Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of White Lithium Grease (Aerosol)

Active

State & Local

Response Deadline09/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and delivery of 36 units of 10 oz. aerosol cans of white lithium grease to the Nashville Electric Service in Nashville. The contractor must provide the specific approved manufacturer part Lubri L0034-063, as alternate brands are strictly prohibited. The solicitation was posted on September 16, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 423510 and is intended for prime contractors to facilitate the delivery of the specified lubricant to the designated facility.

General Info

Supply 36 units of white lithium grease (Lubri L0034-063) to Nashville Electric Service.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

423510 - Metal Service Centers and Other Metal Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5186.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Lithium Grease

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 10 oz. aerosol cans of white lithium grease for prime contractors delivering to the Nashville Electric Service. Sources and delivers the specific approved manufacturer part Lubri L0034-063. Alternate brands are not accepted. Delivers 36 units of the specified lubricant grease to the designated facility.

Similar Contracts

Same NAICS industry code

Supply of Raw Metal Stock for Drum FabricationThis subcontract involves the supply of raw metal sheets or coils to prime contractors supporting DLA Troop Support supply contracts. The provider is responsible for sourcing and delivering metal stock that adheres to the specific gauge and material requirements for NSN 8110-01-467-0892, ensuring all deliveries are sent to the designated fabrication facility in New Cumberland, Pennsylvania. To maintain compliance with federal procurement standards for metal containers, the supplier must provide comprehensive Mill Test Reports and material certifications. This requirement is managed under NAICS code 423510 for the Department of Defense, with a response deadline of September 28, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 10 hours ago

DEADLINE

Raw Material Supply for FastenersThis subcontract, managed by the ASC Commodities Division of the Department of Defense, involves the supply of raw metal stock such as wire, strip, and bar for prime contractors fulfilling DLA supply contracts. The selected provider must source metal alloys that adhere to DLA Master List R or I requirements and ensure full traceability and compliance by providing Mill Test Reports for all certified raw metal stock delivered. The opportunity is categorized under NAICS code 423510 and is designated for performance at Hill AFB in Utah. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Metal/Alloy SupplyThis subcontract for Specialized Metal/Alloy Supply involves the sourcing and delivery of certified raw aerospace-grade alloys and metal stock to support prime contractors fulfilling DLA Aviation ASC Commodities Division requirements. The provider is responsible for ensuring all materials meet strict military and aerospace standards, which includes the provision of Mill Test Reports to verify compliance. The contract is managed by the Department of Defense under NAICS code 423510, with performance taking place in New Cumberland. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Material SupplierThe Specialized Material Supplier subcontract, managed by the Department of Defense Land Supply Chain, involves the provision of aerospace and defense-grade alloys and polymers to prime contractors. These materials must strictly adhere to DLA Master List R or I specifications and be certified free of prohibited substances, such as Hexavalent Chromium. To ensure quality and compliance, the supplier is required to provide Mill Test Reports for all delivered raw materials. This opportunity is categorized under NAICS code 423510 and is based in Portsmouth, Maine. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026. Interested parties can find further details through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Specialized Metallic Stock for Plug FabricationThis subcontract involves the supply of specialized raw metallic stock for plug fabrication to support prime contractors delivering DLA supply contracts. The provider is responsible for sourcing and delivering certified aerospace or industrial grade metal alloys that meet the specific material requirements associated with NSN 1650000317452. To ensure full compliance with DLA technical standards, the supplier must provide Mill Test Reports alongside the certified materials. Managed by the ASC Supplier Oper AE and AF Div within the Department of Defense, the contract falls under NAICS code 423510. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Steel Flat Bar Supplier (UNS K02600)This subcontract involves the supply of 612 units of hot-rolled steel flat bars, specifically STEEL UNS K02600, for prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The required materials must have dimensions of 1.000 inch thickness by 2.000 inch width and be provided in whole foot lengths of 10, 11, or 12 feet. Each shipment must be accompanied by a Certificate of Quality Compliance or Mill-Material Certification to ensure quality standards. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The solicitation is categorized under NAICS code 423510, with a response deadline set for September 28, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Cold Rolled/Drawn Steel Flat Bars (1018 Steel)This subcontract involves the supply of 408 units of cold rolled or drawn 1018 steel flat bars to support prime contractors for DLA Troop Support Construction and Equipment contracts. The required materials must feature square edges and flat profiles with dimensions of 0.375 inches in thickness, 1.000 inch in width, and lengths between 10 and 12 feet. The supplier is responsible for the waterproof stamping or stenciling of heat, lot, and contract numbers on each bar. All materials are to be delivered to the Department of Defense DDSP New Cumberland facility in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Raw Material Supply for MS51552A FastenersThis subcontract, managed by the ASC Commodities Division of the Department of Defense, involves the sourcing and delivery of certified aerospace-grade alloys, metal bars, and wire. The materials must strictly adhere to the chemical and physical properties defined in specification MS51552A and are intended for prime contractors fulfilling DLA supply contracts. To ensure quality and compliance, the supplier is required to provide Mill Test Reports for all delivered raw material stock. The contract is categorized under NAICS code 423510 and specifies the place of performance in Tracy, California. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026. The primary objective is to ensure the manufacturer receives certified raw materials that meet all necessary aerospace standards for fastener production.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of SPOOLARC 82 Welding ElectrodesThis subcontract, issued by the Department of Defense for the Navsup Flt Logistics Ctr Puget Sound, involves the supply of specialized MIG welding electrodes for prime contractors. The requirement consists of 15 spools of 0.035 inch diameter steel SPOOLARC 82 wire, each weighing 35 pounds. All materials must strictly adhere to MIL-E-23765/1, MIL-TYPE 70S-3, and QPL-23765-52 specifications. The contractor is required to provide MIL-SPEC certification sheets for the delivery and ensure all items are labeled as NON LEVEL 1 AND NON NSN. This opportunity is designated as a Total Small Business Set Aside under NAICS code 423510, with a response deadline of September 22, 2026.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

ARFQ-0803-DOT2700000022-1 | STR-Channel 6" X 3/16" Inventory

Solicitation # ARFQ-0803-DOT2700000022-1

This solicitation, identified as ARFQ-0803-DOT2700000022-1, is issued by the state of West Virginia for the procurement of STR-Channel 6 inch by 3/16 inch inventory. The opportunity was posted on September 15, 2026, with a response deadline set for September 23, 2026, at 2:30 PM. The contract is managed by the West Virginia SLED organization, with the place of performance and office address located in Charleston, West Virginia. Primary coordination for this requirement is handled by Rebecca D Plants, and interested parties can access further details through the official West Virginia procurement portal.

POSTED

DEADLINE

ARFQ-0803-DOT2700000020-1 | One Time Purchase of Bar-H Flat 1/2" x 6" x 20'

Solicitation # ARFQ-0803-DOT2700000020-1

This solicitation, identified as ARFQ-0803-DOT2700000020-1, is for a one-time purchase of Bar-H Flat material measuring 1/2 inch by 6 inches by 20 feet. Issued by the state of West Virginia, the contract is managed by the agency in Charleston, West Virginia. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, at 2:30 PM. Interested parties can contact Amber J Heath as the primary point of contact for further details regarding this procurement.

POSTED

DEADLINE

Long Needle Pine Straw SupplierThis subcontract agreement establishes a supplier for the Alabama Department of Environmental Management to provide long needle pine straw for prime contractors. The scope of work involves the delivery of 600 bales of long needle pine straw, which must be supplied in increments of 100 bales. The supplier is required to comply with Alabama state and local tax laws, specifically regarding the registration and remittance of sales, use, and lease taxes as mandated by Section 41-4-142 of the Code of Alabama 1975. This procurement falls under NAICS code 423510.

Alabama Department of Environmental Management, ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

in about 22 hours

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of 1/4" Insulated Nut DriversThis subcontract is for the supply of eight 1/4 inch insulated nut drivers to the Nashville Electric Service in Nashville. The required tools must feature hollow shafts and handles with a 1000 volt rating that comply with F1505 standards. Approved brands for this procurement include WIHA, OELWORLD, or ELECT SA. The contract falls under NAICS code 423830 and was posted on September 16, 2026, with a response deadline of September 22, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z5187

Nashville Electric Service has issued solicitation Z5187 for the procurement of eight 1/4 inch nut drivers. The required tools must feature a hollow shaft and an insulated handle with a 1000 volt rating meeting F1505 standards. Approved manufacturers and part numbers include ELECT SA L-HN014, OELWORLD IT-30804-3, and WIHA 32264, though equal alternatives are acceptable. Vendors quoting alternate brands must specify the brand in the comments field and provide descriptive literature. Bids must be submitted through the Bid Center by 2:00 pm local time on September 22, 2026. A key evaluation factor for the award is the earliest delivery time, which vendors must state in calendar days. The primary point of contact for this procurement is Alan Martinez. Vendors are responsible for resolving any discrepancies between part numbers and descriptions with the buyer prior to the closing date.

Saw Blade and Handtool Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z5184

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z5185

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z5186

Nashville Electric Service has issued solicitation Z5186 for the procurement of 36 units of 10 oz. aerosol cans of White Lithium Grease. The requirement specifically mandates the use of Lubri L0034-063, and alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on September 22, 2026. Vendors are required to state their earliest delivery time in calendar days, as the delivery schedule may be a determining factor in the award process. The primary procurement contact for this solicitation is Alan Martinez. Any discrepancies between the ordering description and the part number must be clarified with the buyer before the published close date.

Petroleum Lubricating Oil and Grease Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply and Delivery of Disinfecting Cleaning WipesThis subcontract with Nashville Electric Service involves the supply and delivery of 252 canisters of disinfecting cleaning wipes, with each canister containing 35 wipes. The contractor must be an authorized supplier or distributor and is required to provide specific manufacturer part numbers, either Clorox 01654 or Lysol RAC-82159. The total quantity of canisters must be delivered within a specified calendar day window to the performance location in Nashville. The solicitation was posted on September 15, 2026, with a response deadline of September 22, 2026, under NAICS code 812331.

POSTED

DEADLINE

Supply of Flasher Strobe Pole Ratchet Strap KitsThis subcontract agreement involves the supply of six specialized safety lighting kits for prime contractors working on Nashville Electric Service utility projects in Nashville. Each kit is designed for pole-mounted transportation and includes a red strobe light, two orange flags, an LED light capable of 5 to 7 miles of visibility, and heavy-duty ratchet straps. The kits are provided with batteries to ensure immediate operational readiness upon delivery. This procurement falls under NAICS code 423610 and is managed by the Nashville Electric Service in Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Hot Dip Galvanized Machine Bolts (3/4" x 12")This subcontract involves the supply of specialized 3/4 inch by 12 inch hot dip galvanized machine bolts for Nashville Electric Service utility infrastructure projects. The required bolts must feature roll threading, cone points with attached square nuts, and a tensile strength of 18,350, delivered in standard cartons. Approved brands for this contract include Hubbell, Maclean, or Powerline. The opportunity is based in Nashville, Tennessee, with a response deadline of September 22, 2026.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Supply of 4-Inch PVC Thinwall Conduit ElbowsThis subcontract agreement involves the supply of specialized 4-inch thinwall PVC conduit elbows for prime contractors working on Nashville Electric Service electrical infrastructure projects. The contractor is required to deliver 25 units featuring a 36-inch radius and a curvature angle of 11 1/4 degrees, ensuring all items meet specific technical requirements and are delivered rapidly to designated locations in Nashville. The opportunity was posted on September 15, 2026, with a response deadline of September 22, 2026. Classified under NAICS code 335211, the contract is managed by the Nashville Electric Service in Tennessee. Interested parties can find further details and submit responses through the official vendor portal.

Electric Housewares and Household Fan Manufacturing

POSTED

DEADLINE

Supply of Dielectric Oil Filter CartridgesThis subcontract for the Nashville Electric Service involves the supply of specialized 12 inch diameter double height utility oil filter cartridges designed for prime contractors working on utility projects. The contractor is responsible for manufacturing or sourcing cartridges that meet 05 media grade specifications to ensure the effective removal of water and particulates from dielectric oils. Each unit must be equipped with a nitrile gasket and a wire or plastic lifting handle, and must be packaged in a water impervious foil bag. The project is based in Nashville, Tennessee, and falls under NAICS code 333132. Interested parties must respond by September 22, 2026, following the posting date of September 15, 2026. The primary objective of the contract is the delivery of completed filter cartridges that adhere to these specific technical and packaging requirements.

Oil and Gas Field Machinery and Equipment Manufacturing

POSTED

DEADLINE

Vinyl Cleaner SupplierThis subcontract agreement is for the supply and delivery of specialized vinyl cleaning solution to the Nashville Electric Service in Nashville. The selected supplier is responsible for providing 12 units of vinyl cleaner packaged in 10 oz pump spray bottles and delivering them to the designated location. The contract requires the supplier to specify the delivery timeframe in calendar days. This procurement opportunity is categorized under NAICS code 424720 and is open for responses until September 21, 2026.

Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

DEADLINE

Supply of NFPA 70E Compliant FR RaincoatsThis subcontract involves the supply of four flame-retardant, non-conductive raincoats for prime contractors working on PPE projects for the Nashville Electric Service. The required equipment consists of NASCO 1701CFY114-5XL coats, which feature Nomex mesh ventilation, storm fly fronts, and dielectrically welded seams. Each garment must be labeled with the NES logo in black ink on the cape back. The deliverables must strictly adhere to safety and quality standards, including NFPA 70E, ASTM F1891-12, ASTM F2733-17, and ANSI 107-2015. The project is categorized under NAICS code 315220 and will be performed in Nashville. Responses for this requirement are due by September 22, 2026.

Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS