Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Sealing Compound (NSN 8030012905138)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the supply and delivery of 17 kilotons of sealing compound identified by NSN 8030012905138, with full responsibility for proper packaging and labeling to meet military specifications. All goods must be shipped under FOB destination terms to Yokota Air Base in Japan, placing the burden of transportation risk and cost on the contractor until the material is received at the designated location. The procurement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 325998 indicating it falls under other chemical product and preparation manufacturing. The contract was posted on August 7, 2026, and the performance address is specifically tied to Yokota Air Base, requiring precise logistics coordination to fulfill the delivery requirements on time and in full compliance with military standards.

General Info

Supply 17 kilotons of sealing compound to Yokota Air Base under FOB destination, per military specs.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 17 kilotons of sealing compound conforming to NSN 8030012905138, including packaging, labeling, and FOB destination shipping to Yokota Air Base, Japan.

Similar Contracts

Same NAICS industry code

CLEANING COMPOUND, SOLV

Solicitation # SPE4A5-26-T-336W

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-4165

Defense Logistics Agency

POSTED

DEADLINE

Supply of Highway Flares (Standard Fusee #9340-A)The contract requires the supply of 300 cases per year of DOT-compliant highway flares designated as Standard Fusee #9340-A, each featuring a 30-minute burn time and a red coloration with a wire leg stand for secure placement. The flares must be packaged in cases of 36 units each, ensuring consistent and efficient handling and distribution. Delivery is to be made on an as-needed basis directly to the Saint Louis County Police Department, accommodating fluctuating operational demands without a fixed schedule. The agreement falls under the NAICS code 325998 for other chemical product and preparation manufacturing and is structured as a subcontract, with a response deadline of September 3, 2026. The sourcing is managed by Saint Louis County Government in Missouri, with performance taking place within the county jurisdiction, and all flares must meet federal transportation safety standards to ensure reliability and compliance during emergency use.

Saint Louis County Government

POSTED

DEADLINE

Chemical Corrosion Inhibitor SupplyThe contract entails the supply and delivery of military-specification Fluid Film corrosion inhibitor, identified by NSN 6850013871131, packaged in 11 3/4 oz bottles with twelve bottles per case, intended for use at Naval Station Rota in Spain. The product is classified under NAICS code 325998 and is being procured as a subcontract under the oversight of the Defense Logistics Agency within the Department of Defense. The award was posted on August 7, 2026, and the performance location is specifically tied to the U.S. naval installation in Spain, ensuring the corrosion inhibitor meets the operational and environmental demands of maritime and military equipment maintenance in that region. No set-aside provisions or specific point of contact details are provided, and the contract is referenced through the DIBBS system under the contract and delivery order identifiers SPE4AX16D9010 and SPE4A726FZ982.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Molybdenum Disulfide (Lubricant)The contract entails the procurement and delivery of 3,000 bottles of Molybdenum Disulfide lubricant, a specialized industrial lubricant used in high-stress mechanical applications, under strict regulatory compliance standards. All packaging and labeling must meet DFARS requirements, ensuring adherence to federal defense acquisition regulations related to sourcing, material traceability, and country-of-origin labeling. The delivery is designated as FOB Destination to Ramstein Air Base in Germany, meaning the seller assumes all transportation risks and costs until the goods are officially received at the specified military installation. The contract falls under NAICS code 325998 for other chemical product and preparation manufacturing and is structured as a subcontract under the Defense Logistics Agency, part of the U.S. Department of Defense, reflecting its role in supporting critical military logistics and equipment maintenance operations.

Defense Logistics Agency

POSTED

DEADLINE

Sealing Compound Supply and DeliveryThe contract mandates the procurement and delivery of exactly one kiloton of military-grade sealing compound identified by NSN 8030013647366 to a Department of Defense facility located in Groton, Connecticut. The delivery is subject to FOB destination terms, meaning the supplier bears all risks and costs until the product is physically received at the specified DoD location. The sealing compound must be delivered with full traceability, ensuring each unit can be tracked from manufacture to final receipt to meet stringent military supply chain requirements. The contract falls under the NAICS code 325998 for other chemical product and preparation manufacturing and is classified as a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense. The posting date of the contract opportunity is August 7, 2026, and while specific delivery timelines and performance milestones are not detailed here, compliance with federal procurement standards and military specifications for material quality and documentation is implied.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Military-Grade Sealing Compound (NSN 8030016201558)The contract pertains to the manufacture or supply of 5,000 kilotons of military-grade sealing compound compliant with NSN 8030016201558 specifications, intended for delivery to a naval vessel. The item is classified under NAICS code 325998, indicating it falls within the category of other chemical product and preparation manufacturing. The contract is structured as a subcontract and is managed by the Defense Logistics Agency under the Department of Defense, with the posting date listed as August 7, 2026. The place of performance and specific delivery location are not defined in the provided details, and no point of contact or set-aside information is specified. The contract is accessible via a DIBBS portal link for award records, suggesting it is part of an official U.S. military procurement tracking system.

Defense Logistics Agency

POSTED

DEADLINE

Molding Compound SupplyThe contract entails the supply of 4,000 kilograms of Molding Compound identified by NSN 8030002298735 to Barksdale Air Force Base in Louisiana, with a firm delivery deadline of August 21, 2026. The material must be packaged, labeled, and shipped in full compliance with all applicable military standards to ensure compatibility with defense logistics systems and operational requirements. This is a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 325998 for other chemical product and preparation manufacturing. The transaction is managed through the DIBBS system with the contract identifier SPE8ES26F77SA, and all fulfillment must align with federal procurement protocols for defense-related materials.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Sealing Compound (NSN 8030013834993)The contract entails the procurement, proper packaging, and FOB destination delivery of one case of military-grade sealing compound identified by NSN 8030013834993 to a U.S. military installation located in Germany. The item must meet stringent military specifications to ensure reliability and performance under operational conditions, and the delivery must be completed to the specified overseas location with all shipping responsibilities fulfilled by the vendor up to the point of arrival at the destination. The work is structured as a subcontract under the broader procurement efforts of the Defense Logistics Agency, falling under NAICS code 325998 for other chemical product and preparation manufacturing. The contract was posted on August 7, 2026, and is part of ongoing logistics operations to support U.S. military readiness abroad, with the endpoint of performance firmly established at the German installation, adhering to FOB destination terms that place risk and cost responsibility on the supplier until formal receipt at the final location.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Sealing Compound NSN 8030013647363The contract specifies the supply and delivery of 7,000 kilotons of military-grade sealing compound identified by NSN 8030013647363, with strict requirements for compliant packaging, accurate labeling, and fully traceable freight delivery under FOB Destination terms, ensuring the product reaches its designated location with full accountability. The procurement is governed under NAICS code 325998 and falls under the purview of the Defense Logistics Agency within the Department of Defense, indicating its critical role in military logistics and readiness. This is a subcontract awarded on August 7, 2026, and is linked to the primary contract SPE8ES24D0005 with delivery identifier SPE8ES26F77UC, suggesting integration into a larger defense supply chain. Though details such as point of contact, physical address, or set-aside classification are not provided, the emphasis on traceability and compliance underscores the sensitivity and operational importance of the sealing compound in defense applications. Delivery obligations adhere to FOB Destination, placing responsibility for transit risks and costs squarely on the supplier until the goods are received at the final destination.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Chemical Corrosion InhibitorThe contract requires the supply and delivery of 2,000 boxes of a military-grade chemical corrosion inhibitor identified by NSN 6850014375687 and part number 91002 160Z to USCG Base Honolulu, Hawaii. The item is classified under NAICS code 325998, indicating it falls under other chemical product and preparation manufacturing. This is a subcontract issued by the Defense Logistics Agency under the Department of Defense, with the award posted on August 7, 2026. The place of performance is specifically designated for the U.S. Coast Guard base in Honolulu, and while no solicitation number or set-aside details are provided, the contract is formally linked through the DIBBS system with the contract number SPE4AX16D9010 and delivery order SPE4A726FZ00B. All units must meet military specifications for corrosion inhibition and be delivered in full compliance with defense logistics standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Antiseize Compound (NSN 8030002921102)The contract encompasses the procurement and delivery of ten units of military-specification antiseize compound, identified by NSN 8030002921102, for use aboard a naval vessel stationed at a forward operating location. The item must fully comply with Defense Federal Acquisition Regulation Supplement standards and be packaged in accordance with Defense Logistics Agency requirements to ensure durability, traceability, and operational readiness under demanding environmental conditions. This subcontract, issued under the NAICS code 325998, is administered by the Department of Defense through the Defense Logistics Agency and is intended to support critical maintenance and operational functions aboard naval assets in austere operational theaters. Delivery must be completed to the specified forward location in alignment with military logistics protocols, with no additional set-aside designation or solicitation number provided, indicating a direct fulfillment under an existing prime contract vehicle.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

DEADLINE