. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supplier of Non-Electrical Wire (NSN 6520013354600)This subcontract involves the supply of non-electrical Cold Rolled Steel wire, specifically 14-inch long D7 round wire organized in 10 strips per tube, for prime contractors supporting DLA supply contracts. The materials must be manufactured and delivered in two packages to a FOB destination in Fort Bragg. The supplier is required to adhere to strict quality and regulatory standards, including MIL-STD-2073-1E and Special Packaging Instructions MPPWN00001 for packing, and Medical Marking Standard No. 1 for item marking. Additionally, the contractor must ensure full compliance with the Buy American Act and the Hazard Communication Standard 29 CFR 1910.1200.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 10 hours ago

DEADLINE

Supply of Straight Headed Pins (P/N SK3806-26)This subcontract involves the supply of 81 units of Yale Industrial Products straight headed pins, part number SK3806-26, for prime contractors supporting DLA Weapons Support ASC projects. The work is managed under the Department of Defense and is associated with NAICS code 332510, with the place of performance located at Hill AFB. The contractor is responsible for ensuring all items undergo physical identification and bare item marking in accordance with RQ017. Additionally, sampling must be conducted following MIL-STD-1916 or ASQ H1331 Table 1 standards. All properly marked and sampled pins must be delivered by February 2027.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-00-141-1795)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of 17,110 flat washers identified by NSN 5310-00-141-1795. The project is designated as a total small business set-aside under NAICS code 332510, with performance taking place in Tracy, California. The contractor must ensure all units are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129, specifically including the NSN, Lot Number, and CAGE codes. Additionally, the provider must maintain a valid CAGE code and demonstrate full compliance with the Army Aviation Critical Safety Item Production Sample Test Pilot Program to successfully deliver the completed order.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of 6-2 ACSR Wedge-Type Triplex ClampsThis subcontract involves the procurement and delivery of 12,150 6-2 ACSR wedge-type triplex clamps with straight bails for use on Nashville Electric Service projects. These components are intended for service drop cable messengers and must be sourced from approved manufacturers, specifically Hubbell SW7195LB, REOS ENT REWDC-2S, or Reliable 7195. The contract is designated for prime contractors or utility providers, with all units to be delivered to Nashville, Tennessee. The solicitation is categorized under NAICS code 423610 and is managed by the Nashville Electric Service in Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Air Dryer Cartridge Supplier (Meritor/Alliance ABP)This subcontract opportunity is for a qualified authorized distributor to supply 80 genuine air dryer cartridges for Freightliner M2 Series vehicles used in Nashville Electric Service fleet projects. The contractor is required to source and deliver authentic OEM parts, specifically Meritor TDA/R950011 or Alliance ABP N13 35130010860, ensuring that all provided components match the exact approved manufacturer part numbers. The selected supplier will be responsible for the delivery of these parts to Nashville, Tennessee. Interested parties must submit their responses by November 9, 2026, to support prime contractors operating under NAICS code 441330.

Automotive Parts and Accessories Retailers

POSTED

DEADLINE

Supply of Altec Hydraulic Element FiltersThis subcontract involves the procurement and delivery of 30 genuine Altec hydraulic element filters, specifically part number 035330030, for use in HD35 Earth Augers. These components are intended for prime contractors working on Nashville Electric Service equipment projects in Nashville. The contract strictly mandates the use of genuine Altec brand filters, explicitly prohibiting the use of any alternate brands. The opportunity was posted on November 3, 2026, with a response deadline of November 9, 2026. Classified under NAICS code 423840, the agreement covers the sourcing, packaging, and delivery of the specified units to support agency operations.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Altec 10 Micron Polyester Hydraulic FiltersThis subcontract involves the procurement and delivery of 30 genuine Altec 10 micron polyester hydraulic filters, specifically part number 970486122, for use in HD35 Earth Augers. These components are intended for prime contractors working on Nashville Electric Service equipment projects in Nashville. The contract strictly mandates the use of genuine Altec brand filters, explicitly prohibiting the use of any alternate brands. The opportunity was posted on November 3, 2026, with a response deadline of November 9, 2026. It falls under NAICS code 423840 and is managed through the Nashville Electric Service vendor portal. The selected provider will be responsible for the sourcing, packaging, and delivery of the specified units to ensure compatibility and performance standards for the utility equipment.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Altec Hydrostatic Hydraulic Return Spin-on FiltersThis subcontract involves the procurement and delivery of 30 genuine Altec hydrostatic hydraulic return spin-on filters, specifically part number 035330026, for use in HD35 Earth Augers. These components are intended for prime contractors working on Nashville Electric Service equipment projects. The contract strictly mandates the use of genuine Altec brand filters, explicitly prohibiting the use of any alternate brands. The project is based in Nashville, Tennessee, and falls under NAICS code 423840. Interested parties must adhere to the timeline established by the Nashville Electric Service, with the response deadline set for November 9, 2026. The selected provider will be responsible for the sourcing, packaging, and delivery of the specified units.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Hazardous Waste Battery Collection and Disposal ServicesThis subcontract for Hazardous Waste Battery Collection and Disposal Services supports prime contractors working on Nashville Electric Service projects in Nashville. The selected provider is responsible for the pickup and environmentally compliant disposal of waste batteries of any manufacturer or type, utilizing an exchange basis for collection. To ensure safety and regulatory adherence, the contractor must employ hazardous materials transport vehicles and specialized containment systems for leaking units. The scope of work requires the contractor to provide formal written procedures for the management, handling, and disposal of waste batteries. Additionally, the provider must deliver documented proof of compliant disposal for all removed materials. This opportunity is categorized under NAICS code 562920 and is associated with the Nashville Electric Service.

Materials Recovery Facilities

POSTED

DEADLINE

BCI Group 65 Battery SupplierThis subcontract agreement establishes the supply of 12-volt calcium lead type batteries for prime contractors working on Nashville Electric Service projects in Nashville. The contract specifically requires BCI Group 65 maintenance-free batteries with top post terminals that meet RC150, CCA850, and CA1000 technical ratings. To ensure quality and compatibility, the supplier is restricted to providing approved brands, including INT BATT MTP-65, SUPERLEX AUT-658, DELCO 65GHR, or DEKA 665MF. Under the terms of the agreement, the supplier must provide a minimum 18-month free replacement warranty for all delivered units. The procurement falls under NAICS code 423840 and is managed through the Nashville Electric Service vendor system.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Cartridge-Type FusesThis subcontract agreement involves the procurement and delivery of one-time cartridge fuses to support prime contractors on Nashville Electric Service projects. The scope of work requires the supply of 450 total units, specifically 250 units of 3 Amp, 250 Volt fuses and 200 units of 30 Amp, 250 Volt fuses. All materials must be sourced from approved brands, which include Bussmann, Ferrez, Royal El, Economy, Gen Elec, Little (NLN3), or Eagle El (655). The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the response deadline of November 9, 2026. The procurement falls under NAICS code 335910 and requires the final delivery of all specified units to the designated agency location.

Battery Manufacturing

POSTED

DEADLINE

Solicitation # Z5484

Nashville Electric Service has issued solicitation Z5484 for the procurement of specific hydraulic filters for Altec HD35 Earth Augers. The requirement consists of three line items, each for a quantity of 30 units: hydrostatic hydraulic return spin-on filters (part 035330026), 10 micron polyester hydraulic filters (part 970486122), and hydraulic element filters (part 035330030). The procurement is strictly limited to the specified Altec parts, and alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on November 9, 2026. Offerors are required to state their earliest delivery time in calendar days, as the delivery schedule may be a determining factor in the award. For any discrepancies between part numbers and descriptions, vendors must contact the procurement officer, Alan Martinez, for clarification prior to the closing date.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Washer Square Flat

Solicitation # Z5487

Nashville Electric Service has issued solicitation Z5487 for the procurement of 400 hot dip galvanized square flat washers. The required specifications for the washers are 4 by 4 inches with a thickness of 3/16 of an inch and a 7/8 inch hole. To ensure technical compliance, only specific approved manufacturers and part numbers are acceptable, including Maclean J1080, Cooper DF2W10, Hubbel 6818, and Utilsvc 5488. Alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on the closing date of November 9, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. It is the responsibility of the vendor to contact the procurement contact, Tiffany Caruthers, for any clarifications regarding discrepancies between part numbers and descriptions prior to the deadline.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # Z5485

Nashville Electric Service has issued solicitation Z5485 for the procurement of one-time cartridge-type fuses. The requirement consists of 250 units of 3 Amp, 250 Volt fuses and 200 units of 30 Amp, 250 Volt fuses. Acceptable manufacturers are strictly limited to approved brands including Bussmann, Eagle El, Economy, Gen Elec, Royal El, Little, Ferraz, and Ferrez; alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on November 9, 2026. Offerors are required to specify their earliest delivery time in calendar days, as the delivery schedule will be a factor in the award decision. For any clarifications regarding part numbers or descriptions, vendors must contact the procurement lead, Shanna Faulk, prior to the closing date.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5486

Nashville Electric Service is soliciting bids under solicitation Z5486 for 6-2 ACSR wedge-type triplex clamps with straight bails, designed for service drop cable messengers. The procurement specifically requires approved parts from Hubbell (SW7195LB), REOS ENT (REWDC-2S), or Reliable (7195), and alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on the closing date of November 6, 2026. The award process will consider the earliest delivery time, which vendors must specify in calendar days. It is the vendor's responsibility to resolve any discrepancies between part numbers and descriptions with the procurement contact, Bailey Allen, prior to the deadline. Performance and delivery will take place in Nashville, Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Specialized Pins Supply

Dallas Area Rapid Transit

POSTED

DEADLINE

in about 17 hours

Galvanized Fir Moulding Staples Supplier

Nashville Electric Service

POSTED

CLOSED

about 7 hours ago

Conveyor Safety Equipment and Rail Supplier

DPU/Water Reclamation Department of City of Toledo

POSTED

DEADLINE

Bronze Casting & Tactile Model Fabrication

County of Fairfax

POSTED

DEADLINE

in about 1 month

Welded Access Door Hinges Supplier

Dallas Area Rapid Transit

POSTED

CLOSED

HINGE,ACCESS DOOR,WELDED,ACCESSORY - ref 2101176

Solicitation # 2101176

Dallas Area Rapid Transit

POSTED

CLOSED

Cage Lock Hardware Supplier

Department of Corrections

POSTED

DEADLINE

Solicitation # 46700-eRFQ-002105-2027

Department of Corrections

POSTED

DEADLINE

Supply of Heavy-Duty Nylon Lifting Slings

Nashville Electric Service

POSTED

CLOSED

about 7 hours ago

SERC Lock Inserts

Solicitation # 2120271016

University System of New Hampshire

POSTED

DEADLINE

Hardware and Component Supply for Battery Access Doors

Dallas Area Rapid Transit

POSTED

CLOSED

SLIDER ASSEMBLY, DRAWER LOCKOUT - ref 2101157

Solicitation # 2101157

Dallas Area Rapid Transit

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS