Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply of Mortise Latches (NSN 5340007940721)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
DIBBS
Friction Lining Component Supplier (NSN 3040-12-396-5570)This subcontract involves the supply of seven friction lining units for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 3040-12-396-5570 and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict adherence to logistical and security standards is required, including packaging per ASTM D3951 and marking per MIL-STD-129. Additionally, the contractor must maintain compliance with NIST SP 800-171 security protocols. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of PIN-RIVET (NSN 5320011753786)This subcontract involves the manufacture or procurement of 863 specialized PIN-RIVET units, identified by NSN 5320011753786, to support prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. All hardware must be produced in strict accordance with RA001 technical and quality requirements, with shipment and storage marking performed according to MIL-STD-129 standards. The contract falls under NAICS code 332510 and specifies Jacksonville, Florida, as the place of performance. Interested parties must adhere to the timeline established by the Department of Defense, with a response deadline set for November 6, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Annular Ball Bearings (NSN 3110-00-155-6302)This subcontract involves the supply of 52 precision-engineered annular ball bearings, identified by NSN 3110-00-155-6302, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The bearings must be manufactured or sourced in strict accordance with TDP Rev B Gen 2 and MIL-DTL-197M standards. To ensure quality and compliance, the contract explicitly prohibits the use of additive manufacturing, requiring traditional manufacturing processes instead. The selected provider must possess a valid CAGE code and UEI to be eligible. All units must adhere to the special packaging requirements outlined in Section 4 of the military specifications. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 6, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Supply of Mounting Brackets (NSN 5340015311486)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supplier of Precision Shims (NSN 5365-01-040-5274)This subcontract involves the supply of 1,054 precision shims, identified by NSN 5365-01-040-5274, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires these parts to be manufactured or sourced in strict accordance with all associated technical specifications. Notably, the use of additive manufacturing for the production of these items is strictly prohibited. The contract specifies that delivery of the units will be handled FOB Origin, with the place of performance located in Phoenix, Arizona. Interested parties should note the response deadline of November 6, 2026, and the classification of the work under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Retaining Ring Supply (NSN 5325002813608)This subcontract involves the manufacture or procurement of 222 retaining rings, part number 6763940, for the DLA Weapons Support Nuclear Reactor Program. The supplier must ensure all units meet the technical requirements specified in the DLA Master List and comply with the Buy American and Balance of Payments Program standards. Additionally, the contract strictly prohibits the use of mercury in preservation, adhering to IP056 and NAVSEA 5100-003D guidelines. Packaging and marking must be executed in accordance with MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 332510 and is managed by the Department of Defense. Performance for this contract is centered in New Cumberland, Pennsylvania.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Rod Assembly, Adjust (NSN 5410014459008)
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Helical Compression Spring Retainers
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Mounting Brackets (NSN 5340016659638)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Blind Rivets (NSN 5320016853326)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
NAICS: 332510
New
DIBBS
Turnbuckle Hardware Supplier (NSN 5340001878179)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 332510
New
DIBBS
Supply of Self-Locking Hexagonal Nuts (NSN 5310-01-426-8883)This subcontract, issued by the DLA Weapons Support ASC Commodities Division, involves the manufacture and supply of self-locking hexagonal nuts under NSN 5310-01-426-8883. The selected provider must ensure all products undergo verification testing per RQ048 and maintain comprehensive supply chain traceability. All items must be packed and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with sampling conducted per MIL-STD-1916. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510. Successful delivery of the verified and packaged components is required at the DLA Distribution DDSP facility in New Cumberland. Interested parties must provide a valid CAGE code to be eligible for this requirement.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

This subcontract involves the supply of 123 mortise latches meeting NSN 5340007940721 specifications for prime contractors supporting DLA Land and Maritime supply contracts. The provider is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance standards per RA001, packaging requirements per MIL-STD-2073-1E and RP001, and marking guidelines per MIL-STD-129. The delivery is set as FOB Origin and requires the use of specific cushioning and dunnage materials to maintain compliance. This procurement falls under NAICS code 332510 and is managed by the Department of Defense Land Supply Chain agency.

General Info

Supply 123 mortise latches meeting NSN 5340007940721 specifications for DLA Land and Maritime.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

332510 - Hardware Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-U-0779.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

53--LATCH,MORTISE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies mortise latches for prime contractors delivering DLA Land and Maritime supply contracts. Manufactures or sources latches meeting NSN 5340007940721 specifications. Performs quality assurance per RA001, packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Utilizes cushioning and dunnage materials for compliance. Delivers 123 units of packaged and marked mortise latches FOB Origin.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and International Shipping to JapanThis subcontract through the Department of Defense Land Supply Chain involves providing specialized military-grade packaging and international freight services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging items according to MIL-DTL-117, Type II, Class C, Style 1 standards using opaque, waterproof, and greaseproof bags, with all markings and Do Not Bend codes applied in accordance with MIL-STD-129. The contractor is responsible for coordinating the international shipping of these materials to Yokosuka, Japan, with delivery terms set as FOB Destination. This requirement falls under NAICS code 488510 and is associated with a performance location in FPO 96349.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 326220
New
DIBBS
Supply of Pentair Pump Group O-Rings (NSN 5331012906094)This subcontract through the Department of Defense Land Supply Chain requires the procurement of 10 O-rings specifically matching Pentair Pump Group part number 00150-023-1 and NSN 5331012906094. The items are intended for prime contractors fulfilling DLA supply contracts and must be sourced or manufactured to strict specifications. Compliance requirements mandate that the materials be free of asbestos and Class I ozone-depleting chemicals, and the components must not be produced using additive manufacturing. Additionally, the supplier must provide full supply chain traceability in accordance with DLA Directive Procurement Note C03. The performance location for this delivery is FPO 96349.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-229V
Solicitation SPE7L1-26-T-229V is a fixed-price, small business set-aside procurement for 10 O-rings (NSN 5331012906094), referencing Pentair Pump Group part number 00150-023-1. The requirement is managed by the Department of Defense Land Supply Chain, with a required delivery date of March 19, 2026, to a freight shipping address in Yokosuka, Japan. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The contract mandates strict material and quality standards, prohibiting the use of asbestos and Class I ozone-depleting chemicals. Items must be free of additive manufacturing processes unless specifically authorized. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays, with marking adhering to MIL-STD-129 and a special do not bend code. Contractors are required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333415
New
DIBBS
COOLER, LUBRICATING
Solicitation # SPE7L1-26-T-11D2
Solicitation SPE7L1-26-T-11D2 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one lubricating cooler, identified by NSN 2930-01-439-0535. The item is designated as a critical application item and is intended for delivery to the USS HOWARD DDG 83. The required delivery date is August 27, 2026, with a delivery window of five days after the order is placed. Shipping is established as FOB Destination, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. Specific environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except where functionally required. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The procurement is categorized under NAICS code 333415 and incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and prohibitions on certain telecommunications equipment.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Preservation ProviderThis subcontract opportunity is for a MIL-SPEC Packaging and Preservation Provider to support prime contractors on DLA Land and Maritime projects. The selected provider will be responsible for the specialized packaging and labeling of critical rubber components, specifically O-rings, to ensure they are ready for shipment to DLA Distribution. To prevent UV deterioration, the provider must utilize medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117. All marking and packaging operations must be executed according to MIL-STD-2073-1E and MIL-STD-129 standards. The work will be performed in New Cumberland, Pennsylvania, under the agency oversight of the Department of Defense Land Supply Chain. Interested parties should note the response deadline of October 30, 2026.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 326111
New
DIBBS
Critical Application O-Ring SupplierThis subcontract involves the supply of 13 critical application O-rings for prime contractors supporting DLA Land and Maritime projects. The required components must match NSN 5331012670108, Parker-Hannifin P/N P-84444-13, or Curtiss-Wright P/N PD41047 Item 13. All materials must be asbestos-free and mercury-free in strict compliance with FED-STD-313. The selected supplier is required to maintain NIST SP 800-171 cybersecurity compliance. Delivery of the items is designated as FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 326111 and is managed by the Department of Defense Land Supply Chain.
Plastics Bag and Pouch Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 326199
New
DIBBS
Supply of Dial Windows (NSN 5355000580337)This subcontract involves the manufacture and supply of 98 dial window components identified by NSN 5355000580337 for prime contractors supporting Department of Defense DLA supply contracts. The selected provider must utilize precision cutting, molding, or additive manufacturing in accordance with L31 standards to ensure all hardware meets strict military technical specifications. Managed by the Land Supply Chain agency, the project is categorized under NAICS code 326199. Performance of the contract will take place in San Diego, California, with a response deadline set for October 30, 2026.
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-101U
Solicitation SPE7L1-26-T-101U is issued by the DLA Land and Maritime Land Supply Chain for the procurement of 13 O-rings, identified as critical application items under NSN 5331012670108. Approved sources include Parker-Hannifin Corp (P/N P-84444-13) and Curtiss-Wright Flow Control Corporation (P/N PD41047 Item 13). The contract requires delivery within 194 days after order, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The items must adhere to strict material restrictions, specifically prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, requiring the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold. The solicitation incorporates various FAR and DFARS clauses regarding equal opportunity, waste reduction, and cybersecurity standards, including NIST SP 800-171. Offerors must submit quotations by February 27, 2026, and provide a complete data package if proposing alternate parts.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-18Q4
Solicitation SPE7L1-26-T-18Q4 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for the procurement of 11 O-rings. The required items are identified by NSN 5331-21-914-3719 and correspond to Reelcraft Industries Inc part numbers 314300-3 or 3600-29-13-15 Item 9. These components are designated as Type I Code Y items with a non-extendable shelf life of 180 months. The need ship date is March 1, 2027, with a required delivery date of March 5, 2027, delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict packaging and marking standards to prevent deterioration from ultraviolet rays. Items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with general packaging following MIL-STD-2073-1E and marking adhering to MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of trafficking in persons.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAR
Solicitation # SPE7L1-26-T-12H8
Solicitation SPE7L1-26-T-12H8 is a request for quotations from the DLA Land and Maritime Land Supply Chain for the procurement of 2,000 vehicular body panels, identified as NSN 2510016734265 and part number 153097-176-1 by Hydraulics International, Inc. This item is designated as a critical application item. The delivery requirement is set for 5 days after order, with an original required delivery date of September 9, 2026. Shipping is FOB Origin, with the destination for inspection and acceptance located in Jacksonville, Florida. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity. Offerors must submit quotes via the DIBBS portal and maintain active registration in the System for Award Management.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, HYDR
Solicitation # SPE7L1-26-T-986F
Solicitation SPE7L1-26-T-986F is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of one hydraulic manifold assembly, identified by NSN 2590016802969 and Twin Disc Incorporated part number PX92992A. This commercial item is to be delivered FOB Origin to Virginia Beach, Virginia, with a required delivery date of August 13, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment for domestic material restrictions. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS) under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 327999
New
DIBBS
WINDOW, DIAL
Solicitation # SPE7L1-26-T-700L
Solicitation SPE7L1-26-T-700L is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 98 units of Window, Dial, identified by NSN 5355-00-058-0337. The items must be manufactured according to Basic Drawing NR 94580 967593, Revision B, dated April 4, 1967. Delivery is required by January 23, 2027, with a need ship date of November 28, 2026, shipping FOB Origin to DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001), ASTM D3951, and marking standards MIL-STD-129 and MIL-STD-130N. Due to the nature of the technical data, the procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and offers a price evaluation preference for certified HUBZone small business concerns.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Closed
DIBBS
Supply of Flat Washers (NSN 5310-00-463-1388)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supply of Protective Dust and Moisture Seal Plugs (NSN 5340-01-396-8148)
LAND SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

24 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supplier of Blind Rivets (NSN 5320016852848)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Annular Ball Bearing Supplier
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supply of Blind Rivets (NSN 5320015217199)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Manufacture and Supply of Blind Rivets (NAS9309M-5-03)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

22 days ago
View Details
NAICS: 332510
Closed
DIBBS
Self-Plain Bearing Supplier
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supply of Loop Clamps (NSN 5340017385739)
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supply of Close Tolerance Screws (NSN 5305000792588)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Manufacturing of Resilient Utility Mounts
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 month ago

CLOSED

22 days ago
View Details
NAICS: 332510
Closed
DIBBS
Supply of Straight Headed Pins (NSN 5315-00-871-7197)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 332510
Closed
DIBBS
Tapered Roller Bearing Supplier (NSN 3110001981782)
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

29 days ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS