Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Non-Metallic Hose Assemblies (NSN 4720013719444)

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Fluid Handling Division involves the supply of 12 non-metallic hose assemblies. The required parts must be sourced from NAV AIDS LTD 38002, part number F16-3948, and must strictly adhere to NSN 4720013719444 specifications. Performance of the contract will take place in Tracy, California. The supplier is required to comply with DLA Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure that government identification is removed from any non-accepted supplies in accordance with RQ011. The response deadline for this opportunity is October 5, 2026.

General Info

Supply 12 non-metallic hose assemblies for DoD in Tracy, California by October 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332998 - Enameled Iron and Metal Sanitary Ware Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-439U.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONMETAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies non-metallic hose assemblies for prime contractors on DLA supply contracts. Sources part NAV AIDS LTD 38002 P/N F16-3948 meeting NSN 4720013719444 specifications. Adheres to DLA Packaging Requirements (RP001) and the DLA Master List of Technical and Quality Requirements (RA001). Removes government identification from non-accepted supplies per RQ011. Delivers 12 units of non-metallic hose assemblies.

Similar Contracts

Same NAICS industry code

Nonmetallic Hose Assembly Supplier (NSN 4720011699673)This subcontract involves the supply of nonmetallic hose assemblies for prime contractors under Defense Logistics Agency supply contracts. The provider is responsible for manufacturing or sourcing 5/16 inch ID hose assemblies that match NSN 4720011699673, ensuring full compliance with ASTM D3951 and DLA Master List requirements. The contract requires the delivery of 12 units, which must be packaged and marked according to MIL-STD-129 and palletized per RP001, while adhering to DFARS 252.204-7016 standards. Managed by the Fluid Handling Division of the Department of Defense, the performance of this contract is based in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 332998, with a response deadline set for October 5, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-459-1046)This subcontract involves the supply of 15 nonmetallic hose assemblies, specifically NSN 4720-01-459-1046, for prime contractors supporting DLA Land and Maritime fluid handling projects. These components are designated as Critical Application Items and must be manufactured or sourced in strict accordance with the Buy American Act and the Berry Amendment. The contractor is responsible for packaging the items per ASTM D3951, marking them according to MIL-STD-129, and palletizing them per RP001. The project is managed by the Department of Defense Fluid Handling Division, with performance taking place in Tracy, California. Responses for this requirement are due by October 5, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-353-8482)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of four nonmetallic hose assemblies meeting NSN 4720-01-353-8482 specifications. The contractor is responsible for sourcing or producing these units for prime contractors on DLA supply contracts, with performance taking place in Bremerton, Washington. Strict adherence to military standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the contractor must ensure mercury-free preservation in accordance with IP056. The opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026, under NAICS code 332998.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Plumbing Materials SupplyThis subcontract agreement involves the supply and delivery of plumbing materials and components for prime contractors working on St. Thomas Health Services projects. The scope of work is specifically governed by CPV code 44115210 and PPC Category W0430-Plumbing, ensuring that all provided supplies meet these technical standards. Managed by the Government of Jamaica, the contract falls under NAICS code 332998. The primary responsibility of the supplier is to provide and deliver completed shipments of plumbing materials to the designated project sites as required by the health services organization.

St. Thomas Health Services

POSTED

about 1 month ago

DEADLINE

Manufacture of Cartridge Seal AssembliesThis subcontract with the Defense Logistics Agency under the Department of Defense involves the full-scale manufacturing of Cartridge Seal Assemblies, identified by NSN 2915-00-316-2158. The scope of work requires strict adherence to military specifications and encompasses all stages of production, including precision machining, assembly, rigorous quality control, packaging, and the provision of necessary documentation. The project is categorized under NAICS code 332998 and was posted on August 17, 2026. The contract ensures that all manufactured components meet the precise technical requirements mandated for military use, with the Defense Logistics Agency serving as the primary overseeing agency.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Seal Assembly Manufacturing and SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and supply of military-specification seal assemblies. The contractor is responsible for ensuring all products meet strict military standards, specifically regarding packaging, marking, and documentation compliance with MIL-STD-129 and DFARS requirements. The project falls under NAICS code 332998 and was posted on August 17, 2026. This agreement ensures that the produced seal assemblies adhere to rigorous federal acquisition regulations and defense logistics specifications for quality and delivery.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Manufacture and Supply of Engine Starter SealsThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and supply of 23 military-spec engine starter seals, identified by NSN 2995009398495. The contractor is required to ensure all products are compliant with Department of Defense standards regarding packaging, labeling, and cybersecurity. The project falls under NAICS code 332998 and was posted on August 17, 2026. All deliverables must meet the specific technical requirements and regulatory standards mandated for military hardware procurement.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Surplus Diaphragm and Plate Assembly SupplyThis subcontract with the Defense Logistics Agency involves the supply of five unused surplus Diaphragm and Plate Assemblies, identified by NSN 1660-00-242-5928 and Part Number 1611734-1. The contractor is required to ensure full traceability and strict compliance with all applicable aerospace standards for these components. The finished goods are to be delivered to DLA Jacksonville. This procurement falls under NAICS code 332998 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Plug Component Supply (NSN 5342-01-126-8512)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, covers the supply of plug components identified by part number BPF-5258 and national stock number 5342-01-126-8512. The components are manufactured by Gardner Denver Nash LLC and are to be delivered F.O.B. origin from Charleroi, Pennsylvania. The contract is categorized under NAICS code 332999 and was posted on August 17, 2026. It establishes the procurement requirements for these specific parts to support agency operations through the designated manufacturer.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Rupturable Disk Manufacturing and SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and delivery of six precision rupturable disks, identified by part number 844103-1 and national stock number 4820015408288. These components are designed for use in aerospace or defense safety systems and must strictly adhere to all applicable military specifications. The procurement is categorized under NAICS code 332998 and was posted on August 17, 2026. The contract ensures the supply of critical safety hardware necessary for defense operations, with all production and quality standards managed through the specified agency guidelines.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Precision Bearing Supply and ManufacturingThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and supply of precision plain bearing units, specifically part number EEE16P with CAGE code 87946. The scope of work requires the contractor to produce these units according to strict military specifications, ensuring all quality control standards are met and providing the initial packaging for the components. The agreement is categorized under NAICS code 332998 and was posted on August 17, 2026. This procurement effort focuses on the technical production and delivery of specialized hardware to support defense logistics requirements.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Precision Machined Key, Wheel, Disk Drive Components SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the supply of 936 precision-machined mechanical components identified as NSN/Part 1630014113185. The components are specifically designated as disk drive wheel keys and must strictly adhere to Department of Defense specifications. The agreement mandates zero tolerance for quantity variance and specifies that delivery terms are FOB origin. The contract falls under NAICS code 332998 and was posted on August 17, 2026.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Nonmetallic Hose Supply (NSN 4720-00-817-7781)This subcontract involves the supply of 175,000 nonmetallic hoses for the Department of Defense Fluid Handling Division, specifically for DLA Land and Maritime projects. The contractor is responsible for manufacturing or sourcing hoses with a 7 inch inner diameter and a length of 35 feet, ensuring there are no residual lengths. Performance requires a valid CAGE code and adherence to strict DLA marking and packaging specifications. A critical component of the agreement is the execution and documentation of First Article Testing, with the final test report due within 90 days. The place of performance is located in San Diego, California. The total deliverable consists of the specified quantity of hoses and the accompanying First Article Test Report.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

in about 1 hour

Supply of Bulkhead Fittings (NSN 4730-01-198-0845)This subcontract with the Department of Defense Fluid Handling Division requires the manufacture or sourcing of eight bulkhead fittings meeting NSN 4730-01-198-0845 technical specifications. The contractor is responsible for delivering these units to the government destination in New Cumberland, ensuring all items are packaged and labeled according to MIL-STD-129 and accompanied by safety data sheets per Federal Standard No. 313. Compliance is mandatory regarding 29 CFR 1910.1200 and FAR 52.223-7 concerning radioactive material. The opportunity is categorized under NAICS code 332996, with a response deadline of September 30, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M4-27-Q-0002

This solicitation, issued by DLA Land and Maritime Fluid Handling Division, is a Request for Quotations for the procurement of nonmetallic hoses, specifically 7-inch ID, 35-foot length rubber hoses designed for petroleum-based fuels and water services. The requirement consists of two primary line items totaling 175,000 units, with delivery requested within 815 days after order. The contract is structured as a Firm Fixed Price award, and the government will evaluate quotes based on best value, considering price, offered delivery, and past performance. The items are identified as commercial items and are subject to strict technical specifications, including a prohibition on the use of Class I ozone-depleting chemicals and mercury. A critical component of this procurement is the First Article Testing (FAT) requirement. Contractors must submit a first article test report within 90 calendar days of the contract award, with a follow-up notification of satisfactory results required within 30 days of report completion. While general supplies are subject to inspection and acceptance at the origin, the FAT requirement mandates government inspection at the source and acceptance at the destination. Additionally, the product must adhere to specific shelf-life protocols, requiring Type I markings that include both the cured date and expiration date on all levels of packaging and the items themselves. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 hour

HOSE, NONMETALLIC

Solicitation # SPE7M4-26-T-410M

The Department of Defense, through the DLA Land and Maritime Fluid Handling Division, is soliciting quotations for the procurement of 4,975 feet of 3/4 bulk length nonmetallic hose, identified by NSN 4720-00-554-8088. This item is classified as a commercial product and is subject to the Qualified Products List (QPL) or Qualified Manufacturers List (QML). The procurement is governed by technical and quality requirements set forth in the DLA Master List, specifically referencing MIL-DTL-8788G and MIL-STD-129R. The item is designated as a critical application item with a non-extendable shelf life of 120 months, requiring specific shelf-life markings on all packaging levels. Delivery is required within 164 days of award, with a need ship date of March 9, 2027, and a final required delivery date of March 29, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must comply with MIL-STD-2073-1E and RP001 requirements. Contractors are required to use the Wide Area Workflow (WAWF) system for electronic submission of payment requests and receiving reports. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material labeling standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7M4-26-T-410Y

Solicitation SPE7M4-26-T-410Y, issued by the DLA Land and Maritime Fluid Handling Division, seeks quotes for 44 units of mounting plates identified by NSN 2040017171838. This is a restricted source item requiring engineering source approval by the government design control activity. The procurement is conducted under NAICS 114119 with delivery specified as FOB Origin and a required delivery window of 164 days. Inspection and acceptance will occur at the destination, with shipments directed to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict environmental and quality compliance, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DIBBS portal.

Other Marine Fishing

POSTED

DEADLINE

HOSE, PREFORMED

Solicitation # SPE7M4-26-T-410B

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BULKHEAD, FITTING

Solicitation # SPE7M3-26-T-7245

Solicitation SPE7M3-26-T-7245 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of eight aluminum alloy bulkhead fittings. The required items are specified as American Turbo Systems Inc part number 101121 (NSN 4730011980845), featuring an anodized finish, a tube size ranging from 3/16 to 1/4 inch O.D., a .625 inch wrenching feature, and an overall length between 1.93 and 1.95 inches. These components are used on Tiernay Turbines Inc model AM32C-10C air conditioners. The contract specifies a delivery window of 203 days after the order date, with shipping terms set as FOB Origin. Delivery is to be made to the DLA Distribution DDSF New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. This procurement is designated as a small business set-aside under NAICS code 332996, and all quotes must be submitted electronically via the DLA Internet Bid Board System.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

ELBOW, TUBE TO BOSS

Solicitation # SPE7M3-26-T-9104

Solicitation SPE7M3-26-T-9104 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 372 carbon steel alloy tube-to-boss elbows. These critical application items must feature a 90 degree flow angle, a 1/4 inch O.D. male threaded 37 degree flared tube size, and a 3/8 inch O.D. male double threaded boss, including a nut and washer. The hardware must be manufactured in accordance with the SAE standard for hydraulic tube fittings and TDP Rev B Gen 2. The required delivery date is September 11, 2026, with a delivery window of 74 days after the award. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Albany in Georgia. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Prohibitions are in place against the use of additive manufacturing processes, class I ozone depleting chemicals, and the intentional addition of mercury. Offerors must comply with the Buy American Act and Berry Amendment, and are required to use the Wide Area WorkFlow system for invoicing. Evaluation preferences are available for SBA-certified HUBZone small businesses. The solicitation incorporates various DFARS and FAR clauses regarding cybersecurity, whistleblower rights, and the prohibition of covered defense telecommunications equipment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-410R

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

SUPPORT, SLEEVE

Solicitation # SPE7M4-26-T-410T

Solicitation SPE7M4-26-T-410T is issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 110 sleeve supports, identified by NSN 4730-01-144-7579. These critical application items for naval use consist of nickel aluminum bronze rings with Buna-N bonding, featuring a 4.400 inch inner diameter and a 4.930 inch outer diameter. The items are subject to a 180-month extendable shelf life and must adhere to specific technical and quality requirements, including ASTM B505 Alloy C-958 as an approved alternate material. This is a Service-Disabled Veteran-Owned Small Business set-aside, requiring SBA certification for eligibility. The contract specifies delivery FOB Origin with an original required delivery date of December 14, 2026, and a need ship date of March 9, 2027. Inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-129 and DLA requirements, utilizing specific preservation methods and containers. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

NUT, TUBE COUPLING

Solicitation # SPE7M4-26-T-410V

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-388A

Solicitation SPE7M4-26-T-388A is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of nine nonmetallic hose assemblies. The specified assemblies must have a nominal inner diameter of 0.500 inches, a nominal overall length of 92.50 inches, and a maximum operating pressure of 5,000 pounds per square inch. The items are associated with NSN 4720016539088 and Electric Boat Corporation part numbers 218086886 and H624-1101-F120. Delivery is required within 168 days, with a need ship date of March 9, 2027, and a final delivery date of March 23, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. The terms are FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific handling requirements include closing all openings with plugs or end caps, individually coiling hoses to prevent kinking, and utilizing waterproof barrier bags under Preservation Method 31. All associated hardware must be secured in individual bags within the unit container. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by NAICS code 326220 and incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS