Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Rocker Arm for Engine

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of a single military-specification Rocker Arm for Engine P, identified by NSN 2815013506351 and part number 7E7205, to support a U.S. Navy vessel stationed at an overseas Fleet Post Office address. Delivery must be completed no later than August 12, 2026, ensuring timely operational readiness of the vessel’s engine system. The contract is categorized as a subcontract under NAICS code 336310, which pertains to aerospace product and parts manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Although the solicitation number and specific place of performance details are not provided, performance is directed to an overseas U.S. Navy location, necessitating international logistics coordination. The contract’s issuance date is listed as August 2, 2026, indicating it was executed shortly before the delivery deadline, suggesting urgency in fulfilling this critical maintenance or replacement requirement.

General Info

Supply of military Rocker Arm for Navy vessel by August 12, 2026, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of one military-specification Rocker Arm, Engine P (NSN 2815013506351, P/N 7E7205), to a U.S. Navy vessel at an overseas FPO address by August 12, 2026.

Similar Contracts

Same NAICS industry code

VALVE, ROTARY, SELECT

Solicitation # SPE7MC-26-Q-0403

The contract pertains to the procurement of six rotary select valves identified by the NSN 4820-01-642-0631 under solicitation SPE7MC-26-Q-0403, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 300 days after award, with inspection and acceptance occurring at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specifications. Packaging must be palletized according to DLA requirements, and units are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract specifies the unit of issue as each, with pricing and delivery tied to the government’s external procurement system and transportation governed by DLAD Proc Notes C19 and C20. The item is classified under NAICS 336310, with a required delivery date of May 10, 2027, and the primary point of contact is Janelle Hanley of the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-907Z

The contract pertains to the procurement of an O-RING with National Stock Number 5331-01-718-7596, quantity of four units, under solicitation SPE7L1-26-T-907Z, with a response deadline of August 14, 2026, and delivery required within 203 days of award. The item must be packaged and sealed in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The product must be free of ozone-depleting chemicals and asbestos, with any substitutes subject to approval unless explicitly authorized by specifications. Supply chain traceability documentation is mandatory per DLA Directive Procurement Notes C03 from August 2016, and contractor retention of such records is required. Documentation for source approval requests and the removal of government identification from non-accepted items are governed by specific contractual clauses. Technical and quality requirements referenced by R or I numbers are defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The place of performance is Tracy, CA, 95304-5000, and the contracting office is within the Department of Defense’s Land Supply Chain under the primary point of contact Chelsea Cunningham.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9150

The contract involves the procurement of 307 O-rings with NSN 5331-01-670-9547 under solicitation SPE7LX-26-U-9150, which is a Total Small Business Set-Aside as defined by the FAR. The requirement mandates strict adherence to technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. All supplied items must be free of asbestos and ozone-depleting chemicals, with any substitutions requiring prior approval unless explicitly authorized by the specification. Packaging must comply with DLA requirements, and government identification must be removed from any non-accepted supplies. Source approval documentation must be submitted according to RC001 criteria. Delivery is due within 88 days of award, with the solicitation closing on August 18, 2026, and responses must be submitted through the DIBBS portal. The contracting activity is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 9 hours ago

DEADLINE

PISTON-SHAFT, VALVE

Solicitation # SPE7M1-26-T-246J

The contract is for one piston-shaft, valve with NSN 4820-01-066-1572 and part number 504817-1, procured by the Department of Defense through DLA under solicitation SPE7M1-26-T-246J. Delivery is required within five days of award, with shipment to Tinker AFB, Oklahoma, FOB origin, and no tolerance for quantity variance. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including marking and labeling per MIL-STD-129 and palletization under RP001. CMMC Level 2 Self-Assessment is mandated for cybersecurity compliance, and government identification must be removed from non-accepted supplies. Shipping must be conducted via traceable freight methods; parcel post is prohibited. The delivery deadline is July 31, 2026, and the supplier is TransDigm Inc. The contract incorporates specific technical and quality standards referenced by R and I numbers from the DLA Master List, and payment terms are defined by the CLIN structure with a unit price of $1.00. All correspondence and logistics must reference the provided shipping addresses, contact details, and government tracking identifiers.

MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Exhaust Manifold Manufacturing and SupplyThe contract entails the manufacture and supply of a single exhaust manifold compliant with military specifications, encompassing all associated processes such as preservation, packaging, marking, and bar-coding to ensure seamless integration into DLA logistics systems. The work must meet stringent defense standards for durability, performance, and traceability, with final delivery targeted to the specified place of performance in Johnston, Iowa, with a ZIP code of 50131-1824. All materials and methods must align with DoD requirements for supply chain integrity and operational readiness. This subcontract, identified under NAICS code 336310, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Land Supply Chain under the Department of Defense. The procurement is part of a broader effort to maintain critical component availability for military applications, requiring full adherence to federal logistics protocols. The vendor must ensure end-to-end compliance from production through final delivery, with bar-coding and marking configured to support automated inventory and distribution systems used by DLA.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fuel Injection Nozzle SupplyThe contract solicits the supply of four commercial off-the-shelf fuel injection nozzles with National Stock Number 2910012064532, intended for delivery to DLA Distribution San Joaquin in Tracy, California, with a zip code of 95304-5000. The work falls under the NAICS code 336310, which corresponds to engine and engine parts manufacturing, indicating the specificity of the product to automotive or aviation propulsion systems. The contract is classified as a subcontract and was posted on August 2, 2026, with a response deadline of August 13, 2026. The agency listed is LAND SUPPLIER OPNS ENGINES under the Department of Defense, pointing to a military or defense-related application of the component. Delivery must be completed at the specified location without deviation, and the requirement is for existing commercial products, not custom-manufactured items. The solicitation is accessible via the DIBBS platform under reference number SPE7L526T4727, and while no point of contact or set-aside details are provided, bidders are expected to comply with standard defense supply protocols for commercial off-the-shelf items.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-905P

The contract pertains to the procurement of O-RINGS with NSN 5331-01-652-8142, requiring delivery of 74 units under solicitation SPE7L1-26-T-905P. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, subject to strict traceability and packaging requirements under DLA directives including DLAD Procurement Note C03 for supply chain documentation retention and MIL-DTL-117 Type II Class C Style 1 for opaque, waterproof, greaseproof packaging to protect against UV degradation. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special code 32 indicating Type I shelf life, and palletization must follow DLA Packaging Requirements for Procurement. Delivery is FOB origin with no quantity variance, inspection and acceptance occur at destination, and shipment must be completed within 103 days by November 25, 2026. The item is designated as non-surplus acceptable, and all technical and quality standards referenced, including those identified by R and I numbers, are governed by the DLA Master List. Transportation logistics adhere to DLAD Procurement Notes C19 and C20, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by DoD unit of issue standards and incorporates applicable defense information handling requirements under RD003.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-903Q

This contract is for the procurement of one O-RING with NSN 5331-01-670-1894 under solicitation SPE7L1-26-T-903Q, with a response deadline of August 13, 2026, and a required delivery within five days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Documentation for source approval must meet RC001 criteria, and the contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements while still enforcing product performance standards; alternative chemicals require prior approval. The item must also be completely free of asbestos, with any prior asbestos-containing codes or parts deemed unacceptable, and substitutions must undergo approval per Clause L30 and Provision 4 conditions. Covered defense information protections apply, and performance is to occur in Johnston, Iowa, with Kristina Derry at DLA as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

DEADLINE

VALVE, AIR SHUTDOWN

Solicitation # SPE7MC-26-T-163U

The contract is for the procurement of four air shutdown valves with NSN 4820-15-011-3048 and part number 057.08007-REV 3.0 from ISOTTA FRASCHINI MOTORI SPA, supplied under solicitation SPE7MC-26-T-163U. The valves must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which is incorporated by reference and controlled by the revision in effect on the solicitation issue date. Delivery is required FOB origin within 158 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containment codes, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must follow DLA packaging standards, and the delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The purchase price is $4.00 per unit, totaling $16.00 for the four units. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the contract falls under NAICS code 336310 for aerospace product and parts manufacturing. The point of contact is Paula Mcclary, reachable via email and phone.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-905E

The contract is for the procurement of 9 units of an O-ring identified by NSN 5331016800251 under solicitation SPE7L1-26-T-905E, issued by the Defense Logistics Agency’s Land Supply Chain. Delivery is required FOB origin within 213 days after the date of order, with a firm delivery date of March 15, 2027, to the DDSP New Cumberland Facility in Pennsylvania. The item is classified under Federal Supply Classifications 5330/5331, which are susceptible to ultraviolet degradation, necessitating packaging in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 for all direct vendor deliveries, foreign military sales, and stock shipments. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods, cushioning, and intermediate container requirements, while labeling must follow MIL-STD-129 including the special marking “Do not bend.” Palletization must conform to DLA’s RP001 packaging standards. The contract mandates stringent quality and cybersecurity compliance, requiring adherence to SAE AS9100 for non-tailored higher-level quality management and CMMC Level 2 self-assessment to address cybersecurity maturity. Hazardous materials must comply with IP025 and 29 CFR 1910.1200, with Safety Data Sheets required prior to award and ongoing updates if composition changes occur. Covered defense information is subject to DFARS clauses, including 252.204-7012 for safeguarding, and 252.223-7001 for hazard labeling and communication. The contractor must provide a UEI and CAGE code if supplying covered telecommunications equipment or services, and represent small business status and socioeconomic category eligibility. Inspection and acceptance occur at destination by government personnel, and all invoices must be submitted electronically via WAWF. The contract incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking prevention, employment eligibility, sustainable products, cybersecurity, export controls, hazardous materials, and subcontracting rules. Although unit pricing is not specified in the CLIN, historical data indicates an estimated total value of $10,089 based on prior awards. The solicitation is processed electronically via DIBBS with a response deadline of August 13

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-903F

The contract pertains to the procurement of one O-ring identified by NSN 5331-99-549-5804 and part number 2301/1006 from J.C. BAMFORD EXCAVATORS LIMITED, under solicitation SPE7L1-26-T-903F. The item must be delivered in five days FOB origin with no quantity variance allowed and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, and labeling must adhere to MIL-STD-129 without special marking. Packaging and preparation follow MIL-STD-2073-1E with specific preservation methods, and palletization aligns with DLA’s standard requirements. The delivery destination is W50EA0 at 201 SCHAFER DRIVE, RONKONKOMA NY 11779-7353, with shipment required via traceable means excluding parcel post. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. Documentation for source approval and handling of covered defense information also applies, and all units are issued per DoD standards with a single unit price of one dollar, totaling one dollar for the order. The contract is issued by the Department of Defense’s Land Supply Chain with Kristina Derry as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

DEADLINE

CAP, FILLER OPENING

Solicitation # SPE4A5-26-T-319F

The contract pertains to the procurement of four CAP, FILLER OPENING units (NSN 2910017328686, Part Number 165535-1) from RTX CORPORATION under solicitation SPE4A5-26-T-319F, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The total contract value is $16.00, with a fixed unit price of $4.000 per unit and no variance allowed in quantity. Delivery is required within 20 days of award, FOB origin, to the destination address at Assault Craft Unit 4, Building 3821, 2155 11th Street, Virginia Beach, VA 23459-3018. The item must be delivered using the fastest traceable means, explicitly prohibiting parcel post. Packaging must strictly conform to MIL-STD-2073-1E, with preservation method 31, clean and dry preparation, no preservation coating, wrapping per unit, and intermediate containers in quantities of ten. Palletization must follow DLA’s RP001 requirements, and all marking must comply with MIL-STD-129 using a U packing code and no special marking indicators. The delivery is subject to inspection and acceptance at the destination by government personnel. Compliance with a wide range of federal and defense regulations is mandatory, including FAR and DFARS clauses covering combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification and safety data submission, cybersecurity (NIST SP 800-171), whistleblower protections, disclosure of government information, and subcontracting for commercial items. Contractors must submit Safety Data Sheets and hazard labels under DFARS 252.223-7001 per OSHA’s Hazard Communication Standard. Invoicing must be processed exclusively through Wide Area WorkFlow (WAWF), and payment obligations are subject to potential offsets for liens or debts under DFARS 252.232-7010. Transport of supplies by sea requires compliance with U.S.-flag vessel requirements unless waived. The contract includes alternate clauses for authorization and consent to government use of technical data. No evaluation factors, attachments, or completed offeror representations are provided; therefore, the solicitation awaits responsive bids that meet all technical, compliance, and administrative criteria. The NAICS code is

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Hazard Communication and Labeling Compliance

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

Packaging and Preservation Services for Military Shipments

Other Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305000667327)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

CARTRIDGE, RESPIRATO

Solicitation # SPE8E6-26-T-3961

This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M5-26-Q-0824

The Defense Logistics Agency under the Department of Defense has issued a solicitation for a single unit of a waveguide identified by NSN 5985-01-558-4115 under purchase request 7017225749. The solicitation, numbered SPE7M5-26-Q-0824, was posted on August 3, 2026, with a response deadline of August 6, 2026, at 5:00 PM. This federal procurement is classified as a solicitation without a specific set-aside designation or NAICS code, indicating it is open to general federal contractor participation. The place of performance and point of contact information are not provided, and the contract is administered through the DLA’s DIBBS platform, with all details accessible via the provided UI link.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0342

The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-1939

The contract specifies the procurement of one metal plate identified by NSN 9535-01-477-4004 and part number 230-10269, with a unit of issue as a single piece. Delivery is required within five days of award, with goods to be shipped FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 10, drying method 1, and preservative material 00. Marking follows MIL-STD-129 with no special marking code, and palletization adheres to DLA packaging requirements. The shipment is to be delivered via traceable means excluding parcel post to a military address at Fort Bliss, Texas, with detailed routing instructions including RDD and TCN identifiers. The contract references technical and quality standards from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation number is SPE8E4-26-T-1939, issued by the Defense Logistics Agency under NAICS code 331491, with a response deadline of August 14, 2026, and an original required delivery date of July 31, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0343

The contract pertains to the procurement of four metal bars with part number 9530-01-691-9562 under solicitation SPE8E4-26-Q-0343 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, and responses must be submitted by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval may access the controlled data. Additionally, the contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessment organization. The point of contact is Leslie Morales-Zera, reachable via email or phone provided.

Rolled Steel Shape Manufacturing

POSTED

about 9 hours ago

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3752

The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.

Broom, Brush, and Mop Manufacturing

POSTED

about 9 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4547

This contract is for the procurement of six battery storage units identified by NSN 6140-01-701-5915 and part number A66-11336-002, supplied by Daimler Truck North America LLC under solicitation SPE7L7-26-T-4547. The items are classified as a Type I (Code H) critical application item with a non-extendable shelf life of 12 months, requiring strict adherence to packaging, marking, and shipping standards specified in MIL-STD-2073-1E and MIL-STD-129, including special labeling for shelf life code 32. All packaging must comply with DLA’s procurement requirements and hazardous materials handling protocols, and the units must be shipped via traceable freight methods—not parcel post—to the designated delivery point at USCG AIRSTA Barber’s Point in Kapolei, Hawaii, with delivery due within 20 days of contract award. The units must not contain intentionally added mercury except where functionally necessary in batteries or approved instruments, and any mercury-containing components must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The contract includes provisions for hazardous communication, removal of government identification from non-accepted supplies, and covers defense information under RD003, with full technical and quality requirements referenced from the DLA Master List. The unit of issue is each, priced at $6.00 per unit for a total of $36.00, with no quantity variance allowed, inspection and acceptance occurring at destination, and the original required delivery date is July 24, 2026.

Battery Manufacturing

POSTED

about 9 hours ago

DEADLINE

COMPRESSOR UNIT, REF

Solicitation # SPE8E8-26-T-4941

The contract pertains to the procurement of one compressor unit, reference model, with NSN 4130-01-490-3757, under solicitation SPE8E8-26-T-4941 issued by the Defense Logistics Agency. Delivery is required within five days of award, FOB destination, with no variance permitted in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, container types, and marking in accordance with MIL-STD-129, with no special markings required. The unit must not contain mercury or mercury-containing compounds unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Transportation must follow DLAD Proc Note C19 and C20, using traceable methods only—parcel post is prohibited—and shipments are to be directed to USS ASHLAND LSD-48 at FPO AP 96660 under RDD 777, with VSM used by DLA vendors. The item falls under NAICS code 333415, with a required delivery date of July 31, 2026, and the solicitation response deadline is August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, and source approval documentation must meet RC001 standards. All compliance and delivery instructions are binding and must be strictly adhered to by the vendor.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-4940

The contract pertains to the procurement of one air filter element with NSN 4130016962270 and part number 8005-3401-2333, supplied by TECH-ETCH, INC. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance both occur at the destination point, and the item must be packaged in compliance with ASTM D3951, subject to overriding DLA Master List of Technical and Quality Requirements, while also adhering to MIL-STD-129 for marking and labeling. Packaging and palletization must follow DLA’s RP001 requirements, with the unit of issue specified as EA and quantity per unit pack as 001. Shipments must use the fastest traceable means and explicitly prohibit parcel post; the freight delivery address is Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The required delivery date is July 31, 2026, with a contract solicitation number SPE8E8-26-T-4940 and a response deadline of August 14, 2026. All documentation, including source approval requests and removal of government identification from non-accepted supplies, must comply with referenced DLA directives, and the contracting office is under the Defense Logistics Agency with primary point of contact Alexis Selby.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE