Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Texas was posted on August 16, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply of Shower Shoes (Non-Slip, Large Sizes)

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 316210
New
Federal
Safety Boots Follow-On for Fort Riley, KS
Solicitation # W911RX27RA001
Solicitation W911RX27RA001 is a Small Business Set Aside for the procurement of safety and muck boots for Department of Public Works employees at Fort Riley, Kansas. This Firm Fixed Price contract includes a base year and four option years, extending the period of performance through May 31, 2032. All footwear must comply with ASTM F2413-18 standards for impact, compression, and electrical hazard protection, with a specific emphasis on complete waterproofing, slip resistance, and durability against chemical and environmental hazards. The contractor is required to provide a minimum 12-month commercial warranty and must adhere to strict timelines for fit-related exchanges within 15 business days and defective replacements within 14 calendar days. A critical requirement for this contract is that the vendor must operate a permanent brick-and-mortar storefront within a 75-mile radius of Fort Riley, open at least five days a week, to provide certified fitting services for a wide range of sizes. Mobile units and pop-up stations are strictly prohibited. Award decisions are based on technical capability and past performance, which are significantly more important than price. Technical evaluation focuses on the storefront location, fitting expertise, and sizing capabilities, while past performance is assessed based on recency, relevancy, and quality within NAICS 316210. Invoicing and payments will be managed monthly through the Wide Area Workflow system.
W6QM Micc-Ft Riley

POSTED

5 days ago

DEADLINE

in 21 days
NAICS: 316210
New
DIBBS
BOOTS, DIVERS'
Solicitation # SPE8E5-27-Q-0050
Solicitation SPE8E5-27-Q-0050 is a small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one pair of divers boots, identified by NSN 4220-01-441-3827. The requirement specifies a firm fixed price and identifies acceptable part numbers from Aqualung USA, Inc (BS187014039) and Action Plus (1032-SZ.7). The item is classified as a critical application item with a non-extendable shelf life of 36 months and must adhere to technical data package Rev A Gen1 and basic drawing 30003 3462AS107 Revision D. Delivery is required within 30 days after receipt of order, with a required delivery date of September 11, 2026, shipping to the USNS Carl Brashear T-AKE 7. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, including specific marking per MIL-STD-129 and the use of opaque, waterproof, and greaseproof bags to protect the item from ultraviolet rays. Environmental restrictions prohibit the use of asbestos, class I ozone-depleting chemicals, and the intentional addition of mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding safeguarding covered defense information, cybersecurity reporting, and the Buy American Act. Quotations must be submitted to the issuing office in Philadelphia by November 17, 2026.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 8 days
NAICS: 316210
DIBBS
RETAINER, SHIPPING AND
Solicitation # SPE8ED-27-T-0183
Solicitation SPE8ED-27-T-0183 is for the procurement of 226 vertical twistlock stackers, identified as shipping and storage container retainers under NSN 8145016234025. The requirement is split into two line items: 74 units for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania and 152 units for delivery to DLA Dist San Joaquin in California. These forged housing components must be hot dipped galvanized and meet specific load requirements, including a minimum tension breaking load of 50 metric tons, a shear breaking load of 40 metric tons, and a compression load of 100 metric tons. Delivery is required within 56 days after receipt of order, with an original required delivery date of March 24, 2027. The contract specifies that inspection and acceptance will occur at the destination. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system. The acquisition is governed by NAICS code 316210 and includes various federal regulations, such as the Buy American Act, Berry Amendment, and specific cybersecurity requirements for safeguarding covered defense information. Sourcing may require specialized casting and forging tooling, for which the government provides assistance requests through DLA channels.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

11 days ago

DEADLINE

in about 4 hours

AI Contract Overview

Show more

Tarrant County in Texas is seeking a subcontractor for the supply of durable, non-slip shower shoes intended for inmate use within its facilities. The procurement specifically requires footwear in large, extra-large, and 2XL sizes to ensure proper fit and safety. This opportunity was posted on August 16, 2024, with a response deadline of September 9, 2024. The contract falls under NAICS code 316210, focusing on the manufacturing of footwear.

General Info

Tarrant County seeks a subcontractor for durable, non-slip inmate shower shoes by September 9.

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of F2024183.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Annual Contract for Inmate Hygiene Supplies

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas → Tarrant County
ContactsNo contacts available
OfficeN/A
Organization / AgencyTexas → Tarrant County
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provision of non-slip, durable shower shoes in large, extra-large, and 2XL sizes for inmate use in Tarrant County facilities.

More opportunities from Texas → Tarrant County

Same awarding agency

NAICS: 333993
SLED
Purchase of Cardboard Baler
Solicitation # F2027043
Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.
Packaging Machinery Manufacturing

POSTED

17 days ago

DEADLINE

in 14 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS