Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Plain Self-Lubricating Bearings (P/N 4049T74P01)

Active

Federal

Response Deadline09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-07MM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, PLAIN, SELF-

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies plain self-lubricating bearings for prime contractors on ASC Commodities Division projects. Procures and delivers bearings meeting Part Number 4049T74P01 and NSN 3120010879397, sourced exclusively from approved CAGE codes 50632 (Kamatics Corp) or 99207 (General Electric Co.). Performs bare item marking for physical identification. Complies with Source Control and Critical Application Item standards. Delivers 49 total units.

Similar Contracts

Same NAICS industry code

Request for Offer (RFO) Annual Contract for Case & Caterpillar Parts

Solicitation # 6100019776

The City of San Antonio is seeking bids under solicitation number 6100019776 to provide replacement parts for Caterpillar and Case construction equipment. This annual contract will support the Solid Waste Management Department, as well as the Public Works and Parks and Recreation Departments, ensuring the maintenance of city-owned machinery including loaders, dozers, excavators, backhoes, and paving equipment used for various municipal construction projects. The response deadline for this solicitation is September 25, 2026, at 4:00 PM. Interested parties can coordinate with primary points of contact Trisha Jones and Troy Elliott. The contract is managed by the city's finance and procurement divisions to ensure the availability of essential parts for heavy equipment operating throughout San Antonio, Texas.

CITY OF SAN ANTONIO

POSTED

about 12 hours ago

DEADLINE

ITB-CS - Safety Products, Equipment & Supplies

Solicitation # 2026-033

The City of Bartow, Florida, through its Public Works department, is seeking proposals under solicitation 2026-033 for the ongoing procurement of safety products, equipment, and supplies. The primary objective is to establish a reliable supply chain that allows city personnel to acquire necessary safety items in a timely and cost-effective manner while adhering to official policies. This initiative emphasizes open competition and inclusive procurement practices to ensure operational efficiency and public awareness. The solicitation was posted on September 4, 2026, with a response deadline of September 24, 2031. Interested parties can coordinate with Joseph Bailey, the Public Works Construction Manager, or Adaira Morales, the Procurement Analyst. Performance of the contract will take place within the state of Florida, specifically supporting the needs of the city government in Bartow.

POSTED

about 18 hours ago

DEADLINE

in about 5 years

OEM Material Handling Equipment Parts and Fluids Supply

Office Of Naval Intelligence

POSTED

about 22 hours ago

DEADLINE

SCIF Breaching Kit Supply

W7NE Uspfo Activity Maang 102

POSTED

about 22 hours ago

DEADLINE

270000900052,RFQ,82,1 - NH78 NON-METALLIC CHAIN DRIVE

Solicitation # 231861

The City of Los Angeles is soliciting bids for contract 270000900052, specifically for the procurement of NH78 non-metallic chain drives. This request for quotation, identified by solicitation number 231861, requires responses to be submitted by September 10, 2026, at 2:00 PM. The performance of the contract will take place in Los Angeles, California. Interested vendors should coordinate with Charla Hillary via email for specific inquiries regarding the bid. Participation may require formal registration on the City of Los Angeles official website to ensure compliance with local procurement regulations.

City of Los Angeles

POSTED

DEADLINE

Bulk Sodium Chloride (Road Salt) Supplier and HaulerThis subcontract involves the procurement and delivery of bulk Sodium Chloride road salt to support winter deicing projects within the Virginia Department of Transportation Culpeper District. The selected provider will be responsible for sourcing the material and transporting it via heavy-duty bulk salt trucks to various municipalities and agencies throughout the district. To be eligible, the contractor must be authorized to transact business within the Commonwealth of Virginia. The opportunity is categorized under NAICS code 423840 and requires responses by September 8, 2026.

Virginia Department of Transportation

POSTED

DEADLINE

Supply of Tilting Gyro TableThis subcontract through the Department of Defense ASC Supplier Order OEM Division involves the procurement and delivery of one Tilting Gyro Table for prime contractors supporting DLA supply contracts. The required hardware must match NSN 4920-01-718-1334 and Part Number 930-100-001, with strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The completed and marked equipment must be delivered to JBPHH in zip code 96853-1801 within 20 days of the contract award. This opportunity falls under NAICS code 423840 and was posted on September 3, 2026, with a response deadline of September 11, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Spacer Plates (P/N 162/01557)This subcontract involves the procurement or manufacture of two mechanical spacer plates, part number 162/01557 and NSN 5365998795533, for J.C. Bamford Excavators Limited. The items are intended for prime contractors fulfilling DLA supply contracts under the Department of Defense Aviation Supply Chain ESOC Buys. The contractor must ensure all items are packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with shipments palletized according to RP001. Final delivery of the two units is required at Fort Hood, Texas. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026, under NAICS code 423840.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Retainer Tool (NSN 2835011428584)This subcontract involves the procurement and delivery of one Retainer Tool, identified by NSN 2835011428584, for the Department of Defense via the ASC Commodities Division. The prime contractor must ensure the tool complies with all technical and quality requirements specified by the R or I numbers found in the DLA Master List of Technical and Quality Requirements. A valid CAGE code is required for participation in this contract. The completed tool is to be delivered to the designated government location at Mayport Naval Station, Florida. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026. This requirement falls under NAICS code 423840.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Sleeve and Slide Assembly, Matched Set

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Sensing Element, Fire D (NSN 6340-01-322-8526)This subcontract through the Department of Defense Aviation Supply Chain involves the procurement of one Fire D Sensing Element, identified by NSN 6340-01-322-8526. The selected provider must source hardware that meets all technical specifications and manage the international freight shipping of the component to Bizerte, Tunisia. Eligible candidates are required to possess a valid CAGE code, active SAM registration, and the capability to obtain the necessary export licenses for delivery to Tunisia. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026, under NAICS code 423840.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Supply of Eaton Aeroquip Tube-to-Hose ElbowsThis subcontract involves the sourcing and delivery of nine Eaton Aeroquip Tube-to-Hose Elbows, part number 8891-10D and national stock number 4730LNCC0151, to support prime contractors fulfilling DLA supply contracts. The supplier must ensure all components comply with the DLA Master List of Technical and Quality Requirements, with delivery terms set as FOB Destination. The contract is managed under the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with the place of performance located in Cherry Point. Operating under NAICS code 423840, the procurement process includes a response deadline of September 11, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Solicitation # SPE4A6-26-R-XD60

This solicitation, identified as SPE4A6-26-R-XD60 and issued by the Department of Defense ASC Commodities Division, seeks quotations for ten units of a wiring harness, NSN 5995-01-680-2478, part number 070647-0001 from Leonardo US Cyber and Security. The requirement is for a critical application item identified as a commercial product with no shelf life requirement. The contract will be awarded as a firm fixed price bilateral indefinite delivery purchase order with a total ceiling of 350,000 dollars over a five-year base period. Delivery is required within 118 days after order, with FOB origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Specific technical and quality requirements include the removal of government identification from non-accepted supplies per RQ011 and physical identification per RQ017. Surplus materials are explicitly deemed unacceptable for this national stock number. All submissions must be uploaded via DIBBS by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-26-R-XD59

This solicitation, identified as SPE4A6-26-R-XD59 and issued by the Department of Defense ASC Commodities Division, is for the procurement of electrical insulation sleeving under NSN 5970-01-508-5746. The requirement is for 17 rolls, with each roll consisting of 50 feet, specifically referencing Whitmor Plastic Wire and Cable Corp part number WZ102. This is a critical application item provided under a firm fixed price agreement with a delivery schedule of 150 days after receipt of order. The contract allows for no quantity variance and specifies that both the inspection and acceptance points are at the destination, with shipping terms set as FOB Origin. The procurement adheres to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. Sampling and quality assurance must comply with MIL-STD-1916 or ASQ H1331, utilizing specific verification levels for critical, major, and minor attributes. The solicitation was posted on September 4, 2026, with a response deadline of September 22, 2026. It is structured as an unrestricted solicitation for a bilateral award that may include a five-year base period with a total value cap of 350,000 dollars.

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-XD62

This solicitation, identified as SPE4A6-26-R-XD62, is issued by the Department of Defense ASC Commodities Division for the procurement of 300 units of backup lights under NSN 6220-01-375-3530. The contract is a total small business set-aside and is intended to result in a bilateral indefinite delivery purchase order with a five-year base period and an aggregate value up to 350,000 dollars. The pricing is based on a firm fixed price with a delivery requirement of 190 days after order. The contract mandates strict adherence to various DLA technical and quality requirements, including ISO 9001:2015 standards, specific packaging and marking protocols per MIL-STD-129 and MIL-STD-2073-1E, and the use of qualified products lists. It specifies a prohibition on the intentional addition of mercury, except where functionally required and contained. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The technical data package is based on Revision B Generation 2, referencing multiple specific drawings and revisions.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # SPE4A6-26-R-XD48

Solicitation SPE4A6-26-R-XD48, issued by the Department of Defense ASC Commodities Division on September 4, 2026, seeks quotes for 143 electrical power cable assemblies under NSN 6150-01-390-7058. This is a total small business set-aside under NAICS code 335931, structured as a bilateral award with an indefinite delivery purchase order for stock buys over a five year base period. The required delivery timeframe is 345 days after the order is placed. The contract contains strict export control requirements under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification who have completed the required training and questionnaires. All shipments must adhere to DLA packaging requirements RP001.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-0275

This is a sole source set-aside for an SBA Certified Women-Owned Small Business to establish an Indefinite Quantity Contract for a specific cable assembly used in F-15 Eagle aircraft. The contract consists of a five-year base period with no additional options, featuring an estimated annual demand of 16 units and a required delivery timeframe of 313 days to facilities within the Continental United States. Only vendors proposing the approved sources of supply, Safran Electrical Components USA, Inc. or Jo-Kell Inc., will be considered. Due to the critical nature of the application, the item is subject to strict export controls under ITAR and EAR regulations. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be authorized by the DLA controlling authority to access technical data. The procurement process may involve a reverse auction, and proposals must be submitted to the bid custodian rather than through the DIBBS system.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD57

Contract SPE4A6-26-R-XD57 is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 10 special purpose electrical cable assemblies, identified by NSN 5995-01-530-3551 and Caton Connector Corporation part number 2CA30982-2L6. This firm fixed price acquisition is structured as a bilateral indefinite delivery purchase order for stock buys with a base period of five years and an aggregate contract value up to 350,000 dollars. Delivery is required within 95 days after order, with inspection and acceptance occurring at the destination and shipping handled as FOB origin. The contract mandates strict adherence to various technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware and packaging, except where specifically allowed for functional components like batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD14

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XD14, is for the procurement of 21 units of a special purpose branched electrical cable assembly, identified by NSN 6150-01-633-1590. The requirement is a total small business set-aside and will result in a bilateral indefinite delivery purchase order for stock buys with a five-year base period and an aggregate ceiling of 350,000 dollars. Delivery is required within 90 days after receipt of order. Due to the nature of the technical data, this contract is subject to strict export controls under the International Traffic in Arms Regulations and the Export Administration Regulations, as well as DFARS 252.225-7048. Access to this technical data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Interested parties must be registered in SAM and submit quotations by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

MANIFOLD, PNEUMATIC SENSOR

Solicitation # SPE4A6-26-R-0294

This procurement solicitation is for the acquisition of 79 pneumatic manifolds intended for use in F-16 aircraft, identified by NSN 6610-011491465. The requirement is restricted to approved original equipment manufacturers Rosemount Aerospace Inc. and Honeywell International, Inc. This is an unrestricted procurement where the government intends to negotiate with these specific approved sources. The contract includes a mandatory Government First Article Test, with a production delivery schedule of 417 days after receipt of order. Terms of delivery are FOB Origin, and inspection and acceptance will also occur at the origin. The solicitation is expected to be issued on or about September 2, 2026, with a response deadline of October 2, 2026. Interested parties may submit proposals or express interest and capability within forty-five days of publication. Because the items involve restricted data, contractors must be certified by the DoD to access unclassified data via DD Form 2345. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Interested vendors can access the full solicitation through the DLA Internet Bid Board Systems.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month

CABLE AND CONDUIT ASSEMBLY, ELECTRICAL

Solicitation # SPE4A6-26-R-XD58

This contract solicitation, identified as SPE4A6-26-R-XD58 and issued by the Department of Defense ASC Commodities Division, is for the procurement of ten electrical cable and conduit assemblies, specifically NSN 6150-01-475-7629 and Robertson Fuel Systems part number HM022-100-21. The requirement is for a critical application item under a firm fixed price agreement with a delivery timeline of 500 days after order. The procurement is intended to result in a bilateral indefinite delivery purchase order with a five year base period and an aggregate contract ceiling of 350,000 dollars. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standards MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Inspection and acceptance will occur at the destination, while the shipping terms are FOB origin. Technical and quality requirements are governed by the DLA Master List, including specific provisions for the removal of government identification from non-accepted supplies and physical item marking.

Other Communication and Energy Wire Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation Services

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Manufacturing of Annular Ball Bearings (P/N 365384-1)

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306004278710)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE