Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Specialized Metals and Silicon Components for C-17 Controllers

Active

Federal

Response Deadline11/20/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves the supply of raw materials and precision-machined components for US Air Force C-17 aircraft spares projects. The scope of work includes providing aerospace-grade metals for connectors and controller casings, high-purity silicon for circuit cards, and specialized materials for circuit card attachments. All delivered materials must include certifications that meet strict military and aerospace standards. The contract is categorized under NAICS code 325211 and was posted on November 4, 2026, with a response deadline of November 20, 2026. The primary objective is to support prime contractors by ensuring a steady supply of high-specification metals and silicon components necessary for the maintenance and production of C-17 controller systems.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

325211 - Plastics Material and Resin Manufacturing

Place of Performance

0, OK, 73145, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-27-R-0110.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTROLLER, ENGAGING, NSN # 6615013462155, PN# 478300-04-01

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 09:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw materials and precision-machined components for prime contractors on US Air Force C-17 aircraft spares projects. Provides aerospace-grade metals for controller casings and connectors, high-purity silicon for circuit cards, and specialized materials for circuit card attachments. Provides material certifications meeting military and aerospace standards. Delivers raw materials and machined components.

Similar Contracts

Same NAICS industry code

Supply of Preformed Packing O-Rings

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Polyethylene Specimen CupsThis subcontract involves the manufacture and supply of non-sterile, nesting-type polyethylene plastic specimen cups for prime contractors under Department of Defense DLA supply contracts. The required products are 86.0 ounce round-bottom cups featuring snap-on covers and custom inscriptions for date, name, room number, and location side. All items must strictly adhere to Medical Marking Standard No. 1 and MIL-STD-2073-1E packaging requirements. Managed by the Medical Supply Chain FSH, the contract requires the delivery of physical specimen cups to specified destinations with reporting handled via the Wide Area Workflow system. The performance location is designated as FPO 09566-4008, and the procurement falls under NAICS code 325211.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

Supply of Mercury-Free Bonding Materials and ElastomersThis subcontract involves the supply of mercury-free bonding materials and elastomers for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the delivery of high-grade mercury-free epoxy, vulcanizing agents, and vibration damping materials. To ensure compliance and safety, the provider must supply all necessary Material Safety Data Sheets and hazard warning labels to certify that the chemical agents and raw materials are mercury-free. The opportunity is categorized under NAICS code 325211 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026, at 8:30 PM. This contract focuses on the procurement of certified chemical agents essential for specialized defense mechanical projects.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Modified Bitumen Roofing Material SupplierThis subcontract opportunity is for a Modified Bitumen Roofing Material Supplier to provide membranes, primers, flashing materials, and associated installation supplies for prime contractors working on Department of Veterans Affairs facility projects. The selected supplier is responsible for the procurement and delivery of all specified roofing materials to the John Cochran VA Medical Center, ensuring that all products strictly adhere to published commercial specifications and project drawings. Managed by the Department of Veterans Affairs Network Contract Office 15, this opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 325211. Interested parties must submit their responses by November 13, 2026, to be considered for the provision of these essential construction materials.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 11 hours ago

DEADLINE

Solicitation # N4215827QE005

The Norfolk Naval Shipyard in Portsmouth, Virginia, intends to award a firm-fixed-price contract to Ecomass Technologies LP on a sole source basis for the procurement of Ecomass Compound 4702ZB92 Nat. This material is a non-toxic thermoplastic lead alternative consisting of a technical polymer with a filled polyurethane base resin. It is specifically designed to provide critical radiation attenuation during the packaging, transportation, and storage of highly contaminated reactor plant hardware. The procurement is categorized under NAICS code 325211 and PSC code 8030, with a size standard of 1250 employees. As Ecomass Technologies LP is the original equipment manufacturer of this proprietary composite, the government is pursuing a sole source award. While this notice is not a formal request for competitive proposals, responsible sources may submit a written capability statement providing evidence that competition would be advantageous to the government. The action is designated as a total small business set-aside.

Norfolk Naval Shipyard Gf

POSTED

about 11 hours ago

DEADLINE

Micro Surfacing Material SupplierThis subcontract agreement establishes a partnership for the supply of a specialized micro surfacing blend to prime contractors working on road projects within Chemung County, New York. The selected supplier is responsible for the manufacturing and delivery of a specific mixture comprising asphalt emulsion, crushed aggregate, and chemical additives, ensuring that all provided materials strictly adhere to the minimum quality and material requirements outlined in the solicitation. The opportunity was posted on November 4, 2026, with a response deadline of November 19, 2026. Operating under NAICS code 325211, the contract focuses on the production and logistical delivery of the completed surfacing materials to support county infrastructure improvements.

POSTED

about 18 hours ago

DEADLINE

Latex-Free Medical Polymer SupplyThis subcontract, titled Latex-Free Medical Polymer Supply, involves the provision of raw, medical-grade, and latex-free materials to prime contractors supporting Department of Defense medical supply contracts. The scope of work focuses on delivering high-purity, biocompatible polymers, specifically silicone or thermoplastic elastomers, in formats appropriate for fabrication or molding. To ensure safety and regulatory compliance, the supplier must provide Material Safety Data Sheets and Certificates of Conformance verifying the latex-free composition of all materials. Managed under the Medical Supply Chain MD Surg FSF agency, the contract is categorized under NAICS code 325211. The place of performance is designated as FPO 09566-4008. Interested parties should note the posting date of November 3, 2026, with a response deadline set for November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Critical Application O-Ring SupplierThis subcontract opportunity with the DLA Weapons Support Land Supply Chain involves the procurement of 509 high-specification O-Rings, specifically NSN 5331010060303, for critical applications. The selected supplier must manufacture or source these components from a distributor or manufacturer listed on the Performance Review Institute Qualified Manufacturer List or Qualified Products List to ensure full compliance with PRI standards. Additionally, the supplier is required to certify that all provided items are asbestos-free. The contract is categorized under NAICS code 325211 and is managed by the Department of Defense. Performance for this contract will take place in Albany. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Coated Plastic Strip with Pressure-Sensitive AdhesiveThis subcontract involves the manufacture and supply of coated plastic strips featuring pressure-sensitive adhesive, intended for prime contractors supporting DLA Troop Support aviation components for F101 and F-4 aircraft. The required strips must be 4 inches wide, 36 yards long, and 0.014 inches thick, adhering strictly to the DLA Master List RA001 and complying with MIL-STD-129, ASTM D3951, and FED-STD-313 standards. The contract requires the delivery of 15.833 rolls on a FOB Origin basis to DLA Distribution San Diego. Managed under NAICS code 325211 for the Department of Defense, the procurement process includes a response deadline of November 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLASTIC STRIP, PRESSURE

Solicitation # SPE8E9-27-T-0440

Solicitation SPE8E9-27-T-0440 is a small business set-aside request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment MRO SVC I. The procurement is for a coated plastic strip with pressure-sensitive adhesive, measuring 4 inches wide, 36 yards long, and 0.014 inches thick. This critical application item is intended for use with F101 and F-4 aircraft. The requirement consists of 15.833 rolls, with a need ship date of February 16, 2027, and an original required delivery date of March 8, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The contract incorporates strict technical and quality requirements via the DLA Master List and specifies that palletization must follow RP001. Packaging must adhere to MIL-STD-129 for marking and labeling, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025 per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Quotes must be submitted via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Natural Latex Resistance BandsThis subcontract involves the supply of professional-grade natural latex rubber resistance bands for prime contractors working on projects for the Government of Canada's Department of National Defence. The required products must meet commercial-grade standards, featuring a specific length of 41 inches plus or minus 0.3 inches and spanning a variety of resistance levels ranging from 9 to 95 lbs. The contract is categorized under NAICS code 325211, with the place of performance located in Ontario, Canada, excluding the National Capital Region. Interested parties must adhere to the timeline established by the posting date of November 3, 2026, with a final response deadline of November 16, 2026.

Department of National Defence

POSTED

DEADLINE

Supply of 15 Mil Detail Paint and Reflective Glass BeadsThis subcontract involves the supply of specialized 15 mil detail paint in white and yellow, along with compatible reflective glass beads, for parking lot projects within the City of Brandon, Mississippi. All materials must adhere to the 2024 Mississippi Standard Specifications for State Aid Road and Bridge Construction, specifically Sections S-619 or S-621. The selected provider is responsible for delivering the required quantities of paint and reflective additives directly to the prime contractor or designated project sites. This procurement is managed under the agency MPTAP with a response deadline of November 6, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Modification Kit, AI (NSN: 1650-01-732-4221) Supplier

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Preservation, Packaging, and Shipping for F100 SparesThis subcontract involves providing specialized preservation, packaging, and shipping services for F100 spares to support prime contractors delivering DLA supply contracts. The scope of work requires the application of anti-corrosion coatings and vacuum sealing in accordance with military standards, specifically focusing on MIL-SPEC packaging for aerospace components. The selected provider will manage all logistics and shipping to ensure the secure delivery of preserved parts to Tinker AFB in Oklahoma. Successful execution of this contract requires comprehensive knowledge of military shipping and receiving regulations to meet the strict requirements of the Department of Defense and the Ok DLA Aviation At Oklahoma City.

Packing and Crating

POSTED

about 11 hours ago

DEADLINE

Quality Assurance, Inspection, and Testing for F100 ComponentsThis subcontract involves providing quality assurance, inspection, and testing services for F100 components to support prime contractors delivering DLA supply contracts for the Department of Defense. The selected provider will perform independent dimensional inspections, material testing, and final quality assurance in strict accordance with the Engineering Data List and Qualification Requirements. Technical execution requires the use of non-destructive testing equipment and Coordinate Measuring Machines to ensure all certified components and inspection reports meet rigorous standards. To be eligible for this engagement, the contractor must maintain AS9100 certification. The project is categorized under NAICS code 541380 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must submit their responses by November 12, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Precision Manufacture of F100 Spare Part P4078845This subcontract involves the precision manufacture of spare part P4078845 for the F100 platform, supporting prime contractors who deliver supply contracts to the Department of Defense via DLA Aviation at Oklahoma City. The scope of work includes the procurement of raw materials and the use of precision CNC machinery to perform machining and fabrication in strict accordance with the Engineering Data List and Qualification Requirements. The contractor is responsible for delivering between 7 and 1,500 aerospace-grade units and completing all necessary Source Approval Request packages. This effort falls under NAICS code 336412, with a response deadline set for November 12, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Steel Sphere SupplyThe Precision Steel Sphere Supply subcontract involves the sourcing and fabrication of raw or semi-finished industrial steel spheres for prime contractors supporting DLA Aviation projects. The scope of work requires the production of 14-inch spheres that must adhere to PN 472555-4 material specifications, with a specific focus on quality testing for structural integrity and wall thickness to ensure the components can withstand required pressure levels. Managed under the Department of Defense through DLA Aviation at Oklahoma City, this requirement falls under NAICS code 332111. The contract focuses on the delivery of unfinished or semi-finished components to be used in larger aviation projects, with performance centered in the 73145 zip code area.

Iron and Steel Forging

POSTED

about 11 hours ago

DEADLINE

Aircraft Fire Extinguisher Fabrication (PN 472555-4)This subcontract involves the manufacture of specialized aircraft fire extinguishers for C-17 aircraft engine nacelles, supporting prime contractors on DLA Aviation projects. The scope of work includes the fabrication of steel sphere housings, the integration of triggering mechanisms and fire suppression agents, and the application of Item Unique Identification markings. All finished products must strictly adhere to NSN 1680015954096JY and PN 472555-4 specifications. To be eligible for this contract, providers must hold OEM status or possess a valid licensing agreement with Kidde Technologies, Inc. The project is managed under NAICS code 336413 for the Department of Defense via DLA Aviation in Oklahoma City. Interested parties must submit their responses by November 20, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing and Assembly of Engaging Controllers (C-17)This subcontract involves the full assembly and manufacturing of Engaging Controllers for US Air Force C-17 aircraft spares projects. The scope of work includes fabricating controller housings, integrating switches and circuit cards, and ensuring all units meet strict physical dimensions, weight requirements, and IUID marking compliance. The selected provider must be capable of obtaining necessary manufacturing data from BAE Systems Controls, Inc. to ensure the successful delivery of the completed controllers. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the project falls under NAICS code 334220. Interested parties must adhere to the response deadline of November 20, 2026. The contract focuses on high-precision aerospace manufacturing to support the operational readiness of C-17 aircraft.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Crating Services

All Other Support Services

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace-Grade Steel and Aluminum Stock

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Assembly of Landing Gear Control Assembly

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Aerospace-Grade Alloy SupplyThis subcontract for Aerospace-Grade Alloy Supply supports prime contractors on DLA Aviation projects under the Department of Defense. The scope of work involves the sourcing and delivery of certified aluminum and steel alloys provided in the form of bars, billets, or sheets. To maintain strict material traceability, the provider must supply all necessary Material Test Reports and Certificates of Conformance. The opportunity is associated with NAICS code 336413 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must respond by November 20, 2026, to be considered for the delivery of these certified raw material stocks.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Machined Aluminum and Steel Pump ComponentsThis subcontract opportunity with the Department of Defense, specifically for DLA Aviation in Oklahoma City, involves the production of precision-machined aluminum and steel pump components. The scope of work includes the milling, turning, and grinding of aerospace-grade alloys to create housings, gears, and internal components for prime contractors. Deliverables consist of machined pump components and sub-assemblies that meet tight tolerances, including necessary surface finishing and deburring. Qualified providers must hold AS9100 or ISO 9001 certification to ensure adherence to aerospace quality standards. The project falls under NAICS code 332710. Interested parties must submit their responses by November 20, 2026, following the posting date of November 4, 2026.

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Sterile Trauma Dressings (Compress and Bandage)

Defense Logistics Agency

POSTED

DEADLINE

Special Purpose Electrical Cable Manufacturer/Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sealing Grade Raw Materials

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Critical Application Gasket Supply (NSN 5330011402817)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of O-Rings (NSN 5331014668430)

Defense Logistics Agency

POSTED

DEADLINE

Medical-Grade PVC-Coated Aluminum Supply

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS