Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Plastic Colorimeter Sample Cells

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the manufacture and supply of plastic colorimeter sample cells meeting precise specifications: 1 inch in diameter, 10 mL capacity, and a 1 cm pathlength, each equipped with appropriate caps. These components must fully comply with the National Stock Number NSN 6630015208479, ensuring alignment with military and medical supply standards. The items are intended for use in diagnostic and analytical applications within defense medical operations, requiring consistent quality and dimensional accuracy to support reliable colorimetric measurements in field and laboratory environments. The solicitation, issued under subcontract type by the Department of Defense through the Medical Supply Chain MD Surg FSF, has a response deadline of August 10, 2026, with the posting date set for August 3, 2026. Performance will occur at a military postal address in FPO with ZIP code 96632, indicating delivery to a deployed or overseas operational location. The NAICS code 326299 categorizes this procurement under other plastic product manufacturing, reflecting the non-standardized, specialized nature of the components. Participation requires adherence to defense supply protocols and timely fulfillment to support ongoing medical logistics operations.

General Info

Manufacture and supply of 10 mL, 1 cm pathlength plastic colorimeter cells per NSN 6630015208479 for defense medical use.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

FPO, AP, 96632, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of plastic colorimeter sample cells, 1 inch diameter, 10 mL capacity, 1 cm pathlength, with caps, compliant with NSN 6630015208479.

Similar Contracts

Same NAICS industry code

PAD, CUSHIONING

Solicitation # SPE7L1-26-Q-1394

The contract is for the procurement of 15,000 units of a molded track cushioning pad assembly, identified by NSN 5340-01-587-6763, under solicitation SPE7L1-26-Q-1394. Delivery is required within 146 days of award, with the solicitation issued on August 4, 2026, and responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies prior to delivery. The item includes technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this controlled data. The acquisition falls under NAICS code 326299 and is managed by the Department of Defense’s Land Supply Chain, with Rodney McNinch listed as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

FLAME ARRESTER, VENT

Solicitation # SPE8ED-26-T-1217

The contract specifies the procurement of one flame arrester, vent with NSN 5430-01-724-2662 and part number 60-1006RK-01 from RKI INSTRUMENTS, INC., under solicitation SPE8ED-26-T-1217. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes considered major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements RP001, with hazardous material handled according to TQ requirement IP025 and non-hazardous material commercially packaged per ASTM D3951 when not overridden by DLA requirements. All packaging must be marked and labeled appropriately, and palletization must follow DLA standards. The material must be shipped by the fastest traceable means, with parcel post prohibited, and delivered to Sierra Army Depot in Herlong, CA. The required delivery date is July 24, 2026, and government-use identifiers and shipping instructions are strictly defined, including a designated point of contact and electronic procurement link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

Supply of Shoe Covers (Commercial Off-the-Shelf Item)The contract calls for the procurement and delivery of 60 cases of medium green plastic vinyl shoe covers manufactured from pinhole-free virgin material, each measuring 0.004 inches in thickness and standing 16 to 18 inches high, with the required brand specified as FAB OHIO INC, part number 316-4-G-16, or an equivalent approved substitute. These commercial off-the-shelf items are being sourced under a Small Business Set Aside designation, meaning only eligible small businesses may submit bids, and the North American Industry Classification System code 326299 applies to this transaction, covering other plastic product manufacturing not elsewhere classified. Delivery is expected to the place of performance in Bremerton, Washington, with a zip code of 98314, and the contract is classified as a subcontract under the Department of Defense, specifically managed by DLA Maritime - Puget Sound. Bids must be submitted by the deadline of August 5, 2026, at 5:00 PM, and the opportunity was posted on August 4, 2026.

DLA Maritime - Puget Sound

POSTED

about 13 hours ago

DEADLINE

in about 16 hours

Manufacture of Sterile Surgical Drapes

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Gasket Manufacturing and Supply

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThe contract involves the manufacture of a critical application nonmetallic hose assembly designated AE710088-135, designed to meet the stringent requirements outlined in the DLA Master List for The Boeing Company. This subcontract is part of the Department of Defense’s Fluid Handling Division’s efforts to ensure the procurement of mission-critical components that comply with aerospace and defense standards. The work must be performed in San Diego, California, with a specific zip code identifying the place of performance, and all delivered assemblies must adhere to exact technical and compliance specifications to support operational readiness. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, indicating a narrow window for submission and evaluation. The North American Industry Classification System code 326299 identifies the scope as other plastic product manufacturing, underscoring the specialized nature of the nonmetallic hose assembly production. This contract does not have a designated set-aside type, meaning it is open to all qualified bidders without preference for small businesses or other categories. The procurement is managed under the DIBBS platform, with all communications and submissions expected to follow the procedures outlined on the provided official link.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Protective Gloves Supply (Commercial Off-the-Shelf)The contract entails the supply of 8,000 pairs of chemical and oil protective gloves compliant with NSN 8415014488646, designed to meet stringent military and regulatory benchmarks for use in hazardous environments. These gloves are categorized as Commercial Off-the-Shelf items and will be delivered to perform at Beale AFB, California, with a delivery requirement tied to the contract’s operational timeline. The procurement falls under NAICS code 326299, indicating it is for other rubber product manufacturing, and is structured as a subcontract within the Department of Defense’s Medical Supply Chain framework. The solicitation was posted on August 3, 2026, with a firm response deadline of August 10, 2026, leaving a seven-day window for prospective suppliers to submit proposals. The contract is administered by the MEDICAL SUPPLY CHAIN MD SURG FSF, which coordinates vital medical and protective equipment procurement across defense operations. Although no set-aside designation is specified, the contract is publicly accessible via the DIBBS platform, ensuring transparency and encouraging participation from qualified vendors capable of delivering certified, high-performance protective gear to federal standards.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Nonmetallic Hose Supply (NSN 4720-01-541-7201)The contract seeks the supply of fifty coils of nonmetallic hose, each measuring 100 feet, identified by NSN 4720-01-541-7201, with strict compliance to U.S. Department of Defense technical and environmental standards including MIL-STD-2073-1E and NAVSEA 5100-003D. The requirement is issued as a subcontract under a Total Small Business Set-Aside, ensuring eligibility and participation exclusively by small businesses as defined by the SBA, with the NAICS code 326299 designating the industry category for other rubber product manufacturing. The offer deadline is August 10, 2026, and the performance location is specified as New Cumberland, Pennsylvania, with the procurement managed by the Nuclear Reactor Program under the Department of Defense. All delivered hose must meet exacting specifications for material composition, durability, and environmental resilience to ensure operational safety and reliability in sensitive nuclear reactor applications. The product must be packaged, labeled, and shipped in full conformance with DLA’s handling and storage directives outlined in referenced military standards. While no point of contact is listed, bidders must submit responses through the official DIBBS platform via the provided link, and all submissions must be finalized by the posted deadline to be considered. Failure to meet any technical, environmental, or procedural requirement will result in disqualification.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of N95 Disposable Particulate RespiratorsThe contract seeks the manufacture and supply of medium-sized N95 disposable particulate respirators, each case containing 160 units, to meet stringent DLA standards including RA001, RS010, RP001, and MIL-STD-2073-1E packaging specifications. These respirators are intended for delivery to Camp Foster in Okinawa and must fully comply with federal quality and packaging requirements to ensure operational readiness and safety in field conditions. The solicitation is categorized as a subcontract under NAICS code 326299, indicating the focus on other rubber and plastic product manufacturing, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The opportunity was posted on August 3, 2026, with a formal response deadline of August 10, 2026, providing suppliers a seven-day window to submit proposals. All bids must align with the designated technical and logistical criteria, with no set-aside provisions applied. The place of performance is specifically identified as Camp Foster, Okinawa, requiring precise logistics planning for international delivery. The contract details are accessible via the DIBBS portal, and while no point of contact is listed, compliance with all stated standards is mandatory for award consideration.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Polypropylene Webbing and Component SupplyThe contract seeks the supply of 2-inch polypropylene webbing and shoulder pads specifically for the assembly of a carrying litter harness, with all materials required to meet military specification standards. Full compliance with MIL-SPEC requirements is mandatory, ensuring durability, strength, and performance under rigorous operational conditions. Additionally, all components must be sourced domestically with full traceability to guarantee adherence to federal sourcing regulations and support for U.S. manufacturing. The materials are critical to the functionality of the litter harness, meaning quality and consistency are paramount to mission readiness and personnel safety. The opportunity is categorized as a subcontract under NAICS code 326299, with a response deadline of August 10, 2026, and was posted on August 3, 2026. Performance of the contract will be centered at FPO, ZIP code 96660, indicating delivery to a military postal address, likely supporting overseas or expeditionary medical operations. The contracting authority is the Medical Supply Chain MD SURG FSF under the Department of Defense, emphasizing the defense-related and medical logistics nature of the procurement. Bidders must ensure full alignment with military and federal procurement protocols, as failure to meet specifications or sourcing requirements may result in disqualification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-302U

The contract specifies the procurement of latex rubber condoms, packaged in strips of three and lubricated with nonoxynol-9 spermicide, with a total quantity of 1008 units per package. The product must have a strict 36-month shelf life, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Storage requirements mandate a cool, dry environment between 32 and 100 degrees Fahrenheit, with protection from moisture, direct sunlight, and fluorescent light. All labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, adhering to the latest revision of MMS1A. The item is classified as a TYPE I (CODE Q) shelf-life product under RS020, with no extendable life permitted. The packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted supplies. Technical and quality requirements are governed by the DLA Master List, and the solicitation is subject to the revision in effect on the award date. The North American Industry Classification System code is 326299, with the item identified by NSN 6515-01-363-6545, and delivery is required within five days of award. The contract is issued under solicitation SPE2DS-26-T-302U by the Department of Defense’s Medical Supply Chain, with bids due by August 10, 2026, and performance to be carried out at Offutt Air Force Base, Nebraska.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7M4-26-Q-0906

This contract specifies the procurement of a nonmetallic hose assembly with a 2-inch diameter and 50-foot length, identified by NSN 4720-00-109-8145 and part number M82127-08, manufactured in accordance with MIL-H-82127A revision A and referenced quality assurance provisions. The item is classified as a critical application item with a non-extendable 120-month shelf life, requiring shelf-life markings per MIL-STD-129 that include the manufactured or assembled date and expiration date. Full and open competition is in effect under a total small business set-aside, with first article testing mandated and government source inspection required at origin unless the award excludes the first article test, in which case inspection at destination is acceptable. Previous testing by the vendor may be accepted with certification of conformance if no design, process, or testing changes have occurred. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including palletization and marking per MIL-STD-129 with special code 32 indicating Type I shelf-life classification. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are verified at predefined levels. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals must be approved prior to use. The delivery schedule specifies a 609-day ADO window for the 736-unit order, with FOB origin as the delivery point, and the first article test unit is listed separately with a 90-day ADO timeline. All documentation and requirements referenced in the DLA Master List of Technical and Quality Requirements, including configuration change management and inspection protocols, are binding and incorporated by reference.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

APPLICATOR, DISPOSABLE

Solicitation # SPE2DS-26-T-305Y

The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).

Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

FLASHLIGHT, EYE EXAM

Solicitation # SPE2DS-26-T-306D

The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.

Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-306E

The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

CABLE, INVASIVE BLOOD P

Solicitation # SPE2DS-26-T-306F

The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

FORCEPS, INTESTINAL

Solicitation # SPE2DS-26-T-306S

The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.

Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

SKIN CLOSURE, ADHESI

Solicitation # SPE2DS-26-T-306Y

The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

SANITIZER, HAND

Solicitation # SPE2DS-26-T-305X

The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.

Soap and Other Detergent Manufacturing

POSTED

about 8 hours ago

DEADLINE

MEDICAL SUPPLY SET, OBS

Solicitation # SPE2DS-26-T-306G

The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.

Ground or Treated Mineral and Earth Manufacturing

POSTED

about 8 hours ago

DEADLINE

DRY FIRE MAGAZINE, P

Solicitation # SPE2DS-26-T-306A

The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

TUBING, TRANSDUCER

Solicitation # SPE2DS-26-T-306K

The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

ELECTRODE, ELECTROCARDI

Solicitation # SPE2DS-26-T-306U

The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.

Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

CATHETERIZATION KIT, UR

Solicitation # SPE2DS-26-T-305W

The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE