Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of POWER ROCK Fiber Laser (or Equivalent)

Active

Federal

Response Deadline09/30/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract with the Naval Research Laboratory involves the procurement of one high-precision fiber laser for use by prime contractors. The supplier must be an OEM, authorized dealer, or reseller with an active SAM registration. The equipment must meet specific technical requirements, including a CW output power greater than 0.5W, single frequency operation, 30 GHz wavelength stability, and PM fiber output, though it is to be delivered without power supplies or a heat sink. The contract requires the delivery of one physical unit accompanied by a manufacturer warranty. Performance will take place in Washington, DC. Interested parties must respond by September 30, 2026, under NAICS code 334516.

General Info

Small business subcontract for one high-precision fiber laser for Naval Research Laboratory.

Agency

Department Of Defense → Naval Research LaboratoryView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

SBA

Documents

This scope was carved out of N00173-26-Q-1301392209.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Power Rock Fiber Lasers

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Research Laboratory

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Research Laboratory

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one high-precision Fiber Laser for prime contractors on Naval Research Laboratory projects. Sources the equipment as an OEM, authorized dealer, or reseller. Ensures the unit meets specifications for CW Output Power > 0.5W, single frequency operation, 30 GHz wavelength stability, and PM Fiber Output, delivered without a heat sink or power supplies. Requires manufacturer warranty and active SAM registration. Delivers one physical Fiber Laser unit.

Similar Contracts

Same NAICS industry code

Supply of Motional Pickup TransducerThis subcontract with the Department of Defense ASC Commodities Division involves the supply of one Motional Pickup Transducer, identified by NSN 6695-01-640-9939. The provider must ensure the item is either new or reconditioned and strictly adhere to RP001 packaging requirements for procurement. The final delivery must include a packaged and labeled transducer with complete CAGE code traceability. The contract requires strict compliance with ITAR or EAR export controls and DFARS 252.225-7048 regulations. Falling under NAICS code 334516, the opportunity was posted on September 23, 2026, with a response deadline of September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Portable Vector Network Analyzer (VNA)This subcontract is for the supply of one portable Vector Network Analyzer for prime contractors working on Brookhaven National Laboratory projects in Upton, New York. The required device, identified as Provision Item SHN914A, must operate within a frequency range of 30 kHz to 14 GHz. The supplier must maintain ISO 9001 quality system certification and adhere to FAR 52.204-21 cybersecurity standards. Additionally, the hardware must not be sourced from Kaspersky Lab or any other prohibited entities. The solicitation was posted on September 23, 2026, with a response deadline of October 14, 2026.

Brookhaven National Labor -Doe Contractor

POSTED

about 15 hours ago

DEADLINE

Gas Analyzer Equipment SupplierThis subcontract opportunity is for a supplier to provide specialized gas analyzers to prime contractors supporting NOAA scientific equipment procurements. The selected provider will be responsible for manufacturing or sourcing equipment that adheres to the technical specifications outlined in the contract, while ensuring full compliance with sustainable product requirements and Buy American-Supplies regulations. The contract is designated as a total Small Business Set Aside under NAICS code 334516 for the Department of Commerce. Performance will take place in Riverdale, and the supplier is required to provide comprehensive technical specifications for all quoted products and deliver completed units.

Department Of Commerce Noaa

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

(1 ) Methane and Ethane Gas Analyzer and, one (1) Formaldehyde Gas Analyzer.

Solicitation # 145022-26-0013

Solicitation 145022-26-0013 is a combined synopsis and request for quotation issued by the Department of Commerce for the National Oceanic and Atmospheric Administration. The government is seeking to acquire two high-performance, research-grade gas analyzers: one Aeris MIRA Strato Plus Methane and Ethane Gas Analyzer for use on a research UAS, and one Aeris MIRA Ultra Rackmount Formaldehyde Gas Analyzer. These instruments must utilize Mid-infrared Absorption technology to provide high-resolution, parts-per-billion measurement capabilities for atmospheric monitoring under laboratory, mobile, and airborne conditions. Key technical requirements include a compact optical component size, power consumption under 25W at steady state, and seamless integration with Nafion dryers and flow control systems. This acquisition is a total set-aside for small business concerns under NAICS code 334516. The government intends to award a brand-name or equal, firm-fixed-price purchase order based on a best-value tradeoff process, where non-price technical factors are significantly more important than price. All offered products must be new and comply with Buy American requirements. Delivery is required FOB Destination to College Park, Maryland, within 90 days of award, with a final delivery deadline of December 24, 2026, and a place of acceptance in Boulder, Colorado. Quotes must be submitted electronically to the point of contact by 4:00pm on September 24, 2026.

Department Of Commerce Noaa

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

Power Rock Fiber Lasers

Solicitation # N00173-26-Q-1301392209

The Naval Research Laboratory is soliciting quotations for the procurement of one POWER ROCK Fiber Laser, part number RFLPX-0.5-3-1078.98-1-S-S-0-S-0, or an equivalent brand name item. This is a total small business set-aside under NAICS code 334516 and PSC 6640, utilizing a firm-fixed-price contract structure. The required equipment must be new, covered by a manufacturer warranty, and provided by an original equipment manufacturer or an authorized dealer, distributor, or reseller. Technical specifications for the laser include a CW output power greater than 0.5W, single frequency operation, piezo wavelength tuning of +/- 150 MHz, and internal output optical isolation of at least 30dB. The unit must not include a heat sink or power supplies. The government will award the contract to the responsible offeror based on the lowest price technically acceptable criteria. Interested parties must submit a technical and price quote via email to the designated purchasing agent, including their DUNS number and Cage Code. All submissions must include a statement confirming acceptance of the solicitation terms and conditions. The delivery location is the U.S. Naval Research Laboratory in Washington, DC. Offerors must maintain active registration in the System for Award Management database to be eligible for award.

Naval Research Laboratory

POSTED

about 15 hours ago

DEADLINE

Vector Network Analyzer (No Substitutes)

Solicitation # AB483866

Brookhaven National Laboratory, through Brookhaven Science Associates, is soliciting quotations for a Firm Fixed Price purchase order to procure one portable Vector Network Analyzer (SHN914A) with a range of 30 kHz to 14 GHz and one 18 GHz N M&F calibration kit (F505TS). The solicitation requires the country of origin, Unique Entity Identifier, and any available published price lists. Pricing must remain valid for at least sixty days from the quotation due date. Shipping is designated as FOB Destination, with a preference for UPS Ground. For items under 150 lbs, international shipping via the buyer's FedEx account is permitted; otherwise, pricing must be all-inclusive of freight, tariffs, and handling, as the final purchase order will not include separate line items for these charges. The contract incorporates BSA General Terms and Conditions Revision 25.0 and BNL-QA-101 quality assurance requirements, including adherence to ISO 9001 standards and strict packaging guidelines for electrostatic discharge sensitive materials. Invoices should be submitted electronically in PDF format to the specified accounts payable email.

Brookhaven National Labor -Doe Contractor

POSTED

about 15 hours ago

DEADLINE

Notice of Intent to Sole Source - Automated Chambers for Soil Flux Measurements

Solicitation # 1173740

The U.S. Department of Agriculture, specifically the Food and Nutrition Service, intends to award a sole-source contract for Automated Chambers for Soil Flux Measurements under solicitation number 1173740. This procurement is being conducted in accordance with FAR Subpart 6.302-1 and AGAR Part 406, as the government has determined that only one source can meet the necessary technical requirements. The work is intended to be performed in Minnesota. This notice serves as a public announcement to ensure transparency and allow interested parties to submit capability statements. These statements will be evaluated to determine if a competitive procurement is appropriate. The deadline for responses is September 25, 2026. If no capable sources are identified, the USDA will proceed with the sole-source award.

Food And Nutrition Service

POSTED

about 15 hours ago

DEADLINE

DataPhysics Dynamic Contact Angle Measuring Device Tensiometer (DCAT 25)

Solicitation # 75D30126Q79273

Solicitation 75D30126Q79273 is a sole-source acquisition by the CDC Office of Acquisition Services to procure one high-precision DataPhysics DCAT 25 Multifunctional Force Tensiometer system or equivalent. The equipment, which includes integrated analytical software, peripheral measurement apparatus, and automated liquid dosing modules, will be utilized by the NIOSH Pittsburgh Mining Research Division for occupational health and safety research involving surface and interfacial tension, contact angles, and adhesion. The contract is structured as a Firm-Fixed-Price purchase order and includes requirements for the contractor to provide packaging, transport, delivery, on-site technical start-up, system verification, and user training at the facility in Pittsburgh, Pennsylvania. The government intends to award the contract to DataPhysics Instruments USA Corp (also referenced as MTS Systems Corporation) based on the determination that only one responsible source can satisfy the requirements. Delivery is required within 120 days after receipt of order. Offerors must be registered in the System for Award Management and submit a signed quotation by September 25, 2026. Key compliance requirements include adherence to HHS Section 508 accessibility standards and the submission of an AI Compliance and Risk Management Plan if artificial intelligence is utilized in contract performance. Payment will be processed via the Invoice Processing Platform and electronic funds transfer.

CDC Office Of Acquisition Services

POSTED

about 15 hours ago

DEADLINE

Purification Water System

Solicitation # 6-B139-Q-00453-00

Solicitation 6-B139-Q-00453-00 is for the procurement of a Purification Water System for the Argonne National Laboratory in Lemont, Illinois. The system must be capable of supplying high purity deionized water at 18.2 mega ohms for extended periods and must include a remote dispenser, country box IQ 7000 US, 2m system-POD connector, polishing kit, 0.22um filter, and a water sensor. A critical requirement of this solicitation is the provision of installation services; bids that do not include installation will be considered incomplete. The agency mandates a domestic source with a U.S. country of origin, requiring that both the final product and all raw materials be manufactured and sourced within the United States. Offerors must provide written confirmation and supporting documentation regarding the manufacturing location and raw material origin. The contract is governed by Argonne National Laboratory's standard terms and conditions, incorporating various FAR and DEAR clauses, including the Buy American Act and specific cybersecurity and site safety requirements. Submission of the ANL-70A Pre-Award Representations and Certifications and a valid SAM registration are required for compliance.

Argonne National Labor - DOE Contractor

POSTED

about 15 hours ago

DEADLINE

66--NIMH: Competitive Combined Synopsis/Solicitation f

Solicitation # 75N95B26Q00013

The National Institutes of Health, through the Office of the Director's Office of Acquisitions, is soliciting a firm fixed-price purchase order for one cryostat to support the National Institute of Mental Health. The equipment will be used by the Section on Cellular and Cognitive Neurodevelopment to analyze the molecular and chemical architecture of brain regions. The requirement is issued on a brand name or equal basis, specifying the Leica CM3050 S Cryostat or an equivalent that meets critical technical specifications, including a section thickness range of 0.5 to 300 microns, a cryochamber adjustable from 0 to minus 40 degrees Celsius, and a freezing shelf capable of reaching approximately minus 43 degrees Celsius. The device must be designed for in vitro diagnostic use and include all necessary regulatory certifications and markings. Solicitation number 75N95B26Q00013 is conducted as a streamlined acquisition for commercial items under full and open competition. Award will be based on the best value to the government, evaluating factors such as price, technical capability, past performance, and delivery schedule, with additional consideration given to warranty, lifecycle cost, and maintenance availability. Offerors must be registered in the System for Award Management and provide their Unique Entity Identifier, Taxpayer Identification Number, and business size certification. Delivery is specified as FOB Destination, and the primary point of contact for this procurement is Contract Specialist Brittany May.

National Institutes Of Health Olao

POSTED

about 15 hours ago

DEADLINE

in about 12 hours

Solicitation # N0017326Q5280

The Naval Research Laboratory is soliciting quotations for the procurement of miscellaneous optics and opto-mechanical components to be used in ultrafast pump-probe experiments. This is a brand-name only requirement for equipment from Newport Corp/MKS Instrument, including a delay line power supply, delay line stage and controller, broadband hollow retroreflector, clamping forks, and a phase-locked optical chopper. The procurement is conducted as a total set-aside for HUBZone small businesses under NAICS code 334516 on a firm-fixed-price basis. All items must be new equipment provided by an Original Equipment Manufacturer or an authorized distributor, with a required delivery date on or before September 30, 2026. The solicitation, numbered N0017326Q5280, requires offerors to submit technical and price quotes via email to the primary point of contact, Richard Key, by September 25, 2026. Shipments are to be delivered FOB Destination to the Naval Research Laboratory in Washington, DC. Compliance with MIL-STD-130 and MIL-STD-129 is required for marking and packaging, specifically for items with a unit acquisition cost of 5,000 dollars or more and other designated line items. Payment will be processed electronically through the Wide Area WorkFlow system. Award will be made to the responsible offeror whose proposal is most advantageous to the government, considering price and the brand-name requirement.

Naval Research Laboratory

POSTED

about 15 hours ago

DEADLINE

146607R1 ANALYZER C, TOGAS, WITH FID & TCD, HS-20NX LOOP HEADSPACE

Solicitation # 232164

The Los Angeles Department of Water and Power is soliciting bids for the procurement of an Analyzer C, TOGAS, featuring FID and TCD with an HS-20NX loop headspace. This opportunity is categorized under NAICS code 334516 and will be performed in Los Angeles, California. Interested parties must submit their bids electronically through the electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The solicitation was posted on September 23, 2026, and the deadline for responses is September 28, 2026, at 9:00 PM. Steven Rothhammer serves as the primary point of contact for this requirement.

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Research Laboratory

Same awarding agency

Office Furniture Installation ServicesThis subcontract for Office Furniture Installation Services supports prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The scope of work involves the transport, assembly, and configuration of office furniture, specifically focusing on task chairs, electric desks, and the installation of power infeeds and jumper kits. All work must be executed according to Government-approved floor plans and layout PDFs, with the final delivery of fully assembled furniture in designated rooms. The project is located in Washington, DC 20375, and falls under NAICS code 238990. The contractor is responsible for coordinating all site access through the Government Contracting Officer's Representative. The solicitation was posted on September 23, 2026, with a response deadline of September 29, 2026.

All Other Specialty Trade Contractors

POSTED

about 15 hours ago

DEADLINE

Commercial Office Furniture SupplierThis subcontract opportunity is for a commercial office furniture supplier to provide equipment for prime contractors working on Naval Research Laboratory projects. The scope of work includes the delivery of DN5200 Doni Task Armless Chairs, Genesis Basic Rectangular Electric Height Adjustable Desks, and various power distribution components such as jumper kits and pattern infeeds. All supplied items must adhere to commercial-grade furniture standards. The contract is managed under the Department of Defense for the Naval Research Laboratory, with the place of performance located in Washington, DC. Interested parties must respond by September 29, 2026, under NAICS code 423220.

Home Furnishing Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Fume Hood Face-Velocity and Containment CertificationThis subcontract for the Naval Research Laboratory requires a qualified technician to perform on-site safety testing and certification of installed fume hoods for prime contractors. The scope of work involves conducting face-velocity and containment certification tests using anemometers to ensure an average face velocity of 100 FPM +/- 10% at the standard working sash height, strictly adhering to ASHRAE 110-2016 standards. Deliverables include a formal certification report and a dated certification sticker for each unit. The project is located in Washington, DC, and is designated as a total Small Business Set Aside under NAICS code 541380. Interested parties must respond by September 29, 2026.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Fume Hood Installation and Ducting ContractorThis subcontract opportunity is for a Fume Hood Installation and Ducting Contractor to support prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The selected contractor will be responsible for the physical installation and utility connection of fume hood systems, including mounting base cabinets, installing ducting to the facility exhaust system, and completing all necessary mechanical connections. All work must be performed using standard HVAC and mechanical tools, and the contractor is required to hold valid commercial mechanical contracting licenses. The project is located in Washington, DC, and is designated as a total Small Business Set Aside under NAICS code 238220. The solicitation was posted on September 23, 2026, with a response deadline of September 29, 2026. The primary deliverable is a fully installed and connected fume hood system that meets the technical requirements of the facility.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 15 hours ago

DEADLINE

Mott Manufacturing Fume Hood & Cabinet SupplierThis subcontract opportunity is for the supply of one 72-inch Mott Manufacturing laboratory chemical fume hood system for prime contractors supporting the Naval Research Laboratory. The required equipment includes the fume hood, a matching dished epoxy work surface, and a specialized base cabinet assembly. All equipment must be brand-name new and provided by an original equipment manufacturer, authorized dealer, or reseller. Eligible bidders must provide an Authorized OEM Reseller letter and a full manufacturer's warranty. This procurement is designated as a Total Small Business Set Aside under NAICS code 423450. The place of performance is located in Washington, DC, with a response deadline of September 29, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

100 mm Silicon Carbide (SiC) Substrate SupplyThis subcontract with the Naval Research Laboratory under the Department of Defense involves the supply of high-quality 100 mm diameter Silicon Carbide substrates for semiconductor projects. The scope of work includes the manufacturing and slicing of SiC ingots into wafers, followed by precision polishing and cleaning to ensure the substrates meet specific epitaxial growth requirements. The contractor will utilize specialized SiC crystal growth equipment and precision wafering tools to deliver the final substrates. Performance of the contract is centered in Washington, and the opportunity is categorized under NAICS code 326299.

All Other Rubber Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Gallium Nitride (GaN) Epitaxial Thin Film FabricationThis subcontract involves the epitaxial growth of Gallium Nitride thin film layers for prime contractors supporting Naval Research Laboratory semiconductor projects. The scope of work requires the precision deposition of GaN on 100 mm diameter silicon carbide substrates using high-purity precursors and MOCVD or similar epitaxial growth reactors. All fabrication must strictly adhere to semiconductor industry standards and ISO 9001 quality requirements. The project is managed under the Department of Defense for the Naval Research Laboratory, with performance taking place in Washington. Classified under NAICS code 334413, the contract was posted on September 23, 2026, with a response deadline of October 2, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Custom Grown Single Crystal Diamond (SCD) Substrate SupplierThis subcontract is for the supply of nine custom-grown optical single crystal diamond bulk substrates to support prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The supplier must produce substrates measuring 10.00 x 10.00 x 0.50 mm with a <100> primary orientation and specific custom miscuts of 4, 5, and 6, all finished with a fine mechanical polish. Production requires the use of custom diamond growth chambers utilizing either Chemical Vapor Deposition or High Pressure High Temperature methods. The opportunity is designated as a total small business set-aside under NAICS code 334413. Performance of the contract is centered in Washington, DC. Interested parties were required to respond by September 28, 2026, following the posting date of September 23, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Standard Single Crystal Diamond (SCD) Substrate SupplierThis subcontract opportunity is for the supply of precision-manufactured standard single crystal diamond bulk substrates to support prime contractors on Naval Research Laboratory projects. The selected supplier must deliver three substrates measuring 8.00 x 0.50 mm with a <110> primary orientation, featuring laser-cut edges and a fine mechanical polish to achieve a roughness of less than 1mm Ra. Due to these specifications, the contractor is required to possess precision laser cutting and polishing systems. The contract is designated as a total Small Business Set Aside under NAICS code 334413 for the Department of Defense. Performance will take place in Washington, DC. Interested parties must respond by September 28, 2026, following the posting date of September 23, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Cryogenic System Integration ServicesThe Cryogenic System Integration Services subcontract involves the physical integration and connection of compressor and recirculatory systems for prime contractors supporting Naval Research Laboratory projects in Washington. The scope of work includes installing compressor units, connecting recirculatory lines to existing cryostats, and conducting essential leak testing and thermal performance verification using vacuum pumps, leak detectors, and cryogenic-grade fittings to ensure a fully operational integrated cooling system. This opportunity is categorized under NAICS code 238220 and is managed by the Department of Defense for the Naval Research Laboratory. Interested parties must note the response deadline of September 28, 2026, following the posting date of September 23, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 15 hours ago

DEADLINE

Air-Cooled Compressor and Recirculatory System SupplierThis subcontract involves the supply of a specialized air-cooled compressor and recirculatory system for prime contractors supporting projects at the Naval Research Laboratory under the Department of Defense. The selected provider is responsible for manufacturing or sourcing an air-cooled compressor unit and integrating it with a recirculatory system that meets custom cryostat specifications, including all necessary cryogenic recirculatory plumbing and hardware. The final deliverable is one fully functional air-cooled compressor and recirculatory system to be performed in Washington. This opportunity falls under NAICS code 333911, with a posting date of September 23, 2026, and a response deadline of September 28, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Proprietary Equipment Maintenance & CalibrationThis subcontract involves the specialized service, maintenance, and calibration of proprietary Senseeker test units for prime contractors supporting Naval Research Laboratory projects. The scope of work includes diagnostic testing, hardware repair, software updates, and performance verification to ensure all units meet manufacturer specifications. To be eligible for this work, the provider must hold a formal certification from Senseeker Corp. The project is managed under the Department of Defense for the Naval Research Laboratory and is performed in Washington. Classified under NAICS code 811219, the contract requires the delivery of fully operational and serviced equipment. The solicitation was posted on September 23, 2026, with a response deadline of September 29, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS