Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Supply of IVC Racks and Cage Components

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of specialized equipment for a Veterans Affairs vivarium expansion, specifically including two EMERAT 1050 racks, ninety-six ER1050 cages equipped with gasket-psu components, ninety-six matching lids, and one hundred universal RFID label holders. These components are critical for maintaining controlled environmental conditions and facilitating efficient animal tracking within the vivarium system. The solicitation is structured as a subcontract under NAICS code 332999, indicating it falls under other fabricated metal product manufacturing, and is managed by the Department of Veterans Affairs through its Rpo East (36C24E) office. The opportunity was posted on August 4, 2026, with proposals required to be submitted by August 11, 2026, at 8:00 PM, suggesting a tight turnaround for qualified vendors to respond. The performance location and specific delivery details are not specified in the available data, but the equipment is intended for use in a VA facility undergoing expansion to enhance research and animal care capabilities.

General Info

Supply of EMERAT 1050 racks, ER1050 cages, lids, and RFID holders for VA vivarium expansion by August 11, 2026.

Agency

Department Of Veterans Affairs → Rpo East (36C24E)View Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → Rpo East (36C24E)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Veterans Affairs → Rpo East (36C24E)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 2 EMERAT 1050 racks, 96 ER1050 cages with gasket-psu, 96 lids, and 100 universal RFID label holders for a VA vivarium expansion.

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
Precision Machining and Fabrication of Microphone BracketThe contract calls for the precision machining and fabrication of a microphone bracket designed specifically for military communication systems, requiring adherence to Critical Application Item standards that ensure uninterrupted performance under extreme operational conditions. The component must meet stringent requirements for reliability, durability, and environmental resilience, with manufacturing processes subject to rigorous quality control to support mission-critical applications in defense environments. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the North American Industry Classification System code 332999 indicating it falls under miscellaneous fabricated metal product manufacturing. The solicitation was posted on August 4, 2026, with proposals due by September 3, 2026, and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. The place of performance and office address details are not provided, but performance is expected to align with defense logistics and supply chain expectations for the U.S. military. Bidders must demonstrate proven capability in high-precision metal fabrication, quality assurance protocols, and experience supplying components for military systems, as failure to meet specifications could compromise communication effectiveness in the field. All interested parties must submit responses through the designated DIBBS portal by the stated deadline.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7M0-26-T-029R
The contract is for the procurement of two cable assemblies under solicitation SPE7M0-26-T-029R, with a total small business set-aside and a NAICS code of 332999. The delivery requirement is strictly five days after delivery order, and the solicitation closed on August 17, 2026, issued on August 4, 2026. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on the acquisition size. The item involves covered defense information and is subject to export control under ITAR or EAR, meaning any disclosure to foreign persons, including within the U.S., requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs this data, and only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export training, and DLA approval may access the technical data. The place of performance is Tobyhanna, Pennsylvania, and the point of contact is Gerard Quinn of the Department of Defense’s Maritime Supply Chain ESOC Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-615C
The contract pertains to the procurement of a SPACER, PLATE with part number 165-7067132-58 and NSN 5365-01-593-7528, for a quantity of 85 units, under solicitation SPE4A7-26-T-615C. Delivery is required within 171 days after award, with inspection and acceptance occurring at the supplier's origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with verification levels designated as VII, IV, and II for critical, major, and minor attributes respectively, and AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose between attribute or variable inspection under MIL-STD-1916. The item must not contain mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof design and secondary containment as per NAVSEA 5100-003D. Physical identification of the bare item must be marked per RQ017, and non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, whether in the U.S. or abroad, including foreign subsidiaries and employees; DFARS 252.225-7048 applies. Access to export-controlled data is restricted to contractors with approved US/Canada JCP certification, completed DOD export control training, and DLA approval. The solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026, and the point of contact is Jessica Gentry of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SWAGING SLEEVE, WIRE RO
Solicitation # SPE4A5-26-T-323R
The contract specifies the procurement of 164 swaging sleeves for wire rope, identified by NSN 4030-01-417-5140 and part number MS51844-81, manufactured in accordance with specification NR MS51844E. This item is classified as a commercial item and subject to stringent quality and packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The product is designated as a critical application item requiring physical identification and adherence to tailored higher-level contract quality requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and critical attributes are verified at Level VII with an AQL of 0.1. Delivery is FOB origin with a required delivery window of 171 days, with no variance allowed in quantity. The delivery destination is DLA Distribution Cherry Point in North Carolina, and the item must be ready for shipment by January 31, 2027, to meet the original required delivery date of March 29, 2027. The contract is governed by DLA packaging and quality requirements, incorporating technical specifications from the DLA Master List, with acceptance performed at the destination point. The solicitation was issued under SPE4A5-26-T-323R with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612X
This contract involves the procurement of 384 units of a shim identified by NSN 5365-01-570-5245 under solicitation SPE4A7-26-T-612X, with a delivery requirement of 171 days after award. The solicitation is issued by the Defense Logistics Agency through its ASC Supplier Oper AE and AF Division, and responses are due by August 12, 2026. The item is subject to stringent cybersecurity requirements, mandating CMMC Level 2 certification for the offering organization as a certified third-party assessment organization. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation issuance. The contract incorporates export control provisions under ITAR or EAR, restricting the disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. Additional requirements include adherence to DLA packaging standards, inspection and acceptance at origin, removal of government markings from non-accepted items, physical identification of bare parts, and compliance with DFARS 252.225-7048 for export-controlled information. The place of performance is specified as Tracy, California, with Jamiah Sutton as the primary point of contact for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
PANEL, VEHICULAR OPE
Solicitation # SPE7L1-26-T-912E
The contract pertains to the procurement of one unit of a vehicular panel identified by NSN 2510016627142 and part number 4310155, issued under solicitation SPE7L1-26-T-912E by the Department of Defense through the Land Supply Chain organization. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, with precedence given to applicable DLA Master List of Technical and Quality Requirements, including mandatory labeling per MIL-STD-129. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, ensuring the Unit of Issue is one each and Quantity per Unit Pack is correctly specified. The item is to be shipped to the Distribution Management Office at MCLB Albany, Georgia, via the fastest traceable means, explicitly excluding parcel post. The shipment reference includes RDD 999, project code 657 TP 1, and a government-only tracking identifier. The required delivery date is August 3, 2026, and the contract’s technical specifications, including those identified by R or I numbers, are incorporated by reference from the DLA Master List accessible via the official DLA website. The contracting officer, Kristina Derry, can be contacted for inquiries, and all compliance obligations, including unit of issue alignment with ANSI X12 standards, must be met to ensure acceptance and payment.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, SADDLE
Solicitation # SPE4A5-26-T-320X
The contract specifies the procurement of 13,566 units of a wire rope saddle clamp identified by part number MS16842-7 and NSN 4030-00-243-4440, manufactured in accordance with MIL-SPEC MS16842H and referenced standards including FF-C-450G. The item must be produced using a forging process, with tooling requirements tied to sourcing through DLA’s Aviation or Land & Maritime Supply Chains. All components are strictly prohibited from containing mercury or mercury-containing compounds, except for specific exemptions such as batteries, fluorescent lights, instruments, or sensors as defined by NAVSEA, with additional containment and safety requirements for permitted mercury-containing devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and preservation methods must exclude any mercury-based substances. The delivery is FOB origin, with inspection and acceptance occurring at the point of origin, and the quantity variance is fixed at zero percent. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract is a total small business set-aside under NAICS code 332999, with a required delivery date of March 20, 2027, and a need ship date of January 31, 2027. All requirements in the DLA Master List of Technical and Quality Requirements referenced by R-numbers are incorporated, and the solicitation was issued on August 4, 2026, with responses due by August 12, 2026. Delivery is to DLA Distribution Red River, Texarkana, TX, under contract SPE4A5-26-T-320X.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300C
The contract pertains to a nonmetallic hose assembly with part number 74D461053-1005 and NSN 4720-01-279-8980, issued under solicitation SPE7M4-26-T-300C as a total small business set-aside. A single unit is required to be delivered within 20 days of award, with delivery terms FOB origin and inspection and acceptance also occurring at the manufacturer’s facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting specification provisions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging requirements, while unit level identification is not required per customer request. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are classified with verification levels or AQLs as defined in the contract. The item must be shipped by the fastest traceable means, excluding parcel post, to the specified delivery address in Belle Chasse, Louisiana. The contract specifies a required delivery date of July 31, 2026, and references detailed logistics, billing, and agency data for government use only, with Blake Tushar designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
RING, LOCK, SERRATED
Solicitation # SPE4A7-26-T-614Y
The contract specifies the procurement of three serrated lock rings with NSN 5365-01-592-3046 under solicitation SPE4A7-26-T-614Y, with a delivery deadline 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of intentional mercury or mercury-containing compounds except for specific exempted uses such as functional batteries, fluorescent lights, sensors, weapon systems, and approved chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment layer in accordance with NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The item is subject to export controls under ITAR or EAR, requiring prior government authorization for any export or disclosure to foreign persons, and access is restricted to contractors with JCP certification, completed training, and DLA approval. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Technical data is protected under DFARS 252.225-7048, and physical marking of items must meet DLA identification standards. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, under oversight from the Department of Defense’s ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-299Q
This contract specifies the procurement of one metal hose assembly with NSN 4720-01-286-0229 and part number 4501SP-34735 from HYSPAN PRECISION PRODUCTS, INC., under solicitation SPE7M4-26-T-299Q. Delivery is required within 20 days to a destination address at FPO AE 09577, with the shipment to be delivered FOB destination and inspected and accepted at the same location. The quantity is fixed at one unit with zero variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods including vacuum sealing, protective wrapping, and Unit Container E8, while palletization follows DLA packaging requirements. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for approved exceptions such as batteries, fluorescent lamps, sensors, or instruments as defined by NAVSEA, with portable devices requiring shockproof construction and a second containment barrier per NAVSEA 5100-003D. The contract prohibits parcel post shipping and mandates the use of the fastest traceable means, with freight directed to the USNS LARAMIE. Special marking is not required, and all documentation references DLA’s Master List of Technical and Quality Requirements for applicable R and I numbers. The original required delivery date is July 31, 2026, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The contracting office is the Fluid Handling Division of the Department of Defense, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Veterans Affairs → Rpo East (36C24E)

Same awarding agency

NAICS: 335313
New
Federal
Supply of Power and Rack HardwareThe contract involves the supply of one IEC 3.0 power cable equipped with a US/JP plug and v-lock, alongside 96 Top ER1050 units integrated with bottle-PSU power supplies, all intended for deployment within EMERAT IVC racks. These components are critical for ensuring reliable power delivery and seamless hardware integration in specialized infrastructure environments. The solicitation is classified as a subcontract under NAICS code 335313, indicating it pertains to the manufacturing of electrical equipment and components, and is managed by the Department of Veterans Affairs through its Rpo East (36C24E) office. Responses must be submitted by August 11, 2026, at 8:00 PM, with the opportunity posted on August 4, 2026. No set-aside provisions or geographic restrictions are specified, and the place of performance and point of contact details are not provided, suggesting flexibility in delivery logistics and direct coordination between the awardee and the procuring entity.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333316
New
Federal
Supply of Bedding Dispenser and Hose Connection KitsThe contract calls for the supply of one Zephyr touch bedding dispenser and two transparent hose connection kits, each measuring 0.8 meters, to be installed on ER1050 racks at a Department of Veterans Affairs medical facility. These items are intended for use in a healthcare setting where efficient bedding and fluid management systems are critical to operational workflows and patient care. The procurement is classified as a subcontract under NAICS code 333316, which corresponds to the manufacturing of medical and dental equipment. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for August 11, 2026, at 8:00 PM. The contracting office is Rpo East (36C24E) under the Department of Veterans Affairs, and while the specific location of performance is not detailed, it is understood to be at a VA medical facility. The contract does not specify any set-aside provisions, and no point of contact information is provided in the available data. Interested parties must submit responses through the SAM.gov portal before the deadline to be considered for award.
Photographic and Photocopying Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326199
New
Federal
Supply of Watering System ComponentsThe contract calls for the supply of 192 polysulfone water bottles equipped with silicone rings and 192 grey bottle caps featuring seal gasket assemblies, specifically designed for use in rodent IVC systems. These components are critical for maintaining sterile and leak-proof watering environments in laboratory animal housing, ensuring proper function and animal welfare. The materials specified—polysulfone for durability and chemical resistance and silicone for superior sealing—reflect the technical demands of biologically sensitive settings. The solicitation is classified as a subcontract under NAICS code 326199, which covers other rubber product manufacturing, and is issued by the Department of Veterans Affairs through its Rpo East (36C24E) office. The opportunity was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time. No set-aside provisions or geographic performance details are specified, and no point of contact information is provided in the contract data. Interested parties must submit proposals through the SAM.gov portal using the provided UI link before the deadline.
All Other Plastics Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
Federal
AA15-- ***INTENT TO SOLE SOURCE**** Individually Ventilated Cage System-SLC
Solicitation # 36C24E26Q0087
The Department of Veterans Affairs, George E. Whalen VA Health Care System in Salt Lake City, intends to award a sole source procurement to Allentown LLC for a comprehensive set of individually ventilated cage (IVC) system components including 96 ER1050 cages with gasket-psu, 96 lids, 192 polysulfone water bottles with silicone rings, 192 grey bottle caps with seal gaskets, and配套 hardware such as power supply cables, rack assemblies, label holders, and transparent hose connection kits. These components are essential to expand and maintain the existing infrastructure of 21 Allentown IVC racks and approximately 2,600 cage assemblies, which are exclusively compatible with Allentown’s proprietary system features including stacking lugs, AirKup configuration, U channel exhaust collars, Edstrom EZLock watering systems, rear KUP seal dimensions, and integration with Ecoflo blower units. No alternative vendor can replicate this level of system compatibility, making Allentown the sole qualified supplier. This procurement is classified under NAICS code 332999 with a business size standard of 750 employees and is not open to competitive bidding under FAR 13.106-1(b)/8.405-6(a)(2). Interested parties may submit documentation demonstrating their ability to meet the specified requirements before 4:00 PM Eastern Standard Time on Tuesday, August 11, 2026, to latonya.hughes2@va.gov. Submissions must include technical specifications, product cut sheets, capability statements, or other evidence proving equivalence or compatibility with Allentown’s proprietary components. The government retains full discretion to determine whether competition is warranted based on submitted responses, and no costs incurred by respondents are assumed by the government. The solicitation number is 36C24E26Q0087, with primary point of contact Latonya Hughes at the Department of Veterans Affairs.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
6515--Research Equip (LAMb) - Medium Steam Sterilizer - BOISE | EDA: 9/25/26
Solicitation # 36C24E26Q0086
The Department of Veterans Affairs, Boise VA Medical Center, plans to procure a Steris Autoclave Unit with AMSCO 600LS Medium Steam Sterilizer on a sole source basis under FAR 6.302-1 due to its unique integrated steam generator, which is not available in competing models. This feature ensures a reliable and independent steam supply, critical for consistent sterilization cycles and minimizing operational downtime unrelated to building infrastructure limitations. The unit’s chamber dimensions are specifically suited to accommodate up to four caging systems simultaneously, significantly enhancing workflow efficiency compared to other available alternatives, and its compatibility with existing caging setups makes it the only viable option for current operations. This notice of intent is not an invitation for competitive bids, but responsible sources may submit capability statements by August 7th, 7 AM EST to Stacy Taylor at Stacy.Taylor@va.gov, with no telephone inquiries accepted. The government retains full discretion to proceed without competition based on responses received. The solicitation number is 36C24E26Q0086, with a NAICS code of 334516, and the procurement is managed by the RPO East office under the Department of Veterans Affairs, with the point of contact listed as Lynn M Portman.
Analytical Laboratory Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
Federal
On-Site Maintenance and Warranty SupportA one-year post-installation warranty service is provided for two washer systems located in a secure medical research environment, ensuring uninterrupted operation through guaranteed 48-hour on-site response for all repairs, troubleshooting, and parts replacement. This service is designed to maintain critical functionality in a high-stakes setting where system reliability is essential, and any downtime could impact research integrity or compliance. The warranty covers both hardware and labor, with technicians required to arrive on-site within two business days of a service request, regardless of the nature or urgency of the issue. The contract falls under NAICS code 811310, classifying it as miscellaneous repair and maintenance, and is issued as a subcontract by the Department of Veterans Affairs under the Rpo East (36C24E) agency. The place of performance is specified as Cincinnati, Ohio, with a zip code of 45220, and the solicitation was posted on July 23, 2026, with a response deadline of August 5, 2026. Although no set-aside designation or point of contact is listed, the terms emphasize strict adherence to response timelines and service quality, reflecting the sensitive nature of the environment in which the equipment operates.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 238220
Federal
Installation and Integration Services for Lab WashersThe contract entails the full mechanical installation, utility connection, and commissioning of sterilizers and glassware washers within an existing facility, utilizing currently available utilities without requiring new infrastructure. The work must be performed in alignment with BSL-II biosafety standards, requiring strict adherence to containment and operational protocols during installation and commissioning. Final testing and compliance validation are mandatory to ensure all equipment operates correctly and meets regulatory requirements for laboratory use. The scope is limited to integration with existing systems and does not include design, construction of new utility lines, or modifications to building infrastructure. Performance is required at a facility located in Cincinnati, Ohio, with a response deadline of August 5, 2026. Classified as a subcontract under NAICS code 238220, the contracting activity is managed by the Department of Veterans Affairs through Rpo East (36C24E), and the work is governed by the terms and conditions applicable to federal subcontracting under this solicitation.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 333314
Federal
Glassware Washer Supply and DeliveryThe contract calls for the supply and delivery of a single-door, Life Science-grade glassware washer designed to meet rigorous standards for laboratory use, with defined interior dimensions and precise temperature performance capabilities. The equipment must be fully compatible with BSL-II containment environments and engineered to operate without requiring any modifications to existing facility infrastructure, ensuring seamless integration into current laboratory setups. The washer is intended for use in high-sensitivity scientific environments where sterility, reliability, and compliance are critical. The solicitation is classified as a subcontract under NAICS code 333314, issued by the Department of Veterans Affairs through its Rpo East (36C24E) office, with performance to occur in Cincinnati, Ohio, at zip code 45220. The opportunity was posted on July 23, 2026, with a firm deadline for responses on August 5, 2026, at 4:00 PM. No set-aside provisions or additional organizational type details are specified, and the point of contact information is not provided in the data. Interested parties must submit proposals by the stated deadline to be considered for award.
Optical Instrument and Lens Manufacturing

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 333314
Federal
Cage Rack Washer Sterilizer Supply and DeliveryThe contract requires the supply and delivery of a plug-and-play cage rack washer sterilizer specifically designed for a BSL-II research facility located in Cincinnati, Ohio, with a zip code of 45220. The equipment must meet precise dimensional, thermal, and interface specifications to ensure seamless integration into existing infrastructure without requiring any structural or utility modifications to the facility. This ensures operational continuity and compliance with biosafety standards while eliminating the need for costly or time-consuming building updates. The system must be fully functional upon installation, supporting efficient and safe cleaning and sterilization of laboratory cage racks under strict regulatory protocols. Subcontractors must respond by August 5, 2026, to fulfill this requirement under the NAICS code 333314 for medical and dental equipment and supplies manufacturing. The solicitation is managed by the Department of Veterans Affairs through its Rpo East (36C24E) office, with performance localized exclusively at the Cincinnati site. The urgency and specificity of the technical requirements indicate a critical need for reliable, high-performance sterilization equipment, prioritizing compatibility, durability, and compliance with biosafety levels to maintain the integrity of ongoing research operations. There is no set-aside designation, and the contract type is explicitly identified as a subcontract.
Optical Instrument and Lens Manufacturing

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 811212
Federal
Preventive Maintenance ServicesA one-year preventive maintenance service contract is in place for the laboratory glassware washer and steam sterilizer installed at the Department of Veterans Affairs facility in Cincinnati, Ohio, with a zip code of 45220. The contract falls under the NAICS code 811212 and is classified as a subcontract, requiring timely response by August 5, 2026, with the opportunity posted on July 23, 2026. The maintenance services are intended to ensure the ongoing operational integrity and safety of the equipment, supporting critical laboratory functions within the VA system. While specific service details are not outlined, the agreement emphasizes routine inspections, calibration, component replacement, and performance verification to prevent unexpected downtime and maintain compliance with laboratory standards. The contracting activity is managed under RPO East (36C24E), with performance obligations centered at the Cincinnati location.
Computer and Office Machine Repair and Maintenance

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 238220
Federal
Equipment Installation ServicesThe contract involves the installation of a laboratory glassware washer and a steam sterilizer at the Cincinnati VA Medical Center, specifically within a BSL-II biosafety level environment. The work must be performed in compliance with all applicable safety and operational standards for contained laboratory settings, ensuring the equipment is properly integrated, calibrated, and functional for routine laboratory use. The contract is structured as a subcontract under the NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors, indicating the need for specialized technical expertise in equipment placement and utility connections. The solicitation was posted on July 23, 2026, with a firm response deadline of August 5, 2026, at 4:00 PM. Performance will take place at the Cincinnati VA Medical Center, located in zip code 45220, and the contracting entity is the Department of Veterans Affairs under the Rpo East (36C24E) office. While no set-aside type is specified, bidders are expected to demonstrate experience with medical or laboratory installations in federal healthcare facilities, especially those requiring adherence to stringent biosafety protocols. All installations must be completed with minimal disruption to ongoing laboratory operations and must meet all regulatory and facility-specific requirements.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 333295
Federal
Steam Sterilizer SupplyThe contract pertains to the procurement and delivery of a single M-23 Spindle Header steam sterilizer for use within a BioSafety Level II Veterinarian Medical Unit, ensuring compliance with stringent sterilization standards required for handling infectious materials in a veterinary healthcare setting. The equipment must meet all technical and safety specifications necessary for BSL-II operations, and the delivery is to be performed at the designated facility in Cincinnati, Ohio, with a ZIP code of 45220. This is a subcontract under the Department of Veterans Affairs, specifically managed by Rpo East (36C24E), and the North American Industry Classification System code 333295 indicates classification under other commercial and service industry machinery manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 5, 2026, at 4:00 PM Eastern Time, requiring timely submission of proposals from qualified vendors. While set-aside details are not specified, the contract is open to eligible subcontractors responding to the issuance through the SAM.gov platform.
Semiconductor Machinery Manufacturing

POSTED

13 days ago

DEADLINE

in about 15 hours
View Details