Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Raw Metal Stock for Drum Fabrication

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw metal sheets or coils to prime contractors supporting DLA Troop Support supply contracts. The provider is responsible for sourcing and delivering metal stock that adheres to the specific gauge and material requirements for NSN 8110-01-467-0892, ensuring all deliveries are sent to the designated fabrication facility in New Cumberland, Pennsylvania. To maintain compliance with federal procurement standards for metal containers, the supplier must provide comprehensive Mill Test Reports and material certifications. This requirement is managed under NAICS code 423510 for the Department of Defense, with a response deadline of September 28, 2026.

General Info

Supply raw metal sheets for NSN 8110-01-467-0892 to New Cumberland, PA by 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

423510 - Metal Service Centers and Other Metal Merchant WholesalersView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8ED-26-T-1413.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DRUM, SHIPPING AND STOR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal sheets or coils for prime contractors delivering DLA Troop Support supply contracts. Sources and delivers metal stock meeting the gauge and material specifications for NSN 8110-01-467-0892. Provides Mill Test Reports and material certifications to ensure compliance with federal procurement standards for metal containers. Delivers raw metal stock to the fabrication facility.

Similar Contracts

Same NAICS industry code

Supply of White Lithium Grease (Aerosol)This subcontract involves the supply and delivery of 36 units of 10 oz. aerosol cans of white lithium grease to the Nashville Electric Service in Nashville. The contractor must provide the specific approved manufacturer part Lubri L0034-063, as alternate brands are strictly prohibited. The solicitation was posted on September 16, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 423510 and is intended for prime contractors to facilitate the delivery of the specified lubricant to the designated facility.

Nashville Electric Service

POSTED

about 21 hours ago

DEADLINE

Raw Material Supply for FastenersThis subcontract, managed by the ASC Commodities Division of the Department of Defense, involves the supply of raw metal stock such as wire, strip, and bar for prime contractors fulfilling DLA supply contracts. The selected provider must source metal alloys that adhere to DLA Master List R or I requirements and ensure full traceability and compliance by providing Mill Test Reports for all certified raw metal stock delivered. The opportunity is categorized under NAICS code 423510 and is designated for performance at Hill AFB in Utah. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Metal/Alloy SupplyThis subcontract for Specialized Metal/Alloy Supply involves the sourcing and delivery of certified raw aerospace-grade alloys and metal stock to support prime contractors fulfilling DLA Aviation ASC Commodities Division requirements. The provider is responsible for ensuring all materials meet strict military and aerospace standards, which includes the provision of Mill Test Reports to verify compliance. The contract is managed by the Department of Defense under NAICS code 423510, with performance taking place in New Cumberland. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Material SupplierThe Specialized Material Supplier subcontract, managed by the Department of Defense Land Supply Chain, involves the provision of aerospace and defense-grade alloys and polymers to prime contractors. These materials must strictly adhere to DLA Master List R or I specifications and be certified free of prohibited substances, such as Hexavalent Chromium. To ensure quality and compliance, the supplier is required to provide Mill Test Reports for all delivered raw materials. This opportunity is categorized under NAICS code 423510 and is based in Portsmouth, Maine. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026. Interested parties can find further details through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Specialized Metallic Stock for Plug FabricationThis subcontract involves the supply of specialized raw metallic stock for plug fabrication to support prime contractors delivering DLA supply contracts. The provider is responsible for sourcing and delivering certified aerospace or industrial grade metal alloys that meet the specific material requirements associated with NSN 1650000317452. To ensure full compliance with DLA technical standards, the supplier must provide Mill Test Reports alongside the certified materials. Managed by the ASC Supplier Oper AE and AF Div within the Department of Defense, the contract falls under NAICS code 423510. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Steel Flat Bar Supplier (UNS K02600)This subcontract involves the supply of 612 units of hot-rolled steel flat bars, specifically STEEL UNS K02600, for prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The required materials must have dimensions of 1.000 inch thickness by 2.000 inch width and be provided in whole foot lengths of 10, 11, or 12 feet. Each shipment must be accompanied by a Certificate of Quality Compliance or Mill-Material Certification to ensure quality standards. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The solicitation is categorized under NAICS code 423510, with a response deadline set for September 28, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Cold Rolled/Drawn Steel Flat Bars (1018 Steel)This subcontract involves the supply of 408 units of cold rolled or drawn 1018 steel flat bars to support prime contractors for DLA Troop Support Construction and Equipment contracts. The required materials must feature square edges and flat profiles with dimensions of 0.375 inches in thickness, 1.000 inch in width, and lengths between 10 and 12 feet. The supplier is responsible for the waterproof stamping or stenciling of heat, lot, and contract numbers on each bar. All materials are to be delivered to the Department of Defense DDSP New Cumberland facility in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Raw Material Supply for MS51552A FastenersThis subcontract, managed by the ASC Commodities Division of the Department of Defense, involves the sourcing and delivery of certified aerospace-grade alloys, metal bars, and wire. The materials must strictly adhere to the chemical and physical properties defined in specification MS51552A and are intended for prime contractors fulfilling DLA supply contracts. To ensure quality and compliance, the supplier is required to provide Mill Test Reports for all delivered raw material stock. The contract is categorized under NAICS code 423510 and specifies the place of performance in Tracy, California. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026. The primary objective is to ensure the manufacturer receives certified raw materials that meet all necessary aerospace standards for fastener production.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of SPOOLARC 82 Welding ElectrodesThis subcontract, issued by the Department of Defense for the Navsup Flt Logistics Ctr Puget Sound, involves the supply of specialized MIG welding electrodes for prime contractors. The requirement consists of 15 spools of 0.035 inch diameter steel SPOOLARC 82 wire, each weighing 35 pounds. All materials must strictly adhere to MIL-E-23765/1, MIL-TYPE 70S-3, and QPL-23765-52 specifications. The contractor is required to provide MIL-SPEC certification sheets for the delivery and ensure all items are labeled as NON LEVEL 1 AND NON NSN. This opportunity is designated as a Total Small Business Set Aside under NAICS code 423510, with a response deadline of September 22, 2026.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

ARFQ-0803-DOT2700000022-1 | STR-Channel 6" X 3/16" Inventory

Solicitation # ARFQ-0803-DOT2700000022-1

This solicitation, identified as ARFQ-0803-DOT2700000022-1, is issued by the state of West Virginia for the procurement of STR-Channel 6 inch by 3/16 inch inventory. The opportunity was posted on September 15, 2026, with a response deadline set for September 23, 2026, at 2:30 PM. The contract is managed by the West Virginia SLED organization, with the place of performance and office address located in Charleston, West Virginia. Primary coordination for this requirement is handled by Rebecca D Plants, and interested parties can access further details through the official West Virginia procurement portal.

POSTED

DEADLINE

ARFQ-0803-DOT2700000020-1 | One Time Purchase of Bar-H Flat 1/2" x 6" x 20'

Solicitation # ARFQ-0803-DOT2700000020-1

This solicitation, identified as ARFQ-0803-DOT2700000020-1, is for a one-time purchase of Bar-H Flat material measuring 1/2 inch by 6 inches by 20 feet. Issued by the state of West Virginia, the contract is managed by the agency in Charleston, West Virginia. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, at 2:30 PM. Interested parties can contact Amber J Heath as the primary point of contact for further details regarding this procurement.

POSTED

DEADLINE

Long Needle Pine Straw SupplierThis subcontract agreement establishes a supplier for the Alabama Department of Environmental Management to provide long needle pine straw for prime contractors. The scope of work involves the delivery of 600 bales of long needle pine straw, which must be supplied in increments of 100 bales. The supplier is required to comply with Alabama state and local tax laws, specifically regarding the registration and remittance of sales, use, and lease taxes as mandated by Section 41-4-142 of the Code of Alabama 1975. This procurement falls under NAICS code 423510.

Alabama Department of Environmental Management, ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

in about 23 hours

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Supply of Hardware Part Number 15600-600 / NSN 8145-01-477-4303This subcontract involves the supply of two units of hardware components, specifically part number 15600-600 under NSN 8145014774303, to support prime contractors delivering DLA Troop Support contracts. The items must be delivered to DLA Dist San Joaquin in Tracy, California, and must strictly adhere to the Buy American Act and the Berry Amendment. All deliverables must be packaged according to ASTM D3951 and DLA RP001 standards, with labeling compliant with MIL-STD-129. The contract falls under NAICS code 423830 and is managed through the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Manufacturing of 30-Gallon Shipping and Storage DrumsThis subcontract involves the manufacture and supply of 71 totally assembled shipping and storage drums for prime contractors supporting DLA Troop Support supply contracts. The drums must be fabricated to a rated capacity of 30 gallons, featuring a nominal height of 28.875 inches and an inner diameter of 18.5 inches. All production must utilize metal fabrication equipment to adhere to NSN 8110-01-467-0892 specifications and DLA quality standards. The contract is managed by Construction and Equipment Containers under the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. The opportunity was posted on September 16, 2026, with a response deadline of September 28, 2026, and falls under NAICS code 332439.

Other Metal Container Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Fuel Storage Tank Vent CapsThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the manufacture or sourcing of specialized fuel storage tank vent caps identified by NSN 5430013437301. The contractor is responsible for delivering physical vent caps that meet specific technical requirements and must perform quality sampling in accordance with MIL-STD-1916 or ASQ H1331, Table 1. Additionally, the provider must ensure full compliance with regulation 252.204-7016 concerning Covered Defense Telecommunications. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999, with the place of performance located in Tracy, California. Interested parties must submit their responses by September 28, 2026, to support primes delivering DLA Troop Support contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Plastic Bottle Supply (OEM/Authorized Distributor)This subcontract opportunity with the Department of Defense involves the supply of plastic bottles and screw caps, specifically part number 66106 from United States Plastic Corp, for prime contractors on DLA supply contracts. The selected provider must possess plastic molding capabilities or be an authorized distributor capable of delivering the physical components to designated DLA locations, including the performance site in Tracy, California. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001) and the DLA Packaging Requirements for Procurement (RP001). Interested parties must submit their responses by September 28, 2026, under NAICS code 327213.

Glass Container Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Shipping and Storage Container CoversThis subcontract involves the supply of four specialized shipping and storage container covers for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The provider is responsible for producing or sourcing covers that strictly adhere to NSN 8145-01-649-6866 specifications and must comply with the DLA Packaging Requirements for Procurement (RP001). Administrative requirements include the use of Wide Area WorkFlow for all reporting. The contract is categorized under NAICS code 336413, with the place of performance located in Tracy, California. The response deadline for this opportunity is September 28, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

SHIPPING AND STORAGE C

Solicitation # SPE8ED-26-T-1414

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

SHIPPING AND STORAGE C

Solicitation # SPE8ED-26-T-1411

Solicitation SPE8ED-26-T-1411 is a request for quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of two electric shipping and storage containers, identified by NSN 8145-01-477-4303 and part number 15600-600. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 15, 2027, and an original required delivery date of October 12, 2027. The contract is established as FOB Destination, and the government will perform both inspection and acceptance at the destination. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 for general packaging and MIL-STD-129 for labeling, while ensuring palletization complies with DLA packaging requirement RP001. Technical and quality requirements from the DLA Master List take precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation also incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for the safeguarding of covered defense information. All quotes must be submitted through the DIBBS portal.

Other Metal Container Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8ED-26-T-1417

All Other Rubber Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

BOTTLE, SCREW CAP

Solicitation # SPE8ED-26-T-1408

Solicitation SPE8ED-26-T-1408 is issued by DLA Troop Support Construction and Equipment Containers for the procurement of 57 screw cap bottles, identified by NSN 8125-01-019-0673 and United States Plastic Corp part number 66106. The requirement is classified under NAICS code 327213. Delivery is required within 167 days after the order, with an original required delivery date of January 8, 2027, and a need ship date of March 15, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Key regulatory requirements include the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold and the safeguarding of covered defense information under DFARS 252.204-7012. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes are submitted via the DIBBS portal, and the primary point of contact for this acquisition is Ogden Howard.

Glass Container Manufacturing

POSTED

about 9 hours ago

DEADLINE

DRUM, SHIPPING AND STOR

Solicitation # SPE8ED-26-T-1413

Solicitation SPE8ED-26-T-1413 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of 71 totally assembled shipping and storage drums under NSN 8110-01-467-0892. The drums must have a rated capacity of 30 gallons, a nominal height of 28.875 inches, and a nominal inner diameter of 18.5 inches, featuring one 2-inch and one 0.75-inch bung in the top head. Technical compliance requires testing per UN/POP 1A1/Y1.2/200 and markings in accordance with UN/POP5 and 49 CFR Subparts L and M. Delivery is set for FOB Origin with an original required delivery date of January 18, 2027, and a need ship date of March 15, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. The contract incorporates various FAR and DFARS clauses, including those for safeguarding covered defense information, the Buy American Act, and the Hazard Communication Standard for labeling. Quotes must be submitted via the DIBBS system by September 28, 2026.

Other Metal Container Manufacturing

POSTED

about 9 hours ago

DEADLINE

SPRAY GUN, LAUNDRY, COMM

Solicitation # SPE8ED-26-T-1409

Fabricated Structural Metal Manufacturing

POSTED

about 9 hours ago

DEADLINE

TANK, LIQUID STORAGE

Solicitation # SPE8ED-26-T-1412

DLA Troop Support is soliciting quotes for the procurement of eight liquid storage tanks under solicitation number SPE8ED26T1412. The items must be delivered to DLA Distribution Jacksonville within 246 days after the order is placed. The approved source for this requirement is identified as 66618 8000050500, and the procurement falls under NAICS code 332420. This is a combined type solicitation available exclusively as an electronic RFQ, with a response deadline of September 28, 2026. All responsible sources are invited to submit electronic quotes. No hard copies of the solicitation, specifications, plans, or drawings are available. Inquiries should be directed to the buyer via the DIBBS portal.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS