Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Pneumatic Tire Wheel Rims (NSN 2530-00-198-6277)

Active

Federal

Response Deadline10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of two specialized pneumatic tire wheel rims, specifically Hayes Wheels Intl Inc part number 7520LWDE, for prime contractors supporting Defense Logistics Agency supply contracts. The required items are identified by NSN 2530001986277 and are specified as type LBD wheel rims with lock rings measuring 7.50X20. The contractor must adhere to strict military and federal standards, including packaging and marking requirements per MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA guidelines. Additionally, the provider must ensure full compliance with DFARS 252.223-7001 and 29 CFR 1910.1200 regarding the handling of hazardous materials. The procurement falls under NAICS code 336340.

General Info

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336340 - Motor Vehicle Brake System Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0049.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIM, WHEEL, PNEUMATIC TI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 5

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized wheel rims for prime contractors delivering DLA supply contracts. Provides RIM W/LOCK RING, WHEEL, 7.50X20, TYPE LBD, specifically Hayes Wheels Intl Inc P/N 7520LWDE. Performs packaging and marking per MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements. Complies with DFARS 252.223-7001 and 29 CFR 1910.1200 for hazardous materials. Delivers two units of NSN 2530001986277.

Similar Contracts

Same NAICS industry code

BRAKE, SHOE TYPE

Solicitation # SPE7LX-27-U-0150

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

CAMSHAFT, ACTUATING, BRA

Solicitation # SPE7L1-27-T-0369

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PLUNGER ACTUATOR ASSEM

Solicitation # SPE7L3-27-T-0155

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L3-26-U-0769

Solicitation SPE7L3-26-U-0769 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of brake drums, specifically Holden Industries, Inc. 7M245 P/N 009-028-01 (NSN 2530-01-508-0873). This is a Women-Owned Small Business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD. The estimated requirement is for 54 units, with a delivery schedule of 75 days after the order is placed. Shipping is designated as FOB Origin, while both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking and labeling. Packaging must comply with RP001 and ASTM D3951, with specific requirements for hazardous materials under FED-STD-313 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Disc Brake Calipers (NSN 2530016861977)This subcontract involves the procurement and delivery of up to 45 specialized disc brake calipers, specifically NSN 2530016861977, for prime contractors supporting LSO Combat Vehicles and Armament projects under the Department of Defense. Because these components are designated as Critical Application Items essential for vehicle safety, the supplier must adhere to strict quality control standards and maintain an active SAM registration. The contract requires the delivery of the specified Detroit Defense units within a 75 day timeframe. Interested parties must respond by October 20, 2026, ensuring all technical specifications for the critical components are met to support the operational safety of the combat vehicles.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

BRAKE BOOSTER ASSEMBLY

Solicitation # SPE7L3-26-T-275X

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Brake Shoe Set Manufacturer/SupplierThis subcontract involves the manufacture and supply of one Brake Shoe Set, identified by NSN 2530-01-534-3701, for prime contractors supporting Department of Defense supply contracts. The supplier is responsible for sourcing or producing the part using steel housings and friction materials, ensuring strict adherence to the DLA Master List of Technical and Quality Requirements and all associated technical data. The project is managed under the Land Supplier Opns Vehicle Spt agency with a place of performance located in Seaford. Interested parties must respond by October 13, 2026, regarding this requirement categorized under NAICS code 336340.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of 3-Wheel Drum Trucks (NSN 3920004910351)This subcontract involves the manufacture and supply of seven 3-wheel drum trucks, identified by NSN 3920004910351, for prime contractors supporting Department of Defense DLA Troop Support equipment contracts. The project requires the fabrication and assembly of units in strict accordance with TDP Rev A Gen 1 and Basic Drawing NR 98750 34J2630, ensuring all tooling and materials meet these specific technical requirements. Additionally, the contractor must apply all identification markings in compliance with MIL-STD-130N. The work is categorized under NAICS code 336340 and is to be performed in Texarkana, Texas. The solicitation was posted on October 1, 2026, with a response deadline of October 13, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

COVER, BRAKE, STEERING

Solicitation # SPE7L1-26-T-18Y4

Solicitation SPE7L1-26-T-18Y4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 10 steering brake covers, identified by NSN 2530015050936. The requirement is categorized under NAICS code 336340. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 13, 2026. The delivery lead time is specified as 20 days after order, with an original required delivery date of September 24, 2026, shipping to Ellsworth Air Force Base, South Dakota. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Inspection and acceptance will occur at the destination per FAR 52.246-2. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and various DFARS clauses regarding cybersecurity and the prohibition of certain foreign military company acquisitions.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-0011

Solicitation SPE7L3-27-T-0011 is a request for quotation issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of one brake shoe set, NSN 2530-01-534-3701, part number TDA A23 3222D2006 from Daimler Truck North America LLC. The requirement is issued under the First Destination Transportation program with delivery terms set as FOB Origin and a required delivery date of September 28, 2026. Inspection and acceptance will occur at the destination in Seaford, Delaware. The contractor must adhere to strict packaging and marking standards, utilizing MIL-STD-129 for labeling and following DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951. Hazardous materials must be packaged per TQ requirement IP025 and FED-STD-313, while non-hazardous items follow commercial packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons. All quotes must be submitted via the DLA Internet Bid Board System.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0003

Solicitation SPE8EF-27-T-0003 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of seven 3-wheel drum trucks, identified by NSN 3920004910351. The items must be manufactured in accordance with TDP Rev A Gen 1 and Basic Drawing NR 98750 34J2630. Delivery is required by April 14, 2027, with a need ship date of March 28, 2027, shipped FOB Destination to DLA Distribution Red River in Texarkana, Texas. Inspection and acceptance will also take place at the destination. The contract mandates strict adherence to technical and quality requirements, specifically citing MIL-STD-130N for property identification and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001, though the DLA Master List of Technical and Quality Requirements takes precedence. Offerors must comply with the Buy American Act and the Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Notably, items produced via additive manufacturing are ineligible for award unless specifically authorized. Payment will be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

VALVE, RELAY, AIR PRESSU

Solicitation # SPE7L3-27-T-0029

Solicitation SPE7L3-27-T-0029 is a fixed-price request for quotation issued by the Department of Defense, specifically DLA Land and Maritime, Land Supplier Ops Vehicle Spt, for the procurement of one air pressure relay valve. The item is identified by NSN 2530-01-497-7185 and part number S4721950330 from Meritor Heavy Vehicle Systems, LLC. Delivery is required within 10 days after order, with an original required delivery date of September 28, 2026, shipped FOB Origin to the 0277 CS BN CO A Distribution at Wheeler Sack Army Airfield, Fort Drum, New York. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 336340 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on hexavalent chromium.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized palletization and shipping for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the delivery of a palletized, marked, and shipped valve to a bulk break point in Worcester, Massachusetts. All services must be executed using the fastest traceable means of delivery to ensure timely arrival. Strict adherence to military standards is mandatory, specifically requiring palletization per RP001, packaging and specialized cushioning and wrap per MIL-STD-2073-1E, and marking per MIL-STD-129. The opportunity is categorized under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Supply of System Pressure Regulating ValveThis subcontract involves the procurement of one System Pressure Regulating Valve, identified by NSN 4820-01-373-5688, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The selected provider is responsible for manufacturing or sourcing the valve in strict accordance with Critical Application Item quality standards to ensure operational reliability. The contract requires full compliance with safety and hazard communication regulations, including the provision of Material Safety Data Sheets and hazard warning labels as mandated by FAR 52.223-3, DFARS 252.223-7001, and Hazard Communication Standard 29 CFR 1910.1200. Performance for this requirement is centered in Worcester, Massachusetts, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of NSN 1005015521175This subcontract involves the procurement of hardware component NSN 1005015521175 for prime contractors supporting the Defense Logistics Agency Weapons Support. The selected provider is responsible for manufacturing or sourcing the item in strict accordance with all associated technical specifications. Performance takes place at Picatinny Arsenal, and the contractor must adhere to a rigorous 20-day timeline for packaging and delivery. The agreement requires compliance with 29 CFR 1910.1200 for the labeling of any applicable hazardous materials. This opportunity is categorized under NAICS code 332994 and was posted by the Department of Defense. Interested parties must have submitted their responses by the deadline of October 19, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 20 hours ago

DEADLINE

Fabrication of Housing and Sleeve AssembliesThis subcontract involves the fabrication of five outer housing and sleeve assemblies for prime contractors supporting critical application projects for the Defense Logistics Agency. The scope of work requires the use of large-bore CNC machines and honing equipment to perform precise boring, honing, and finishing of specialized metal housings to ensure a proper fit for internal components. All deliverables must strictly adhere to Woodward HRT design specifications and meet ESA inspection standards. The opportunity was posted on October 6, 2026, with a response deadline of October 19, 2026, falling under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Precision Machining of Spools, Nozzles, and Locating PinsThis subcontract opportunity with the Defense Logistics Agency involves the high-precision machining of spools, nozzles, and locating pins for critical application projects. The selected contractor will be responsible for the turning, grinding, and finishing of high-grade alloys using CNC lathes and precision grinders to meet strict tolerances, ultimately delivering machined components for final assembly. To be eligible, contractors must maintain ISO 9001 or AS9100 quality management systems. The project falls under NAICS code 332710 and was posted on October 6, 2026, with a response deadline of October 19, 2026.

POSTED

about 20 hours ago

DEADLINE

Supply of Housing, Spool and Pin Assembly (P/N 28002434–02002)This subcontract involves the procurement and delivery of five complete Housing, Spool and Pin Assemblies, specifically Woodward HRT Inc part number 28002434–02002, to support prime contractors fulfilling Defense Logistics Agency supply contracts. Each assembly must include the housing and sleeve assembly, locating pin, nozzles, spool, and chamber plugs. To ensure quality and compatibility, all components must be original equipment manufacturer parts or an approved equivalent. The contract requires strict adherence to military standards, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. Managed under NAICS code 423830 for the Department of Defense, the solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Polyurethane Coating Supplier (MIL-PRF-85285F)This subcontract involves the supply of specialized polyurethane coating for prime contractors supporting the Defense Logistics Agency. The supplier is responsible for manufacturing or sourcing coating that strictly conforms to MIL-PRF-85285F Revision F and part number M85285-2H-001P-36320, specifically for NSN 8010012930780. All hazardous materials must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200, and the provider must supply both MFG. CAGE and SOURCE CAGE codes for all Qualified Products List items. The performance of this contract is centered in China Lake, California. Interested parties must adhere to the timeline established by the Department of Defense, with a response deadline set for October 13, 2026. The procurement falls under NAICS code 325510, focusing on the delivery of properly packaged and labeled coating materials to meet military specifications.

Paint and Coating Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Depth Gage RuleThis subcontract involves the procurement and delivery of one precision depth gage rule, specifically NSN 5210-01-602-6297, to support prime contractors for Defense Logistics Agency Troop Support Construction and Equipment contracts. The supplier must ensure the tool meets the DLA Master List of Technical and Quality Requirements and provide standard commercial quality certifications for precision measurement tools. The contract requires strict adherence to specified packaging and delivery schedules, with the final product delivered to a designated DLA facility located at FPO 96310-7305. This requirement falls under NAICS code 423850 and is managed by the Department of Defense.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valve (NSN 4810016927160)This subcontract involves the procurement or manufacture of one fluid pressure regulating valve, identified by NSN 4810016927160, for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the production, packaging, and labeling of the unit, as well as the provision of Safety Data Sheets in compliance with 29 CFR 1910.1200 and Federal Standard No. 313. Logistics for the contract are managed under the First Destination Transportation program, with the place of performance located in Broken Arrow, Oklahoma. The opportunity is categorized under NAICS code 332911 and is associated with the Department of Defense. Interested parties must adhere to the response deadline of October 19, 2026.

Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690-01-668-5478)This subcontract through the Defense Logistics Agency involves the procurement of identification markers specifically meeting NSN 7690-01-668-5478 specifications for prime contractors. The selected provider is responsible for sourcing or manufacturing the markers and ensuring that all packaging and marking adhere to MIL-STD-129. Additionally, any hazardous materials must be labeled in strict accordance with the Hazard Communication Standard under 29 CFR 1910.1200. The contract falls under NAICS code 323111 and requires the delivery of the specified identification marker units to a performance location in FPO 09534. Interested parties must submit their responses by October 19, 2026, following the posting date of October 6, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 20 hours ago

DEADLINE

Precision Thread Plug Gage SupplyThis subcontract involves the supply of a precision Thread Plug Gage, identified by NSN 5220005664048, to support prime contractors fulfilling Defense Logistics Agency Troop Support contracts for the Naval Undersea Warfare Center Division Keyport. The selected provider is responsible for delivering the physical gage to the specified destination in Keyport, Washington, ensuring all items are packaged according to ASTM D3951 and marked and labeled in strict accordance with MIL-STD-129. Managed by the Department of Defense under NAICS code 333999, the procurement process began with a posting date of October 6, 2026, and a response deadline of October 19, 2026. The contract emphasizes adherence to military packaging and labeling standards to ensure the precision equipment is delivered securely and correctly to the end user.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Circular Saw Blade Supplier (NSN 3455013089395)This subcontract involves the supply of circular saw blades for prime contractors delivering to the Defense Logistics Agency under the Department of Defense. The specific requirement is for item NSN 3455013089395, identified as Delta Intl Machinery Corp part number 35-599. Performance for this contract takes place in East Granby, Connecticut, under NAICS code 332216. The supplier is responsible for delivering one circular saw blade that must be packaged and labeled according to MIL-STD-129 specifications. Additionally, the contractor must perform palletization in accordance with RP001 and ensure all shipments are sent via traceable means. The response deadline for this opportunity is October 19, 2026.

Saw Blade and Handtool Manufacturing

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS