Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Single-Use Protective Spectacles

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of single-use, latex-free, non-sterile protective eyewear in bulk packaging, specifically designed to meet federal safety and labeling standards. The product must comply with all applicable regulatory requirements for personal protective equipment intended for use in medical or industrial settings where eye protection is necessary but sterile conditions are not required. Suppliers are expected to deliver the eyewear in quantities sufficient for bulk distribution, with all packaging and labeling accurately reflecting product specifications, material composition, and compliance certifications. This is a subcontract under the Department of Defense’s Medical Supply Chain, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF office, with performance required at the specified location in Annville, Pennsylvania, 17003-5003. The solicitation, categorized under NAICS code 339920 for other medical and dental equipment and supplies, was posted on July 28, 2026, and responses are due by August 3, 2026. The procurement is open to eligible subcontractors who can meet technical specifications, quality assurance standards, and delivery timelines without requiring sterile or custom configurations, focusing instead on cost-effective, high-volume production and adherence to federal regulations.

General Info

Supply latex-free, non-sterile protective eyewear in bulk to meet federal safety standards for DoD medical supply chain in Annville, PA.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339920 - Sporting and Athletic Goods ManufacturingView NAICS

Place of Performance

ANNVILLE, PA, 17003-5003, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of single-use, latex-free, non-sterile protective eyewear in bulk packaging, compliant with federal safety and labeling standards.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E9-26-Q-0635

The contract specifies the procurement of 17,500 units of ear muffs with NSN 4240-01-469-8738 under solicitation SPE8E9-26-Q-0635, with a firm delivery deadline of 60 days after award. All supplies must comply with DLA packaging requirements detailed in RP001 and MIL-STD-2073-1E, including specific packaging methods, containment materials, and unit container specifications. The items are to be delivered FOB origin and inspected and accepted at destination, with no tolerance for quantity variance. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries or sensors, and any permitted mercury-containing devices must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Packaging and marking must follow MIL-STD-129 without special codes, and palletization must adhere to the DLA RP001 standard. Hazardous material shipping procedures are governed by DLAD PROC NOTE C19 and C20, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The government’s material need date is set for September 30, 2026, and the point of contact for inquiries is Luis Marrero, with the solicitation response deadline on August 5, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Musical Instrument Supply – Professional Baritone SaxophonesThe contract pertains to the procurement of five Yamaha YBS-82 Custom Professional Baritone Saxophones, each to be delivered with full manufacturer warranty and official certification, ensuring authenticity and high-performance standards. All instruments must be packaged in compliance with required specifications to guarantee safe transport and preservation of condition upon delivery. The procurement is classified as a subcontract under NAICS code 339920, indicating it involves the manufacturing of musical instruments. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, at 2:00 PM. The place of performance is designated as Millington, Tennessee, with a ZIP code of 38054, and the contracting organization is the Naval Supply Systems Command Fleet Logistics Center Norfolk under the Department of Defense. The contract aims to support military or institutional musical programs requiring top-tier professional equipment.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 21 hours ago

DEADLINE

Disadvantaged Business Enterprise (DBE) Subcontracting CoordinationMetra is seeking certified Disadvantaged Business Enterprises (DBE), Minority Business Enterprises (MBE), or Women Business Enterprises (WBE) to serve as subcontractors in support of manufacturing, testing, and fabrication activities under a federal compliance initiative aimed at meeting participation goals for underrepresented businesses. The opportunity is tied to NAICS code 339920, which covers other miscellaneous manufacturing, and requires subcontractors to contribute directly to project scopes that involve production, quality assurance, and component fabrication. Interested certified firms must submit their responses by August 21, 2026, with no solicitation number provided, and the opportunity is open through the BonfireHub platform. There is no specific location designated for performance, and no point of contact details are listed, indicating that all communications and submissions must go through the designated online portal. The effort aligns with federal and state equity objectives, and participation is contingent on valid DBE, MBE, or WBE certification status.

POSTED

DEADLINE

Passenger Seat Cushion Manufacturing and AssemblyThe contract involves the fabrication and assembly of railcar seat cushions for Metra, requiring precise manufacturing processes including foam cutting, application of silicone toppers, upholstering with cotton duck fabric, and final assembly to comply with Federal Railroad Administration and original equipment manufacturer standards. All work must meet rigorous safety, durability, and comfort requirements specific to passenger rail applications, ensuring consistency and reliability across the fleet. Bids are due by August 21, 2026, with the solicitation posted on July 28, 2026, under the NAICS code 339920 for other transportation equipment manufacturing. The work is classified as a subcontract and will be performed in Illinois, though the exact location is not specified. Interested parties must submit proposals through the Metra BonfireHub portal by the deadline to be considered for award.

POSTED

DEADLINE

Tactical Gear and Equipment SupplyNorthside ISD is seeking suppliers to provide tactical gear and equipment essential for law enforcement personnel, including body armor, duty belts, holsters, handcuffs, flashlights, and associated accessories. The contract is structured as a subcontract under NAICS code 339920, which pertains to other sporting and athletic goods manufacturing, indicating a focus on specialized protective and operational equipment. The solicitation was posted on July 28, 2026, with a firm response deadline of August 20, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. The place of performance and agency office details are unspecified, but the contracting entity is located in Texas. Only interested parties with the capability to meet stringent quality and delivery standards for law enforcement-grade gear should pursue this opportunity, as compliance with performance expectations is critical. The contract lacks details on set-asides, point of contact information, or specific volume requirements, suggesting that bidders must clarify these aspects directly through the provided portal link.

POSTED

DEADLINE

Specialized Rescue Manikin SupplyThe contract calls for the manufacture and delivery of two specialized articulated rescue training manikins designed to closely mimic human form and weight distribution for realistic emergency response training. Each manikin features a durable vinyl exterior over a reinforced steel frame, with anatomically accurate weighting to replicate the center of gravity and mass of an actual person during rescue operations. The design ensures durability under repeated use and simulation of challenging rescue scenarios such as vertical lifts, confined space extractions, and waterborne rescues. The contract is classified as a subcontract under NAICS code 339920 for other medical equipment and supplies, issued by the Department of Defense through the Medical Supply Chain FSH. Offers must be submitted by August 4, 2026, with performance expected to be delivered to a military postal address in FPO with ZIP code 96657-2615. The solicitation was posted on July 28, 2026, and the requirement is intended for use in defense training programs where realistic, high-reliability manikins are essential for preparing personnel in life-saving procedures under demanding conditions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Aircraft Washer Mat (NSN 5310015622686)The contract calls for the manufacture or sourcing and delivery of 84 standardized aircraft washer mats identified by NSN 5310015622686, fully compliant with DLA specifications and applicable military standards. These components are critical for aircraft maintenance operations and must meet rigorous performance, material, and dimensional requirements dictated by defense procurement guidelines. The effort is classified as a subcontract under NAICS code 339920, indicating it falls within other miscellaneous manufacturing, and the delivery location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, allowing a seven-day window for interested parties to submit proposals. The award is managed by the ASC Commodities Division under the Department of Defense, with no set-aside provisions indicated, meaning all eligible vendors may compete. The contract’s operational context suggests the washer mats are part of routine logistics replenishment or maintenance support for military aviation assets, and timely delivery will be essential to maintain operational readiness. All participants must ensure complete adherence to technical and compliance criteria outlined by DLA to qualify for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Material Packaging and Labeling ServicesThe contract requires the provision of packaging and labeling services for hazardous medical materials in strict adherence to federal and military standards, specifically MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. All work must ensure the safe handling, identification, and transportation of regulated medical substances, with attention to durability, legibility, and compliance with Department of Defense specifications for hazard communication and chain-of-custody tracking. The services are intended to support military medical logistics operations and must be performed to guarantee alignment with standardized markings and packaging protocols used across defense healthcare supply chains. This subcontract is issued under NAICS code 339920 and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The place of performance is designated as APO 96319-5024, indicating operations will be conducted at a U.S. military postal location, likely serving overseas or deployed medical units. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, requiring interested parties to submit proposals within this narrow timeframe. All bids must demonstrate proven capability in handling hazardous medical materials under federal regulations and show familiarity with military packaging and labeling requirements specific to combat zone and expeditionary medical environments.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and labeling of fasteners in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, requiring full adherence to military-grade packaging protocols including barcoding and special marking requirements. All work must ensure the integrity, traceability, and readiness of fasteners for Department of Defense use, with packaging designed to withstand handling, storage, and transportation under operational conditions. The place of performance is designated as Portsmouth, Virginia, with the delivery address specified as 23709-1001, and the work is expected to align with the NAICS code 339920 for other miscellaneous fabricated metal product manufacturing. Responses are due by August 5, 2026, and the opportunity is posted as a subcontract under the ASC Commodities Division of the Department of Defense. The solicitation does not specify a set-aside type or organization type, and no point of contact information is provided, but interested parties must access the official portal via the provided DIBBS link to obtain full details and submit proposals. The contract emphasizes technical precision and regulatory compliance, making qualification and experience in military packaging standards essential for eligibility.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Military-Grade Photographic Equipment CasesThe contract calls for the manufacture and delivery of two units of military-grade photographic equipment cases, identified by NSN 6760014912686, adhering strictly to all applicable military packaging and labeling standards to ensure compatibility with defense logistics systems. The equipment must meet rigorous durability and protection requirements suitable for operational environments, with the final products destined for performance at Fort Bliss, Texas, under the oversight of the Department of Defense through the Construction & Equipment T & IFO EQ organization. Submissions are due by August 10, 2026, with the solicitation originally posted on July 28, 2026, under a subcontract classification. The NAICS code 339920 indicates this work falls under the manufacturing of other sporting and athletic goods, encompassing specialized protective cases. The contract is not subject to any specific set-aside provisions, and interested parties must respond through the designated DIBBS portal, as no point of contact information has been provided in the notice. Compliance with federal military specifications for packaging, marking, and documentation is mandatory for award consideration.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Manufacture of Adult Rubber Synthetic Shower ShoesThe contract calls for the full-scale manufacturing of adult-sized shower shoes crafted from black synthetic rubber, featuring a cross strap design and non-slip soles to meet rigorous durability and safety standards. Production must fully comply with Department of Defense technical specifications, including RA001 for material properties, MIL-STD-2073-1E for packaging and storage procedures, and MMS NO. 1 for military medical supply standards. The items are intended for use within the military medical supply chain and must be produced to exacting military-grade quality with consistent performance under demanding conditions. The solicitation is classified as a subcontract under NAICS code 339920, with a response deadline of August 4, 2026, and is managed by the Medical Supply Chain FSH under the Department of Defense. Performance is required at Fort Bliss, Texas, with a ZIP code of 79918-2527, indicating the final destination for delivery and distribution. Although no specific set-aside designation is provided, the requirement is open to qualified subcontractors capable of meeting all technical, packaging, and delivery obligations as specified by military standards. The contract is accessible through the DIBBS platform for qualified bidders.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Military-Grade Packaging and Packing Materials SupplyThe contract pertains to the supply of specialized packing retainers identified by part numbers 705-D-7586 and 914-07597-000, which are critical components in military logistics packaging designed to securely hold and stabilize items during transit. These retainers are engineered to meet stringent military standards, ensuring the integrity of sensitive equipment and supplies throughout the supply chain under demanding operational conditions. The requirement is issued as a subcontract under the NAICS code 339920, indicating the focus on other fabricated metal product manufacturing, and is managed by the Land Supply Chain organization within the Department of Defense. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and performance is to be carried out at FPO, ZIP code 96667, typically associated with military postal operations. The contract does not specify a set-aside category, implying it is open to general competition among qualified subcontractors. The procurement is conducted through the DIBBS platform, and potential bidders must ensure compliance with technical specifications for the packing retainers, delivery timelines, and military packaging protocols to meet operational readiness requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

THERMOMETER KIT, CLINIC

Solicitation # SPE2DS-26-T-283F

The contract specifies the procurement of two electronic clinical thermometer kits designed for human use, each equipped with a battery-powered digital display, predictive temperature measurement capabilities ranging from 89.6 to 107.6 degrees Fahrenheit, and powered by a 1.55 VDC button-type battery offering 200 hours of continuous operation. Each unit includes a wallet-type holder and a sleeve containing five disposable plastic probe covers for oral and axillary temperature readings. The units must be individually sealed in protective packaging to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible cost to the designated delivery point in Jacksonville, Florida. All items must be marked in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NSN 6515-01-331-7295 with a 20-day delivery requirement and is governed by technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced under RA001, RP001, and RQ011. The solicitation number is SPE2DS-26-T-283F, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with bids due by August 4, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-283C

The contract specifies the procurement of 2 packages, each containing 10 disposable tracheal tubes, for a total of 20 units, under NSN 6515-00-105-0815. Each tube has a 10.0 mm internal diameter, is 32 cm in length, features a radiopaque design for visibility under imaging, and includes an inflatable low-pressure high-volume cuff requiring a syringe for inflation and deflation. The tubes are sterile, intended for nasal or oral intubation, and designed as replacement tubes for tracheal anesthesia sets with a standard 15 mm connector. All units must be individually sealed in suitable containers to protect against damage and packaged in commercial shipping containers compliant with international carrier standards, ensuring safe delivery to APO 09604-6180 within 20 days of award. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, superseding all references to MIL-STD-129, with technical and quality requirements referenced from the DLA Master List. Bidders are required to supply the exact source and part number, and the procurement is governed by the solicitation SPE2DS-26-T-283C, issued by the Department of Defense’s Medical Supply Chain, with responses due by August 4, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

BRUSH, BRISTLE, DENTAL H

Solicitation # SPE2DS-26-T-284M

The contract specifies the procurement of a dental handpiece bristle brush designed for polishing around tooth necks and embrasures of plastic dentures, with a disk diameter of 0.719 to 0.781 inches and a stiff bristle composition mounted on a mandrel. The unit of issue is a package containing twelve brushes, and the item is identified by NSN 6520-01-056-7376 with a single-package quantity requested under purchase request 7017660470. Delivery is required within 20 days after award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-284M, was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339114 for dental equipment manufacturing, with performance and contact details centered at FPO with point of contact Olusola Emmanuel.

Dental Equipment and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

VALVE, RESUSCITATOR

Solicitation # SPE2DS-26-T-283W

The valve resuscitator is a barrier system featuring three separate filtration layers and a one-way duck bill valve with ports on both the top and bottom, designed for adjustable pressure settings between 5 and 20 cm H2O. It includes a standardized 22mm ID connector compatible with any resuscitation bag flow diverter that has a 22mm connection and is individually packaged for sterile use. The unit of issue is a box containing ten units, each with a shelf life of sixty months. To ensure product integrity, no more than nine months may have passed from the manufacturer’s date to the delivery date to the government. The product is identified by NSN 6515-01-620-0444, with a purchase request for two boxes, requiring delivery within twenty days of award. Technical and quality specifications referenced under RA001, packaging requirements per RP001, and procedures for removing government identification from non-accepted supplies under RQ011 are governed by the DLA Master List of Technical and Quality Requirements. The solicitation is issued under contract number SPE2DS-26-T-283W, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain through the Office of Elizabeth Cruz, with performance directed to APO 09094-3219.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

LASER LEVELING DEVICE

Solicitation # SPE2DS-26-T-283D

The LASER LEVELING DEVICE is a specialized component designed for use with the CODMAN CSF EXTERNAL DRAINAGE SYSTEM, featuring a reusable bubble level and a Class 2 laser lamp to ensure accurate alignment during medical procedures. It is supplied as a single unit with the NSN 6515-01-612-7325, and the requirement is for one unit to be delivered within 20 days of award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders must clearly indicate the source and part number being offered. The solicitation, issued under SPE2DS-26-T-283D, has a response deadline of August 4, 2026, with performance to be delivered to APO 09094-3219. The procurement falls under NAICS code 334511 and is managed by the Department of Defense through its Medical Supply Chain division, with Patrick Esposito serving as the primary point of contact.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-283H

The contract is for a medical-grade, hypoallergenic ear plug item designated as PLUG,EAR with NSN 6515-01-606-4565, supplied in a unit of issue of one box containing twenty-five pairs. All units must be sealed in individual protective containers to prevent damage or breakage, and packed into commercial shipping containers suitable for safe transport by common carriers at the lowest possible rate to the delivery point at Fort Harrison, Montana, with a delivery deadline of twenty days after order placement. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and markings must be applied accordingly. Packaging and labeling requirements are governed by DLA’s technical and quality standards referenced in the DLA Master List, with applicable revisions determined by the solicitation or award date. The item is subject to DLA’s packaging requirements and procedures for removing government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-283H, issued on July 29, 2026, with responses due by August 4, 2026, under NAICS code 334511, representing medical device manufacturing, and is being procured by the Department of Defense’s Medical Supply Chain under the office of MD Surg FSF. Primary point of contact is Chandler Alvarez at Chandler.Alvarez@dla.mil or 267-608-7058.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-284N

These are triple-flange pre-molded earplugs made from ABS and elastomeric polymer, designed for comfort across a wide range of ear sizes with a one-size-fits-most configuration that requires no rolling or insertion. The earplugs are washable and reusable, reducing both environmental waste and long-term costs. They offer a Noise Reduction Rating of 25 dB and meet CSA Class AL standards for hearing protection. Each unit is supplied in a carrying case to maintain cleanliness and ensure easy access for repeated use. The product is issued in boxes of 50 pairs, with a total quantity of 10 boxes requested under purchase request 7017660494. Delivery is required within 20 days of award. The NSN is 6515-01-362-0300, and the contract solicitation number is SPE2DS-26-T-284N, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 339112. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with applicability determined by the solicitation issue or award date depending on procurement scale. Packaging must comply with DLA standards, and non-accepted supplies must not bear government identification. The point of contact for the solicitation is Allen Costello, with responses due by August 4, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

CUFF SET, SPHYGMOMANOME

Solicitation # SPE2DS-26-T-283K

The contract specifies the procurement of two units of a small adult size aneroid cuff set for a sphygmomanometer, each including an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free cuff with a certified aneroid gauge accurate to within ±3 mm Hg, backed by a five-year warranty. The device is designed to withstand drops from up to 30 inches in height, meeting AAMI standards, and is reusable. Technical and quality requirements are governed by the DLA Master List, with packaging, labeling, and disposal of non-accepted supplies subject to specific DLA directives. The unit of issue is each, and bidders must clearly state the source and part number being supplied. The NSN is 6515-01-648-3774, with delivery required within five days of award. The solicitation, issued under SPE2DS-26-T-283K, was posted on July 29, 2026, with responses due by August 4, 2026, and falls under NAICS code 339112 for medical equipment manufacturing. Performance and delivery are to be fulfilled to Melrose, Massachusetts, under the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

KIT, PERFORMANCE QUALIF

Solicitation # SPE2DS-26-T-284S

This contract specifies the procurement of a Performance Qualification Kit for Electrochemiluminescence (ECL) use with the MSD PR2 Model 1800, comprising ten plates and associated reagents. The item is classified as a Type I (Code H) product with a non-extendable shelf life of twelve months and must be stored at room temperature. It is regulated by the FDA, and bidders are required to clearly state the source and part number being supplied, with the manufacturer identified as Meso Scale Diagnostics LLC under part number ECL-PR2-PQ. The National Stock Number is 6550-01-694-0651, and the unit of issue is a single kit. The contract mandates strict adherence to commercial packaging standards as outlined in MEDICAL MARKING STANDARD NO. 1, which supersedes MIL-STD-129, and all packaging must ensure protection against damage during transit. The material must be marked per the specified standard and palletized in compliance with DLA packaging requirements. Delivery is required within five days of contract award, with FOB destination and zero variance allowed on quantity. The inspection and acceptance points are both at the destination, and the shipment must be sent to the specified APO address with an alternate freight shipping address in Yokota AB, Japan. The contract references DLA technical and quality requirements incorporated by reference, including RS011, RP001, and RQ011, and applies all medical acquisition packaging rules. The solicitation number is SPE2DS-26-T-284S, with a response deadline of August 4, 2026, and the required delivery date is July 31, 2026. The contracting office is under the Department of Defense, Medical Supply Chain MD Surg FSF, with Tiffany Parker as the primary point of contact. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and DLA procedural notes for transportation and delivery.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 16 hours ago

DEADLINE

PAD, POST SURGICAL, O

Solicitation # SPE2DS-26-T-284E

The contract pertains to the procurement of post-surgical obstetrical pads designed with a poly backing for enhanced leakage protection, supplied in packages containing 12 bags of 14 pads each for a total of 168 pads per package. The item is identified by NSN 6510-01-585-7696 and is required in a single package quantity under purchase request 7017673964, with delivery expected within 81 days after order. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to DLA packaging standards, guidelines for removing government identification from non-accepted supplies, and potential coverage under the Covered Defense Information policy. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-284E by the Department of Defense’s Medical Supply Chain MD Surg FSF, has a response deadline of August 4, 2026, with performance to be delivered to APO, 09227-0000, and primary contact is Seth Tootell via email and phone.

Corrugated and Solid Fiber Box Manufacturing

POSTED

about 16 hours ago

DEADLINE

DELIVERY KIT, OBSTETRIC

Solicitation # SPE2DS-26-T-284V

The Delivery Kit, Obstetrical is a disposable medical kit designed for normal deliveries in emergency and ambulance settings, containing essential items including one pair of gloves, one drape sheet, two umbilical cord clamps, two obstetrical towels, one disposable scalpel, one OB pad, one receiving blanket, six gauze sponges, one bulb syringe, four disposable towels, two nylon tie-offs, two alcohol preps, two twist ties, and one plastic bag. Each unit must be sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe transport at the lowest cost to the specified delivery point. All materials must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be clearly labeled with the manufacturer date, expiration or retest date, and contract or lot number. The kit has a mandatory 24-month shelf life, with no more than three months allowed to have passed from the date of manufacture to delivery to the government, and labeling must adhere to the latest revision of MMS1A. The product is identified by NSN 6515-01-343-2145, with a quantity of one unit, and must be delivered within five days of award under solicitation SPE2DS-26-T-284V, with performance directed to APO 96328-5225. Bidders must provide the source and part number and comply with all technical and quality requirements referenced in the DLA Master List.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-283Z

The contract specifies the procurement of a STETHOSCOPE SYNERGY DUAL-FREQUENCY, DUAL HEAD model featuring a bell-diaphragm design with a floating diaphragm and plastic construction. It includes a long black tube connecting the chest piece to the aural tubes, a pair of snap-on polyurethane rims for both the diaphragm and bell, and one pair of eartips. The unit must be packaged in a sealed container capable of protecting it from damage or breakage, and shipped in commercial exterior containers suitable for secure delivery via common carrier at the lowest possible rate to the designated point of delivery. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers must ensure compliance by accessing the current standard via the DLA Troop Support website. The unit of issue is each, and the item is identified by NSN 6515-01-314-6694 with a quantity of one unit per order and a total demand of two units. Bidders are required to provide the source and part number being supplied. The solicitation number is SPE2DS-26-T-283Z, with a response deadline of August 4, 2026, and delivery must occur within 20 days of award. The procurement falls under NAICS code 339112 and is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with delivery to APO 09094-3219. Technical and quality requirements referenced in the DLA Master List must be followed, with the applicable revision determined by the solicitation issue date or amendment date for large acquisitions.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE