Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Integro Power Stream Controllers (6 x 30FR Drops, 4FT)

Active

Federal

Response Deadline08/03/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of eight Integro Power Stream controllers, specifically configured as 6 x 30FR drops with 4FT cable lengths, under a Total Small Business Set-Aside designation for small businesses as defined by the SBA. All units must comply with MIL-STD-129 labeling standards and include data matrix barcoding to ensure proper identification and tracking throughout the supply chain. Delivery is to be made on an FOB destination basis, meaning the vendor bears all costs and risks until the goods reach the designated delivery point. The solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 335311 for Electromechanical Component and Product Manufacturing. The contracting activity is managed by DLA Maritime - Pearl Harbor, a branch of the Department of Defense, and the contract is structured as a subcontract under a small business set-aside program.

General Info

Eight Integro Power Stream controllers supplied under small business set-aside, FOB destination, MIL-STD-129 labeled.

Agency

Department Of Defense → DLA Maritime - Pearl HarborView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

HI

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 10:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Pearl Harbor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Maritime - Pearl Harbor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 8 units of Integro Power Stream controllers with compliance to MIL-STD-129 labeling, data matrix barcoding, and FOB destination delivery requirements.

Similar Contracts

Same NAICS industry code

Power Transformer Manufacturing and SupplyThe contract mandates the design, manufacture, testing, and delivery of a military-specification power transformer identified by NSN 5950-01-699-0115, classified as a critical application item requiring strict adherence to Department of Defense standards. The transformer must comply with MIL-STD-2073-1E for packaging and storage, and MIL-STD-129 for labeling and marking, ensuring full integration into military logistics and supply systems. All work must meet the rigorous quality and performance benchmarks defined by DLA, with documentation and traceability required throughout production to guarantee reliability in operational environments. This is a subcontract opportunity under the MARITIME SUPPLY CHAIN ESOC BUYS unit of the Department of Defense, with a response deadline of August 7, 2026. The North American Industry Classification System code 335311 indicates the focus on transformer and inductor manufacturing. The place of performance and specific delivery location are not detailed, but compliance with all military handling, inspection, and documentation protocols is mandatory. The solicitation is accessible through the DIBBS platform, and bidders are expected to possess the technical capability and certification to produce defense-critical electrical components under stringent government oversight.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Power Transformer Supply and HandlingThe contract entails the supply and comprehensive handling of two military-grade power transformers under CLIN 0001, requiring full compliance with defense logistics standards for packaging, transportation coordination, and final delivery. All activities must meet stringent military specifications to ensure operational readiness and reliability in mission-critical environments. The work is to be performed with attention to secure handling protocols and delivery timelines aligned with Department of Defense requirements, with the place of performance designated as NEW CUMBERLAND, ZIP 17070-5002. This subcontract falls under NAICS code 335311, indicating classification within transformer manufacturing, and is managed by the MARITIME SUPPLY CHAIN organization under the Department of Defense. Responses must be submitted by the deadline of July 29, 2026, with the solicitation posted on July 24, 2026 through the DIBBS platform.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TRANSFORMER, POWERThe contract specifies the procurement of two power transformers with NSN 5950-01-256-8550 and part number 2907767, supplied by Parker-Hannifin Corporation, OECO, LLC, and Exxelia USA, Inc., under solicitation SPE7M1-26-T-209L. Delivery is required within 164 days of contract award, with a target ship date of January 5, 2027, and an original required delivery date of April 20, 2027. Items must be delivered FOB origin with zero variance allowed in quantity, inspected and accepted at the destination, and packaged per MIL-STD-2073-1E with marking compliant to MIL-STD-129 and no special marking required. Packaging details include preservative method 41, dry climate control, GBC wrap material, and intermediate containment of 12 units per container, with the final packaging code U. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict adherence to DLA’s Master List of Technical and Quality Requirements, incorporates cybersecurity compliance under CMMC Level 2 self-assessment, and mandates zero tolerance for intentional mercury or mercury compounds in the supplied hardware, except for approved functional uses such as batteries, fluorescent lamps, and sensors, which must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. All procurement actions are governed by DoD unit of issue standards and the contract remains under the oversight of the Department of Defense with Ryan Snyder as the primary point of contact.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TRANSFORMER, POWERThis contract specifies the procurement of a single power transformer identified by NSN 5950-01-699-0115 under solicitation SPE7M0-26-Q-1099, with a firm fixed price and no tolerance for quantity variance. The item is classified as a critical application component and must comply with technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking guidelines. Mercury or mercury-containing compounds are strictly prohibited unless functionally necessary in specified exceptions such as batteries, fluorescent lamps, or instrument controls, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The transformer must be delivered to the Military Sealift Command in San Diego, California, within 30 days after award, shipped by the fastest traceable means excluding parcel post, and FOB origin. All packaging, palletization, and labeling must conform to DLA-specific requirements, and the item is subject to inspection and acceptance at the destination. The government’s projected ship date is May 13, 2026, and contract data identifies Audrey Acuna of the Department of Defense as the primary point of contact.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CABLE ASSEMBLY, POWEThe contract pertains to the procurement of three electrical power cable assemblies, identified by NSN 6150016315772 and part number PC/TACPC20, under solicitation SPE4A6-26-T-07EG. Delivery is required within 80 days after the delivery order is issued, with a need ship date of October 13, 2026, and an original required delivery date of October 14, 2026. All items must be delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The unit price is $1.00 per unit, resulting in a total contract value of $3.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede all other standards. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1 using a zero-based approach, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Packaging must conform to ASTM D3951, but all DLA Master List requirements take precedence, and palletization must comply with RP001. Marking and labeling must adhere to MIL-STD-129, including barcoding per Data Matrix or linear standards, with bare item marking per RQ017. Removal of government identification from non-accepted supplies is required, and hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard or applicable federal regulations. The contract mandates full compliance with numerous FAR and DFARS clauses, including affirmative affirmations of employment eligibility, combating human trafficking, sustainable procurement, hazardous material disclosure, and safeguarding of defense information under NIST SP 800-171 and the Cyber Incident Reporting rule. Contractors must affirm their small business status and UEI/CAGE code if applicable, and joint ventures must disclose all partner UEIs. Invoicing must be submitted exclusively through WAWF using the Invoice and Receiving Report method. Inspection and acceptance occur at the destination by the government, with quality assurance governed by the referenced standards and the DLA Master List. The solicitation prohibits additive manufacturing processes and requires submissions via DIBBS only, with no paper submissions accepted. The contract type

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract pertains to the procurement of a single cable assembly identified by NSN 6150-01-651-1941 under solicitation SPE4A0-26-T-3918, issued by the Defense Logistics Agency’s Aviation Supply Chain ESOC Buys office. Delivery is required within five days after award to the designated destination at Stork Barracks, Building 6503, Illesheim, Germany, with the item classified as a non-commercial fixed-price supply acquisition. The contract incorporates extensive regulatory and technical requirements including adherence to MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and barcoding using Code 128 and Data Matrix, and compliance with DLA packaging requirements. The item is subject to export control under ITAR or EAR, mandating prior authorization for any disclosure to foreign persons or entities, and access to technical data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DLA training, and explicit authorization. Cybersecurity requirements demand compliance with NIST SP 800-171 and CMMC Level 2, enforced through the DFARS clause 252.240-7997 and safeguarding of covered defense information under 252.204-7008. All invoicing must be conducted electronically through Wide Area WorkFlow, and the government retains inspection and acceptance authority at the delivery point using defined AQL levels per MIL-STD-1916 or MIL-STD-105, requiring zero non-conformances for critical and major attributes. Offerors must submit representations regarding small business status, unique entity identifiers, CAGE codes, and compliance with anti-trafficking, employment eligibility, sustainable products, and hazardous materials prohibitions including the ban on hexavalent chromium. The contract includes clauses addressing subcontracting, payment acceleration for small businesses, unauthorized obligations, contract changes, and electronic submission of payment documents, with all provisions governed by a deviation 2026-00038 that updates multiple FAR and DFARS clauses to standardize compliance. Technical data referenced in the solicitation must be accessed only through the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date governs compliance. No evaluation factors are disclosed in the available documentation, and contract pricing details are not populated in the CLIN schedule,

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Integro Preheat Controllers (Model: 1OUT 4M20, 3PH 480V)The contract entails the supply of eight units of Integro Preheat SHU controllers, model 1OUT 4M20, 3PH 480V, with full adherence to military specifications, ensuring ruggedness and reliability for defense applications. Each unit must be individually marked with a Unique Item Identifier (UID) to meet Department of Defense tracking and asset management requirements, and comprehensive technical documentation must accompany delivery to support installation, maintenance, and operational use. The procurement is structured as a subcontract under a Total Small Business Set-Aside classification, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under NAICS code 335311 for Electric Lamp and Lighting Fixture Manufacturing. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, and is managed by DLA Maritime - Pearl Harbor under the Department of Defense, though no specific place of performance or point of contact details are provided.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Supply of 2 kVA 3-Phase Encapsulated Dry-Type TransformersThe contract calls for the procurement and delivery of 18 new 2 kVA 3-phase encapsulated dry-type transformers specifically for instructional use at the USCG Training Center in Yorktown, Virginia. All units must be delivered FOB Destination and fulfilled within 60 days of contract award, ensuring timely availability for training operations. The requirement is targeted exclusively at small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 335311 indicating classification within electrical equipment manufacturing. The solicitation is managed by the Special Mission Training Center under the Department of Homeland Security and is open for responses until August 7, 2026, with a deadline of 3:00 PM Eastern Time. The performance location is clearly designated as Yorktown, VA, with a zip code of 23690.

Special Mission Training Center (sm

POSTED

DEADLINE

Procurement of 18 New 2 kVA 3-Phase Encapsulated Transformers for USCG Training Center Yorktown EM 'A' School.The United States Coast Guard Training Center Yorktown is seeking to procure eighteen new 2 kVA 3-phase encapsulated transformers to support technical and instructional training programs. This solicitation, numbered 63100PR260047669, is issued as a request for quotation under part 12 of the Federal Acquisition Regulation and is set aside exclusively for small business concerns, with a NAICS code of 335311 and an 800-employee size standard. The transformers must be brand new, dry-type, and feature a 120V delta primary and 120Y/69V secondary configuration with ±5% taps, copper conductors, a NEMA 3R outdoor enclosure, and a minimum three-year manufacturer warranty. All units must be delivered FOB Destination to Yorktown, Virginia, no later than 60 days after award, with invoices submitted in arrears upon delivery and acceptance. Offers must be submitted by the deadline of August 7, 2026, and must include the solicitation number, offeror details, Unique Entity Identifier, compliance with the evaluation provisions at 52.212-2, required certifications, and a statement confirming full agreement with all terms. Proposals will be evaluated on a Lowest Price Technically Acceptable basis, with technical capability assessed through manufacturer documentation verifying compliance with all SOW specifications, delivery capability confirmed through written assurance of meeting the 60-day schedule, and price evaluated for completeness and reasonableness. The offeror must hold prices firm for 60 days after the submission deadline, and all offers must fully conform to the solicitation without exceptions. The government intends to award a firm-fixed-price contract without discussions, and the anticipated award date is ten days after solicitation close. All offerors are required to maintain active registration in SAM, and the award, if made, will result in a single purchase order.

Special Mission Training Center (sm

POSTED

DEADLINE

Solicitation, Rack, Electrical Equipment, NSN 5975-01-549-7992The U.S. Army Contracting Command – Detroit Arsenal is soliciting a single Firm Fixed Price contract for 45 units of Electrical Equipment Rack (NSN 5975-01-549-7992, Part Number 12653230) under solicitation W912CH-25-R-0066, which is a 100% Small Business Set-Aside. The procurement follows a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical acceptability is determined by full compliance with all requirements, including the Technical Data Package (TDP), which is export-controlled and accessible only to entities certified under the U.S./Canada Joint Certification Program. The delivery schedule requires fulfillment within 360 days of contract award, with FOB Destination terms placing all transportation costs and risks on the contractor until delivery to DLA Distribution Anniston, AL. The contract includes detailed packaging and marking requirements aligned with MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, mandating Unique Item Identification (UII), ISPM-15 compliant wood packaging with ALSC certification, and strict adherence to hazardous materials handling standards for both domestic and international shipments. Quality assurance is governed by MIL-STD-1916 and ISO 9001:2015, with inspections conducted at origin and acceptance at destination upon delivery. Proposals must be submitted electronically in three volumes – Technical, Price, and Administrative – by the deadline of August 7, 2026, with only amendments up to Amendment 0006 applicable. All offerors must hold a current UEI and CAGE Code, comply with FAR 52.204-23 regarding prohibited vendors, and submit representations affirming small business status. Additional requirements include OPSEC Level I training for all personnel, annual TARP training for cleared employees, compliance with DFARS 252.204-7012 for Controlled Unclassified Information handling, and certification of organizational conflict of interest mitigation. Invoicing must be submitted exclusively via Wide Area WorkFlow, and all files in the proposal must be virus-free, properly formatted, and adhere to strict naming conventions to avoid rejection.

POSTED

DEADLINE

WIRING HARNESS,BRANThis solicitation, N0010426QQC22, seeks firm-fixed-price quotes for the repair of the WIRING HARNESS,BRAN, with a required Repair Turnaround Time (RTAT) of 700 days from physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with applicable military standards including MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, and must follow manufacturer specifications and government-approved technical directives. The contractor is responsible for all inspection and testing, with records retained for 365 days post-final delivery, and government source inspection is mandatory. Pricing must account for all conditions of the asset, including unwhole, damaged, or incomplete units, and must be submitted with unit and total cost along with RTAT. Failure to meet the RTAT will result in a contractual price reduction per unit per month, up to a specified maximum, without limiting the government’s right to terminate for default. The contract includes an option for increased quantities exercisable within 365 days, with delivery rates continuing at the original contract pace unless otherwise agreed. The contract imposes strict compliance with Buy American and cybersecurity certification requirements, and mandates adherence to Small Business Subcontracting Plan and Security Prohibitions and Exclusions guidelines. Contractors must be authorized distributors of the original manufacturer’s item, with proof provided at submission. All freight is FOB Origin, and the Navy handles logistics under the CAV Statement of Work. A T&E fee not-to-exceed a defined amount applies if an item is determined beyond repair, and pricing must be justified if it deviates from historical rates. Contract performance location details, including CAGE codes for the awardee, inspection, and subcontractor facilities, must be provided, and all quotes must compare the repair price to the cost of purchasing a new unit. Documentation must include the original NSN and any prior part numbers, and all submissions must be accompanied by signed acceptance prior to contract execution. The solicitation closes August 10, 2026, and responses are to be submitted via the SAM.gov portal.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

INTEGRO, PREHEAT SHUVendors seeking to respond to Solicitation No. SPMYM4-26-Q-3591 for INTEGRO, PREHEAT SHU must submit their quotation, along with any required technical data sheet, via email to the Contracting Specialist at wongduean.a.guajardo.civ@us.navy.mil no later than August 3, 2026, at 10:00 PM Hawaii Standard Time. Complete Pages 1–3 and Pages 20–23 of the solicitation and ensure all fields are accurately filled out; failure to comply may render the quote non-responsive. If using a form other than SF 1449, a formal statement affirming full acceptance of all solicitation terms must accompany the submission. Quotations must be firm-fixed-price with no allowances for post-award adjustments, and vendors must unconditionally accept award at the quoted price without modification. All costs—including materials, labor, packaging, and delivery—must be included in the quoted price, and any request to revise pricing or terms after award will be treated as non-acceptance. Vendors are required to provide the Original Equipment Manufacturer name, brand, part number, and country of origin, with proof of OEM authorization or distribution credentials available upon request to verify authenticity and warranty validity. This solicitation is a total small business set-aside under NAICS Code 335311, administered by DLA Maritime – Pearl Harbor under the Department of Defense. Evaluations will prioritize technical acceptability, delivery capability, and price competitiveness. All inquiries must be directed via email to the designated contracting specialist.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Pearl Harbor

Same awarding agency

Packaging, Marking, and Shipping ServicesThis contract requires the provision of packaging, preservation, marking, and shipping services in full compliance with Department of Defense Logistics Agency standards, specifically adhering to DD Form 1155 and DLAD directives. The work involves preparing and consolidating military logistics shipments to designated Container Consolidation Points, ensuring all materials are properly protected, labeled, and documented for transport. The service must meet rigorous military logistics protocols to guarantee readiness, traceability, and operational efficiency throughout the supply chain. The contract is structured as a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 488999 for other support activities related to transportation. Offerors must respond by the deadline of July 28, 2026, with the opportunity posted on July 25, 2026. The awarding entity is DLA Maritime – Pearl Harbor under the Department of Defense, with performance expected at unspecified locations tied to military logistics hubs. All activities must align with federal procurement guidelines and support the broader defense logistics mission.

All Other Support Activities for Transportation

POSTED

DEADLINE

Additive Manufacturing Services for Prototypes or ToolingThe contract authorizes additive manufacturing services for non-mission-critical parts, tooling, or prototypes, requiring adherence to certified processes and prior government approval before fabrication. This subcontract is specifically designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility and participation are restricted to certified small businesses as defined by FAR 19.5. The North American Industry Classification System code 332999 applies, aligning the solicitation with other manufacturing services not elsewhere classified. The contracting activity is managed by DLA Maritime - Pearl Harbor under the Department of Defense, with all work expected to be performed in coordination with federal standards for quality and compliance. Responses must be submitted by the deadline of July 28, 2026, at 6:00 p.m. Eastern Time, and the opportunity was posted on July 25, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Structural Support Component FabricationThe contract calls for the fabrication of custom load-bearing brackets, frames, or structural supports designed specifically for vehicular assemblies, to be manufactured strictly in accordance with provided engineering drawings. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to compete, and the NAICS code 332311 confirms the work falls under metal fabrication for structural components. The solicitation was posted on July 25, 2026, with a firm response deadline of July 28, 2026, at 6:00 PM, leaving a narrow window for submissions. The contracting activity is managed by DLA Maritime - Pearl Harbor under the Department of Defense, and while the precise location for performance is not listed, the work is intended to support military vehicular systems. No point of contact is provided, and bidders must rely on the SAM.gov link for further details and submission requirements.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Manufacture of Wedge, Incompressible (Lead Edge/Fairing)The contract is for the high-precision manufacture of aerodynamic and hydrodynamic fairing components, specifically lead edge wedges, with strict requirements for material density control to ensure optimal performance in high-speed fluid environments. The work involves advanced fabrication techniques to meet exacting tolerances and material specifications critical for applications in aerospace or marine systems, where surface integrity and weight distribution are paramount. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, categorized under NAICS code 332999 for other fabricated metal product manufacturing. Issued by DLA Maritime - Pearl Harbor under the Department of Defense, the solicitation was posted on July 25, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact details are not specified, but performance is expected to align with Defense Logistics Agency standards and requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Production of Vehicular Body PanelsThe contract is for the fabrication of precision vehicular body panels using sheet metal forming, welding, and surface finishing processes to comply with military specifications. This subcontract is reserved exclusively for small businesses under the SBA Total Small Business Set-Aside program as defined by FAR 19.5, ensuring eligibility is limited to qualified small business concerns. The North American Industry Classification System code 332323 identifies the work within the scope of forged and stamped metal product manufacturing, indicating a focus on precision metal components for defense applications. The opportunity was posted on July 25, 2026, with a strict response deadline of July 28, 2026, at 6:00 PM, requiring proposals to be submitted within a narrow three-day window. Performance is tied to the Department of Defense through DLA Maritime in Pearl Harbor, though specific location details for delivery or manufacturing are not provided. The work involves meeting stringent quality and technical standards expected in military vehicle systems, demanding advanced capabilities in metal fabrication and finishes.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Fabrication of Hull Section, MidgetThe contract entails the fabrication of a vehicular hull section according to engineering drawing DWG 26M014303-35, with strict requirements for structural integrity, precise dimensional tolerances, and adherence to specified material standards. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and is classified under NAICS code 332322 for fabricated metal product manufacturing. The opportunity was posted on July 25, 2026, with a firm response deadline of July 28, 2026, at 6:00 PM Eastern Time. The contracting activity falls under DLA Maritime – Pearl Harbor, a component of the Department of Defense, though specific performance location details and point of contact information are not provided. All proposals must meet the technical specifications outlined in the drawing and comply with the small business set-aside provisions to be considered eligible.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Hull Section, Support Structure and Vehicular Body PanelThe contract titled Hull Section, Support Structure and Vehicular Body Panel is solicited under number SPMYM4-26-Q-3592 and is set aside entirely for small businesses as defined by the SBA under FAR 19.5. It is classified under NAICS code 332999 for other fabricated metal product manufacturing and was posted on July 25, 2026, with a response deadline of July 28, 2026, at 6:00 PM Eastern Time. The solicitation is a combined synopsis and SF-18 and is managed by DLA Maritime - Pearl Harbor, an office under the Department of Defense located in Pearl Harbor, Hawaii, with a zip code of 96860-5033. The primary point of contact for inquiries is Quincey Dillenback, reachable via email at quincey.dillenback.civ@us.navy.mil. The place of performance has not been specified, and interested parties may access additional details through the provided SAM.gov link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BRAND NAME - STRATASYS, FILAMENT REDThis solicitation, identified as SPMYM426Q3564, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 and Simplified Acquisition Procedures per FAR Part 13, with all provisions and clauses in effect through FAC 2025-06 and DFARS Change Notice 20251110. It is a 100% small business set-aside under NAICS code 326112, with a small business size standard of 1,000 employees, and requires all offerors to be registered in SAM.gov. The requirement is for 73 units of Stratasys filament, red, specifically the FORTUS 450MC ASA (RED) filament canister with manufacturer part number 355-02144, and no substitutions are permitted under any circumstance. The product must be sourced directly from Stratasys Corp. as listed on the approved vendor list, and vendor traceability documentation from the unredacted Stratasys quote is mandatory. Evaluation is strictly Lowest Price Technically Acceptable (LPTA), where technical acceptability is determined by compliance with specifications, submission of required descriptive literature, and inclusion of completed provisions including 252.204-7016, which is attached and required for consideration. All offers must include the completed RFQ form, manufacturer and country of origin for the item, FOB destination pricing to Pearl Harbor Naval Shipyard in Hawaii, CAGE code, point of contact, business size certification, and preference for payment via Government Commercial Purchase Card or Wide Area Workflow. Offers exceeding one per vendor will be rejected, and failure to submit traceability documentation or the required provisions will result in a technically unacceptable determination. The solicitation closes on July 28, 2026, at 1300 HST, with submissions accepted only via email to the designated point of contact. Delivery must comply with MIL-STD-129 marking requirements, and nonmanufactured wood packaging for EU-bound shipments must be heat-treated and certified as per YM4 L001. Contractors must also comply with cybersecurity safeguards under 252.204-7012 and 7008, avoid prohibited telecommunications equipment under 252.204-7017 and 7018, and submit certifications for material compliance, including SDS and HMA

Plastics Packaging Film and Sheet (including Laminated) Manufacturing

POSTED

DEADLINE

Technical Documentation and WAWF Submission SupportThis contract involves the compilation and submission of technical documentation and unique identifier (UID) data into the Defense Logistics Agency’s WAWF system to ensure full compliance with DFARS regulations and contractual obligations. The work requires precise adherence to federal standards for tracking and reporting weapon system components, with all deliverables needing to be accurately formatted and timely submitted to maintain contract validity and audit readiness. The effort is focused on supporting defense logistics operations through rigorous documentation controls and system integration. The opportunity is a small business set-aside under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 541611 for administrative management and general management consulting services. It is issued by DLA Maritime – Pearl Harbor under the Department of Defense and has a response deadline of August 3, 2026. The solicitation is open for subcontractors who can demonstrate expertise in technical documentation, UID marking, and WAWF system navigation, with performance expected to align with the administrative and compliance needs of defense supply chain operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics and Certified Delivery ServicesThis contract obligates the contractor to transport and complete final-mile delivery of industrial controllers to the Pearl Harbor Naval Shipyard, with strict requirements for signature confirmation upon receipt and full compliance with Transportation Performance Data standards. All deliveries must adhere to Department of Defense protocols, ensuring accountability, traceability, and secure handling of sensitive equipment throughout the supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the federal commitment to small business procurement. The solicitation is managed by DLA Maritime – Pearl Harbor under the Department of Defense and falls under NAICS code 484220, which pertains to truck transportation for freight and materials. Bidders must submit responses by August 3, 2026, with the opportunity posted on July 24, 2026. Performance is concentrated at the Pearl Harbor Naval Shipyard, and while specific location details are not provided, the delivery site is a secured military installation requiring strict adherence to access, security, and documentation procedures. The contract emphasizes verified delivery outcomes, with no tolerance for noncompliance in signature verification or TPD reporting, making precision and reliability critical to successful performance.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Proof of Delivery (TPD) and Logistics DocumentationThis contract requires the generation and submission of Transporter Proof of Delivery (TPD) documentation that includes the government recipient’s signature or name, as mandated by clause H15, ensuring verifiable delivery acknowledgment for logistics operations. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to bid, and it is governed by the NAICS code 561320 which pertains to waste collection and material recovery services, suggesting the delivery involves logistical support for government operations. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a narrow window for submissions, and the contracting activity is under DLA Maritime - Pearl Harbor, a Department of Defense organization, implying the deliverables support defense or military supply chain requirements. The place of performance and point of contact details are not specified, but the requirement for government-signed TPD underscores strict accountability and compliance standards for documentation integrity.

Temporary Help Services

POSTED

DEADLINE