Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Yellowgate Industrial Equipment

Active

Federal

Response Deadline09/29/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the General Services Administration FAS Region 7 Acquisition Center, involves the supply of brand-name industrial safety and access equipment for prime contractors on GSA Supply Chain Management projects. The specific requirement is for the delivery of two Yellowgate P/N 11792-R2 (BNO) units, with a strict mandate for compliance with MIL-STD-129R marking and labeling standards. The contract is designated as a total Small Business Set Aside under NAICS code 423830. To be eligible, providers must possess EDI capability or be registered with the GSA Order Management Services Vendor Portal. The opportunity was posted on September 24, 2026, with a response deadline of September 29, 2026.

General Info

GSA subcontract for two Yellowgate safety units, Small Business Set Aside, NAICS 423830.

Agency

General Services Administration → Gsa/fas Region 7 Acqusition Center

NAICS

423830 - Industrial Machinery and Equipment Merchant Wholesalers

Place of Performance

65180, CA, USA

Set-Aside

SBA

Documents

This scope was carved out of 47QSSC-27-Q-0005.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RollAstep MP72 Brand Name Only (BNO)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineSep 29

Submission deadline

Response Deadline

09/29/2026, 08:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies brand-name industrial safety and access equipment for prime contractors on GSA Supply Chain Management projects. Provisions Yellowgate P/N 11792-R2 (BNO) units. Ensures compliance with MIL-STD-129R for marking and labeling. Requires registration with GSA's Order Management Services (OMS) Vendor Portal or EDI capability. Delivers two Yellowgate P/N 11792-R2 units.

Similar Contracts

Same NAICS industry code

ESJC – CEMENT SUPPLIES BID

Solicitation # esjc-cement-supplies-bid

The Excelsior Springs Job Corps, located in Missouri, is seeking bids for a subcontracting opportunity to provide cement masonry supplies. This solicitation is open to various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their bids by October 1, 2026, at 12:00 PM CST. For further details and required documentation, applicants should contact Michael Bugner via email at bugner.michael@jobcorps.org.

Excelsior Springs Job Corps

POSTED

about 6 hours ago

DEADLINE

Yale® NR035DC Forklift Kit Supplier

Department Of Justice US Marshal Service

POSTED

about 10 hours ago

DEADLINE

FY26-30 A46 TD 26296 WAREHOUSE FORKLIFT BPA

Solicitation # 15M10226QA4700426

The Department of Justice U.S. Marshals Service is soliciting quotes for a Blanket Purchase Agreement (BPA) to establish a firm-fixed-price purchasing mechanism for Yale NR035DC forklift kits. This is a total small business set-aside under NAICS code 423830. The agreement consists of a base period from September 30, 2026, to September 29, 2027, with four subsequent option years. The BPA itself holds no initial funding but allows for the processing of individual purchase orders once a vendor is selected. Award will be based on the Lowest Priced Technically Acceptable (LPTA) criteria, where technical acceptability is a prerequisite for price evaluation, and no substitutions for the specified equipment are permitted. Prospective offerors must be registered in the System for Award Management (SAM), possess a valid CAGE code, and be IPP compliant for electronic invoicing. Submissions must be sent as a single PDF to the designated point of contact by September 28, 2026, at 11:00 am EST. The proposal must include a signed SF1449 with pricing, supporting documentation on company letterhead, and a specific subject line. Pricing must include shipment, and the government will evaluate quotes based on mathematical accuracy, completeness, and fairness. Final inspection and acceptance of deliverables will be managed by the Contracting Officer's Representative.

Department Of Justice US Marshal Service

POSTED

about 10 hours ago

DEADLINE

Procurement of CNC Machinery and Welding Equipment

Solicitation # PFRU2-2025-779.1

The Partnership Fund for a Resilient Ukraine Phase 2, managed by the UK Foreign, Commonwealth and Development Office, is seeking a qualified organization to supply CNC machinery and welding equipment under solicitation PFRU2-2025-779.1. All proposals and inquiries must be submitted via email to pfruprocurement@chemonics.com, ensuring the tender number is included in the subject line. The deadline for submitting questions is October 5, 2026, at 18:00 Kyiv time, while the final deadline for proposal submission is October 13, 2026, at 15:00 Kyiv time. Applicants must provide price proposals in either English or Ukrainian and include completed Terms of Reference, Annex 1, and valid national registration documents. Payments for services will be made excluding VAT, as the PFRU-2 project is exempt from taxes and fees in the partner country. All official communication must be conducted exclusively in writing through the designated email address.

Chemonics International, Inc.

POSTED

about 19 hours ago

DEADLINE

Zamboni Ice Re-surfacing Machine SupplierThis subcontract involves the procurement and delivery of one new Zamboni brand ice re-surfacing machine, or an approved equivalent, for use on Salt Lake City Corporation projects. The selected supplier is responsible for managing the packaging and labeling of shipping containers according to purchase order requirements and providing clear packing lists. The final product must be delivered to the Gallivan Center. To be eligible for this contract, the supplier must be registered with the Utah State Division. The opportunity was posted on September 24, 2026, with a response deadline of October 8, 2026. This procurement falls under NAICS code 423830 and is managed by the state of Utah.

POSTED

DEADLINE

Salt Lake City Request for Bid SLCI27035 New Zamboni for the Gallivan Center

Solicitation # SLCI27035

Salt Lake City Corporation, on behalf of the Community Reinvestment Agency, is soliciting competitive sealed bids for the purchase and delivery of one new Zamboni Model #546 ice resurfacing machine for the Gallivan Center. The equipment must include all standard manufacturer features plus specific additional requirements, such as an auto snow breaker, hydraulic oil cooler, tire wash system, and an electric water gauge on the dashboard. Bidders must be authorized sellers of Zamboni brand equipment and are required to provide a current W9, detailed warranty information, and a guarantee of pricing for 30 days following the bid closure. The contract will be awarded to the lowest responsible and responsive bidder based on the total proposed cost. All bids must be submitted electronically via the Utah Public Procurement Place by October 8, 2026. Submissions must include a cover sheet, a narrative response to mandatory requirements, and the mandatory cost proposal form. The resulting agreement will be subject to standard city terms and conditions, including Net 30 payment terms and a minimum one-year warranty. Bidders must also comply with city ethical standards and be registered with the Utah State Division of Corporations and Commercial Code.

POSTED

DEADLINE

Electric Pallet Jack Supplier

Texas Department of Criminal Justice

POSTED

DEADLINE

Industrial Scale Parts and Hardware SupplyThis subcontract focuses on the supply of industrial deck scale components, including load cells, platforms, electronic parts, and digital indicators, for prime contractors working on City of Philadelphia Department of Sanitation projects. The provider must supply OEM or equivalent quality replacement parts and mounting hardware, ensuring all deliveries are made to the City of Philadelphia. The contract requires strict adherence to Philadelphia City tax regulations. Interested parties must respond by October 9, 2026, for this opportunity categorized under NAICS code 423830. Performance of the contract will take place within the city of Philadelphia.

POSTED

DEADLINE

OEM Transit Bus Mechanical Components (Springs & Bushings)This subcontract for the GRTC Transit System involves the sourcing, packaging, and delivery of OEM Gillig bus mechanical components, specifically focusing on extension springs and neoprene rubber radiator brace bushings. Operating under an IDIQ schedule, the provider is responsible for delivering physical parts as ordered to prime contractors. The contract requires strict adherence to Buy America Certification and specifies FOB Destination delivery terms. It falls under NAICS code 423830 and is managed by the GRTC agency in Virginia, with a response deadline set for October 15, 2026.

POSTED

DEADLINE

Janitorial Supplies & Equipment SupplierThis subcontract agreement establishes a three-year partnership with the Government of Yukon to provide a steady supply of janitorial chemicals, consumables, and industrial machinery. The scope of work includes the delivery of cleaning agents, soaps, paper products, and trash liners, as well as equipment such as buffers and vacuums, all provided according to a specified pricing table for prime contractors working on government facility projects. The supplier must adhere to strict confidentiality terms when making deliveries to secure areas. This opportunity is categorized under NAICS code 423830, with a response deadline of October 19, 2026.

Government of Yukon

POSTED

DEADLINE

Equipment Supply (Pumps, Mixers, Blowers)

Chesterfield County

POSTED

DEADLINE

in about 2 months

Supply of Fluid Filters (NSN 4330012635714)This subcontract, managed by the Department of Defense Maritime Supply Chain, involves the supply of 23 fluid filters under NSN 4330012635714 for prime contractors on DLA Land and Maritime supply contracts. The contract is designated as a Total Small Business Set-Aside under NAICS code 423830, with performance taking place in New Cumberland, Pennsylvania. The provider is responsible for coordinating delivery through the First Destination Transportation program and must submit all required Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313 for hazardous materials. Final deliverables include the 23 fluid filters along with the corresponding invoice and receiving report.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from General Services Administration → Gsa/fas Region 7 Acqusition Center

Same awarding agency

Supply of RollaStep MP72 Mobile Work PlatformsThis subcontract, managed by the General Services Administration's FAS Region 7 Acquisition Center, involves the supply of three RollaStep MP72 mobile work platforms for prime contractors on GSA Supply Chain Management projects. The required units are 7-step models featuring lightweight aluminum construction and powder-coated handrails, with 45-degree angle stairs designed to meet OSHA specifications. All equipment must strictly adhere to MIL-STD-129R standards for marking and labeling. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423830. It was posted on September 24, 2026, with a response deadline of September 29, 2026. Performance for this contract is centered in the 65180 zip code area.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

RollAstep MP72 Brand Name Only (BNO)

Solicitation # 47QSSC-27-Q-0005

Solicitation 47QSSC-27-Q-0005 is a Brand Name Only requirement issued by the General Services Administration for the procurement of three RollAstep MP72 platforms and compatible components, specifically two Yellowgate P/N 11792-R2 universal self-closing safety gates and 18 Erectastep Removable Handrail Socket Kits P/N 11557. This acquisition is conducted as an open-market commercial product procurement under FAR Part 12 and is set aside exclusively for small businesses under NAICS 333923, requiring a size standard of 750 employees or less. The equipment must be fully compatible with existing platforms in service and adhere to applicable OSHA and ANSI standards for mobile ladder stands and platforms. Delivery is specified as FOB Destination to San Diego, California. Award will be granted to the responsible offeror providing the lowest evaluated price, provided they pass a strict administrative compliance review. Essential submission requirements include a signed and dated RFQ, a completed MIL-STD-129R compliance form, and confirmation of SAM.gov registration. Vendors must strictly adhere to MIL-STD-129R marking and shipping label requirements, including the use of 2D barcodes and Transportation Control Numbers. All quotes must be submitted via email to Nancy Seale by the deadline of September 29, 2026. Non-conforming supplies may be subject to repair, replacement, or price reductions at the government's discretion.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Container Interior Cabinetry and Organization SpecialistThis subcontract opportunity with the General Services Administration's Region 7 Acquisition Center involves providing interior configuration and installation of storage systems for GSA/SCM container projects. The selected specialist will be responsible for installing industrial storage cabinets along interior sidewalls and configuring layouts to ensure a personnel aisleway of 35 inches, plus or minus 3 inches, for the storage of tools, parts, and bulk materials. All installations must utilize fastening hardware appropriate for metal container walls to deliver fully outfitted interior systems. The project is located at Fort Stewart and falls under NAICS code 337920. This is a total Small Business Set Aside opportunity with a response deadline of October 2, 2026. Interested parties must coordinate with the prime contractor to execute the internal organization and installation requirements.

Blind and Shade Manufacturing

POSTED

DEADLINE

20-Foot MilSpec CONEX Container SupplierThis subcontract through the General Services Administration Region 7 Acquisition Center involves the supply of six new 20-foot MilSpec CONEX storage containers for prime contractors on GSA/SCM procurement projects. The containers must meet military specifications for shipping and storage and feature industrial-grade exterior paint in either tan or green. All deliverables must comply with the Buy American Act under FAR 52.225-2 and be delivered to the designated site at Fort Stewart. The opportunity is designated as a Total Small Business Set Aside under NAICS code 332312. Interested parties must submit their responses by the deadline of October 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

20-Foot MilSpec CONNEX Storage Container

Solicitation # 47QSSC-27-Q-0004

The General Services Administration, through the Supply Chain Management Contracting Service Center, is soliciting quotes for six new 20-foot MilSpec CONEX storage container systems to be delivered FOB Destination to Fort Stewart, Georgia. These containers must be tan or green and configured as organized storage systems for parts, tools, and bulk materials, featuring interior storage cabinets along both sidewalls with a personnel aisleway of approximately 35 inches. All cabinets must be secured using a rail restraint system, and electrical installations must comply with the National Electrical Code. This procurement is a total set-aside for small businesses under NAICS 332439, requiring vendors to have a size standard of 600 employees or less in their SAM account. Award will be based on administrative compliance and the lowest evaluated price, provided the offeror meets all technical specifications and administrative requirements. Vendors must be registered in SAM.gov and be willing to register with the GSA Order Management Services Vendor Portal or EDI for electronic ordering. Strict adherence to Military Standard 129R for marking and shipping labels is required for deliveries to military activities, including specific bar-coding for NSN, CAGE codes, and purchase order numbers. All quotes must be signed, dated, and submitted via email to Nancy Seale by October 2, 2026, at 4:00 PM EST to be considered for award.

Other Metal Container Manufacturing

POSTED

DEADLINE

Converter Installation, Calibration, and TrainingThis subcontract involves the installation, calibration, and testing of Fixed Frequency Converters for prime contractors working with the GSA/FAS Region 7 Acquisition Center. The scope of work includes integrating the converter into the facility power system, performing technical calibrations with specialized tools, conducting performance tests, and providing comprehensive operator training on equipment maintenance. All work must be performed in accordance with Service Contract Labor Standards to ensure a fully operational delivery. The project is located in San Diego, ZIP code 92135, and falls under NAICS code 238210. Interested parties must respond by September 30, 2026, following the posting date of September 18, 2026. The primary objective is the delivery of a fully installed and calibrated system that meets all technical specifications for the General Services Administration.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Fixed Frequency Converter SupplyThis subcontract involves the procurement and delivery of one Fixed Frequency Converter for prime contractors supporting GSA/FAS Region 7 Acquisition Center projects. The hardware must strictly adhere to FCX Systems, Inc. Part Number PFC100(X1254800D40GM6P22DC0BBF18) specifications or an approved equivalent. Performance will take place in San Diego, California, under NAICS code 423610. The supplier is required to provide Buy American and Recovered Material Certifications to ensure regulatory compliance. Additionally, all hardware must meet Federal Standard 123 requirements for marking and shipping labels. The response deadline for this opportunity is September 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

RFQ - Frequency Converter

Solicitation # 47QSSC-26-Q-0131-1

Solicitation 47QSSC-26-Q-0131 is a request for quotation issued by the GSA FAS Region 7 Acquisition Center for the procurement and installation of one FCX Systems, Inc. Fixed Frequency Converter, part number PFC100 (X1254800D40GM6P22DC0BBF18), or an approved equivalent. The equipment must be a solid-state 400 Hz aircraft ground power frequency converter with a minimum continuous output capacity of 125 kVA / 100 kW, featuring a 575V 3-phase 400Hz input and a 200/115 VAC 3-phase 4-wire 400 Hz output. The scope of work includes delivery to NAS North Island in Coronado, California, as well as on-site commissioning, inspection, field testing, and training conducted by a factory-trained technician. Required deliverables include PDF format O&M manuals, training materials, and field testing reports. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis among administratively compliant offerors. Technical acceptability is determined on a pass/fail basis, requiring adherence to product salient characteristics, installation requirements, and the delivery schedule. Offerors must submit signed and dated quotes via email by September 30, 2026, including the MIL-STD-129R Compliance Form and technical specifications if proposing an equivalent product. Compliance with Military Standard 129R for marking and shipping labels is mandatory for deliveries to domestic military activities. This acquisition is not set aside for small businesses and is subject to the Buy American Act and various FAR clauses regarding labor, trafficking, and hazardous materials packaging.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Quality Assurance and Acceptance Testing CoordinationThis contract focuses on ensuring that HVAC units comply with merchantability and fitness-for-purpose standards, emphasizing quality assurance throughout the procurement process. The contractor is responsible for supporting government inspections as well as managing the resolution of any defects discovered after acceptance of the units. This helps guarantee that the delivered HVAC systems meet the required operational and quality benchmarks. The subcontract, titled "Quality Assurance and Acceptance Testing Coordination," is issued by the General Services Administration's GSA/FAS Region 7 Acquisition Center. The performance location is San Diego, specifically within the 92135 postal zone. The contract falls under NAICS code 541330, which pertains to engineering services. While specific points of contact and detailed organizational information are not provided, the contract requires a focus on coordinating acceptance testing and ensuring compliance with quality standards in support of federal procurement objectives.

Engineering Services

POSTED

DEADLINE

Transportation and Final Mile Delivery (FOB Destination, CONUS)This contract involves the transportation and final mile delivery of air conditioning units to Naval Air Station North Island, California, under a FOB destination arrangement within the continental United States. The responsibility and risk of loss for the goods transfer to the buyer upon delivery at the specified destination. The procurement is managed by the General Services Administration's Region 7 Acquisition Center, aligning with the NAICS code 484220, which pertains to specialized freight trucking. The scope covers safe and timely delivery of the freight to the designated location in San Diego, CA, ensuring compliance with all relevant regulations and requirements. While specific solicitation details such as a number or set-aside information are not provided, the contract is positioned as a subcontract opportunity aimed at supporting government logistics needs within CONUS, emphasizing the critical role of reliable final mile delivery services for government installations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Marking, and Labeling Services (MIL-STD-129R Compliance)This contract involves providing packaging, marking, and labeling services for HVAC units in compliance with military standards, specifically MIL-STD-129R. The work includes preparing military-compliant packaging, applying the appropriate labeling and markings, and ensuring the inclusion of CAGE codes and UID tagging as required by the standard. The services are intended to meet stringent military specifications to ensure proper handling, identification, and traceability of the HVAC equipment. Issued as a subcontract under the NAICS code 561499, which covers specialized services related to packaging and labeling, the contract is managed by the General Services Administration (GSA) through the Region 7 Acquisition Center. The place of performance is designated to be in San Diego, California, with the postal code 92135. This contract emphasizes adherence to military logistics and identification protocols to support the secure and efficient transportation and tracking of HVAC units.

All Other Business Support Services

POSTED

DEADLINE

Commercial Air Conditioning Unit Supply (Amana TPAC Units)The contract involves the supply of Amana-branded through-the-wall air conditioning units, specifically the TPAC models, to a military installation located in San Diego. The scope covers the complete procurement process, including testing, packaging, and providing all necessary documentation to ensure proper delivery and installation. This subcontract falls under NAICS code 333415, which pertains to air conditioning and warm air heating equipment manufacturing. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract aims to fulfill the military’s operational requirements for reliable and efficient cooling solutions. The focus on thorough testing and correct packaging highlights the importance of quality assurance and readiness to meet the demands of the installation environment. The contract was posted in early May 2026, indicating a forthcoming or ongoing acquisition to maintain climate control infrastructure at the designated location.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS