Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Sealing Components (Gaskets, O-Rings, Seals)

Active

Federal

Response Deadline07/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and supply of elastomeric sealing components such as gaskets, O-rings, and seals specifically designed for use in fluid and pressure systems aboard aerospace platforms. These components must meet stringent performance and reliability standards required for aviation and defense applications, ensuring leak prevention and operational integrity under extreme environmental and pressure conditions. The work is being procured as a subcontract under the NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Defense Logistics Agency Aviation on behalf of the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, at 9:00 PM. The place of performance is identified as S Coffeyville, though no specific state or zip code is provided. The contract does not indicate a set-aside classification, suggesting it is open to all eligible contractors without preference for small businesses or other categories. Interested parties must submit proposals through the SAM.gov platform by the stated deadline to be considered for award, with performance expected to support critical aerospace systems within the DoD’s supply chain.

General Info

Manufacture and supply of aerospace-grade elastomeric seals for DoD fluid systems under SAM.gov by July 31, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

S Coffeyville, OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 09:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of elastomeric sealing components including gaskets, O-rings, and seals for fluid and pressure systems in aerospace platforms.

Similar Contracts

Same NAICS industry code

Nonmetallic Hose Supply (Bulk)The contract calls for the supply of 50-foot bulk nonmetallic hose with a 0.298-inch inner diameter, specifically compliant with the National Stock Number 4720010269156, under an indefinite-delivery arrangement. This procurement is classified as a subcontract and falls under the NAICS code 326220, indicating it relates to plastic pipe and tube manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, and is managed by the Maritime Supply Chain, a division within the Department of Defense. The place of performance and point of contact details are not provided, and no set-aside provisions are indicated, suggesting the opportunity is open to all eligible suppliers. The contract can be accessed through the DIBBS platform using the provided UI link for full solicitation terms and submission requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

HOSE ASSEMBLY, NONMEThis contract is for a nonmetallic hose assembly with the NSN 4720-01-581-9015, requiring delivery of 20 units within 228 days under solicitation SPE7M4-26-T-281Q. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including configuration change management, supply chain traceability per DLA Procurement Note C03, and physical identification requirements such as bare item marking and MIL-STD-130N for U.S. military property identification. Shelf life is strictly controlled at 120 months with no extensions, and markings must conform to MIL-STD-129, including clear display of manufacture and expiration dates on all packaging levels. The product must be free of ozone-depleting chemicals, with any substitutes requiring prior approval, and packaging must follow MIL-STD-2073-1E with special shelf life code 32. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with zero tolerance for quantity variance. Inspection and acceptance occur at origin, and the contractor must conduct a first article test as indicated by a separate line item valued at $1,000, with the actual required test quantity defined by FAR clauses 52.209-3 or 52.209-4. Full and open competition applies, and all documentation must align with DLA directives on transportation and traceability.

FLUID HANDLING DIVISION

POSTED

DEADLINE

GUARD, HOSE-TUBINGThis contract is for the procurement of 871 units of guard hose-tubing with NSN 4720-01-730-6318 under solicitation SPE7M4-26-Q-0863, issued by the Defense Logistics Agency’s Fluid Handling Division. The requirement is part of a federal acquisition and specifies a delivery deadline of 90 days after order placement, with a response deadline of July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Multiple quality and compliance mandates are enforced, including tailored higher-level quality standards, configuration change management procedures, inspection and acceptance at origin, physical identification of items, and mandatory retention of supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016. Additionally, export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons or entities, whether inside or outside the U.S., and require contractors to hold JCP certification, complete mandatory DOD export training, and receive prior DLA approval to access such data. Packaging, labeling, and removal of government identification from non-accepted supplies must also comply with DLA standards. The place of performance is designated as New Cumberland, Pennsylvania, with Ashley Carroll of the DLA as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Fourth Stage Piston Seal Set Supply/InstallationThe contract encompasses the supply and installation of a piston seal set with part number ML12522256G1 for the fourth stage of a high-pressure air compressor, requiring precise seal fitment, comprehensive leak testing, and seamless integration into the existing system. All work must meet stringent performance and reliability standards critical to the operational integrity of the compressor, ensuring optimal pressure retention and long-term durability under high-stress conditions. The task involves not only delivering the correct seal components but also executing the installation with certified procedures and verifying system performance through rigorous testing protocols. The contract is designated as a subcontract under NAICS code 326220 and is managed by the Southwest Regional Maintenance Center under the Department of Defense. The work is to be performed in San Diego, California, with a response deadline of August 13, 2026, at 6:00 PM. The solicitation was posted on July 24, 2026, and no set-aside provisions apply, meaning all qualified vendors may submit proposals. The facility is responsible for maintaining full traceability of parts and documentation throughout the installation process to ensure compliance with defense procurement standards and to support future maintenance and audit requirements.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Hose Assembly, Non Metallic for Fuel SystemsThe Department of National Defence is soliciting bids for two identical nonmetallic hose assembly sets, part number CB145M0180-0166, manufactured by DANFOSS POWER SOLUTIONS II, LLC with NCAGE code 1276, to be delivered in equal quantities of ten units each to CFB Halifax and CFB Esquimalt. The requirement is governed under Canadian procurement standards with no U.S. FAR clauses applied; instead, Canadian-specific contract clauses such as 2010A and 2003 are referenced, with modifications incorporating packaging, marking, and shelf life stipulations. Each item must have at least 75% of its 60-month authorized shelf life remaining at delivery, and all packaging must comply with Canadian Forces Packaging Specification D-LM-008-030/SF-001, including mandatory markings for specification number, manufacturer, cure date, manufacture date, and expiration date on both interior and exterior packaging. Barcoding is strictly regulated: material-level barcodes must use UCC/EAN-128 symbology with Application Identifier 241 for the Permanent System Control Number or 7001 for the NATO Stock Number, with human-readable text beneath, and outer packages must bear NSN (AI 7001) barcodes as per D-02-002-001/SG-001 and D-LM-008-002/SF-001 standards. All products must be new, of current manufacture, interchangeable with existing military equipment, and meet ISO 9001:2015 quality assurance requirements. Bidders may propose equivalent or substitute products only if they provide full technical specifications, product literature, and a compliance statement, and must certify Canadian content under Clause A3050T, with foreign goods subject to disadvantage in evaluation. The solicitation is subject to a preference for Canadian goods and services and mandates full disclosure of manufacturer authorization if the bidder is not the original producer. Bids are evaluated strictly on a Lowest Price Technically Acceptable basis, with technical compliance being mandatory and non-negotiable, followed by price comparison on an item-by-item basis. Delivery is required under DDP Incoterms® 2020 terms to designated supply depot locations at CFB Halifax and CFB Esquimalt, with appointments mandatory, and all costs—including transportation, duties, and taxes—are

Department of National Defence

POSTED

DEADLINE

Supply of Industrial BeltsThe contract seeks the supply and timely delivery of industrial belts, including V-belts, timing belts, and conveyor belts, to support the maintenance of mechanical equipment under the oversight of the Trinity River Authority of Texas. The solicitation is classified as a subcontract with a NAICS code of 326220, indicating its alignment with rubber product manufacturing, and all responses must be submitted by August 12, 2026. There is no specified set-aside type or preference, and the place of performance details are not provided, though the work is expected to serve operations within Texas. The posting date is listed as July 23, 2026, and interested parties are directed to the online portal for further details and submission instructions.

Trinity River Authority of Texas

POSTED

DEADLINE

Viton Seal Supply (Fluoroelastomer Seals)The contract is for the supply of certified Viton fluoroelastomer seals designed for high-pressure hydraulic systems, requiring strict adherence to military performance standards and full material traceability throughout the production and delivery process. These seals must meet stringent reliability and durability criteria to ensure safe and consistent operation in mission-critical defense applications, with all components sourced, manufactured, and inspected in compliance with specified federal and industry requirements. The work is targeted toward a defense contractor or manufacturer supporting the Department of Defense. The solicitation, under NAICS code 326220 for rubber product manufacturing, is structured as a subcontract and has a response deadline of August 3, 2026. Performance will be conducted at or delivered to New Cumberland, Pennsylvania, with the contract issued under the Defense Logistics Agency’s procurement system. The requirement emphasizes quality validation, documentation integrity, and compliance with defense-specific material specifications, and bidders must be prepared to demonstrate capability in producing certified fluoroelastomer seals at scale under controlled conditions to meet exacting military-grade benchmarks.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Fiber Rope Assembly Manufacturing and SupplyThe contract entails the manufacture and delivery of ten single-leg fiber rope assemblies identified by NSN 4020-01-579-7011, requiring strict adherence to Department of Defense technical specifications, ASTM D3951 for packaging and labeling, and MIL-STD-129 for uniform military marking standards. All units must be produced to meet DLA’s quality and performance requirements to ensure compatibility and reliability in operational environments. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the entire effort is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility exclusively to certified small businesses. The North American Industry Classification System code 326220 identifies the relevant industrial category for rubber and plastic product manufacturing, aligning the project with specialized material fabrication capabilities. The solicitation was posted on July 23, 2026, and responses are due no later than August 3, 2026, with the opportunity presented as a subcontract under the Department of Defense’s Construction & Equipment Manu & Con agency. Interested vendors must submit their proposals through the official DIBBS platform via the provided link, and all submissions are expected to fully comply with federal acquisition regulations and small business eligibility criteria. Although no specific point of contact is listed, all communications and technical inquiries must be directed through the designated DIBBS portal. The contract emphasizes precision manufacturing, regulatory compliance, and small business participation as core objectives for successful award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a nonmetallic hose assembly compliant with MIL-DTL-13444 for fuel and oil applications, identified by NSN 4720-01-678-3011 and part number MS52103Z-161420R. The item is classified as a critical application product with a shelf life of 120 months, non-extendable, and is subject to strict shelf-life labeling requirements per MIL-STD-129, mandating clear indication of both the cured date and expiration date on all packaging levels. The hose assembly must be sourced from qualified manufacturers listed on the Qualified Products List or Qualified Manufacturers List, and any configuration changes require formal engineering change proposals or variance requests. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for Type I shelf-life items, with palletization following DLA packaging standards. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Forty-seven units are required to be delivered within 168 days, with a required ship date of January 19, 2027, to the designated DLA distribution center in Tracy, California. The contract is governed by DLA technical and quality requirements referenced in the DLA Master List, and unit of issue is each (EA), with the procurement originating under solicitation SPE7M4-26-T-282D issued by the Department of Defense’s Fluid Handling Division.

FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETALThe contract is for a nonmetallic hose assembly identified by NSN 4720-01-589-1558 with a quantity of 124 units, under solicitation SPE7M4-26-T-281S, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 168 days after award, and responses must be submitted by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and configuration changes require formal engineering change proposals or variance requests. The item does not require Unique Identification per the service customer’s request, though physical marking must align with RQ017 guidelines. Government identification must be removed from non-accepted supplies as per RQ011, and the contract may involve covered defense information under RD003. Performance is to be delivered to New Cumberland, Pennsylvania, with Blake Tushar as the primary point of contact for inquiries.

FLUID HANDLING DIVISION

POSTED

DEADLINE

BELT, VThis contract specifies the procurement of a BELT, V with NSN 3030-01-555-4750 and part numbers including 3590294, 3715973, 3715979, K080897, and MRP11068 from multiple suppliers including OSHKOSH DEFENSE LLC, Gates Corporation, and AMZ ALABAMA INC. The requirement is for 169 units to be delivered in 63 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes required. The product is classified as a TYPE I (CODE I) item with a non-extendable shelf life of 72 months. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The contract incorporates technical and quality standards referenced in the DLA Master List, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Covered defense information provisions and transportation guidelines as outlined in DLAD PROC NOTES C19 and C20 apply. Deliveries must be sent to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of July 14, 2026, and original delivery deadline of December 19, 2026. The unit of issue is each, with a unit price of $169.00, totaling $28,561. The solicitation number is SPE7L5-26-T-4605, issued by the Department of Defense under NAICS code 326220, with responses due by August 3, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

HOSE ASSEMBLY, NONMEThis contract is for the procurement of a nonmetallic hose assembly, identified by NSN 4720-01-509-2765 and part number 74B680067-135, with a quantity of eight units. The item is classified as a critical application component and must strictly comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with no government identification removed from non-accepted supplies and all items marked per physical identification guidelines. The use of Class I ozone-depleting chemicals is prohibited entirely, requiring approved substitutes if needed. Delivery is FOB origin to DLA Distribution San Diego, with a required delivery date of October 20, 2027, and a need ship date of October 7, 2027, under a 429-day acceptance delivery order. No quantity variance is permitted. Inspection and acceptance occur at the destination, and the unit of issue is each. The solicitation is a total small business set-aside under NAICS code 326220, issued by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Engineering and Reliability Support ServicesThe contract seeks aerospace engineering services focused on design control, reliability enhancement, lifecycle management, and obsolescence mitigation for critical components essential to aviation systems. The work is intended to ensure the continued performance, safety, and longevity of aerospace parts under demanding operational conditions, with an emphasis on proactive strategies to counteract component aging and supply chain disruptions. Technical expertise must encompass system-level analysis, engineering redesigns, and robust documentation practices aligned with industry and defense standards. This subcontract is issued by the Defense Logistics Agency Aviation, a division of the Department of Defense, and is set to expire with a response deadline of July 31, 2026. The contract’s NAICS code 541330 identifies it as part of the engineering services sector, and performance is expected to occur in Coffeyville. Although no specific set-aside provisions are indicated, the work will support defense-critical infrastructure, requiring a high degree of technical precision, compliance with defense protocols, and the ability to deliver tailored engineering solutions within a constrained timeline.

Engineering Services

POSTED

DEADLINE

Supply of Tubing and Conduit ComponentsThe contract calls for the supply of metal tubing and fittings engineered for use in aerospace hydraulic, fuel, and fluid systems, with mandatory inclusions of flaring, bending, and pressure testing to ensure performance and safety standards. All components must meet exacting industry specifications for use in high-stress, mission-critical airborne environments, and the work requires precision manufacturing capabilities to handle complex geometries and material requirements unique to aerospace applications. The scope emphasizes end-to-end fabrication and verification, ensuring each assembly is fit for immediate integration into aircraft systems without additional modification. This is a subcontract opportunity issued by the Department of Defense through DLA Aviation, with performance expected to be carried out in Coffeyville. The solicitation opened on July 24, 2026, and responses are due by July 31, 2026, at 9:00 p.m. Eastern Time. The North American Industry Classification System code 332812 identifies the category as Metal Service Centers and Other Metal Merchant Wholesalers, indicating the expectation for suppliers to provide either manufactured or value-added components beyond basic raw material distribution. Bidders must possess demonstrated experience in aerospace-grade fabrication and testing, and compliance with defense procurement standards is required, though no specific set-aside category is designated for this opportunity.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Supply of Springs and Spring ComponentsThe contract calls for the production of precision compression, extension, and torsion springs specifically designed for aerospace mechanisms where high reliability and consistent performance under extreme stress are critical. These components must meet stringent technical standards to ensure operational integrity in demanding environments, and the supplier is expected to deliver consistent quality with rigorous process controls and inspection protocols. All work must align with industry-specific aerospace requirements, emphasizing material suitability, dimensional accuracy, and fatigue resistance. The solicitation, posted on July 24, 2026, with a response deadline of July 31, 2026, is classified as a subcontract under NAICS code 332613, which pertains to spring and wire product manufacturing. The performance location is designated as S Coffeyville, and the contracting entity is DLA Aviation under the Department of Defense. No set-aside provisions are specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. The contract does not include a point of contact, but details can be accessed via the provided SAM.gov link for further submission guidelines and technical specifications.

Spring Manufacturing

POSTED

DEADLINE

Supply of Aerospace Fasteners (Bolts, Pins, Retainers)The contract seeks the supply of precision-machined aerospace fasteners including bolts, pins, retaining rings, and clips certified to military specifications AN, MS, and NAS for use in engine or airframe assemblies within defense systems. The work is classified as a subcontract under NAICS code 332721 and is managed by DLA Aviation under the Department of Defense. Respondents must submit proposals by the deadline of July 31, 2026, with the opportunity posted on July 24, 2026. Performance of the contract is required at a designated location in S Coffeyville, though no further address details are provided. The contract does not specify a set-aside status or point of contact, leaving potential bidders to engage directly through the official SAM.gov portal for full details and submission requirements.

Precision Turned Product Manufacturing

POSTED

DEADLINE

NSN 5855016187805, SPE4A7-26-R-0722, Housing Section, Night VisionThis procurement under solicitation SPE4A7-26-R-0722 seeks a single firm fixed price contract for 1,795 units of the Housing Section, Night Vision, identified by part number MPM-904-A4 and NSN 5855016187805, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The contract is subject to export control regulations, and only the approved source, Intelligent Manufacturing Solutions with CAGE code 6FQM4, is eligible to respond. Evaluation of submissions will consider price, past performance, and other factors outlined in the solicitation, with the award decision based on a comprehensive assessment. The solicitation is issued by the Defense Logistics Agency Aviation under the Department of Defense and is classified as a presolicitation, with no set-aside provisions applied. The North American Industry Classification System code is 334511, and the performance location is in Richmond, Virginia. All solicitation documents will be accessible exclusively through the DLA Internet Bid Board System, requiring Adobe Acrobat Reader for viewing, with no paper copies available. The solicitation is scheduled to be posted on August 10, 2026, and will close on September 10, 2026. Primary point of contact is Adrienne Davis, reachable via email and phone at the provided details.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Multiple NSNs for OEM Pratt & Whitney (Cages 52661/77445) for addition to sole source long term contractThe Defense Logistics Agency Aviation, through its office in Richmond, Virginia, is conducting market research to evaluate whether any alternative suppliers can provide 353 National Stock Numbers currently designated as sole source to Pratt & Whitney, under CAGE codes 52661 and 77445. These items are proposed for addition to the existing SPE4AX-24-D-9000 contract, which has approximately eight years remaining and already includes Pratt & Whitney as the sole provider for a range of parts and associated services including planning, forecasting, reliability enhancements, engineering maintenance, and design control. Although these 353 NSNs were not part of the original solicitation, the agency intends to pursue a sole source modification under FAR 6.302 unless market research reveals viable alternatives, in which case those items would be removed from the sole source designation. A Letter Request for Proposal will be issued exclusively to Pratt & Whitney if no competition is identified. Responses to this Sources Sought notice, due by July 31, 2026, must be submitted in Adobe Acrobat format, be unclassified, and not exceed 20 pages. The government explicitly states this notice is for information and planning purposes only, does not constitute a solicitation, and will not result in payment or a binding contract. The government reserves full discretion to accept or reject any response and will not be liable for any costs incurred by respondents or for the use of proprietary information provided. Interested parties may submit technical and capability information to demonstrate whether they can support the required NSNs, but any such submissions will be considered solely to assess the feasibility of competition. The point of contact for inquiries is Jennifer Snyder, with Cynthia Thomas as the secondary contact. The place of performance is Coffeyville, Oklahoma.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

16--BRACKET ASSEMBLY,EXTRAThe contract seeks procurement of the BRACKET ASSEMBLY, EXTRA with NSN 1670013538424 under solicitation SPE4A726T593L, with a total quantity of 85 units across three line items—83 units due in 272 days, one unit in 60 days, and another single unit in 239 days—all to be delivered to W1A8 DLA DISTRIBUTION in Richmond, Virginia. The solicitation is open to all responsible sources and requires electronic submission of quotes by the response deadline of July 31, 2026. This procurement is set aside exclusively for Women-Owned Small Businesses under NAICS code 314999, and the contracting office is part of the Department of Defense’s DLA Aviation. All inquiries must be directed via email to the designated point of contact, as no telephone or in-person contact information is provided, and further details are accessible through the SAM.gov portal using the solicitation number.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

59--INSULATION SLEEVINGThe contract solicitation seeks quotations for 100 feet of insulation sleeving with NSN 5970016681760, a qualified products list item required by NAVSURFWARCENT DET PICATINNY, with delivery due within 20 days after award. The solicitation, identified as SPE4A726T593S, is a combined RFQ posted on July 23, 2026, with a response deadline of July 31, 2026, and is open to all responsible sources who submit electronic quotes; hard copies are not available. The procurement falls under NAICS code 335932 and is managed by the Department of Defense through DLA Aviation in Richmond, Virginia. All technical specifications and standards must be obtained electronically, and submissions must be made via the SAM.gov portal using the provided link. Questions should be directed via email to the designated point of contact listed in the solicitation’s Block 5, with additional guidance available through the DIBBS website using the solicitation number for search purposes.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

61--CABLE ASSEMBLY,SPECThe contract seeks the procurement of 60 cable assemblies identified by NSN 6150015559768, with delivery required to W1A8 DLA DISTRIBUTION within 158 days after award. This is a source-controlled item, and only approved manufacturers—05593 with part numbers 300905-7632 and 30107632P2, and 94117 with part numbers 3107632P002 and 3107632P2—are authorized to supply the item. The specifications are governed by a detailed drawing referenced in the solicitation, and all supplied units must fully comply with its requirements. Digitized drawings and military standards均可 accessed electronically through official channels. The solicitation is issued as an RFQ under number SPE4A626T09JK, and responses must be submitted electronically by the deadline of July 31, 2026. The procurement is a total small business set-aside under NAICS code 334419, restricting eligibility to certified small business concerns. The contracting office is DLA Aviation, based in Richmond, Virginia, with inquiries directed to the designated point of contact via email. No hard copies of the solicitation are available, and all submissions must be received through the SAM.gov portal using the provided UI link.

Other Electronic Component Manufacturing

POSTED

DEADLINE

FY27-1B Foreign Bearing & Chinese Prohibited Waiver Package Sources Sought NoticeThis notice seeks viable domestic and foreign sources for specific bearing items identified by NSNs, with strict prohibition on sourcing from China in accordance with DFARS regulations 225.7009, 252.225-7016, 252.225-7007, and 225.770. The Department of Defense, through DLA Aviation, is evaluating alternatives to ensure compliance with statutory requirements mandating the use of non-Chinese manufactured components for these bearings. The solicitation applies to 14 specific bearing part numbers and requires potential suppliers to provide documentation supporting their source eligibility, including configuration control, part numbering, and source approval compliance. While technical data ownership remains with the original manufacturers and is not available for dissemination, procurement item descriptions will be provided upon request to assist potential respondents. Responses must be submitted by the deadline of August 7, 2026, and all proposals must adhere to applicable DOD contracting rules governing foreign source waivers and domestic sourcing preferences. The action is part of a broader effort to secure a compliant, resilient supply chain for critical defense components.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

58--PLATE,MOUNTINGThe U.S. Department of Defense through DLA Aviation is soliciting quotes for 45 mounting plates with NSN 5895017012637, to be delivered to Tobyhanna Army Depot in Pennsylvania under the delivery term of 5 days after award. The item is to be procured from the approved source 7QAK7 with part number 12272-3317-01. This solicitation, identified as SPE4A626T09HG, is posted as a combined RFQ with a response deadline of July 31, 2026, and is open to all responsible sources who submit timely electronic quotes. No hard copies of the solicitation are available and no specifications, plans, or drawings are provided. Responses must be submitted electronically via the SAM.gov link provided, and all inquiries must be directed to the designated buyer email. The procurement falls under NAICS code 334290 and originates from the Defense Logistics Agency Aviation office located in Richmond, Virginia.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

16--SHORT SHAFT ASSYThe contract is a solicitation for the procurement of one Short Shaft Assembly with NSN 1615012357920, to be delivered to DLA Distribution Warner Robins within 169 days after order award. The approved source for this item is identified as vendor code 97499 with part number 204-040-433-101. This is an electronic Request for Quote (RFQ) issued under solicitation number SPE4A5526T306Z, with no hard copies available; all quotes must be submitted electronically through the designated portal. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes provided they are received by the deadline. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, under a combined type solicitation with no set-aside classification. The NAICS code is 336413, and the procuring agency is DLA Aviation under the Department of Defense, managed from an office in Richmond, Virginia. Questions must be directed via email to the designated point of contact, with further details accessible through the SAM.gov workspace link or the DIBBS solicitation portal using the provided solicitation number.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE