Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Lubricating Coolers (NSN 2935-01-007-8381 NZ)

Active

Federal

Response Deadline09/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of new lubricating coolers, specifically part number 4046015 (NSN 2935-01-007-8381 NZ), for prime contractors supporting DLA Army supply contracts. As these components are designated as Critical Safety Items, the provider must ensure strict adherence to quality standards, including the delivery of 13 to 20 units accompanied by comprehensive inspection and test reports. The contract requires rigorous compliance with the Counterfeit Detection and Avoidance Program and mandates full supply chain traceability and material certifications. All deliverables must include IUID marking submitted via WAWF. This procurement is managed by the Department of Defense through the DLA Aviation office in Oklahoma City under NAICS code 336413.

General Info

Supply 13-20 critical safety lubricating coolers with full traceability and quality certifications.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-26-Q-1507.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COOLER, LUBRICATING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 09:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies new-manufacture lubricating coolers for prime contractors on DLA Army supply contracts. Manufactures part number 4046015 (NSN 2935-01-007-8381 NZ) as a Critical Safety Item. Provides full supply chain traceability, material certifications, and IUID marking via WAWF. Adheres to Counterfeit Detection and Avoidance Program (CDAP) standards. Delivers 13 to 20 units with complete inspection and test reports.

Similar Contracts

Same NAICS industry code

16--NRP,BOTTLE FE - 36, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB30

This contract, identified by NSN 7R-1680-016098991-P8, is for the procurement of 27 units of a flight critical item with delivery terms set as FOB Origin. Due to the critical nature of the item and the limitations of available technical data, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, although new sources may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The government intends to negotiate with a single source under FAR 6.302-1, though it will consider proposals from other responsible sources within 45 days of publication. This is a pre-solicitation notice for supplies or services where FAR Part 12 policies for commercial items are not being utilized. Interested parties must meet all qualification requirements at the time of award, and the procurement is subject to the Buy American Act and various Free Trade Agreements.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Supply of Aerospace-Grade Raw Materials for Yoke Assembly

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Yoke Assembly, Cargo Ramp Lock

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Flexible Couplings (NSN 1660-00-560-4009)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Boot Assy, Auxiliary (NSN 1650-01-132-0794)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Bypass Indicators (Source Controlled/CSI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Assembly and Final Inspection of Bomb Ejector Rack Breeches

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Linear Actuating Cylinder Heads

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Stiffener Rib Supplier (NSN 1560-01-648-0809)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

HEAD, LINEAR ACTUATING

Solicitation # SPE4A7-26-T-697N

Solicitation SPE4A7-26-T-697N is a fixed-price request for the procurement of seven linear actuating cylinder heads, identified by NSN 1650-01-110-0251 and TransDigm Inc part number 02-1411. Issued by DLA Aviation, the requirement is categorized under NAICS 336413. The required delivery date is May 18, 2027, with a delivery period of 256 days. Shipping is FOB Origin, and the items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and inspection standards, with both inspection and acceptance occurring at the origin. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CLUTCH SHOE, SET

Solicitation # SPE8E7-26-Q-0315

Solicitation SPE8E7-26-Q-0315 is a simplified acquisition request issued by DLA Troop Support for the procurement of 70 sets of clutch shoes, identified by NSN 4140-01-548-8631. The requirement specifies that each set must contain two clutch shoes rather than one. Eligible part numbers include Hamilton Sundstrand Corporation P/N 1002525-1 and Kihomac Inc P/N 767121-9K. This is a firm fixed price contract with a delivery requirement of 60 days after order, and a need ship date of August 10, 2027. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951, MIL-STD-129, and RP001 for palletization, with DLA technical requirements taking precedence over ASTM standards. Inspection and acceptance will occur at the destination, with supplies delivered to DLA Distribution Depot Hill at Hill AFB, Utah. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, Buy American preferences, and the prohibition of certain foreign telecommunications equipment. Quotations must be submitted via the DIBBS portal by September 20, 2026.

POSTED

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE4A7-26-T-429Q

Solicitation SPE4A7-26-T-429Q is a fixed-price request for quotations issued by DLA Aviation for the procurement of 14 fluid filter elements, identified by NSN 1650-01-311-5101 and PTI Technologies Inc. part number 7587115. This item is designated as a critical application item. The procurement falls under NAICS code 336413 and requires delivery by September 29, 2027, with terms set as FOB Origin under the First Destination Transportation program. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements and configuration change management. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Packaging must adhere to DLA procurement requirements (RP001) and marking must comply with MIL-STD-129. The solicitation includes various federal and defense clauses, such as the Buy American Act, CMMC Level 2 Self-Assessment, and the use of the Wide Area Workflow system for electronic invoicing. Offers involving additive manufacturing are ineligible for award, and a price evaluation preference is applied to HUBZone concerns.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Supply of Engine Temperature Control Electronic Amplifiers

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

NADCAP Certified Specialized Processing

POSTED

DEADLINE

Fuel Pressure Valve Production (NSN: 2915008960173ok)

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Specialized Packaging & Preservation

Motor Vehicle Towing

POSTED

DEADLINE

Non-Destructive Testing (NDT) & Inspection

Testing Laboratories and Services

POSTED

DEADLINE

Hydraulic Seal & Gasket Supply

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Specialized Surface Treatment & Finishing

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Component Machining (CNC/Milling/Turning)

POSTED

DEADLINE

Defense-Grade Packaging and Transportation Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Critical Safety Item (CSI) Component Fabrication

POSTED

DEADLINE

in about 1 month

Supply of Aerospace Materials for Ring Mount Production

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Manufacture of Aircraft Rear Ring Mount (P/N: 9530M56G18)

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS