Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Winch Repair Kits for DLA

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of five commercial off-the-shelf winch repair kits to be delivered within five days of award to the DLA Stock Receipt Account Depot in Texarkana, Texas, with a strict delivery deadline to meet operational readiness requirements. All kits must be properly packaged and labeled in full compliance with MIL-STD-129 for military standard marking and handling, and must adhere to NIST SP 800-171 guidelines to ensure the safeguarding of covered defense information throughout the supply chain. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, under the NAICS code 336390 for other transportation equipment manufacturing. This is classified as a subcontract under the Department of Defense’s Land Supply Chain ESO Buys organization, and performance is solely obligated at the specified Texarkana location with a zip code of 75507-5000.

General Info

Supply five winch repair kits to Texarkana, Texas, by delivery deadline, compliant with MIL-STD-129 and NIST SP 800-171.

Agency

Department Of Defense → LAND SUPPLY CHAIN ESOC BUYSView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 5 commercial off-the-shelf winch repair kits with fast delivery (within 5 days ARO) to DLA Stock Receipt Account Depot in Texarkana, TX. Packaging and labeling must comply with MIL-STD-129 and NIST SP 800-171 for safeguarding covered defense information.

Similar Contracts

Same NAICS industry code

Gearbox Assembly Manufacturing & TestingThe contract requires the manufacture, integration, and testing of an AI gearbox assembly according to technical drawing NR 81755 16Z001, with strict adherence to AS9100 quality management standards and MIL-STD-1916 zero-defect inspection protocols. All work must be performed to ensure defect-free production, emphasizing precision, reliability, and compliance with military-grade quality requirements. The assembly must meet all specified engineering criteria and undergo comprehensive testing to validate performance under operational conditions. The opportunity is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required at the location in New Cumberland, Pennsylvania, designated by zip code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 336390 identifies the procurement within the Other Transportation Equipment Manufacturing sector, indicating specialized manufacturing for defense-related systems. Interested parties must submit proposals before the deadline to be considered for award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing and SupplyThe contract seeks the manufacture and delivery of ten units of a nonmetallic hose assembly identified by NSN 4720005221467 and part number 10876146, with strict adherence to military specifications covering all aspects of production, including packaging, labeling, shelf-life validity, and hazard communication requirements. The product must meet all applicable defense standards for quality, durability, and safety to ensure suitability for operational use. Packaging and marking must comply with DoD directives to facilitate handling, storage, and distribution across military supply chains, while hazard labeling must accurately reflect any chemical or physical risks associated with the assembly. This is a subcontract opportunity posted by the Maritime Supply Chain under the Department of Defense, with a solicitation response deadline of August 13, 2026. The North American Industry Classification System code 336390 indicates the work falls under other transportation equipment manufacturing. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS platform, and all bidders are expected to fulfill contractual obligations without deviation from technical, logistical, or regulatory requirements. Subcontractors must be prepared to demonstrate compliance with federal procurement standards and provide documentation to verify conformance throughout the production and delivery timeline.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Exhaust Muffler Manufacturing and SupplyThe contract pertains to the manufacture and delivery of 19 exhaust mufflers, identified by NSN 2990-01-366-7020 and Part Number 88-21109, with full adherence to source-controlled drawings and precise technical specifications. The work must be executed in strict compliance with all engineering and quality standards defined by the procurement authority, ensuring each unit meets the required performance and durability criteria for military use. The product is intended for deployment in defense-related applications and is subject to rigorous inspection and validation procedures prior to acceptance. The contract is categorized as a subcontract under NAICS code 336390, which corresponds to other transportation equipment manufacturing, and is administered by the Department of Defense under the Land Supplier Operations Engines organization. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. All bids must align with the official requirements outlined in the referenced procurement link, and failure to comply with technical or logistical directives will result in disqualification.

LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

Precision Gear Cluster Manufacturing and SupplyThe contract demands the manufacture and supply of a precision spur gear cluster designated by NSN 3020012287613, intended for critical applications in combat vehicle drivetrains or armament systems. The component must adhere to stringent military standards ensuring exceptional durability, material integrity, and operational reliability under extreme conditions. Manufacturing must comply with established defense specifications and quality controls to guarantee performance in high-stress environments, with all work required to meet or exceed technical and dimensional tolerances for mission-critical use. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is classified as a subcontract under NAICS code 336390, which pertains to other transportation equipment manufacturing. The place of performance is identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating where the final product must be delivered or assembled. The contracting organization is the LSO Combat Vehicles and Armament office under the Department of Defense, signaling the high-priority nature of the requirement for national defense systems. The full solicitation details can be accessed via the provided DIBBS link for potential vendors to review technical specifications and submission guidelines.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Wiper Blade Refill ManufacturingThe contract requires the manufacture of 264 wiper blade refills that must fully comply with military specifications and be derived from approved part numbers provided by Trico Products Corporation, AMZ Alabama Inc., or BAE Systems Tactical Vehicle Systems LP. All units must meet rigorous defense standards to ensure reliability and performance in tactical vehicle applications. The work is assigned a NAICS code of 336390, indicating it falls under other transportation equipment manufacturing, and is structured as a subcontract opportunity under the Department of Defense’s Land Supplier Operations Vehicle Support organization. Performance of the contract is designated to take place at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The contract falls under a broader acquisition initiative managed by the Department of Defense to ensure consistent supply of critical vehicle components. While no specific set-aside classification or point of contact is listed, all manufacturers must verify eligibility and compliance with the approved vendor list before submitting proposals through the DIBBS platform.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplyThe contract seeks the supply of four units of a nonmetallic hose assembly identified by NSN 4720014945683, which is a commercial off-the-shelf item requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking standards. The item falls under NAICS code 336390 and is classified as a subcontract under the Department of Defense’s Fluid Handling Division. All deliveries must comply with military-grade packaging and labeling protocols to ensure handling, storage, and identification meet defense logistics requirements. The place of performance is designated as Barstow, California, with a ZIP code of 92311-5014, indicating where the units must be delivered upon fulfillment. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-aside provisions specified. The contract opportunity is accessible via a DIBBS portal link, and all prospective respondents must ensure full compliance with the technical and administrative specifications outlined by the military standards.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Vehicular Clutch Disks (Carbon Steel)The contract entails the full-cycle manufacturing of vehicular clutch disks constructed from carbon steel, encompassing all stages from initial machining and precision forming to heat treatment processes that ensure required material properties and durability. Quality testing is mandated at multiple stages to verify compliance with performance and safety standards, with final packaging and delivery required to meet all Department of Defense specifications for DLA compliance, including labeling, documentation, and protective packaging protocols. The work is to be performed at a designated location in Anniston, Alabama, with the delivery schedule and inspection requirements tied to military supply chain expectations. This subcontract, issued under the NAICS code 336390 for Other Transportation Equipment Manufacturing, is managed by the Department of Defense through the Land Supply Chain office and is publicly posted with a response deadline of August 13, 2026. It requires suppliers to demonstrate capability in end-to-end production, from raw material input to certified final product, with strict adherence to defense-specific quality assurance and traceability standards. While no set-aside provisions are specified, the obligation to comply with DLA packaging and delivery rules imposes additional logistical and administrative requirements beyond standard commercial manufacturing practices.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Left Rear Mudguard Splash Shield (NSN 2540-01-456-0508)The contract calls for the manufacture of 112 units of a left rear mudguard splash shield designated by NSN 2540-01-456-0508, to be produced in full compliance with Technical Data Package Revision B Gen 2 and applicable military specifications, ensuring the component meets the rigorous performance and durability standards required for the M1 tank. All work must adhere strictly to the defined engineering and quality control requirements, with no deviations permitted without formal authorization. This is a subcontract under a Women-Owned Small Business Set-Aside, classified under NAICS code 336390, and is being solicited by the LSO Combat Vehicles and Armament office within the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, and all performance is expected to align with defense logistics standards. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for eligible WOSB vendors seeking to participate.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Engine Water Pump Parts Kit Assembly and PackagingThe contract requires the assembly and packaging of standardized engine water pump parts kits in strict compliance with military packaging standards, specifically adhering to NSN requirements and MIL-STD-2073-1E guidelines. All components must be sourced and consolidated into single-box protective packaging to ensure readiness for military use, emphasizing durability, traceability, and environmental protection during storage and transit. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 336390 for other transportation equipment manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The place of performance and point of contact details are not specified, but all work must align with federal defense logistics protocols.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of Power Takeoff Transmission Units for Military VehiclesThe contract calls for the procurement and delivery of nine Power Takeoff Transmission units identified by NSN 2520150270892, specifically designed for use in military vehicle platforms. All units must strictly adhere to Department of Defense technical specifications, labeling requirements, and packaging standards set by the Defense Logistics Agency to ensure compatibility, durability, and operational readiness in demanding field conditions. The deliverables are destined for performance at New Cumberland, Pennsylvania, with the zip code 17070-5002 designated as the official place of performance. The contract is classified as a subcontract under NAICS code 336390, which corresponds to other transportation equipment manufacturing, and is managed by the Land Supplier Operations Vehicle Support under the Department of Defense. All proposals must be submitted by the deadline of August 13, 2026, at 17:00 UTC, following the solicitation issued on August 2, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Floor Mat (NSN: 2540015773475)The contract requires the full manufacturing, packaging, labeling, and delivery of a military-spec floor mat identified by NSN 2540015773475, with strict adherence to MIL-STD-129 for packaging, ASTM D3951 for packaging standards, and DLA RP001 for defense logistics procedures. All units must be produced to meet military specifications and delivered FOB origin to multiple Department of Defense locations across the United States. The effort is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses can compete for this opportunity, aligned with the North American Industry Classification System code 336390 for other transportation equipment manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain under the DLA procurement system.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

REFILL BLADE, WIPER

Solicitation # SPE7L3-26-T-144P

This contract specifies the procurement of wiper blade refills under the NSN 2540014540415, with a total quantity of 264 units to be delivered FOB origin within 78 days of contract award. The items must comply with DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129, with individual commercial skin packs acceptable as the unit packaging method. No ozone-depleting chemicals are permitted in the manufacture or incorporation of these items, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract identifies specific approved part numbers from Trico Products Corporation, AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP, all corresponding to the same NSN. Delivery is directed to the DLA Distribution center in New Cumberland, Pennsylvania, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and all shipments must adhere to DLA transport and freight protocols outlined in procedural notes C19 and C20. The solicitation number is SPE7L3-26-T-144P, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office, with a response deadline of August 13, 2026, and a posted date of August 2, 2026. The NAICS code 336390 identifies the classification as Other Transportation Equipment Manufacturing. The primary point of contact is Amber Rohly, reachable via email and phone provided. Packaging must be palletized in accordance with DLA requirements, and the special marking code indicates no additional special markings are required. The original required delivery date is December 17, 2025, with a need ship date of December 9, 2025, aligning with the 78-day delivery window. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements govern performance unless modified by solicitation amendment, and simplified acquisition rules apply with the Master List revision in effect on the solicitation issue date controlling compliance.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN ESOC BUYS

Same awarding agency

REPAIR KIT, WINCH

Solicitation # SPE7L0-26-T-0391

The contract is for the procurement of a Repair Kit, Winch under solicitation SPE7L0-26-T-0391, with a required delivery of five units within five days of order. Each unit is priced at $5.00, totaling $25.00, and the material is identified by NSN 3950-01-603-1433 and part number 95SK416. All items must be packaged in compliance with ASTM D3951 and governed by DLA’s Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129. The unit of issue is each, with no variance allowed in quantity. Deliveries are FOB origin, and inspection and acceptance occur at the destination. Packaging must adhere to DLA’s packaging requirements and be palletized according to RP001 standards. Goods must be shipped by the fastest traceable method, excluding parcel post, to the designated DLA depot in Texarkana, Texas, with full compliance to marking instructions including the M/F code W45G186208019Q. The original required delivery date is July 30, 2026, and the contract is issued under a federal acquisition framework governed by Department of Defense guidelines and technical specifications.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 19 hours ago

DEADLINE

Packaging, Marking, and Bar-Coding ServicesThe contract requires compliant packaging, preservation, marking, and bar-coding of a bracket in accordance with ASTM D3951, MIL-STD-129, and DLA standards, with specific attention to unit identification and proper palletization practices. All procedures must meet exacting military and industry specifications to ensure consistent handling, storage, and logistics readiness across the supply chain. The work is categorized as a subcontract under NAICS code 561910 with a performance location in Texarkana, Texas, 75507-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The contracting activity is under the Department of Defense’s Land Supply Chain ESOC Buys organization, indicating this effort supports defense logistics operations. Failure to meet the referenced standards will result in non-compliance and potential rejection of delivered items.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials associated with the part or packaging must be labeled in strict compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement DFARS 252.223-7001, ensuring accurate identification of chemical hazards, proper safety information, and consistent labeling formats across the supply chain. This requirement applies to every stage of production, handling, and delivery, with labels including hazard statements, pictograms, signal words, and precautionary measures as mandated by federal regulations. The subcontract opportunity, titled Hazardous Materials Compliance and Labeling, is issued under NAICS code 561990 by the Department of Defense’s LAND SUPPLY CHAIN ESOC BUYS team, with performance obligations centered in Texarkana, Texas, at ZIP code 75507-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. Contractors must demonstrate full adherence to both HCS and DFARS labeling standards as a non-negotiable condition of award, with failure to comply resulting in rejection or contract termination.

All Other Support Services

POSTED

DEADLINE

Quality Assurance and Compliance Testing ServicesThe contract entails comprehensive quality assurance and compliance testing for a vehicular bracket to ensure adherence to DLA Master List requirements, applicable MIL-STDs, and ASTM D3951 standards. The scope includes dimensional verification and non-destructive testing to validate structural integrity and conformance to technical specifications. These activities are critical to certifying the component’s suitability for military use and must be performed with precision and documented in accordance with federal procurement guidelines. The solicitation is issued as a subcontract under NAICS code 541330, reflecting professional, scientific, and technical services focused on testing and inspection. It is managed by the Department of Defense through the LAND SUPPLY CHAIN ESOC BUYS office, with performance required at a designated location in Texarkana, Texas, zip code 75507-5000. Interested parties must submit responses by the deadline of August 10, 2026, with the opportunity accessible through the DIBBS platform. No set-aside classification has been designated, and the contract is open to qualified subcontractors capable of delivering certified testing services to defense specifications.

Engineering Services

POSTED

DEADLINE

Precision Machining and Fabrication of Vehicular BracketThe contract pertains to the precision machining and fabrication of a restricted-source vehicular bracket designed for critical-application use in military systems, requiring strict adherence to Department of Defense technical specifications and military standards. Manufacturing must be performed under government engineering source approval, ensuring that only qualified and vetted suppliers engage in production to maintain fidelity and reliability for operational use. The bracket is subject to stringent quality control protocols and must meet exacting dimensional, material, and performance criteria mandated for deployment in high-stakes vehicular environments. Performance of this subcontract is obligated at the specified place of performance in Texarkana, with a response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. The North American Industry Classification System code 332999 designates it under Other Miscellaneous Fabricated Metal Product Manufacturing, indicating specialized fabrication rather than standard production. The contracting agency, LAND SUPPLY CHAIN ESOC BUYS under the Department of Defense, seeks a supplier capable of meeting classified sourcing requirements, with no set-aside provisions indicated. The work is not open to general competition and requires prior authorization and compliance with defense supply chain integrity protocols.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BRACKET, VEHICULAR C

Solicitation # SPE7L0-26-T-0390

The contract is for the procurement of two units of a vehicular bracket identified by NSN 2590016305902 and OSHKOSH DEFENSE LLC part number 3979571, under solicitation SPE7L0-26-T-0390. This is a restricted source item requiring government engineering source approval and is designated as a critical application item. Delivery is due within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement, and all technical and quality requirements referenced in the DLA Master List take precedence. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated DLA logistics center in Texarkana, Texas, with specific mark-for and freight shipping addresses provided. The required delivery date is March 23, 2026, and the contract includes detailed government-use codes and tracking identifiers.

All Other Transportation Equipment Manufacturing

POSTED

DEADLINE

DPAS-Rated Order Fulfillment CoordinationThis contract requires coordination to ensure that all internal and subcontractor processes align with the Defense Priorities and Allocations System (DPAS) to prioritize the fulfillment of rated orders. The focus is on maintaining compliance with federal defense allocation standards to support critical national security supply chains, ensuring that high-priority defense-related requirements are met without delay. All parties involved must implement procedures that actively safeguard the timely execution of DPAS-rated tasks, including prioritization, scheduling, and resource allocation. The contract is classified as a subcontract under NAICS code 541611 and is managed by the Department of Defense through the LAND SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 29, 2026, with a mandatory response deadline of August 5, 2026. While specific location details are not provided, performance is expected to support defense supply chain objectives across applicable operational domains. The emphasis is on systemic adherence to DPAS protocols rather than geographic delivery, requiring robust internal controls and subcontractor oversight to guarantee compliance with national defense priorities.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance and CMMC Level 2 ImplementationThe contract requires the implementation and documentation of CMMC Level 2 cybersecurity controls for systems that handle covered defense information, ensuring compliance with Department of Defense cybersecurity standards. The work involves translating CMMC requirements into actionable technical and procedural controls, documenting evidence of compliance across all applicable domains, and supporting audits or assessments to validate adherence. This subcontract is intended for organizations with expertise in defense cybersecurity frameworks and must be executed in alignment with the National Institute of Standards and Technology and Department of Defense guidance. The solicitation, posted on July 29, 2026, with a response deadline of August 5, 2026, falls under NAICS code 541512 for computer systems design services and is managed by the Department of Defense through the LAND SUPPLY CHAIN ESOC BUYS organization. The place of performance is not specified, indicating potential flexibility in execution location, but the work must support systems handling sensitive defense data. Interested parties must submit proposals by the deadline and demonstrate proven capability in CMMC Level 2 implementation, system documentation, and experience with defense contractors or federal compliance environments.

Computer Systems Design Services

POSTED

DEADLINE

Supply Chain Traceability and Compliance ReportingThe contract requires strict maintenance and reporting of full supply chain traceability for all components, ensuring complete documentation of material certifications and origins to comply with the Buy American Act. This includes providing verifiable records that demonstrate the sourcing, manufacturing, and processing of materials meet domestic content standards, with no tolerance for incomplete or noncompliant documentation. The responsibility lies with the contractor to establish and sustain auditable traceability from raw material through final assembly. This is a subcontract under the Department of Defense, managed by the LAND SUPPLY CHAIN ESOC BUYS, with a NAICS code of 541611, indicating services related to administrative management and general management consulting. The solicitation was posted on July 29, 2026, and responses are due by August 5, 2026. Performance is expected to support federal procurement requirements, with compliance being mandatory and subject to verification. All parties must ensure their processes align with U.S. sourcing mandates and be prepared to submit documentation upon request.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Defense Logistics Agency Packaging and Palletization ServicesThe contract requires the provision of DLA-compliant packaging, labeling, and palletization services for cable assemblies destined for international shipment to Germany, adhering strictly to RP001 and ASTM D3951 standards. All work must ensure that the packaging and labeling meet the rigorous requirements set by the Defense Logistics Agency for secure, standardized, and traceable transport under international shipping protocols. The scope encompasses every step from initial packaging through final palletization to guarantee readiness for global logistics operations, with full compliance as a non-negotiable condition. This is a subcontract opportunity issued under NAICS code 493190 by the Department of Defense’s LAND SUPPLY CHAIN ESOC BUYS division, with a response deadline of August 5, 2026, and a posted date of July 29, 2026. The performance location is not specified beyond the destination in Germany, and no set-aside classification is indicated. Interested parties must respond by the stated deadline through the DIBBS portal, ensuring all technical, logistical, and regulatory criteria are met to qualify for award.

Other Warehousing and Storage

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingA military-grade special-purpose electrical cable assembly with NSN 5995-01-627-6449 is being procured under a subcontract solicitation issued by the Department of Defense’s LAND SUPPLY CHAIN ESOC BUYS division. The contract requires full lifecycle execution including design, fabrication, testing, and delivery of the cable assembly, with strict adherence to Defense Logistics Agency technical and quality standards to ensure operational readiness and reliability in demanding environments. All work must comply with industry specifications relevant to defense applications, and the product must meet exacting performance, durability, and environmental resilience requirements. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 5, 2026, indicating a swift procurement timeline. The NAICS code 335932 classifies the work under wiring device manufacturing, aligning with specialized defense electronics production. Although no set-aside information or point of contact is provided, the place of performance and organizational details remain unspecified, leaving the geographic scope of execution open to the contractor’s capability. The official procurement portal for submissions and further details is accessible through the referenced DIBBS link.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of one special-purpose electrical cable assembly compliant with military specifications, requiring strict adherence to traceability, labeling, and packaging standards to ensure operational reliability and accountability. All manufacturing processes must meet Defense Department requirements for quality control and documentation, with full material and component tracking throughout production to support logistics and maintenance operations. The assembly must be delivered in accordance with prescribed packaging guidelines to prevent damage during transit and ensure readiness upon receipt. The solicitation is issued as a subcontract under NAICS code 335930 by the Department of Defense’s LAND SUPPLY CHAIN ESOC BUYS, with a response deadline of August 5, 2026, and was posted on July 29, 2026. There is no set-aside designation specified, and the place of performance and point of contact details are not provided. Interested parties must submit proposals via the designated DIBBS portal before the deadline to be considered, and compliance with all technical and administrative requirements will be mandatory for award consideration.

POSTED

DEADLINE