Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Stud, Shouldered and Stepped (NSN 5307-00-598-3209)

Active

Federal

Response Deadline11/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 78 precision-manufactured shouldered and stepped studs, identified by NSN 5307005983209, to support prime contractors fulfilling Defense Logistics Agency Weapons Support contracts. All components must be produced or sourced in strict accordance with the DLA Master List of Technical and Quality Requirements. Production may be carried out using precision machining or additive manufacturing equipment, though the use of additive manufacturing specifically requires ESA approval. The contract falls under NAICS code 332722 and is managed through the Department of Defense.

General Info

Subcontract for 78 precision studs for DLA, following strict technical and quality requirements.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-7375.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD, SHOULDERED AND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-manufactured shouldered and stepped studs for prime contractors delivering DLA Weapons Support contracts. Manufactures or sources NSN 5307005983209 per the DLA Master List of Technical and Quality Requirements. Utilizes precision machining or additive manufacturing equipment. Requires ESA approval for additive manufacturing. Delivers 78 units of shouldered and stepped studs.

Similar Contracts

Same NAICS industry code

HARDWARE (HEX HEAD CAPSCREWS & BOLTS)

Solicitation # SPMYM327Q2002

The Portsmouth Naval Shipyard, under DLA Maritime, is soliciting quotes for various commercial hardware items, specifically hex head capscrews and heavy hex bolts, under solicitation SPMYM327Q2002. The requirement includes specific items such as 5/8-11UNC-2A capscrews, zinc-coated self-locking capscrews, and heavy hex bolts conforming to standards including ASTM A193 B16, ASTM B633 Type-2, MIL-DTL-18240 Type-N, and QQ-N-286G. This procurement is a 100% Small Business Set-Aside under NAICS code 332722. The government required delivery date is December 3, 2026, with shipping terms set as FOB Destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must be active in the System for Award Management (SAM) and provide CMMC unique identifiers if applicable. Strict packaging and marking requirements are in place, mandating compliance with MIL-STD-129 for military items and ASTM D-3951 for commercial items, while prohibiting the use of asbestos and loose fill polystyrene. Quality evidence, including test results and material certifications, must accompany each package. Invoices are to be submitted via Wide Area Workflow (WAWF) with payment terms of Net 30 days after material acceptance. Quotes are due by November 4, 2026, at 11:00 AM EST.

DLA Maritime - Portsmouth

POSTED

about 3 hours ago

DEADLINE

Solicitation # N0010426QFG16

Solicitation N0010426QFG16 is issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of seven machine bolts, designated as Special Emphasis material due to their use in crucial shipboard systems. The items must be manufactured from ASTM-A193 Grade B7 material and conform to Leslie Controls Inc. drawing 21844N. Due to the critical nature of the hardware, the contract mandates stringent quality assurance, including quantitative chemical and mechanical analysis, liquid penetrant or magnetic particle inspection per T9074-AS-GIB-010/271, and thread inspection according to FED-STD-H28. The award will be made to a single responsible offeror based on a combination of price and past performance, with past performance weighted as the more important factor. The contract is a DO-rated order for national defense use under the Defense Priorities and Allocations System. Deliveries are FOB Destination to the Portsmouth Naval Shipyard in Kittery, Maine, with a final delivery deadline of 365 days after the contract's effective date. Key administrative requirements include the use of the Wide Area Workflow (WAWF) for invoicing and the submission of certification data for review and acceptance prior to shipment. The contractor must maintain a quality system compliant with ISO-9001 and provide a Certificate of Compliance per CDRL DI-MISC-80678. Government Quality Assurance will be performed at the source, and the contractor is required to provide one additional fastener per heat/lot for traceability purposes. The solicitation close date is November 24, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

SCREW,CAP,HEXAGON H

Solicitation # N0010427QYA45

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, seeks the manufacture and delivery of one unit of a hexagon cap screw, identified by NSN 5305-01-608-8552 and Cage Code 96169 reference number 92-08-1250. The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The government retains an option to order an additional quantity up to 100 percent of the original order for 365 days after receipt at the same price. Delivery is required within 180 days, with shipping terms set as FOB Destination, specifically to a receiving officer in Pearl Harbor, Hawaii. The contractor is responsible for all inspection and quality assurance at the origin, with a requirement to maintain inspection records for 365 days following final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and ASTM D3951-18 for domestic shipments. Payment and invoicing will be processed electronically through the Wide Area Workflow system. Award evaluation will be based on item, price, and supplier risk as assessed via the Supplier Performance Risk System. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization from the OEM to be considered for the award.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 2 months

53--NUT,SELF-LOCKING,HE

Solicitation # N0010425QBV19

Solicitation N00104-25-Q-BV19 is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the procurement of self-locking nuts (NSN 5310-01-486-7558). The award will be granted to the responsible offeror who provides the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. The delivery period is set at 300 days with FOB Destination terms. Technical compliance is governed by the Individual Repair Part Ordering Data (IRPOD) and Technical Data Package version 009, and the contractor must adhere to strict quality assurance and inspection systems acceptable to the Government. Packaging and marking are critical requirements, with domestic shipments requiring Level B packing and overseas shipments requiring Level A or B depending on the transport method, all in accordance with MIL-STD-2073-1 and MIL-STD-129. The contract includes a DO priority rating for national defense and mandates the use of the Wide Area WorkFlow (WAWF) system for all invoicing and receiving reports. Offerors must submit a completed Standard Form 33, Section B schedule, and Section K representations via email or NECO. Additionally, the procurement prohibits the intentional use of mercury and requires compliance with the Federal Acquisition Supply Chain Security Act and various Buy American Act certifications.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 1 month

53--SCREW,MACHINE

Solicitation # N0010426QYAHV

NAVSUP Weapon Systems Support Mechanicsburg is soliciting the procurement of 71 machine screws for sub antenna systems under NSN 1H-5305-010877548-SQ. This emergency acquisition is intended for a one-year duration with deliveries destined for DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. While the government intends to solicit full and open competition, the current source is identified as the Original Equipment Manufacturer and the only known provider capable of satisfying the requirements due to a lack of government-owned data. The procurement follows FAR Part 15 procedures and includes UID and Buy American requirements. Interested parties must submit capability statements or proposals via electronic procedures on NECO. The solicitation is expected to be issued around September 3, 2026, with a response deadline of October 3, 2026, and an anticipated award date of October 18, 2026. This effort is designated as a total small business set-aside.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

about 18 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Plain Hexagon Nuts (NSN 5310-00-268-6055)This subcontract involves the manufacture and supply of 492 precision-manufactured plain hexagon nuts, identified by NSN 5310-00-268-6055, for prime contractors supporting DLA Weapons Support ASC projects. The hardware must be produced in strict accordance with NASM316 and FF-N-836F(1) specifications, with a mandatory requirement for zero mercury content and bare item marking compliant with MIL-STD-130N. The selected provider must adhere to the Buy American Act and provide a Certificate of Quality Compliance for the shipment. Delivery of the components is designated as FOB Origin to DLA Distribution Cherry Point, North Carolina. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supply of L3 Technologies Screw AssortmentsThis subcontract involves the supply of 274 units of L3 Technologies, Inc. screw assortment kits, part number OFB-2080-A1, for prime contractors supporting the DLA Weapons Support ASC. The performance of this contract takes place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The supplier must adhere to strict quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Full compliance with the DLA Master List of Technical and Quality Requirements is mandatory for the fulfillment of this order.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Concession Services – Tracy, CA

Solicitation # NAFUA1-26-R-0003

The Defense Logistics Agency is soliciting proposals under solicitation NAFUA1-26-R-0003 for cafeteria and mobile food truck services at the Defense Distribution Depot San Joaquin in Tracy, California. This is a revenue-generating concessionaire contract where the contractor provides all labor, management, and equipment to operate two cafeterias in Building 100 and Building 16, a mobile food truck, and general catering services for over 1,200 personnel. In exchange for operating these facilities, the contractor will pay the Nonappropriated Fund Instrumentality either a monthly concessionaire fee or a percentage of gross sales, whichever is greater. The period of performance consists of a two-year base period from December 30, 2026, to December 29, 2028, with eight subsequent one-year option periods. Proposals are due by November 2, 2026, at 3:00 PM EST and must be submitted in two separate volumes covering commission percentages, financial capabilities, and operational plans. Award selection is based on the best overall value, with primary emphasis placed on the feasibility of the business plan, relevant past performance, and menu innovation. Contractors must adhere to strict food safety and packaging standards, including compliance with Tri-Service Food Code and Army Regulations, and ensure all food handlers are inoculated against Hepatitis A. Eligible offerors must maintain active registration in the System for Award Management and provide a unique entity identifier.

Food Service Contractors

POSTED

about 3 hours ago

DEADLINE

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Identification Marker SupplierThis subcontract involves the supply of seven identification markers, NSN 7690-01-693-4155, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected supplier is responsible for the fabrication and assembly of these markers in strict accordance with TDP Rev A Gen 1 and REFERENCE QAP 13873. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-2073-1E along with RP001 DLA Packaging Requirements for packaging. Additionally, the provider must provide valid manufacturer and distributor codes to fulfill the requirements of this Department of Defense procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 22 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 22 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Warning Streamer Pin (Ground Safety Pin) Manufacturer

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320011035794)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310017379732)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Close Tolerance Screw Supply (NSN 5305012848385)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Bearing Retaining Nuts (NSN 5310-01-317-9957)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Washers (NSN 9515-01-555-3719)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310014799261)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Critical Safety Item (CSI) Socket Head Cap Screws

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supplier of Serrated Lock Rings (NSN 5365-00-762-1908)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Manufacture and Supply of Shear Bolts (NSN 5306-00-364-9063)

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NSN 5305011325205)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS