Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of ZYNQ RFSoC ZCU208 Evaluation Kits

Active

Federal

Response Deadline08/14/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of four Xilinx ZYNQ UltraScale+ RFSoC ZCU208 V1 Evaluation Kits to the Naval Air Warfare Center China Lake, encompassing the full hardware units, preloaded firmware, secure packaging, and timely shipment to the specified government location. The kits are intended for evaluation and testing purposes within defense-related research and development activities, with all components requiring strict compliance with technical specifications and delivery timelines. The order is structured as a subcontract under NAICS code 334511, indicating classification within the semiconductor and related electronic component manufacturing sector. The solicitation was posted on August 4, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM, allowing prospective vendors a limited window to submit proposals. While no set-aside type is specified, the contract is directed toward the Department of Defense through the Naval Air Warfare Center, underscoring its national security relevance. Delivery must align with precise logistical requirements to ensure the units arrive intact and fully operational at China Lake, with no additional details provided regarding payment terms, warranty, or post-delivery support beyond the preloaded firmware and packaging standards.

General Info

Procure and deliver four Xilinx ZYNQ RFSoC ZCU208 kits to Naval Air Warfare Center China Lake by August 14, 2026, for defense R&D.

Agency

Department Of Defense → Naval Air Warfare CenterView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 03:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Air Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Air Warfare Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 4 units of Xilinx ZYNQ UltraScale+ RFSoC ZCU208 V1 Evaluation Kits, including hardware, firmware preload, packaging, and shipment to NAWCWD China Lake.

Similar Contracts

Same NAICS industry code

Digital Data Transceiver Module Supply

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 9 hours ago

DEADLINE

SLOT FILLER MODULE

Solicitation # SPE8E9-26-T-3350

The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

DETECTOR, CARBON DIOXID

Solicitation # SPE2DS-26-T-310Q

The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

CONVERTER, ANALOG TO DI

Solicitation # SPE8EN-26-T-2779

This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 9 hours ago

DEADLINE

CUFF, SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-311C

The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

RETAINER, TUBE, TRACHEAL

Solicitation # SPE2DS-26-T-310Y

The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2808

This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 9 hours ago

DEADLINE

HARNESS, ORONASAL MASK

Solicitation # SPE2DS-26-T-310N

The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-311H

The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

COMPUTER SUBASSEMBL

Solicitation # SPE8E9-26-T-3353

This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2778

The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Air Warfare Center

Same awarding agency

Data Retrieval UnavailableNo contract details are available for this solicitation as data retrieval has failed, preventing identification of the prime contract or associated subcontract opportunities. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, and is listed as a subcontract under the Naval Air Warfare Center within the Department of Defense. No NAICS code, set-aside information, agency organization type, place of performance, or point of contact could be retrieved. The official UI link is provided for potential access, but absence of key details renders the opportunity unactionable without further information.

Web Search Portals and All Other Information Services

POSTED

DEADLINE

VxWorks 7 Technical Support and Maintenance ServicesThe contract is for the provision of comprehensive technical support, software updates, patch management, and lifecycle maintenance services for VxWorks 7 at the Naval Air Warfare Center Weapons Division. The services are required to ensure the ongoing reliability, security, and operational integrity of VxWorks 7 systems throughout the performance period, with all activities aligned to meet mission-critical defense requirements. The subcontractor is expected to deliver timely responses to technical issues, deliver authorized updates and security patches, and manage the software lifecycle in accordance with DoD standards, maintaining compatibility and performance across embedded platforms used in naval weapon systems. The solicitation was posted on August 4, 2026, with responses due by August 11, 2026, and falls under NAICS code 541512 for computer systems design services. Although the place of performance and point of contact details are not specified, the work is directly tied to NAWCWD operations under the Department of Defense. The contract type is classified as a subcontract, and no set-aside provisions are indicated, meaning it is open to eligible contractors without specific small business or other preference requirements. All deliverables must align with the stringent operational and cybersecurity demands of the naval weapons development environment.

Computer Systems Design Services

POSTED

DEADLINE

VxWorks 7 Perpetual Software LicensingThe contract seeks perpetual licenses for the VxWorks 7 real-time operating system to be integrated into defense systems that demand high reliability and deterministic real-time performance. These licenses are intended for long-term use without expiration, supporting critical military applications where system stability and response timing are essential. The procurement is structured as a subcontract under the Department of Defense, specifically managed by the Naval Air Warfare Center, and aligns with the NAICS code 511210, indicating software publication and related activities. Responses are due by August 11, 2026, and the opportunity was posted on August 4, 2026. There is no set-aside designation, meaning all qualified entities may compete, and no specific location is identified for performance, suggesting the software will be deployed across multiple defense platforms and sites. The focus is exclusively on securing immutable perpetual licenses, ensuring ongoing access and integration capabilities without licensing renewal obligations, which is critical for sustained operational readiness in defense environments.

Software Publishers

POSTED

DEADLINE

Filtration and Water Treatment Component SupplyThe contract is for the supply of critical water treatment subsystems including multi-stage filtration, carbon adsorption, mixed-bed deionization, and UV sterilization modules, all of which must comply with ASTM D5127 specifications to ensure high-purity water output. These components are essential for specialized applications requiring stringent water quality standards, and the work must be performed under a Small Business Set Aside designation, reserved exclusively for small businesses as defined by the SBA. The North American Industry Classification System code 333911 applies, indicating the nature of the work relates to other commercial and service industry machinery manufacturing. This subcontract is issued by the Naval Air Warfare Center under the Department of Defense, with proposals required by August 17, 2026, and the opportunity posted on August 4, 2026. While no specific place of performance or point of contact details are provided, the work is expected to support federal operations requiring advanced water purification systems. The solicitation is open only to eligible small businesses, and the award will be made to a vendor capable of delivering fully compliant, reliably engineered subsystems that meet rigorous performance benchmarks without reliance on external documentation beyond the stated standards.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Operator Training and Technical DocumentationThis contract involves the development and delivery of comprehensive training programs and technical documentation for operator and maintenance personnel, specifically focused on equipment used by the Naval Air Warfare Center under the Department of Defense. The scope includes designing a structured training curriculum, delivering hands-on on-site instruction to end users, and producing essential supporting materials such as user manuals, maintenance guides, and formal certification documents to ensure operational readiness and compliance. All deliverables must align with industry best practices and meet the technical and procedural standards required by defense operations. The contract is issued as a subcontract under a Small Business Set Aside designation, exclusively reserved for small businesses, and is classified under NAICS code 611430 for other schools and instruction. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for August 17, 2026, at 11:00 PM. While the exact location of performance has not been specified, the work is intended to support Naval Air Warfare Center missions and may require travel or on-site presence at multiple defense facilities. Participation is restricted to eligible small businesses, and the successful vendor must demonstrate proven capability in technical training development and documentation production for complex systems.

Professional and Management Development Training

POSTED

DEADLINE

Control Systems and Industry 4.0 Interface DevelopmentThe contract seeks the development of a real-time monitoring and data logging system integrated with MES and Industry 4.0 interfaces to enable remote diagnostics and operational reporting for a water recycling system. This effort focuses on enhancing system visibility, data accuracy, and operational efficiency through advanced automation and connectivity, ensuring seamless communication between field equipment and enterprise-level manufacturing systems. The solution must support continuous data capture, anomaly detection, and secure transmission for proactive maintenance and performance analysis. This is a Small Business Set Aside subcontract under NAICS code 541512, issued by the Naval Air Warfare Center on behalf of the Department of Defense. Responses are due by August 17, 2026, with the work performance location currently unspecified. The system must meet rigorous standards for reliability, real-time responsiveness, and cybersecurity, supporting the Navy’s operational needs for sustainable water reuse technologies in remote or austere environments. The project emphasizes innovation in industrial automation and data integrity to fulfill the agency’s strategic goals under Industry 4.0 modernization.

Computer Systems Design Services

POSTED

DEADLINE

System Integration and Installation ServicesThe contract involves on-site mechanical, plumbing, and electrical integration of a water recycling system with the existing ITW EAE Aquastorm 160 infrastructure at NAWCWD Point Mugu, requiring precise coordination with current systems to ensure seamless operation and compliance with facility standards. Work must be performed at the designated location, with all services including installation, connection, testing, and commissioning of the new system to align with the operational requirements of the existing infrastructure. The contract is structured as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, and falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors. Proposals must be submitted by the specified deadline of August 17, 2026, and performance is expected to adhere to all applicable federal, military, and technical specifications governing water reuse and facility integration within a Department of Defense installation.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Water Recycling System Design and ManufacturingThe contract calls for the design, engineering, and manufacturing of a closed-loop water recycling system specifically engineered to integrate with ITW EAE Aquastorm 160 PCB washer systems. The primary objective is to achieve a 90 percent water recovery rate, ensuring efficient reuse and minimal waste generation in printed circuit board cleaning operations. The system must fully comply with ASTM D5127 Type E-1.2 standards, which govern the quality and performance of reclaimed water for use in electronics manufacturing, demanding strict control over contaminant levels and water purity. This work is structured as a subcontract under a Small Business Set Aside, indicating that only eligible small businesses may bid, and is classified under NAICS code 333310, which pertains to industrial machinery manufacturing. The solicitation was posted on August 4, 2026, with a firm response deadline of August 17, 2026, at 11:00 PM. The contracting activity originates from the Naval Air Warfare Center under the Department of Defense, although the precise place of performance and point of contact details are not provided in the available data.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

OpenSSL Engineering Support

Solicitation # N6893626SIMACQE0AH1600024

The Naval Air Warfare Center, Weapons Division, China Lake, intends to award a sole source firm fixed price contract for OpenSSL Engineering Support, quantity two, exclusively to OpenSSL Software Services Inc, due to the requirement being a renewal of an existing build environment. This action is taken under FAR 6.103.1, and no request for quote or competitive solicitation will be issued. Interested parties may submit a capability statement demonstrating their ability to meet the technical requirements without compromising quality, accuracy, reliability, or schedule by 4 p.m. PST on August 10, 2026, referencing solicitation number N6893626SIMACQE0AH1600024, via email to Amy Lamberth. All respondents must be registered in SAM.gov with an active status prior to submission, as the government cannot award to entities without active registration. Additionally, contractors must be certified through the Defense Logistics Information Services for access to Controlled Unclassified Information, requiring a designated Data Custodian listed on the DD 2345 form approved by the Defense Logistics Agency, with access limited to a single point of contact per CAGE code. Vendors are responsible for ensuring compliance with all certification and registration requirements before submitting responses.

Software Publishers

POSTED

DEADLINE

CDU-40B Power System

Solicitation # N6893626SIMACQD5550000051

The Naval Air Warfare Center, Weapons Division, China Lake intends to award a sole source firm fixed price contract to R.E. Beverly III and Associates for the CDU-40B Power System with installation, as a direct replication of an existing system, in accordance with FAR 6.103.1. No request for quotes will be issued, and this notice is not a solicitation; however, interested parties may submit a capability statement by August 10, 2026, at 8:00 AM PST to demonstrate their ability to perform the work without compromising quality, accuracy, reliability, or schedule. All submissions must reference solicitation number N68936-26-SIMACQ-D555000-0051 and be emailed to Virginia Dennison at virginia.j.dennison.civ@us.navy.mil. Vendors must be registered in SAM.gov with an active status prior to submission, and processing for SAM registration may take 10 to 15 days. Additionally, contractors must be certified through the Defense Logistics Information Services to access Controlled Unclassified Information or Export Controlled Information, requiring a designated Data Custodian listed on the DD 2345 form, approved by the Defense Logistics Agency, with access coordinated through the CAGE code’s designated point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Brandywine Precision Timing and Synchronization Module

Solicitation # N6893626SIMACQDB0000MEB0000M0596

The Naval Air Warfare Center, Weapons Division, China Lake, intends to award a sole source firm fixed price contract to Brandywine Communications for one Brandywine Precision Timing and Synchronization Module and one 1PPS module, citing that Brandywine is the original equipment manufacturer and the only source capable of ensuring full integration with existing system components. No competitive solicitation or request for quotes will be issued, as this action is justified under FAR 6.103.1 due to the unique compatibility requirements of the equipment. Interested parties may voluntarily submit a capability statement demonstrating their ability to meet the technical, quality, reliability, and schedule requirements by August 10, 2026, referencing solicitation number N6893626SIMACQDB0000MEB0000M0596 and sending responses to Yvonne Stockwell at the designated Navy email address. All respondents must maintain an active registration in SAM.gov prior to submission, with processing time for registration verification expected to take 10 to 15 days, and failure to maintain active status will disqualify eligibility for award. Additionally, contractors must be certified through the Defense Logistics Information Services Joint Certification Program to access Controlled Unclassified Information, with only one designated Data Custodian per CAGE code permitted to manage access, requiring prior approval of the DD 2345 form and coordination with the DLA-certified POC.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

Solicitation # N6893626Q5175

The Naval Air Warfare Center Weapons Division at China Lake, California, is seeking to procure VxWorks software on a sole-source basis from Wind River, with competition limited to its authorized distributors, under solicitation number N6893626Q5175. The solicitation will be posted on SAM.gov on August 4, 2026, with responses due by August 11, 2026, and is classified under NAICS code 513210. All interested parties must be registered in the System for Award Management (SAM) with an active status at the time of award, and new or updated registrations require a notarized letter identifying the authorized Entity Administrator, which must be submitted within 30 days of registration. Additionally, contractors must be certified through the Defense Logistics Information Services to handle Controlled Unclassified Information. Primary point of contact for inquiries is Virginia Dennison, reachable via email at virginia.j.dennison.civ@us.navy.mil or by phone at 760-793-3307, with Markelle Griffin available as a secondary contact.

Software Publishers

POSTED

DEADLINE