Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Sealing Compound (NSN 8030010251692)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture or supply of one unit of a military-grade sealing compound identified by NSN 8030010251692, which must fully comply with all specified technical and performance requirements outlined in the contractual terms. The product is to be delivered FOB Destination to either Sasebo, Japan, or FPO AP 96322-1500, ensuring timely and secure transit to the designated military location. The solicitation is classified as a subcontract under NAICS code 325520, indicating it pertains to the manufacturing of other chemical products, and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 17, 2026, and is referenced through the award number SPE8ES24D0005 with delivery tracking under SPE8ES26F63MX. No set-aside provisions or specific point of contact details are provided, and the place of performance is not further detailed beyond the delivery destinations.

General Info

Supply one military sealing compound unit, FOB destination Japan or FPO, under DLA contract SPE8ES24D0005.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of one unit of military-grade sealing compound per NSN 8030010251692, compliant with contractual specifications and delivered FOB Destination to Sasebo, Japan or FPO AP 96322-1500.

Similar Contracts

Same NAICS industry code

ADHESIVEThis contract specifies the procurement of 40 units of a blue, thixotropic, single-component anaerobic adhesive conforming to MIL-S-46163A Type II Grade N, with a 250ML bottle size, under NSN 8040-01-663-4654. The adhesive is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition type. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. The item has a shelf life of 18 months, extendable per RS001 requirements for Type 2 items. Suppliers must provide Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) labels in compliance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing prior Material Safety Data Sheets (MSDS) requirements. Labels must align with either OSHA’s HCS or, if applicable, the Consumer Product Safety Act or Federal Hazardous Substance Act. Employees must be trained on the new SDS formats, labeling rules, and regulatory requirements. The solicitation, issued under SPE8ES-26-T-2447, is fully competitive under military specification and requires delivery within five days of award to Camp Pendleton, California. Proposals must be submitted by August 3, 2026, with inquiries directed to the designated point of contact at the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Sealing Compound Supply (CLIN 0002)The contract entails the supply of 24,000 kilotons of sealing compound, aligned with the same military and regulatory specifications established under CLIN 0001, ensuring consistency in quality and compliance across procurement lines. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 325520, which corresponds to the manufacturing of other chemical product and preparation products. The contract was posted on July 24, 2026, and is part of a broader effort to maintain standardized material specifications for critical defense applications. Although specific delivery locations and point of contact details are not provided, the place of performance and organizational address information are unspecified, suggesting logistics may be managed centrally or determined through subsequent directives. The contract remains accessible via the DIBBS system under the reference number SPE8ES26P1049.

Defense Logistics Agency

POSTED

DEADLINE

Sealing Compound Supply (CLIN 0001)The contract entails the supply of 2,000 kilotons of sealing compound compliant with military specifications and stringent hazardous material labeling requirements, ensuring it meets operational and safety standards for defense applications. The procurement is designated under CLIN 0001 and falls under NAICS code 325520, which corresponds to the manufacturing of other chemical products, reflecting the specialized nature of the compound. This is a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense, with the award posted on July 24, 2026. The place of performance and specific delivery details are not specified, but the contract requires adherence to all relevant federal and military regulations governing hazardous substances and industrial supplies. The contractual obligation is tied to the DLA’s procurement system, accessible via the provided DIBBS link, and serves logistical support for defense infrastructure or equipment maintenance.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Marking Materials Supply (Thermoplastic, Paint, Reflective Beads)The contract involves the supply of DOT-compliant materials for pavement markings along US-0087, specifically including traffic paint, thermoplastic, and retroreflective glass beads designed for high-visibility applications. These materials must meet all federal and state standards for durability, reflectivity, and safety to ensure optimal performance under varied environmental conditions. The procurement is structured as a subcontract under the NAICS code 325520, which pertains to paint and coating manufacturing, and is managed by the Texas Department of Transportation. All delivered materials must be certified for use on public roadways and aligned with current Texas transportation specifications to guarantee long-term visibility and adherence under heavy traffic loads. The solicitation was posted on July 24, 2026, with a response deadline set for August 18, 2026, at 4:00 PM. While details on set-aside status and point of contact are not provided, the contract is accessible through the Texas SmartBuy portal, indicating it is part of a streamlined procurement system used by state agencies. The place of performance is tied to US-0087, meaning materials must be deliverable to locations along this highway corridor, though specific mileage or segments are not outlined. Suppliers are expected to maintain strict quality control, provide documentation of compliance, and ensure timely delivery schedules to support ongoing road maintenance and safety initiatives by the Texas Department of Transportation.

Texas Department of Transportation

POSTED

DEADLINE

Whole Blood Collection and Transfusion Kit SupplyThe contract mandates the supply of 50 military-compliant whole blood collection and transfusion kits designed for field medical operations, with strict adherence to defense logistics standards and hazardous materials handling protocols. Each kit must maintain rigorous cold and dry preservation throughout the supply chain to ensure the viability of blood products under austere conditions, and all components must meet established Department of Defense specifications for durability, sterility, and operational readiness in combat zones. The placement of performance is designated to Camp Pendleton, California, and the vendor must be capable of fulfilling defense-grade logistics requirements, including secure transportation, inventory tracking, and documentation compliance. Submission deadline is July 29, 2026, with the solicitation issued under NAICS code 325520, which classifies the procurement within pharmaceutical and biological product manufacturing. This is a subcontract opportunity under the Medical Supply Chain MD Surg FSF, a division within the Department of Defense, and all respondents must demonstrate compliance with federal defense procurement regulations, including applicable safety and quality standards for medical materiel used in operational environments. The equipment must be configured for rapid deployment, with labeling and packaging conforming to military standards for use by field medics and forward surgical teams under extreme environmental conditions.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Carpet Tape Manufacturing and SupplyThe contract calls for the manufacture and supply of 63 roll units of carpet tape identified by NSN 8040-01-569-9157, adhering strictly to military standards for adhesives, packaging, and labeling. The product must meet all required specifications to ensure compatibility and performance in defense applications. The solicitation is classified as a subcontract under NAICS code 325520 and is managed by DLA Dist San Joaquin, a branch of the Department of Defense, with performance expected to be delivered to Tracy, California, at zip code 95304-5000. The opportunity was posted on July 23, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for interested parties to submit proposals. All submissions must comply with the specified technical and regulatory requirements to be considered for award.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Sealing Compound Supplier / ManufacturerThe contract is for the supply of a NSN-specific sealing compound in 11-gallon quantities, required to meet stringent military packaging, labeling, and hazardous material compliance standards. The sealing compound must be manufactured and delivered in full adherence to defense logistics protocols, ensuring consistent quality and regulatory alignment across all units of issue. This subcontract is issued under the NAICS code 325520, which classifies it within the industrial chemical manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. The product must be packaged, marked, and documented to satisfy federal hazardous materials regulations and military specification requirements, with no deviations permitted in formulation, container type, or handling procedures. Delivery and compliance are expected to occur in accordance with the terms defined by the agency, with performance obligations tied directly to military readiness and supply chain integrity.

Defense Logistics Agency

POSTED

DEADLINE

Epoxy Resin Manufacturing and SupplyThe contract requires the manufacture and supply of epoxy resin conforming to the BMS8-139 specification, adhering to military standards for performance, durability, and consistency. The work encompasses full production capabilities, rigorous quality control procedures throughout the manufacturing process, and initial packaging that ensures product integrity. Shelf-life management is a critical component, requiring precise labeling, storage conditions, and monitoring to maintain material viability from production through delivery and eventual use in defense applications. All activities must align with the stringent requirements of the Department of Defense to support mission-critical systems. Performance is designated at Tinker Air Force Base, Oklahoma, with the Defense Logistics Agency serving as the contracting authority under NAICS code 325520 for chemical manufacturing. The contract is structured as a subcontract with a solicitation response deadline of July 29, 2026, and was posted on July 23, 2026. Compliance with all technical specifications, documentation requirements, and defense supply chain protocols is mandatory, with an emphasis on reliability, traceability, and on-time delivery to meet operational needs. The product will be integrated into military-grade components requiring consistent material characteristics under extreme environmental conditions.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Adhesive Manufacturing and FormulationThe contract involves the manufacture and supply of a specialized, shelf-life-controlled, mercury-free military adhesive identified by NSN 8040-01-024-6991 and Part Number 2795574. The adhesive must fully comply with NAVSEA and OSHA hazardous material standards to ensure safety and performance in military applications. Production is required to meet strict formulation and quality controls to maintain consistent properties over the product’s designated shelf life, with all materials and processes adhering to environmental and occupational health guidelines. The solicitation is structured as a subcontract under NAICS code 325520, indicating classification within chemical manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The performance location is set at Yorktown, Virginia, with a response deadline of July 29, 2026. The contract seeks a supplier capable of producing this precise formulation at scale while maintaining all regulatory and functional specifications required for defense use.

Defense Logistics Agency

POSTED

DEADLINE

CARPET TAPEThe contract pertains to the procurement of carpet tape under NSN 8040-01-569-9157, with a quantity of 63 roll units, to be delivered within 256 days of award. The solicitation number is SPE8ES-26-T-2439, issued by the Defense Logistics Agency District San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, zip code 95304-5000. The contract is classified under NAICS code 325520 and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It incorporates cybersecurity compliance mandates, requiring the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization, and includes specific documentation obligations for source approval requests. The item is not required to have Item Unique Identification per customer direction, but it is subject to stringent export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons or entities, even within the United States. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and questionnaire. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation’s response deadline is July 29, 2026, with a posting date of July 23, 2026, and inquiries should be directed to Stephen Ockenhouse at dla-ts-fceb.inquiry@dla.mil.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

ADHESIVEThis contract specifies the procurement of an adhesive under solicitation SPE8ES-26-T-2434, with the NSN 8040-01-024-6991 and part number 2795574 from LOCTITE CORP. The product is supplied in 50 mL bottles, now sold in 12-packs, with a total quantity of 4 BT (bottles) required. Delivery is due within 20 days to the Navy Submarine Torpedo Facility in Yorktown, Virginia, FOB destination, with no variance allowed in quantity. The item is classified as a TYPE I (CODE F) with a non-extendable shelf life of six months and must be stored between 8°C and 21°C; deviations beyond this range may compromise product integrity. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging requirements. Hazardous material handling standards under OSHA's revised Hazard Communication Standard apply, requiring submission of Safety Data Sheets and compliant labels prior to award, along with employee training on these requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the adhesive, except for specified functional components like batteries or instruments as defined by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The item is subject to Covered Defense Information protocols, and shipment must be made via the fastest traceable means—parcel post is expressly prohibited. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List, with governing revision determined by the solicitation or award date depending on procurement scale.

Defense Logistics Agency

POSTED

DEADLINE

RESIN EPOXYThis contract specifies the procurement of a commercial off-the-shelf resin epoxy item identified by NSN 8040-01-695-3091 and part number BMS8-139, with a unit of issue in yards. The item is classified as a Type 2 (Code 3) shelf life item with a nine-month expandable shelf life and is designated as a critical application item, requiring strict adherence to packaging, marking, and handling standards. All supplies must meet DLA packaging requirements and be labeled and documented in compliance with the revised Hazard Communication Standard, including submission of Safety Data Sheets and HCS-compliant labels in accordance with 29 C.F.R. 1910.1200, along with employee training on these requirements. The product must be stored below 32 degrees Fahrenheit and shipped via fastest traceable means, explicitly excluding parcel post. The item must be delivered within five days to Tinker AFB, Oklahoma, under FOB destination terms with zero variance in quantity, inspected and accepted at the delivery point. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special marking code 33 indicating Type II shelf life compliance, and palletization must follow DLA packaging standards. The contract incorporates technical and quality requirements from the DLA Master List and references multiple military and federal standards including MIL-STD-147F, MIL-STD-129R, and Fed-Std-313F. The item is sourced from Pacific Coast Composites Inc. and Hexcel Corp, and the delivery deadline is July 27, 2026, with a required ship date to be confirmed. All documentation, labeling, and shipping procedures must align with DoD and OSHA regulations, and the buyer is specified as the Defense Logistics Agency under solicitation SPE8ES-26-T-2438.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Secure Transportation and Delivery to FPO AddressThe contract entails the secure transportation and delivery of hazardous polyurethane coating to the military postal address FPO AP 96607, with the contractor assuming full financial and operational responsibility for the shipment from origin to final destination. This includes compliance with all applicable safety, handling, and regulatory standards for hazardous materials, as well as bearing all costs and risks associated with transit, including potential delays, damage, or loss. The work falls under NAICS code 484220, classifying it as a specialized truck transportation service, and is issued as a subcontract through the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 26, 2026, with responses required by August 3, 2026, and performance is required at the specified FPO location with zip code 96607.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, and marking services for polyurethane coating in full compliance with MIL-STD specifications, as it is classified as a hazardous material. The work must adhere to all military standards for handling, containment, and identification to ensure safe transportation and storage within defense supply chains. This subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO address with ZIP code 96607. The NAICS code 561910 indicates the scope falls under other support services for waste management and remediation, reflecting the specialized nature of hazardous material handling. Bidders must submit proposals by the deadline of August 3, 2026, and are expected to demonstrate capability in meeting strict military regulatory requirements for hazardous materials. The solicitation, accessible via the provided DIBBS link, targets qualified subcontractors with proven experience in military-compliant packaging systems. While no set-aside type is specified, the contract supports the Department of Defense’s logistical needs and demands precise adherence to federal and military documentation, labeling, and safety protocols throughout the entire packaging lifecycle.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Qualified Polyurethane Coating Manufacturer (QPL-Approved)The contract requires the manufacture and supply of 187 units of a qualified polyurethane coating that meets military specifications for NSN 8010016525908, with the product required to be QPL-approved to ensure compliance with defense standards. The work is classified as a subcontract under NAICS code 325510 and is being managed by the Defense Logistics Agency under the Department of Defense, with performance expected to take place at an FPO address with the ZIP code 96607. The solicitation was posted on July 26, 2026, and responses must be submitted by August 3, 2026, indicating a short window for proposal submission. The contract is not subject to a specific set-aside classification, and the primary requirement centers on delivering a certified coating that aligns with established military quality and performance benchmarks for logistical use.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Small Business Subcontracting Support (Administrative)The contract seeks administrative support to ensure compliance with small business subcontracting requirements, specifically focusing on reporting and documentation for Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Small Disadvantaged Businesses. The work involves managing data collection, verifying eligibility, maintaining accurate records, and preparing submissions to meet federal reporting obligations tied to these programs. The task requires precision in tracking subcontractor classifications and ensuring alignment with regulatory standards to support the defense logistics mission. The contract is classified as a subcontract under NAICS code 541611 and is administered by the Defense Logistics Agency under the Department of Defense. Performance is to be conducted at a military postal address in FPO with ZIP code 96662. Responses are due by August 6, 2026, and the opportunity was posted on July 26, 2026. There is no set-aside designation specified, and no point of contact information is provided. The solicitation can be accessed through the DIBBS portal using the provided link.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Military Packaging and Preservation ServicesThe contract seeks providers to deliver comprehensive cleaning, drying, corrosion inhibition, and preservation packaging services for military shipments, strictly adhering to the standards outlined in MIL-STD-2073-1E. All work must ensure that defense-related items remain protected from environmental degradation during storage and transit, with procedures tailored to meet the rigorous demands of military logistics. The services are critical for maintaining operational readiness and require precise compliance with federal preservation protocols to safeguard equipment and supplies. This subcontract opportunity is issued by the Defense Logistics Agency under the Department of Defense, with performance required at FPO, ZIP 96662. The solicitation was posted on July 26, 2026, and responses must be submitted by August 6, 2026. The NAICS code 561910 identifies the scope as other support services for waste management and remediation, indicating the specialized nature of the preservation services required. Interested parties must be prepared to meet exacting quality and documentation standards, as non-compliance could result in rejection or contract termination.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the provision of hazard warning labels and safety data compliance for military shipments containing hazardous materials, ensuring adherence to both OSHA and Department of Defense standards. All labeling and documentation must meet rigorous regulatory requirements to safeguard personnel and maintain operational safety during the transport and handling of dangerous goods. The work is to be performed in support of Defense Logistics Agency operations, with performance centered at FPO, zip code 96662, indicating the scope includes global military logistics networks. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. Contractors must be prepared to deliver precise, up-to-date, and fully compliant safety materials that align with evolving federal and military safety protocols.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

PreRinse Spray Assembly Manufacturing and DeliveryThe contract requires the manufacture, testing, packaging, and delivery of a single PreRinse Spray Assembly identified by NSN 4510-01-198-4342, adhering strictly to applicable military specifications. The work must be completed and the unit delivered within a 20-day window from award, ensuring timely compliance with operational needs. The solicitation falls under the NAICS code 332913, indicating a focus on other fabricated metal product manufacturing, and is classified as a subcontract within the Department of Defense structure managed by the Defense Logistics Agency. The place of performance is designated as FPO with zip code 96662, reflecting a military postal address, and the response deadline is set for August 6, 2026, with the solicitation posted on July 26, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without restrictions based on business size or type.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 21 hours ago

DEADLINE

SENSING ELEMENT, FIRThe contract pertains to the procurement of a Sensing Element, FIR with NSN 6350375306236, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4850. Ten individual line items, each representing one unit at a unit price of $1.00, total a contract value of $10.00, with all deliveries required FOB destination within 20 days of the contract award. The material must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, commercial packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines. Hazardous materials must adhere to TQ requirement IP025. The delivery destination is USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with shipments required to be sent via traceable means using VSM and RDD 777, explicitly prohibiting parcel post. All items are to be inspected and accepted at the destination, with no quantity variance permitted. The supplier’s part numbers include CONSILIUM MARINE US INC 3EGT0 and CONSILIUM MARINE & SAFETY AB A188N, both referencing the same part number 90100040030-00A. The original required delivery date is July 22, 2026, and government-use-only fields indicate specific procurement tracking codes, including IPD, DIC, DIST, and ADV identifiers.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 21 hours ago

DEADLINE

SEALING COMPOUNDThe contract is for a sealing compound identified by NSN 8030-01-672-3450 and part number LOCTITE SI 595, supplied in 2.7-ounce clear containers, with a shelf life of 12 months extendable under Type 2 Code 4 requirements. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking, and specific packaging codes for hazardous materials under IP025. Each unit is packaged in a single transaction unit (TU) and must be delivered FOB destination within 20 days to the specified address in Gulfport, Mississippi. The product is subject to strict traceability requirements, prohibiting parcel post, and must be shipped via documented methods with marked tracking. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The sealing compound is classified as a hazardous material requiring particular handling, labeling, and documentation per DLA protocols, and the contract includes a zero variance on quantity with inspection and acceptance occurring at the delivery point. The procurement is part of a federal solicitation issued by the Defense Logistics Agency under SPE8ES-26-T-2445, with a response deadline of August 3, 2026, and an original required delivery date of July 28, 2026.

Wood Preservation

POSTED

about 21 hours ago

DEADLINE

HARNESS ASSEMBLY, MASK,The contract is for one unit of a harness assembly, mask, oxygen, identified by NSN 4240-01-392-6079 and part number 460-190-457, supplied by Interspiro Inc based in Branford, CT. Delivery is required within 20 days from the contract award, with shipment to be made FOB origin and delivered to the specified address in Gulfport, MS. The item must be packaged in strict accordance with MIL-STD-2073-1E, using packaging method 10, and labeled in compliance with MIL-STD-129 without special marking. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contract terms allow. All packaging, marking, and shipping of this non-hazardous item must follow applicable DLA procedures, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination point, with no variance allowed in quantity—exactly one unit is required. The contract is issued under solicitation SPE8E6-26-T-3869 by the Defense Logistics Agency and incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The item is procured using the DoD authorized unit of issue, and all government identification must be removed from non-accepted supplies. The contract includes specific transportation and shipping instructions tied to DLA procedural notes, and delivery must be achieved by the original required date of July 28, 2026. The point of contact for inquiries is John Lieb, and the procurement falls under NAICS code 339113. The item is designated for government use only, with associated control codes and identifiers applied for internal tracking and logistics coordination.

Surgical Appliance and Supplies Manufacturing

POSTED

about 21 hours ago

DEADLINE

MARKER, IDENTIFICATIONThis contract specifies the procurement of 3 packaging units (PG), with each unit containing 25 identification markers, totaling 75 units, under NSN 7690-01-320-2613 and part number Z-PSR8 from American Labelmark Company. The item is classified as a TYPE I (CODE H) with a non-extendable 12-month shelf life, requiring strict compliance with MIL-STD-129 for marking and packaging in accordance with MIL-STD-2073-1E. Packaging must avoid plastics as wrapping, cushioning, or dunnage materials, and must adhere to DLA’s packaging requirements. Delivery is to be made FOB origin within 10 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means, excluding parcel post, to a designated Army airfield in Fort Hood, Texas, under RDD 555 and project code TP 2. Special marking is not required, and the contract incorporates all applicable technical and quality standards from the DLA Master List of Requirements. Government use identifiers and shipping metadata are provided, and the contract is issued under solicitation SPE8E6-26-T-3863 with a required delivery date of July 22, 2026.

POSTED

about 21 hours ago

DEADLINE

FLOAT, VALVEThe contract specifies the supply of a FLOAT, VALVE with NSN 4820015106023, with a single unit required under two CLINs, each for one EA at a unit price of $1.00. Delivery is due within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance performed at the final delivery point. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The destination is the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with vessel shipment procedures and DLA transportation notes C19 and C20 applying. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in specific items like batteries, fluorescent lamps, instruments, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical specifications and mandates compliance with all applicable defense logistics standards. The original required delivery date is July 22, 2026, solicitation number is SPE7MC-26-T-154Q, and the responsible contracting office is under the Defense Logistics Agency with primary point of contact Paula McClary.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE