Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Raw Materials for Metallic Seals

Active

Response Deadline09/11/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw metallic alloys for prime contractors supporting NAVSUP and DLA supply contracts. The provider is responsible for sourcing and delivering raw metallic stock that adheres to design reference 9687M55608 and TDP Version 004. To ensure full traceability and quality assurance, the supplier must provide comprehensive mill test reports and material certifications while maintaining strict compliance with Buy American and Buy America requirements. Managed by the Department of the Navy under SPRMM1 DLA Mechanicsburg, the contract falls under NAICS code 423510. The place of performance is located in Mechanicsburg, Pennsylvania. The solicitation was posted on September 4, 2026, with a response deadline of September 11, 2026.

General Info

Supply of raw metallic alloys for NAVSUP and DLA in Mechanicsburg, Pennsylvania.

Agency

Department Of The Navy → SPRMM1 DLA MechanicsburgView Agency

NAICS

423510 - Metal Service Centers and Other Metal Merchant WholesalersView NAICS

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM1-26-Q-HE52.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL,METALLIC,NONAI — 2835014696241 — SPRMM126QHE52

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 4

subcontract

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 08:30:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metallic alloys for prime contractors on NAVSUP/DLA supply contracts. Sources and delivers raw metallic stock meeting design reference 9687M55608 and TDP Version 004. Provides mill test reports and material certifications to ensure traceability. Complies with Buy American/Buy America requirements. Delivers certified raw metallic materials.

Similar Contracts

Same NAICS industry code

Supply of Plain Hexagon Nuts (NSN 5310015422017)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-26-Q-0401

This contract is for the procurement of hot rolled, annealed, and descaled titanium alloy metal sheets measuring 0.020 inches thick, 36 inches wide, and 67 inches long. The requirement is for two units under a firm fixed price agreement, with delivery expected 30 days after order. The material must adhere to specific technical standards, including SAE AMS4911T and AMS4907M, and requires a Certificate of Quality Compliance with every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Strict compliance with marking and packaging requirements is mandatory, including continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Shipments must be delivered to the DD Depot OK center at Tinker AFB, with specific palletization and protection requirements to prevent damage.

Defense Logistics Agency

POSTED

DEADLINE

Various Steel Parts (Bid Discount)

Solicitation # 26-P-00555

Solicitation 26-P-00555, issued by the Florida Solid Waste and Environmental Program Management agency in Tampa, seeks the procurement of various steel parts for a one-year term. These materials are required to support repairs for the McKay Bay Waste to Energy Facility and the Container Shop, specifically for the maintenance of compactors, roll offs, and steel front end load containers. The response deadline for this solicitation is October 2, 2026. The contract is subject to City of Tampa administrative requirements, including the use of the DMI 30 Form Payment Package for subcontractor and supplier payments. Depending on the nature of the deliverables, providers may need to comply with ADA requirements for information and communication technology, the City's Cloud Hosting Policy for any digital services, and OSHA Hazard Communication standards regarding Safety Data Sheets for materials provided. Primary contact for this procurement is Support Services Supervisor Brian Quier.

Solid Waste & Environmental Program Management

POSTED

DEADLINE

MRO (Maintenance, Repair, and Operations) Supplies

FA2860 316 Cons Pk

POSTED

DEADLINE

Portable Lighting and Power Equipment Supply

FA4877 355 Cons Pk

POSTED

DEADLINE

Aluminum Supplies for Kitchen Cooler Repairs at SFCC

Solicitation # BPM093798

The State Farm Correctional Center in Virginia is seeking aluminum supplies required for kitchen cooler repairs under solicitation number QQ-127223. This opportunity is categorized under NAICS code 423510 and is managed by the Virginia state government. Interested vendors must submit their responses by the deadline of September 11, 2026, at 4:00 PM. The place of performance for this contract is located at State Farm, Virginia, and the primary point of contact for inquiries is Chad Etienne.

State Farm Correctional Center

POSTED

DEADLINE

Welding Rod Supplier (NSN 3439000887791)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Apex Fasteners Bit (NSN 6117-01-651-4823)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Concrete Reinforcing and Accessories SupplierThis subcontract, managed by the Department of Defense under the W7NU Uspfo Activity Oh Arng, requires a supplier to provide steel reinforcement and supporting hardware for prime contractors at the Camp James A. Garfield Joint Training Center in Ravenna, Ohio. The scope of work includes the delivery of bulk materials such as number 5 Grade 60 uncoated rebar in 20 foot bars, slab bolsters, concrete bricks, and tie wire. All supplied materials must strictly conform to the Bill of Materials specifications and be delivered within 14 calendar days after receipt of order. The opportunity is designated as a total Small Business Set Aside under NAICS code 423510. Interested parties must respond by September 14, 2026, to be considered for this concrete reinforcing and accessories supply contract.

W7NU Uspfo Activity Oh Arng

POSTED

DEADLINE

Moving Supplies SupplierThis subcontract opportunity, managed by the Department of Defense through W6QM Micc-Ft Belvoir, seeks a supplier to provide packing and labeling materials for prime contractors working on facility projects at Arlington National Cemetery. The selected vendor will be responsible for delivering boxes, bubble wrap, packing tape, and inventory labeling systems directly to the project site in Fort Myer, ensuring all standard vendor compliance requirements are met. The contract is designated as a total Small Business Set Aside under NAICS code 423510. Interested parties must submit their responses by October 8, 2026, following the posting date of September 2, 2026.

W6QM Micc-Ft Belvoir

POSTED

DEADLINE

in about 1 month

1018 Cold Rolled Round Bar SupplyThis subcontract involves the supply and delivery of 201 units of 1018 cold rolled round steel bars for prime contractors working on Department of the Interior BLM projects. Each bar must measure 5/8 inch by 20 feet, adhering to a specific length tolerance of 19 feet 11.75 inches plus or minus 1/16 inch. The materials are to be delivered to the Salmon Field Office Wareyard in Salmon, Idaho. The contract is designated as a total Small Business Set Aside under NAICS code 423510 and is managed by the Oregon State Office. Compliance with the Buy American Act and FAR 52.222-18 regarding child labor is mandatory. The solicitation was posted on September 2, 2026, with a response deadline of September 12, 2026.

Oregon State Office

POSTED

DEADLINE

A36 Structural Steel Tube SupplyThis subcontract, managed by the Department of the Interior Oregon State Office, involves the supply and delivery of A36 structural steel tubing for prime contractors working on Bureau of Land Management projects. The contractor is required to provide 201 units of 2 inch by 2 inch by 3/16 inch by 20 foot tubing, adhering to a length tolerance of plus or minus 1/16 inch. All materials must be delivered to the Salmon Field Office Wareyard in Salmon, Idaho. The opportunity is designated as a total Small Business Set Aside under NAICS code 423510. Compliance with the Buy American Act and FAR 52.222-18 regarding child labor is mandatory. The solicitation was posted on September 2, 2026, with a response deadline of September 12, 2026.

Oregon State Office

POSTED

DEADLINE

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

Manufacture of Metallic Non-Oil Seals (NSN 7HH 2835-01-469-6241)This subcontract involves the manufacture of metallic non-oil seals under NSN 7HH 2835-01-469-6241 for prime contractors supporting NAVSUP and DLA supply contracts. The production process requires the fabrication of seals according to reference number 9687M55608 and TDP Version No. 004, utilizing precision machining equipment to ensure technical compliance. The contractor must adhere to DODISS standards and implement rigorous counterfeit detection and avoidance protocols along with comprehensive supply chain traceability documentation. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the performance of this contract is centered in Mechanicsburg, Pennsylvania, under NAICS code 332710.

POSTED

DEADLINE

Specialized Aerospace Packaging and Marking ServicesThis subcontract for Specialized Aerospace Packaging and Marking Services supports prime contractors on DLA supply contracts by providing comprehensive preservation, packaging, packing, and marking services. The scope of work includes applying DLR labels to units and shipping containers, managing shipment methods to maintain part integrity through specialized containers, and ensuring full compliance with Naval Forms Online labeling standards and DoD PPP&M regulations. The ultimate goal is to deliver shipments that are properly packaged and labeled for government acceptance. The contract is managed by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency, with the place of performance located in Mechanicsburg, Pennsylvania. Classified under NAICS code 423990, the opportunity was posted on September 4, 2026, with a response deadline of September 11, 2026.

Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

DEADLINE

Supply of Air Compressor Vanes (NIIN 002575473)This subcontract involves the manufacture and supply of air compressor vanes, identified by NIIN 002575473, for prime contractors supporting DLA supply contracts. The provider must produce vanes according to exact drawing specifications and deliver the physical components along with quality inspection reports and comprehensive supply chain traceability documentation, including NSN and CAGE codes. The contract is managed by the Department of the Navy under SPRMM1 DLA Mechanicsburg and requires strict adherence to the Counterfeit Detection and Avoidance Program and PPP&M requirements. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 336413, with a response deadline of September 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

VALVE,DIAPHRAGM,STO — 4820012335825 — SPRMM126QMH43

Solicitation # SPRMM1-26-Q-MH43

This contract outlines the requirements for the manufacture and supply of a diaphragm stop valve, specifically identified by Cage Code 86184 and reference number MIL-V-15508TYICLA2.5IPS. The agreement mandates strict adherence to marking standards per MIL-STD-130 and packaging requirements according to MIL-STD 2073. Any changes in design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, with specific coding used to categorize the nature of the substitution. The contractor is responsible for all inspection and quality assurance tasks, though the government reserves the right to perform its own inspections to ensure compliance. All inspection records must be maintained for 365 days following final delivery. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide signed proof of authorization on company letterhead. The contract also emphasizes compliance with Navy distribution statements regarding the safeguarding of technical documents and drawings.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

PARTS KIT,BALL VALV — 4820013455706 — SPRMM126QGF46

Solicitation # SPRMM1-26-Q-GF46

This contract specifies the requirements for the manufacture and supply of a ball valve parts kit for the Department of the Navy. The contractor must adhere to specific design and performance standards outlined in drawing 53711 and cage 6404929, with physical identification following MIL-STD-130. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships, with strict prohibitions against mercury contamination during manufacture. Quality assurance is governed by MIL-I-45208 or ISO 9001 standards, and the contractor is responsible for all inspections and maintaining records for four years post-delivery. Any changes to design, materials, or part numbers require written approval from the Contracting Officer, unless they meet specific minor change criteria. Packaging and preservation must comply with MIL-STD 2073, and only authorized distributors of the original manufacturer are eligible for award consideration.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

PUMP,ROTARY — 4320011513025 — SPRMM126QMG51

Solicitation # SPRMM1-26-Q-MG51

This contract outlines the requirements for the manufacture and supply of a rotary pump, specifically identified by Cage Code 07524 and reference number E-4328/BXL2-1/2NFCM1. The contractor must adhere to MIL-STD-130 for physical marking and MIL-STD 2073 for preservation, packaging, and packing. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes where the items remain identical. The contractor is responsible for all inspection and quality assurance compliance, and must maintain inspection records for 365 days following final delivery. The government retains the right to perform its own inspections to ensure conformity. Additionally, the contract specifies that only authorized distributors of the original manufacturer will be considered for award, and they must provide signed proof of authorization on company letterhead.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

SIGNAL,CONDITIONER — 2835014833645 — SPRMM126QKH91

Solicitation # SPRMM1-26-Q-KH91

This contract outlines the requirements for the manufacture and supply of a signal conditioner for the Department of the Navy. The contractor must adhere to specific design standards identified by Cage Codes 07482 and 95411 and ensure all items are physically identified according to MIL-STD-130. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update where the items remain identical. The contractor is responsible for all inspection and quality assurance tasks, maintaining records for 365 days following final delivery. Packaging and preservation must comply with MIL-STD 2073. Additionally, the contract specifies that only authorized distributors of the original manufacturer will be considered for the award, and they must provide proof of authorization on company letterhead.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 1 month

RESTRICTOR VALVE AY — 4820015881727 — SPRMM126QKH76

Solicitation # SPRMM1-26-Q-KH76

This contract specifies the requirements for the manufacture and quality assurance of the Restrictor Valve AY, identified by Cage Code 78062 and reference number 21847-001. The contractor must adhere to MIL-STD-130 for marking and MIL-STD 2073 for packaging. A critical requirement is that the materials must be entirely free from metallic mercury and mercury contamination, as the items are intended for use on submarines and surface ships. Any deviation or necessary use of mercury requires prior written approval from the Procurement Contracting Officer and the inclusion of a warning plate. The contractor is responsible for all inspections and must maintain quality records for 365 days following final delivery. Design or material substitutions are prohibited without a written change order from the NAVICP-MECH Contracting Officer, except for simple part number changes. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided technical documents are subject to specific distribution statements to control the safeguarding of information.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

SEAL,METALLIC,NONAI — 2835014696241 — SPRMM126QHE52

Solicitation # SPRMM1-26-Q-HE52

This contract outlines the requirements for the manufacture and supply of a non-aluminum metallic seal, identified by Cage Code 07482 and reference number 9687M55G08. The contractor must adhere to MIL-STD-130 for physical identification and MIL-STD 2073 for packaging and preservation. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update under Code 1. The contractor is responsible for all inspection and quality assurance compliance, with the requirement to maintain inspection records for 365 days following final delivery. The government reserves the right to perform independent inspections to ensure conformity. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All technical documents and drawings are subject to specific distribution statements in accordance with OPNAVINST 5510.1.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

VALVE,BUTTERFLY — 4820014995534 — SPRMM126QMG90

Solicitation # SPRMM1-26-Q-MG90

This contract outlines the requirements for the manufacture and supply of a butterfly valve, specifically identifying the design associated with Cage Code 35795 and reference number YCL76260. The contractor is responsible for ensuring the item is physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update where the items remain identical. The contractor maintains full responsibility for inspection and quality assurance, with the requirement to keep all inspection records for 365 days following final delivery. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. The agreement also specifies strict adherence to distribution statements for Navy documents and provides detailed guidance on obtaining necessary technical specifications and standards through the Department of Defense Single Stock Point and other designated authorities.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

VANE,COMPRESSOR,AIR — 2840002575473 — SPRMM126QHE05

Solicitation # SPRMM1-26-Q-HE05

This contract specifies the requirements for the manufacture and quality assurance of an air compressor vane, identified by Cage Code 07482 and reference number K109G01. The contractor must adhere to MIL-STD-130 for physical marking and MIL-STD 2073 for packaging. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes where the items remain identical. The contractor is responsible for all inspection and compliance requirements, with the government reserving the right to perform independent inspections. Inspection records must be maintained for 365 days following final delivery. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided technical documents are subject to specific distribution statements governing the safeguarding of information.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

RELAY ASSEMBLY — 5945014402065 — SPRMM126QKH98

Solicitation # SPRRM1-26-Q-KH98

This contract establishes the requirements for the manufacture and quality assurance of a relay assembly. The contractor must adhere to a comprehensive list of drawing data and technical specifications, ensuring that the final product matches the design associated with the specified cage codes. Physical identification of the items must comply with MIL-STD-130, and packaging must follow MIL-STD 2073. The contractor is responsible for all inspection and quality compliance, maintaining detailed records for 365 days following final delivery. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. Additionally, only authorized distributors of the original manufacturer are eligible for award, and they must provide signed proof of authorization on company letterhead.

Relay and Industrial Control Manufacturing

POSTED

DEADLINE

in about 1 month