This Government Contract opportunity from Pennsylvania was posted on January 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Used 40/53-ft Flatbed Trailers

Closed

State & Local

Submission Closed01/29/2026, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336211

New

DIBBS

SHOCK ABSORBER, LEVER AThe contract specifies the procurement of 111 units of a lever-action shock absorber with a coil spring, identified by NSN 2510-01-528-1547, under solicitation SPE7L4-26-T-5631. This is a total small business set-aside under NAICS code 336211, with responses due by July 27, 2026, and delivery required within 359 days after order. The item is classified as a commercial item and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific controls for phosphate coating, qualified product and manufacturer lists, and configuration change management. Inspection and acceptance occur at origin, and suppliers must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Export control regulations apply to the technical data associated with this item, subject to ITAR or EAR, requiring prior government authorization for any export or disclosure to foreign persons, including foreign national employees within the U.S. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export-controlled data training, and receive DLA approval to access the technical data. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and packaging must conform to DLA standards. Additionally, government identification must be removed from any rejected supplies. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance based in New Cumberland, Pennsylvania, and primary point of contact Anna-Rachelle Betts.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

25--SHOCK ABSORBER,LEVER AThe contract solicitation is for 112 shock absorbers, lever A, identified by NSN 2510015281547, with 111 units to be delivered to W1A8 DLA DISTRIBUTION within 359 days after order award and one additional unit requiring delivery within 60 days. All responsible sources are invited to submit electronic quotes, and submissions must be received by the response deadline of July 27, 2026. This is a Total Small Business Set-Aside under FAR 19.5, exclusively reserved for small businesses as defined by the Small Business Administration, with the NAICS code 336211 corresponding to automotive parts and accessories manufacturing. The solicitation is managed by the DLA Land and Maritime office under the Department of Defense, located in Columbus, Ohio, and all inquiries must be directed via email to the designated buyer listed in the official solicitation document accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

DEADLINE

801 RHG OLA Water TankerThis solicitation, titled 801 RHG OLA Water Tanker and assigned solicitation number F4ATD16160AQ02, is a Total Small Business Set-Aside under FAR 19.5 for a firm fixed price contract aimed at procuring a 6,000-gallon water tanker kit and associated services for installation on a government-owned Caterpillar CAT 730 articulated truck chassis. The requirement is strictly for a full package delivery including the tank body and spray system (CLIN 0001), complete turnkey installation onto the chassis (CLIN 0002), and comprehensive initial operator training for personnel of the 801st RED HORSE Training Squadron (CLIN 0003). The solicitation is non-severable and non-responsive bids will be rejected if the entire package is not quoted. Vendors must be registered in the System for Award Management (SAM) with a valid Unique Entity ID and CAGE code, and only small businesses under the NAICS code 336211 with a size standard of 1,000 employees are eligible to respond. The water tanker must be constructed of heavy-duty carbon or mild steel plate with internal longitudinal and transverse baffles, and the integrated spray system must include rear, side, and front spray bars, a remote-controlled water cannon, and a hose reel, all operating at a minimum flow rate of 1,000 to 1,250 GPM via a hydraulically driven centrifugal pump. Delivery is required at Nellis Air Force Base, Nevada, within 60 days after award, with inspection and acceptance occurring at the destination under FOB Destination terms. The vendor assumes full responsibility for all logistics, shipping, and transportation costs, either by delivering the complete kit directly to Nellis AFB for on-site installation or by transporting the government-owned CAT 730 truck to the vendor’s certified facility for integration and then returning the completed vehicle to Nellis AFB. Acceptance is contingent upon successful completion of a 100% leak test at maximum capacity, full functional verification of all spray components and controls, provision of technical manuals for the system and its components, and completion of operator training. The contract incorporates mandatory clauses from FAR and DFARS, including provisions for electronic invoicing via Wide Area WorkFlow, Buy American compliance, prohibitions on business with the Maduro regime and entities operating in Xinjiang

POSTED

DEADLINE

SPRING ASSEMBLY, CLUTCHThe contract is for the procurement of 70 units of Spring Assembly, Clutch, identified by NSN 2520-01-360-8092 and part number 23045586, with delivery required within 168 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. The item is designated as a critical application item and must be sourced exclusively from approved suppliers including AMZ Alabama Inc., BAE Systems Tactical Vehicle Systems LP, and Allison Transmission Inc. Strict adherence to国防部 technical and quality requirements referenced in the DLA Master List is mandated, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified. Attribute classifications must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of preservation method 33 and material 49 to prevent corrosion on all bare metal surfaces, with unit containers designed to immobilize the item and prevent damage. Package marking must follow standard protocols with no special marking codes required. Palletization and shipping must conform to DLA packaging guidelines and hazardous materials procedures outlined in IP025. Shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 5, 2027, and an original delivery deadline of December 18, 2026. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification provisions, and requires substitution approval unless explicitly permitted. All deliveries are subject to a zero percent quantity variance, and the unit of issue is each, consistent with DoD standards.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

KINGPIN, FIFTH WHEELThe contract pertains to the procurement of Kingpin, Fifth Wheel components under solicitation SPE7L3-26-T-109L, a Women-Owned Small Business Set-Aside, with a requirement for six units delivered FOB origin within 168 days of the contract award. The item is identified by NSN 2510-01-109-7054 and is classified as a Critical Application Item, subject to stringent technical and quality controls mandated by the DLA Master List of Technical and Quality Requirements, which supersedes all other referenced standards unless explicitly overridden. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with palletization governed by DLA’s RP001 requirements, and all shipments must adhere to the specified parcel post and freight addresses at the New Cumberland, PA facility. Inspection and acceptance occur at origin, with sampling protocols following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stipulated; unspecified attributes are treated as major with verification levels assigned accordingly. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. All technical specifications referenced are controlled by the DLA Master List revision effective on the solicitation or award date, and deviations must be formally requested via Engineering Change Proposal or Variance. The contract enforces full and open competition under a WOSB set-aside, with a purchase request number 7017439033, unit price of zero, and total value contingent upon delivery. The original required delivery date is March 20, 2027, with a need ship date of January 5, 2027, and no quantity variance is permitted.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 5 days

General Info

Agency

Pennsylvania → Department of CorrectionsView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 14

subcontract

Response DeadlineJan 29

Deadline has passed

Submission Closed

01/29/2026, 05:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyPennsylvania → Department of Corrections

ContactsNo contacts available

OfficeN/A

Organization / Agency

Pennsylvania → Department of Corrections

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Procure and deliver used 40-foot or 53-foot flatbed trailers, model year 2020 or newer, under 500,000 miles, with current PA inspection and full compliance with Federal DOT and FMVSS standards. Title documents required.