This Government Contract opportunity from Government of Canada was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of MI 9210A One Ohm Standard

Closed

Canada

Submission Closed05/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Canada

PPLN Waveguide Mixer Design and FabricationThe contract requires the design, fabrication, and testing of a custom 2×1 periodically poled lithium niobate waveguide mixer intended for use as an optical parametric amplifier in quantum photonic systems. The device must operate with a 780 nm pump wavelength and a 1560 nm signal wavelength, delivering a minimum output power of 4 milliwatts and achieving at least 3.5 decibels of squeezed light performance, critical for quantum noise reduction applications. The waveguide structure must be precisely engineered to enable efficient nonlinear interactions and maintain stability under operational conditions, with all phases of development—from simulation and prototyping to rigorous optical testing—expected to meet exacting technical specifications. The work is issued as a subcontract under the National Research Council of Canada, part of the Government of Canada, and is focused on the National Capital Region for performance. The solicitation was posted on June 26, 2026, with responses due by July 12, 2026, and falls under NAICS code 334516, indicating classification within the manufacturing of optical instruments and lenses. While no set-aside provisions or point of contact details are specified, the urgency and precision required suggest a highly specialized technical effort, likely targeting vendors with prior experience in nonlinear optical materials, chip-scale photonics, and quantum light source development. All deliverables must be fully documented and validated to ensure readiness for integration into advanced quantum photonic platforms.

National Research Council of Canada

POSTED

DEADLINE

FY26 Lab Consolidation for Coagulation CPRR EffortThis procurement is a combined synopsis and solicitation issued as a Request for Quotation under FAR Part 12 for a Cost-Per-Reportable Result (CPRR) contract to supply coagulation analyzers, reagents, consumables, and associated services to support military treatment facilities across the Department of Defense. The requirement is for a firm-fixed-price contract with a 12-month base period and four optional 12-month extension periods, totaling up to 66 months if all options are exercised, with an anticipated start date of October 1, 2026. The contract requires the delivery of new, FDA-approved, automated coagulation analyzers capable of bidirectional interfacing with military electronic health records and laboratory systems, featuring random access and continuous testing capability, along with surge capacity to handle up to a 50% increase in volume across all sites. All equipment must meet stringent quality and operational standards, including a 95% effectiveness rate over 30 consecutive days for acceptance, and must comply with CLSI, CAP, FDA, and NIST standards. The contractor is responsible for installation, training, maintenance, calibration, preventive maintenance, safety testing, corrective repairs, lot-to-lot support, and full lifecycle service, with all costs—including ancillary equipment, middleware, UPS units, travel, and consumables—included in the CPRR pricing structure. Each site has a unique contract line item number with monthly billing based on a budgeted maximum, and a separate pricing list for reagents and controls is required. The solicitation mandates strict compliance with cybersecurity protocols under the DoD Risk Management Framework, requiring Nessus and SCAP scans, configuration validation against DHA-approved standards, and remediation of any deviations prior to final acceptance. All personnel must adhere to MTF security procedures, and site-specific constraints such as space, power, ventilation, plumbing, and waste disposal must be assessed and addressed by the contractor, who must submit a Site Preparation Report at their own expense. Submission requirements include completing Attachment 2 (Technical Submission Form) and Attachment 3 (Quote Sheet), with all quotes submitted via SAM.gov and acknowledging receipt of all amendments. Offers must be signed, dated, and include the offeror’s Unique Entity Identifier and CAGE code, with registration in SAM.gov mandatory. Technical and Information Assurance submissions are pass/fail gates; failure in either results in immediate disqualification. The evaluation will be based on best value, weighing technical capability, past performance, cybersecurity posture, and price

Defense Health Agency Hcd West

POSTED

DEADLINE

Purchase of FTIR and UV-Vis/NIR microscopes for The ICEE facilityNASA/NSSC is proceeding with a sole-source procurement under FAR 12.102(a) to acquire an integrated FTIR microscope and UV-Vis/NIR microspectrophotometer system from Jasco Incorporated for use at the ICEE facility at NASA Ames Research Center. The procurement is justified on the basis that Jasco is the sole provider capable of delivering a system that seamlessly integrates with the existing Jasco NRS5500 Raman microscope through its proprietary iQ frame technology, enabling precise sample repositioning and correlated molecular analysis across mid-IR, visible, and Raman spectral ranges for planetary science applications. The integrated system must include an MCT detector with a spectral range of 7800–350 cm⁻¹, a UV/Vis-NIR microspectrophotometer with a 200 nm to 1.6 µm range and dual-beam monochromator, automated XYZ stages with 1 µm precision, diamond ATR objectives, IQ mapping and monitoring software, a Dell Pro Slim desktop with Windows 11, two 24-inch monitors, calibration standards, and factory-installed training—all to be delivered and commissioned at NASA Ames by November 1, 2026. The estimated contract value is $286,581.75, with no competitive solicitation planned, as responses to the notice will be evaluated solely to confirm the validity of the sole-source justification. The procurement follows commercial item acquisition procedures under FAR Part 12, with the NAICS code 334516, and includes the NASA FAR Supplement clause 1852.215-84 for the Ombudsman. All submissions regarding capabilities must be sent in writing to Kacey Hickman at Kacey.l.hickman@nasa.gov no later than 3:00 p.m. Central Standard Time on June 30, 2026, and oral communications are explicitly prohibited. While no formal evaluation factors, pricing breakdowns, or packaging requirements are specified, acceptance will be based on strict compliance with the technical specifications outlined in the Statement of Work, with final acceptance occurring at NASA Ames following installation and operational validation.

NASA Shared Services Center

POSTED

DEADLINE

Pressure TesterThe contract seeks to procure Pneumatic and Hydraulic Pressure Test Systems Equipment specifically for the PTC - Electronics Laboratory managed by the Defense Logistics Agency Land and Maritime - Veterans Technology Acquisition (DLA L&M-VTA). The solicitation, titled "Pressure Tester," is issued by the Department of Defense through the DCSO-COLUMBUS-DIVISION-2 office located in Columbus, Ohio. The requirement is classified under the NAICS code 334516, which relates to manufacturing electronic components. Interested parties are invited to respond to this sources-sought notice by the deadline on June 11, 2026. No set-aside provisions apply to this procurement, and potential contractors should refer to the attached Statement of Work for detailed technical specifications. The primary points of contact are Shaun Bunnell and Jacob Combs, both accessible via email and phone for further inquiries. The equipment will be delivered and used at the Columbus, Ohio facility. Additional relevant details and the full solicitation can be viewed through the official contracting workspace online.

DCSO-COLUMBUS-DIVISION-2

POSTED

DEADLINE

6515--Intent to Sole Source: Portable Reverse Osmosis Water Purification System for the James J. Peters VAMC.

242-NETWORK Contract Office 02 (36C242)

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract involves the supply of a Measurements International Primary One Ohm Standard (model 9210A/1) to the Department of National Defence, Government of Canada. The product must be delivered with an ISO 17025-compliant calibration certificate issued within 90 days of delivery, ensuring the device meets stringent technical standards including a stability specification of 0.2 parts per million (ppm). This procurement falls under NAICS code 334516 and is categorized as a subcontract, with the place of performance located in Canada. The solicitation was posted on May 12, 2026, with responses due by May 27, 2026. While specific set-aside details or organization types are not indicated, the contract is managed under the Government of Canada's purchasing framework. The priority on precision and certification reflects the critical nature of measurement standards required by the Department of National Defence for their operational and calibration needs.

General Info

Supply of ISO 17025-calibrated 1 Ohm Standard to Canadian Defence, delivery by May 27, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334516 - Analytical Laboratory Instrument Manufacturing View NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 12

subcontract

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of a Measurements International Primary One Ohm Standard (P/N: 9210A/1) with ISO 17025-compliant calibration certificate issued within 90 days of delivery, meeting 0.2 ppm stability and technical specifications.

Summit Ridge Defense Group IncUEI: M1P3R5T7V9X2CAGE: 5A3C7$31,089,772View Profile

Summit Ridge Defense Group IncUEI: M1P3R5T7V9X2CAGE: 7P1R4$891,234View Profile

Summit Ridge Defense Group IncUEI: F9H2D7S5V3A1CAGE: 2W6Y9$7,213,456View Profile

Crossbridge Federal Solutions CorpUEI: G4C8E6Y2U0I7CAGE: 2W6Y9$31,089,772View Profile

Crossbridge Federal Solutions CorpUEI: G4C8E6Y2U0I7CAGE: 5A3C7$14,562,088View Profile