Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Packing Lower Kelly Bar 3" I.D. for Texoma 330-12

Active

State & Local

Response Deadline08/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply and delivery of a specific drilling equipment component known as the Packing Lower Kelly Bar with a 3-inch inner diameter, designated for use with the Texoma 330-12 system. The scope is strictly limited to the provision of the part itself, with no installation, assembly, or any additional services included. The component must be sourced exclusively from an approved manufacturer to ensure compliance with technical and quality standards. The solicitation was posted on August 3, 2026, with a response deadline of August 10, 2026, indicating a one-week window for submissions. It is classified as a subcontract under NAICS code 332994, which corresponds to other fabricated metal product manufacturing. The contracting agency is Nashville Electric Service, with the place of performance listed as Nashville, though no further geographic details beyond the city are provided. Interested parties must respond through the vendor portal linked in the contract data.

General Info

Supply 3-inch Packing Lower Kelly Bar for Texoma 330-12 by August 10, 2026, from approved manufacturer, no services included.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of a specific drilling equipment component: Packing Lower Kelly Bar 3" I.D. for Texoma 330-12. No installation or additional services required. Must be sourced from approved manufacturer.

Similar Contracts

Same NAICS industry code

Precision Valve Manufacturing and AssemblyThe contract calls for the manufacture and final assembly of a rotary select valve in strict adherence to DLA specifications and applicable military standards, covering materials selection, dimensional tolerances, performance testing, and full traceability of components throughout production. The work must meet rigorous defense-grade requirements to ensure reliability and durability under operational conditions, with all processes documented to maintain compliance with federal acquisition regulations and quality assurance protocols. The subcontract is targeted toward skilled manufacturers capable of precision machining and integrated assembly under controlled environments. The solicitation, issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, is classified under NAICS code 332994 for other fabricated metal product manufacturing and is open for responses until August 14, 2026. The place of performance and specific delivery location are not detailed in the posting, but all work must align with the technical and logistical expectations of the U.S. military supply chain. Interested parties must submit proposals through the designated DIBBS portal by the stated deadline to be considered for award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Grooved Coupling Clamp SupplyThe contract requires the supply of 45 units of grooved coupling clamps with part number 998HT-0450, manufactured in strict accordance with Detroit Diesel drawing 23506306, Revision 57. Each unit must be fully traceable with documentation supporting every stage of production and material sourcing, and all items are subject to zero non-conformance inspection standards, meaning they must meet exacting quality requirements with no tolerance for defects. The work is to be performed under a subcontract arrangement, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 3, 2026, and responses must be submitted by August 11, 2026. The NAICS code 332994 categorizes this as a specialty metal product manufacturing procurement, and the contracting activity falls under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Gasket Supply for Defense ApplicationsContract calls for the supply of 182 specialized asbestos-free gaskets designated by NSN 5330015162090, engineered to meet military specifications for use in defense and naval systems. Each unit must be manufactured, packaged, and labeled in full compliance with federal standards for hazardous materials, including the submission of complete safety data sheets and military-compliant packaging to ensure safe handling and transportation. The gaskets are intended for performance at a designated location in Tracy, California, with a zip code of 95304-5000, and the contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support. The solicitation, identified by the DIBBS link and posted on August 3, 2026, requires responses to be submitted no later than August 14, 2026, with NAICS code 332994 indicating the classification within miscellaneous fabricated metal product manufacturing. All deliverables must align precisely with defense procurement requirements to ensure seamless integration into operational platforms.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Precision Fastener Supply – Plain Studs (NSN 5307014572738)The contract requires the supply of twelve plain studs specified under NATO Stock Number 5307014572738, manufactured to meet exacting military standards with full traceability from raw material to final product. Each stud must be packaged and labeled in strict accordance with Department of Defense logistics guidelines to ensure proper identification, handling, and integration into military supply chains. The work is to be performed for the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance location set at Tracy, California, ZIP 95304-5000, and the contract type is designated as a subcontract under NAICS code 332994 for other fabricated metal product manufacturing. Responses must be submitted by August 11, 2026, with the solicitation posted on August 3, 2026, and all deliverables must align with defense-specific compliance protocols for quality, documentation, and delivery timelines.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Moisture Separator Manufacturing / SupplyThe contract seeks the manufacture or supply of one industrial moisture separator unit designed for use in fluid and gas systems, with strict compliance to military specifications. The requirement is issued under the NAICS code 332994 and is structured as a subcontract, targeting vendors capable of delivering a unit that meets rigorous defense-grade performance and quality standards. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, providing a narrow window for interested parties to submit proposals. The place of performance is designated as FPO with a zip code of 96691-3300, indicating delivery is expected to a military postal address typically serving overseas or deployed operations. This procurement is managed under the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS organization, underscoring its critical role within naval and maritime infrastructure systems.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Precision Machined Adapter ManufacturingA single unit of a Straight Pipe-to-Hose Adapter with NSN 4730017084070 is being procured under a subcontract to meet stringent military specifications, requiring full manufacturing capabilities including precision machining, surface finishing, and rigorous quality inspection to ensure compliance with defense standards. The work must be performed in accordance with federal military requirements for durability, dimensional accuracy, and material integrity, with the place of performance designated as FPO, zip code 34085. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and falls under NAICS code 332994 for other fabricated metal product manufacturing. The contracting entity is the Fluid Handling Division of the Department of Defense, and the procurement is managed through the DIBBS platform with the link provided for official submission.

FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

Precision Tube Fitting SupplyThe contract calls for the supply of a precision stainless steel tube fitting, specifically a TEE configuration, identified by a designated part number and National Stock Number, as a commercial off-the-shelf component. The procurement is classified as a subcontract under the NAICS code 332994, indicating it falls within other fabricated metal product manufacturing, and is being managed by the Fluid Handling Division of the Department of Defense. The requirement is for delivery to a place of performance in San Diego, California, with a zip code of 92136. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is accessible via a public link hosted on the DLA BSM system. No set-aside provisions or specific point of contact details are provided, and no office address beyond the performance site is listed.

FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

RACK, STORAGE, SMALL

Solicitation # SPE7L1-26-T-859J

The contract solicitation SPE7L1-26-T-859J is a Total Small Business Set-Aside under FAR 19.5 for the procurement of 32 units of NSN 1095017108626, a small storage rack, with 16 units allocated to each of two CLINs at a unit price of $16.00, resulting in a total estimated value of $512.00. Delivery is required within 20 days of award, with FOB Origin terms applying, and all items must be delivered to Fort Carson, Colorado, specifically to the address designated for CS BN CO A DISTRIBUTI at 4885 Chlies Avenue. Inspection and acceptance occur at the destination, and the packaging must strictly comply with MIL-STD-2073-1E, including clean/dry preservation methods, fiber wrapping, paper cushioning, and packaging in fiberboard boxes at level B with individual item unit packaging. Marking must adhere to MIL-STD-129, mandating standardized labeling with NSN, contract number, and 2D Data Matrix barcodes, while special marking is not required. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and all supplies must be accompanied by supply chain traceability documentation as required by DLA Procurement Note C03, which mandates contractor retention of such records. The contract includes stringent cybersecurity and information safeguarding clauses, including 252.204-7012 for safeguarding covered defense information and cyber incident reporting, and 252.240-7997 for NIST SP 800-171 compliance, alongside prohibitions on covered defense telecommunications equipment and hazardous materials. The offeror must certify compliance with federal regulations for hazardous materials, submit Safety Data Sheets per 29 CFR 1910.1200, and notify the government prior to delivery if any item contains radioactive material exceeding specified thresholds. The contract mandates electronic invoicing through WAWF, and full socioeconomic representation as a small business is required, with UEI and CAGE code disclosures enforced for compliance with 252.204-7016 and subcontracting standards. The solicitation closes on August 6, 2026, and submissions are exclusively through the DIBBS portal, with no physical or alternative

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-910B

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

DRIVE ASSEMBLY, ELEC

Solicitation # SPE7L1-26-T-910L

This contract is for the procurement of five electric drive assemblies identified by NSN 1005-01-552-0384 under solicitation SPE7L1-26-T-910L, with delivery required within 157 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring mandatory registration with the Directorate of Defense Trade Controls prior to award; failure to provide registration documentation will result in disqualification. The drive assembly is subject to strict militarization requirements as a Category I munitions item, and must not contain intentional mercury or mercury compounds except in expressly permitted applications such as functional batteries, sensors, or weapon systems, with additional containment and safety standards for portable devices. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking and palletization under DLA’s procurement standards. The supplier must also maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance. Delivery is FOB origin with zero quantity variance allowed and inspection and acceptance occurring at the destination. The contract includes specific shipping instructions and a designated point of contact for inquiries, with the original delivery deadline set for July 6, 2028, and a required ship date of January 19, 2027.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

COVER, BOX, ACCESSORI

Solicitation # SPE7LX-26-U-9205

This contract pertains to the supply of a cover, box, and accessories identified by NSN 1095-01-661-8633 and part number 04-21046 Revision A, with a total quantity of three units, each to be delivered within 78 days under FOB origin terms. The requirement is for a direct DLA acquisition within the contiguous United States and carries a strict zero percent quantity variance, meaning exact delivery of three units is mandatory. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 marking and labeling standards and be palletized in accordance with DLA Packaging Requirements RP001. The contractor must retain detailed supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). The solicitation number is SPE7LX-26-U-9205, issued under NAICS code 332994, with the primary point of contact being Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

HANDGUARD, UPPER

Solicitation # SPE7L1-26-T-909S

The contract pertains to the procurement of 515 units of a HANDGUARD, UPPER assembly, a critical firearm component subject to stringent defense regulations and technical controls. It is classified as a Defense Article under the International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring all manufacturers and exporters to register with the Directorate of Defense Trade Controls (DDTC); failure to provide proof of registration will result in disqualification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is covered by a Knights Armament Company License Agreement, mandating strict non-disclosure of restricted technical data, and vendors must complete and return the prescribed license form via the DLA portal. Phosphate coating must meet certified supplier requirements, and manganese coating is mandated over zinc if either is an option. All manufacturing and subcontracting activities must be disclosed to the Contracting Officer, and any changes require formal modification. Product Verification Testing (PVT) may be conducted prior to each shipment, requiring five samples from each subcontractor, with one sample potentially destroyed during testing. No Certificate of Conformance is permitted. The item is subject to Demilitarization requirements as a Category I munition component and controlled technical data under ITAR or EAR, with distribution restricted to contractors holding US/Canada Joint Certification Program approval, having completed mandatory export control training, and receiving DLA authorization. Ozone-depleting chemicals are prohibited, mercury-containing substances are banned except in specified functional applications, and packaging must comply with DLA standards. Inspection occurs at the manufacturer’s facility by DCMA QAR, and only QPL/QML-qualified components may be used. Delivery is due within 366 days from award.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of CUMMINS FF63041NN Fuel FiltersThe contract requires the procurement and delivery of 42 units of the OEM-specified FLEET FF63041NN fuel filter, which is equivalent to the CUMMINS FF63041NN model, for use exclusively in Freightliner vehicles manufactured from 2022 to the present. No installation, maintenance, or additional services are included in the scope of work; the deliverable is limited to the physical supply of the filters. The solicitation is classified as a subcontract under NAICS code 423120, indicating a focus on wholesale trade of motor vehicle parts and supplies. The contract was posted by Nashville Electric Service, operating under the Tennessee agency designation, with the place of performance listed as Nashville. Bidders must submit responses by August 10, 2026, at 7:00 PM, following the initial posting date of August 3, 2026. All submissions must be made through the designated vendor portal at the provided URL.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Supply of HOMAC UT3 Ratchet-Type Crimping ToolsNashville Electric Service is seeking 18 units of HOMAC UT3 ratchet-type crimping tools designed for use with 1/2 inch to 5/8 inch sleeves, each featuring a locking handle mechanism that remains engaged until full compression is achieved, ensuring consistent and reliable crimps. The requirement involves no customization, installation, or additional services—only the delivery of the tools as specified. This is a subcontract solicitation with a response deadline of August 10, 2026, at 7:00 PM local time, and it was posted on August 3, 2026. The NAICS code for this procurement is 332211, indicating it falls under the manufacture of other fabricated metal products. The place of performance is identified as Nashville, with no specific state or zip code provided in the details. Interested parties must respond through the vendor portal linked in the solicitation.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Quality Inspection and Compliance Verification (Pre-Delivery)Nashville Electric Service is seeking qualified third-party inspectors to conduct pre-delivery quality verification of steel poles at manufacturer facilities, ensuring compliance with ASTM A123 for galvanized coatings and NES LSK-1230 specifications. The inspection scope includes detailed assessment of zinc coating thickness, dimensional precision, and overall fabrication quality to confirm adherence to technical standards before product shipment. This subcontract opportunity is open for response until August 14, 2026, with work expected to occur at manufacturing sites nationwide, though the agency is based in Nashville, Tennessee. Interested parties must respond by the stated deadline to be considered for this procurement under NAICS code 541330, which pertains to specialized technical services for engineering and inspection activities.

Engineering Services

POSTED

DEADLINE

Specialized Delivery and Logistics for Oversized Steel PolesThe contract requires the specialized transportation of 100-foot steel utility poles to Nashville Electric Service facilities under strict logistical constraints. Deliveries are prohibited on Mondays, and all two-piece poles must be transported together on the same truck to ensure compatibility and safety. Mixed loads are strictly forbidden unless prior written approval is obtained, emphasizing the need for dedicated, single-cargo shipments. The poles must be handled with a secure, multi-layered loading system to prevent damage during transit, reflecting the sensitivity and scale of the oversized equipment involved. All deliveries must be performed to meet the exacting standards of Nashville Electric Service, with performance centered exclusively in Nashville. The contract is classified as a subcontract under NAICS code 484220, indicating a focus on specialized freight transportation. Proposals must be submitted by the deadline of August 14, 2026, and interested parties should access the full solicitation details through the official vendor portal. Compliance with all delivery protocols, timing restrictions, and handling requirements is mandatory for award consideration.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacture of 100-Foot Steel Utility Poles (Class H4 Equivalent)The contract requires the fabrication of 100-foot steel utility poles meeting a minimum structural capacity of 486 ft-kips and compliant with NES Specification LSK-1230. Each pole must be hot-dip galvanized in accordance with ASTM A123 to ensure corrosion resistance and long-term durability. The poles may be manufactured in no more than two sections, and if fabricated as a two-piece assembly, both sections must be delivered together as a single unit to ensure proper installation and structural integrity. This is a subcontract opportunity under NAICS code 332312, targeted for suppliers capable of producing Class H4 equivalent utility poles. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, at 7:00 PM. The project is managed by Nashville Electric Service in Tennessee, with performance required in Nashville. Interested parties must submit responses through the vendor portal at the designated UI link.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Titanium Step-Drill Bit SupplyNashville Electric Service is seeking to procure a single type of titanium step-drill bit featuring a titanium-nitride coating, a self-starting tip, and double-sided cutting edges with a maximum hole diameter of 7/8 inches and a 3/8-inch shank. The product must be sourced exclusively from approved manufacturers to ensure specified quality and performance standards. This subcontract opportunity is posted under NAICS code 332216 and is open for responses until August 10, 2026, at 7:00 PM. The place of performance is designated as Nashville, and interested vendors must submit their proposals via the official portal at the provided link before the deadline.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Supply of Conduit Ventilating Cable Supports (TERMINATOR 6 4/0–750–25KV 3H)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Delivery and Logistics for Utility Pole ShipmentsNashville Electric Service is seeking qualified contractors to transport and deliver 60-foot steel utility poles to designated sites across Nashville, Tennessee, with exacting requirements for delivery scheduling, load segregation, and operational coordination. The contract mandates strict compliance with pre-established delivery windows, proper separation of loads to ensure site-specific allocation, and seamless communication with site personnel to avoid delays or misplacements. All shipments must be handled with precision to maintain integrity of the poles and meet the operational needs of NES infrastructure projects. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of heavy and bulky goods. The opportunity was posted on August 3, 2026, with proposals due by August 14, 2026, at 7:00 PM Eastern Time. While no set-aside provisions are specified, the work is focused exclusively on delivery services within the Nashville area, requiring local logistics expertise and reliable equipment capable of handling oversized utility poles. Interested parties must access the vendor portal via the provided link to submit bids and review full technical specifications.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacturing of Self-Weathering Steel Utility PolesNashville Electric Service is soliciting bids for the manufacturing of sixty-foot self-weathering steel utility poles具备 H5 mechanical capacity and a CORROCOTE brown finish, ensuring durability and corrosion resistance in outdoor environments. The poles must fully comply with NES LSK-1212 specifications and relevant ASTM standards to meet operational and safety requirements for electrical distribution infrastructure. This subcontract opportunity is open to qualified manufacturers with the capability to produce poles that meet exacting technical and finish criteria, with responses due by August 14, 2026. The place of performance is centered in Nashville, Tennessee, and the solicitation is accessible through the vendor portal at the provided URL. Contractors must demonstrate experience in steel pole fabrication and adherence to industry-certified standards to be considered eligible.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Terminator Cable

Solicitation # Z4923

The contract specifies the procurement of a 4/0 25KV URD terminator cable designed for terminating jacketed concentric neutral aluminum or copper primary cables with an insulation diameter ranging from .72 to 1.29 inches. The terminator must be constructed of cold shrink silicone rubber with an integrated silicone sealing compound and sealing mastic to ensure a durable, weatherproof connection. It must be supplied with a stem connector as a standard component. Only two approved manufacturers and part numbers are accepted: TE CONNECTIVITY TO-283J-NES and 3M INDUS7653-S-4-4/0. The solicitation is issued by Nashville Electric Service under reference number Z4923, with a response deadline of August 10, 2026 at 7:00 PM. The contract is targeted toward state, local, and education entities and will be performed in Nashville, Tennessee. Procurement inquiries should be directed to Jay Thompson at the provided phone number and email address.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Solicitation # Z4917

The contract requests a ratchet-type crimping tool specifically designed for 1/2 inch to 5/8 inch sleeves, with a safety feature that prevents the handle from releasing until full compression is achieved, ensuring consistent and safe crimping performance. Only the approved manufacturer part number HOMACUT3 is acceptable, and no alternatives will be considered. The solicitation, identified by number Z4917, was posted on August 3, 2026, with a response deadline of August 10, 2026, at 7:00 PM. This procurement is issued by Nashville Electric Service under the Tennessee state agency classification and is intended for performance in Nashville, Tennessee. The primary point of contact for procurement inquiries is Alan Martinez, who can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. All bids must be submitted through the official vendor portal linked at https://vendor.nespower.com/?bid=Z4917.

POSTED

DEADLINE

Solicitation # Z4914

The contract solicits packing components for a lower kelly bar with a 3-inch internal diameter, specifically designed for use with the Texoma 330-12 model, with approved manufacturers and part numbers limited to REEDRILL0010154 and H&TH10154T. The solicitation, numbered Z4914, is issued by Nashville Electric Service under the Tennessee state agency and is classified as a state, local, or educational entity procurement. Bidders must submit responses by August 10, 2026, at 7:00 PM Eastern Time, with the solicitation posted on August 3, 2026. The place of performance is in Nashville, Tennessee, and all communications and submissions must align with the specifications provided in the contract. Alan Martinez, the designated Procurement Contact, serves as the primary point of contact with email amartinez@nespower.com and phone number 615-747-3720, and all relevant information and submission portals are accessible through the official vendor link provided.

POSTED

DEADLINE