Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Precision Metal Components (CLIN 1BRD5)

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the delivery of 84 precision metal components with an absolute requirement for zero-defect quality assurance, ensuring every part meets the highest standards of accuracy, durability, and reliability mandated by federal and military specifications. The work falls under NAICS code 331315, indicating it is part of the forging and stamping industry, and is structured as a subcontract under the ASC Commodities Division of the Department of Defense. All components must be manufactured, inspected, and documented to comply with strict defense supply chain protocols, with no tolerance for nonconformance or deviation from approved technical requirements. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, leaving vendors a limited window to submit proposals that demonstrate not only technical capability but also proven experience in high-stakes defense manufacturing environments. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations under stringent oversight. Bidders must be prepared to provide full traceability, material certifications, and inspection reports to satisfy the uncompromising quality expectations of the Department of Defense, as this contract directly supports critical defense systems and cannot tolerate supply chain disruption or failure.

General Info

Deliver 84 zero-defect precision metal components to DoD specs under strict defense supply chain protocols.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Delivery of 84 precision metal components requiring zero-defect quality assurance and compliance with federal and military standards.

Similar Contracts

Same NAICS industry code

PLATE METAL 4 X 48 X 4

Solicitation # SPEFA5-26-Q-0067

The contract specifies the procurement of plate metal in accordance with MMS-1420, equivalent to AMS4050 Rev K, made from 7050-T7451 aluminum alloy with dimensions of 4 inches by 48 inches by 48 inches. A total of 48 pieces are required under solicitation SPEFA5-26-Q-0067, with a firm fixed price and zero tolerance for quantity variance. All materials must be packed in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA packaging requirements, and shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is Fleet Readiness Center East at Cherry Point, North Carolina, with an acceptance point at destination and a 30-day delivery window from award. A Certificate of Quality Conformance is mandatory, and metal certification data must comply with applicable CDRLs and the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Sampling must meet MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and inspection is performed upon arrival. The item has no shelf life and is identified by NSN 9535-LL-NCA-3083 with a required delivery date of July 23, 2026.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A7-26-T-603G

The contract pertains to the procurement of 8 units of a screw thread insert with part number CA17088 and NSN 5325-01-296-3741, sourced from Alcoa Global Fasteners Inc in Torrance, CA. The solicitation number is SPE4A7-26-T-603G, issued on July 30, 2026, with responses due by August 7, 2026, and delivery required within 229 days after order. The item falls under NAICS code 331315 and is being acquired by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance to occur in Tracy, CA, ZIP 95304-5000. The supplier must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemically defined reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The primary point of contact for the solicitation is Naron Sanderlin, reachable via email and phone provided.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0636

The contract mandates the procurement of aluminum alloy metal sheets measuring 0.016 inches thick, 48 inches wide, and 144 inches long, with exact dimensional compliance required—no test coupons are permitted. Each sheet must be supplied in whole-foot lengths only and accompanied by a Certificate of Quality Compliance, which must be included with every shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions. Markings must be applied via stamping or stenciling, be legible to the unaided eye, waterproof, and noncontaminating; adhesive labels are permitted for smaller bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must conform to MIL-STD-2073-1E and Level A requirements of ASTM B660, with robust four-corner and full-edge protection, and top and bottom coverage using fiberboard or better. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; non-compliant bids are considered exceptions and risk rejection or criminal penalties if deemed unauthorized substitutions. The material must meet ASTM B666/B666M-20 and ASTM B660-23 standards, with technical data referencing specific revisions and CDRL-METALSCERT requirements. Inspection and acceptance occur at destination under firm fixed price terms with zero quantity variance. Delivery is due within 90 days after award, with shipping addressed to DLA Distribution Warner Robins in Georgia. Source inspection waivers apply for QSLD-compliant suppliers, and all marking, packaging, and certification requirements must strictly align with DLA directives, failure of which constitutes grounds for rejection. The unit of issue is the sheet, with a total quantity of 81 sheets required.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A6-26-T-10EL

The contract solicitation SPE4A6-26-T-10EL seeks 47 units of screw thread inserts under NSN 5325-00-417-4797, with delivery required within 20 days after award, targeting a performance end date of July 31, 2026. The item is procured under a military specification and must fully comply with technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E Level B with clean and dry preservation, while marking and labeling follow MIL-STD-129, including mandatory GS1-128 barcode implementation and physical identification of bare items per RQ017. Government identification must be removed from non-accepted supplies per RQ011. The product must meet MIL-DTL-45916C specifications, with hazardous materials subject to 29 CFR 1910.1200 labeling and explicit disclosure prior to award under 252.223-7001, while storage, treatment, and disposal of toxic materials are strictly prohibited under 252.223-7006. The place of performance is BTWZOO, Taiwan Army, Zuoying Ammunition Sub, though FOB terms show a discrepancy between origin and destination references requiring clarification. All offers must be submitted electronically via DIBBS by August 6, 2026, and must include a valid UEI and CAGE code, along with size and socioeconomic status representations via SAM.gov. The contract includes numerous FAR and DFARS clauses related to equal opportunity, trafficking in persons, employment verification, cybersecurity safeguarding of covered defense information, prohibition on covered telecommunications equipment, whistleblower rights, sustainable products, and wage compliance. Inspection and acceptance occur at origin with adherence to MIL-STD-1916 or MIL-STD-105 sampling procedures and SAE AS9003 or ISO 9001 quality systems. Payment will be processed exclusively through WAWF, with invoicing methods depending on contract type, which remains unspecified pending contracting officer insertion. No contract options are identified, and additive manufacturing is prohibited absent prior approval. The estimated value, derived from historical procurement data, is approximately $2,987.90, though actual pricing for this solicitation is

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3736

The contract is for a SEAL KIT, DOOR with NSN 5411015301042, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3736. One thousand units are required, packaged in kits with delivery due within five days of shipment, FOB destination, and no tolerance for quantity variance. The item is classified as a Type I (Code H) shelf-life item with a non-extendable 12-month lifespan, requiring the manufacturer’s date to be marked clearly. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 32 for Type I shelf life, with palletization following DLA’s packaging requirements. Shipping must occur via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Riley, Kansas. The item is subject to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and Covered Defense Information protections apply. The required delivery date is July 24, 2026, with no need ship date specified, and the contract is governed by DoD unit of issue standards.

Defense Logistics Agency

POSTED

DEADLINE

Metal Bar Manufacturing and SupplyThe contract requires the fabrication and supply of one metal bar identified by NSN 9510016109320, manufactured strictly in accordance with military specifications and compliant with Defense Logistics Agency technical and quality standards. The item must meet all required performance, dimensional, and material criteria as dictated by DLA to ensure suitability for defense applications. The solicitation is classified as a subcontract under NAICS code 331315, indicating the scope falls within the primary smelting and refining of nonferrous metals. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, and performance is to be delivered to a FPO address with ZIP code 96306-0001. The contracting entity is the Defense Logistics Agency under the Department of Defense, and while no specific point of contact or set-aside details are provided, all proposals must adhere to the technical and compliance requirements outlined by DLA. Subcontractors are expected to fully understand and meet the rigorous quality assurance protocols mandated for defense-related metal components.

Defense Logistics Agency

POSTED

DEADLINE

Aluminum Sheet Manufacturing and SupplyThe contract calls for the manufacture and supply of 23 aluminum sheets conforming to SAE AMS4268, AMS-QQ-A-250/4B, and ASTM B666 specifications, with a T81 temper condition and full certification required for all delivered material. These sheets must meet rigorous aerospace-grade standards for composition, mechanical properties, and surface quality, ensuring compatibility with high-performance applications in defense systems. The requirement is issued as a subcontract under the NAICS code 331315, indicating a focus on aluminum rolling and extrusion operations. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed under the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform at the provided URL. Full documentation and compliance verification must accompany delivery, and the supplier must demonstrate capability to consistently produce material meeting all listed standards with traceable test reports and certification.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Precision Aluminum Sheet Manufacturing & SupplyThe contract calls for the manufacture and supply of 70 units of Alclad 7075-T6 aluminum sheets adhering strictly to military specifications covering thickness, dimensions, and cladding requirements, ensuring the material meets rigorous performance and durability standards for defense applications. All units must be produced to exact tolerances and certified with appropriate documentation to verify compliance with the required metallurgical and surface properties inherent to the 7075-T6 alloy with alclad coating. The solicitation, issued under the NAICS code 331315 for aluminum rolling, is classified as a subcontract and was posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, though no specific point of contact or place of performance details are provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1932

The contract pertains to the procurement of one unit of BAR, METAL with NSN 9510-01-610-9320 under solicitation SPE8E4-26-T-1932, issued by the Defense Logistics Agency. Delivery is required within five days of contract award, FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by more stringent DLA Technical and Quality Requirements, which take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is designated for delivery to a U.S. military address in FPO AP 96306-0001, with a secondary freight shipping address in Japan, and must be shipped as a RDD 999/NMCS shipment under DLAD PROC NOTES C19 and C20. The required delivery date is January 21, 2026, and the contract incorporates all referenced DLA Master List requirements as of the solicitation issuance date. The technical and quality requirements referenced are binding and sourced exclusively from the DLA Master List of Technical and Quality Requirements available online, with CDRL-METALSCERT and DD Form 1423s applicable for certification and data submission. The unit of issue is each (EA), and the total price is $1.00. Government identification must be removed from non-accepted supplies, and the contract is governed by DoD authorized units of issue. The point of contact is Pamela Duffey of DLA, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026. The NAICS code is 331315, indicating classification under primary metal manufacturing, and the contract is classified as federal procurement without set-aside designation.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3719

The contract is for a SEAL KIT, DOOR with NSN 5411015301009 and part number 16505513, supplied by BOH ENVIRONMENTAL, L.L.C., under solicitation SPE8E5-26-T-3719. One kit is required, delivered in a single unit of issue (KT), with fixed quantity and zero variance allowed. Delivery must be completed within five days, FOB origin, and inspection and acceptance occur at the destination. The item has a non-extendable shelf life of 12 months and is classified as a TYPE I (CODE H) item. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container requirements, and packaging code U, with marking conforming to MIL-STD-129 and no special markings required. Palletization adheres to DLA packaging standards. The shipment must be dispatched via traceable means, excluding parcel post, to the designated government facility at Fort Riley, Kansas, with delivery scheduled for July 24, 2026. Technical and quality requirements are governed by the DLA Master List, and Covered Defense Information potentially applies. The contract includes government-specific identifiers and tracking codes for logistics and accountability purposes.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0627

The contract specifies the procurement of 23 sheets of aluminum alloy metal, each 0.125 inches thick, 36 inches wide, and 144 inches long, weighing 64.80 pounds per sheet, with the NSN 9535-00-684-4551. The material must conform to SAE AMS4268 Revision B, SAE AMS-QQ-A-250/4B, and ASTM B666/B666M-20 standards, with a temper designation of T81. All shipments require a Certificate of Quality Compliance, including mill certification, with a copy provided to the DLA Troop Support Contracting Officer with every delivery. Each sheet must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and exact dimensions using stamping or stenciling that is legible, waterproof, and noncontaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes. Sheets must be supplied in whole foot lengths only. Packaging must comply with ASTM B660-23 Level A and MIL-STD-2073-1E, including robust four-corner and full-edge protection, fiberboard or better top and bottom coverage, and adherence to PREP FOR DELIVERY code ZZ. Markings must also include both units of measure when applicable and conform to MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from the QSLD requirement constitutes an exception that must be clearly stated. Products not sourced through an approved QSLD distributor are considered unauthorized substitutions and may result in criminal penalties. Compliance with the QSL program waives the need for government inspection, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements. The contract mandates firm fixed pricing with no tolerance for quantity variance, delivery within 90 days after order date, and destination point inspection and acceptance. The material will be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, with packaging and transport governed by DLA-specific procedures. The solicitation was issued under SPE8E9-26-Q-0627 with a response deadline

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0630

The contract specifies the procurement of aluminum metal sheets with precise technical and quality requirements, including material specifications of Alclad 7075-T6 with 0.0016 inch cladding on both sides, 0.040 inch thickness, 36 inch width, and 144 inch length, weighing approximately 20.95 pounds per sheet. All sheets must conform exactly to the stated dimensions with no tolerance for test coupons, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full fiberboard coverage top and bottom, and marking in accordance with MIL-STD-129, with dual-unit quantity labeling where applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Non-compliance with QSLD rules constitutes an unauthorized substitution and may trigger criminal penalties. This solicitation waives government inspection requirements for approved QSLD suppliers, relying instead on mill certifications and compliance with referenced standards including SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23. Material must be delivered within 55 days of award, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at destination, with FOB origin terms. Two separate line items total 70 sheets, destined for Tinker AFB, OK and San Diego, CA, with a required ship date of July 9, 2026. All documentation, including Certificates of Quality Compliance and marking details, must align strictly with the referenced Technical Data Package and DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

POSTED

about 14 hours ago

DEADLINE

NUT, PLAIN, EXTENDED

Solicitation # SPE4A6-26-T-09HS

The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-08MV

The contract solicitation SPE4A6-26-T-08MV pertains to the procurement of a sleeve bearing with NSN 3120012860906, Quantity: 4 units, under a fixed-price delivery order. Delivery is required within 171 days after award, with FOB Origin terms, meaning title and risk transfer to the government upon delivery to the carrier at the contractor’s location. The sole approved sources are Kamatics Corporation and Roller Bearing Company of America, with specific part numbers mandated for compliance, and tooling or casting/forging may be required in manufacturing, for which contractors must seek assistance through DLA’s specialized forging and casting support channels if not already equipped. Packaging and preservation must fully comply with MIL-STD-2073-1E, using preservation method 33, clean and dry condition, preservation material 49, and wrapping material EA, with intermediate and unit containers coded E5 and packaging code U. Marking requirements adhere strictly to MIL-STD-129, with no special marking codes applied, and bare item identification must be present per RQ017. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Quality assurance systems must align with SAE AS9003 or ISO 9001 tailored to AS9003. The offeror must hold a valid UEI and CAGE code and represent its small business status if claiming socioeconomic status such as WOSB, EDWOSB, SDVOSB, or HUBZone, and must provide UEIs for all joint venture partners if applicable. Invoicing is exclusively required through WAWF, and electronic submission of proposals is mandatory via DIBBS by the deadline of August 5, 2026. Compliance with multiple DFARS clauses is enforced, including safeguarding covered defense information (252.204-7012), prohibition of hexavalent chromium (252.223-7008), export control (

Support Activities for Coal Mining

POSTED

about 14 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-04MJ

The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-09HR

The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

NUT, PLAIN, SLOTTED, H

Solicitation # SPE4A6-26-T-08RR

The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

PIN, STRAIGHT, THREAD

Solicitation # SPE4A6-26-T-02AQ

The contract is for the procurement of 30 straight threaded pins identified by the NSN 5315-01-424-1861 under solicitation number SPE4A6-26-T-02AQ, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline of July 8, 2026, and is classified as a federal procurement under NAICS code 339993 which pertains to other miscellaneous fabricated metal product manufacturing. The place of performance and specific office address details are not provided, and no set-aside provisions are indicated, meaning the opportunity is open to all eligible contractors. The solicitation is accessible through the DIBBS system for potential vendors seeking to respond to the requirement.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-09KV

The contract solicits ten bushings, sleeves with NSN 3120010145565, sourced exclusively from the approved manufacturer Boeing under CAGE 81205 and part number 66-29042, designated as a critical application item requiring adherence to the Technical Data Package Revision A General 1 per reference QAP 13873 QAP-B02 Revision NR B dated 12/11/2013. Delivery is required within 20 days after award to Prince Sultan Air Base in Al Kharj, Saudi Arabia, under FOB Origin terms, with no variance permitted in quantity. All items must be packaged in accordance with MIL-STD-2073-1E, using QUP 001, preservation method 31, clean/dry condition 1, and no preservation material; packaging level is B with packaging code Q and unit container BL, intermediate container E5, and outer packaging indicator M. Marking must strictly conform to MIL-STD-129 with no special marking code applied, and palletization must meet DLA packaging requirements. Inspection and acceptance occur at origin, contingent upon compliance with FAR 52.246-2 and quality systems aligned with SAE AS9003 or ISO 9001 as tailored to AS9003. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, safety of covered defense information, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, whistleblower rights, subcontracting, and safeguarding government information, including specific compliance with NIST SP 800-171 and DFARS 252.204-7012. Offerors must certify their entity status via Unique Entity ID and CAGE code per DFARS 252.204-7017, disclose any covered defense telecommunications equipment or services, and submit Safety Data Sheets and hazard warning labels for all applicable hazardous materials under 29 CFR 1910.1200 and Federal Standard No. 313, unless exempt under specified federal statutes. Proposals must be submitted electronically via DIBBS by the deadline of July 31, 2026, and all invoicing must follow the WAWF system. The contract does not specify unit prices, total value, or award methodology, and it includes no option quantities

Ball and Roller Bearing Manufacturing

POSTED

about 14 hours ago

DEADLINE