Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Industrial Safety Spectacles

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the procurement and delivery of four units of industrial safety spectacles, identified by NSN 4240016786069 and part number 4-0750-9001, intended for deployment at Fort Campbell, Kentucky. The requirement mandates full traceability throughout the supply chain, proper packaging to ensure product integrity upon arrival, and documented proof of delivery to confirm receipt at the designated location. The effort is classified as a subcontract under the NAICS code 339920, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 1, 2026, and while no specific set-aside designation is indicated, all deliverables must comply with federal procurement standards and performance conditions tied to the contract.

General Info

Procure four safety spectacles for Fort Campbell with full traceability and proof of delivery under DLA administration.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339920 - Sporting and Athletic Goods ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8EJ26F067V.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPECTACLES, INDUSTRIAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 4 units of industrial safety spectacles (NSN: 4240016786069, Part No.: 4-0750-9001) to Fort Campbell, KY, with traceability, proper packaging, and proof of delivery required.

Similar Contracts

Same NAICS industry code

Jacksonville International Trap Machines, Operating Equipment & Installations

Solicitation # FWC 26/27-19

Florida Fish and Wildlife Conservation Commission

POSTED

DEADLINE

Commercial-Grade Treadmill Supplier

W6QM Micc-Ft Drum

POSTED

DEADLINE

Electronic Scoring Target System

Solicitation # W911S226U4478

Solicitation W911S226U4478 is a Request for Quotation for the procurement of a new Electronic Scoring Target System for the Department of Defense, specifically the W6QM Micc-Ft Drum. This Total Small Business Set-Aside focuses on the acquisition of new SCOPOS brand equipment for use with the Athena Range and Orion Scoring System. The scope of work includes 20 NC100 target heads with cameras, 20 mechanical target lifts, 20 steel pellet traps, a one-year Orion for Clubs software license, and on-site installation services for 20 lanes. The procurement is a brand name or equal acquisition, requiring any alternative products to meet specific physical and functional characteristics and be supported by descriptive literature and model identification. The contract is awarded to the responsible offeror whose proposal is most advantageous to the government, based on price and technical evaluations. All quotes must be submitted via the PIEE Solicitation module and include a completed Buy American certification in Attachment 1 to avoid being rejected as non-responsive. Delivery is required on an F.O.B. destination basis, with a preferred delivery timeline of 30 days. Payment will be processed through Electronic Funds Transfer and the Wide Area Workflow system. Only new equipment is acceptable, as used or remanufactured products are strictly prohibited.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Bowling Alley Machine

Solicitation # FA252126QB159

FA2521 45 Cons Pk

POSTED

DEADLINE

Sorinex Fitness Training Equipment

Solicitation # FA252126QB155

The Department of Defense is seeking the procurement and delivery of brand-name Sorinex commercial-grade strength training equipment and rack attachments for the Government Strength and Readiness Training Facility. This combined contract, identified by solicitation number FA252126QB155, is designated as a total set-aside for small businesses under NAICS code 339920. The opportunity was posted on September 11, 2026, with a response deadline of September 18, 2026. The equipment will be utilized at Patrick AFB in Florida, and the contracting office is located at Patrick SFB. Primary coordination for this acquisition is managed by Cierra Hallmon and Isaiah Cisneros.

FA2521 45 Cons Pk

POSTED

DEADLINE

TEGUC - Gymnasium Equipment and Installation

Solicitation # 19H08026Q0057

US Embassy Tegucigalpa

POSTED

DEADLINE

Aqua Spin Bikes

Solicitation # FA465926QZ021

The United States Air Force, 319 CONS at Grand Forks AFB, North Dakota, is conducting a sources sought synopsis to identify capable providers for underwater Aqua Spin Bikes. This is not a solicitation for a contract but a request for capabilities packages from interested firms, including small businesses, 8(a), HUBZone, and Service-Disabled Veteran-Owned Small Businesses. The acquisition is categorized under NAICS code 339920 for Sporting and Athletic Goods Manufacturing, with a size standard of 750 employees. Interested respondents must be registered in the System for Award Management and provide details regarding their socio-economic status and any foreign ownership or use of foreign national employees. The required equipment must meet strict salient characteristics, including INOX AISI316L construction, a polyethylene shell with a stainless-steel frame, and a weight capacity of 350 pounds. Key functional requirements include an adjustable resistance system operated by a knob, suction cup feet for pool floor security, a water-filling stability bladder, and wheels on the base for mobility. The bikes must also feature adjustable horizontal and vertical handlebars and resistive pedals with reinforced neoprene shoes. Additionally, the provider must include instructor certification training and a two-year limited manufacturer warranty. Capabilities packages are due by September 7, 2026, at 2:00 PM CDT.

FA4659 319 Cons Pk

POSTED

DEADLINE

Solicitation # 26ART2629

The Department of Homeland Security, through the Federal Law Enforcement Training Centers (FLETC), is seeking firm-fixed-price quotes for the procurement of 100 freestanding punching bags for its facility in Artesia, New Mexico. This requirement is a total Small Business Set-Aside under NAICS code 339920. The equipment must meet or exceed the specifications of ProBoxingSupplies SKU PBS-BB72-RED-1, featuring a height of 72 inches, a weight of approximately 110 lbs, a weighted sand-filled base for instant vertical rebound, a 14-inch diameter striking area with high-density foam, and a heavy-duty military-grade textured vinyl rip-stop cover. Award will be granted to the responsible offeror providing the Lowest Price Technically Acceptable (LPTA) quote, with technical acceptability determined on a pass/fail basis. All shipping and freight charges must be included in the unit price of each CLIN, and delivery is required within 30 days of the contract award, preferably in two shipments or fewer. Interested small businesses must submit their price proposal, full product specifications with images, manufacturer warranty information, and Unique Entity Identifier (UEI) via email to the contracting officer and specialist by September 18, 2026, at 11:00 am MDT.

Fletc Artesia Operations

POSTED

DEADLINE

Electronic Scoring Target System

Solicitation # W911S226U4484

W6QM Micc-Ft Drum

POSTED

DEADLINE

MARKER, X-RAY FILM IDEN

Solicitation # SPE2DH-26-T-6654

This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of one set of X-ray film identification markers featuring uppercase Gothic letters R and L. The markers must adhere to specific physical dimensions, with character heights between 0.234 and 0.266 inches, thicknesses between 0.034 and 0.044 inches, and mounting strips measuring between 0.615 and 0.635 inches in length with a nominal width of 0.312 inches. The contract, identified by solicitation number SPE2DH-26-T-6654 and NSN 6525-00-604-7925, requires delivery within five days after receipt of order to San Antonio, Texas. Bidders must specify the source and part number being supplied and comply with DLA packaging requirements, technical quality standards, and regulations regarding the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Safety Cage Boxing Headgear (Large and Extra Large)

Fletc Artesia Operations

POSTED

DEADLINE

Punching Bag Supplier

Fletc Artesia Operations

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 22 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

about 22 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency (DLA) Land and Maritime has issued solicitation SPE7L7-26-Q-2417 for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The requirement specifies a delivery timeline of 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This contract carries stringent security and regulatory requirements. It requires CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export control under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the vendor must adhere to MIL-STD-2073-1E Level B for packaging and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor must provide a HAZDEC form and Material Safety Data Sheets in accordance with FED STD 313D and DFARS 252.223-7001.

Battery Manufacturing

POSTED

about 22 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS