Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Surgical Lubricant Supply and Packaging

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and packaging of 192 pints of surgical lubricant that meets FDA compliance standards and is identified by the National Stock Number 6505001117829. The product must be packaged and labeled in accordance with military specifications to ensure full compliance with Department of Defense requirements. Deliverables are designated for a naval vessel, necessitating strict adherence to procurement and logistical protocols for military use. The item falls under NAICS code 325412, indicating manufacture of pharmaceutical and biological products, and is being handled as a subcontract under the Defense Logistics Agency, part of the Department of Defense. The contract was posted on July 17, 2026, and is managed through the DIBBS system with specific award and delivery identifiers tied to its tracking and fulfillment.

General Info

192 pints of FDA-compliant surgical lubricant, NSN 6505001117829, for naval vessel per DOD specs.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325412 - Pharmaceutical Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and packaging of 192 pints of FDA-compliant surgical lubricant (NSN: 6505001117829) for delivery to a naval vessel, including labeling and military specification compliance.

Similar Contracts

Same NAICS industry code

Medical Electrode Gel Manufacturing and SupplyThe contract entails the manufacture and delivery of a specialized electrode gel designed for EKG applications, requiring the product to be clear, salt-free, non-staining, and corrosion-resistant to ensure optimal performance and patient safety. The gel must be packaged in 8.5 oz tubes, with twelve tubes per box, and must maintain its integrity and effectiveness over a 48-month shelf life, ensuring long-term usability without degradation. Delivery terms specify FOB Destination to Scott AFB, IL, indicating the vendor assumes responsibility for all shipping costs and risks until the product reaches the designated military location. The solicitation is classified as a subcontract under NAICS code 325412, which corresponds to pharmaceutical and medicine manufacturing, and is issued by the Department of Defense through its Medical Supply Chain division. Responses are due by August 3, 2026, with the opportunity posted on July 26, 2026, suggesting a competitive bidding window of approximately one week to secure the supply agreement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacture of Chlorine Test Reagent (DPD Powder Pillows)The contract requires the manufacture of DPD total chlorine test reagent in powder pillow form, specifically designed to meet the Technical Data Package specifications established by the Defense Logistics Agency for use in medical water testing applications. The product must adhere to strict quality control standards to ensure consistent performance, accurate measurement of chlorine levels, and compatibility with certified testing protocols used in military medical facilities. The reagent is intended for deployment in field and clinical settings where reliable water safety verification is critical to health and operational readiness. Production must comply with the NAICS code 325412 for chemical manufacturing, and the place of performance is designated as FPO, 09591-0100, indicating delivery to military logistics channels. The opportunity is structured as a subcontract under the Department of Defense’s Medical Supply Chain, with responses due by August 3, 2026. Manufacturers must demonstrate capability in producing pharmaceutical-grade reagents with validated batch consistency, packaging integrity, and shelf-life stability under operational storage conditions. No set-aside type is specified, meaning the contract is open to all qualified vendors regardless of business size or ownership structure.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SODIUM CHLORIDE INJECTSodium Chloride Injection 0.9% in 250 mL units, packaged 24 bags per purchase group, is being procured under solicitation SPE2DP-26-T-4271 with a delivery requirement of five days FOB destination. The item is regulated by the FDA and must comply with strict packaging and marking standards as defined by Medical Marking Standard No. 1, superseding all references to MIL-STD-129. Each unit must be sealed in commercial-grade containers that protect against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery by common carriers. The product has a non-extendable shelf life of 24 months and must be stored at room temperature with brief exposure to up to 40°C permitted without adverse effect. The item is identified by NSN 6505-01-331-8945 and is subject to zero variance in quantity, with inspection and acceptance occurring at the destination. Multiple manufacturers including B. Braun Medical Inc., ICU Medical Inc., Trillamed LLC, and Cardinal Health 200, LLC are qualified suppliers, each identified by specific NDC numbers and part numbers. All packaging and labeling must conform to the latest Medical Marking Standard No. 1, available through DLA Troop Support, and the solicitation includes requirements for covered defense information. The contracting officer must submit a referral in EBS for product confirmation prior to award, including bidder and manufacturer details.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

ACEPROMAZINE MALEATE IACEPROMAZINE MALEATE INJECTION, VETERINARY, 10MG/ML in 50ML vials, is being procured under solicitation SPE2DP-26-T-4274 for use in cats, dogs, and horses, with explicit prohibition against use in horses intended for human consumption. The unit of issue is a vial (VI), and the contract calls for delivery of two vials, with a firm fixed price of $25.03 per vial, resulting in a total estimated contract value of approximately $1,078. Delivery is required within 62 days after award, FOB destination, to a designated military medical logistics center in Kaiserslautern, Germany. The product must be stored at controlled room temperature, between 20–25°C (68–77°F), and carries a non-extendable shelf life of 36 months as a TYPE I (CODE Q) item. Packaging must strictly adhere to MIL-STD-2073-1E, and all marking must comply with the latest Medical Marking Standard No. 1, superseding MIL-STD-129. As a hazardous material, the product requires GHS-compliant labeling under OSHA’s Hazard Communication Standard (29 CFR 1910.1200), with Safety Data Sheets submitted and approved prior to award. The supplier must also train personnel on SDS and labeling requirements and ensure all packaging and labeling meet the updated Federal Standard No. 313-E. Transportation of the shipment by sea must be conducted using U.S.-flag vessels unless a waiver is granted with prior documentation. The contract includes mandatory compliance with numerous DFARS clauses, including those addressing disclosure of information, whistleblower rights, restrictions on former DoD officials’ compensation, control of government work product, and NIST SP 800-171 cybersecurity requirements. The contractor must provide a Unique Entity Identifier and CAGE code, represent its small business status if applicable, and certify compliance with socioeconomic program requirements. Inspection and acceptance occur at destination, with full responsibility for quality, packaging, and regulatory compliance resting with the supplier. All proposals must be submitted electronically via the DLA Internet Bid Board System by the August 3, 2026 deadline, following DLA’s Master Solicitation for Automated Simplified Acquisitions.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

POVIDONE-IODINE TOPICAPOVIDONE-IODINE TOPICAL SOLUTION, USP, is a regulated pharmaceutical product procured under contract SPE2DP-26-T-4280 for U.S. military use, with each unit being a 4 fluid ounce (118 mL) bottle identified by the unit of issue BT and NSN 6505010672812. The product must comply with stringent technical and quality requirements from the DLA Master List, including a mandatory 36-month shelf life, of which at least 31 months must remain at time of delivery to the first government activity. Labeling must conform to MED.MARKING STD 1A, specifying key elements such as manufacturer and CAGE code, manufacturing and expiration dates, contract and lot numbers, and the unit designation 1 BT = 4 OZ. The product is subject to FDA regulation and requires pre-award referral through EBS for validation. Packaging must be commercial-grade, sealed to prevent damage, and shipped in exterior containers ensuring safe transit at minimal cost, adhering to DLA’s packaging directives over ASTM D3951 when applicable, with all marking strictly following MIL-STD-129 despite references to MMS No. 1. The material is classified as non-hazardous per FED-STD-313 and must be shipped by traceable means only, prohibiting parcel post. Two delivery points are specified: Fort Bragg, NC and Fort Bliss, TX, each requiring shipment within 20 days of contract award with no tolerance for quantity variance. Delivery is FOB destination, with inspection and acceptance occurring at the final location. The solicitation lists Cardinal Health 200, LLC and Purdue Pharma LP as potential manufacturers under NDC 67618-0150-04, and procurement is coordinated through DLA Troop Support, with point of contact Shairy M. Cartagena.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

ZINC OXIDE OINTMENTZinc Oxide Ointment USP, containing 20% zinc oxide in a 28.35 gram collapsible tube, is a topical skin protectant procured under solicitation SPE2DP-26-T-4279 with a requirement for five units of issue. The product must comply with the latest Medical Marking Standard No. 1, be labeled with NDC 67777-0223-11, and be manufactured by Dynarex Corp under part number 1TVZ3. It is subject to a non-extendable shelf life of 36 months as a TYPE I Q-coded item and must be stored at controlled room temperature not exceeding 30°C. Packaging must adhere to DLA Packaging Requirements for Procurement, MIL-STD-129, and ASTM D3951 if non-hazardous, with all markings and labeling controlled by the DLA Master List of Technical and Quality Requirements. The item is regulated by the FDA, requiring referral through EBS for confirmation, and is subject to Covered Defense Information protocols. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, inspection and acceptance occurring at the destination point. The sole delivery address is W51JYU, 0165 CS HHC HHC Combat Sustainment, Bossier City, LA 71111-5397, and shipment must be sent via traceable means, excluding parcel post. The contract specifies a unit price of $5.00 per tube, totaling $25.00, with the original required delivery date set for July 28, 2026. All technical and quality obligations referenced by R-numbers are governed by the DLA Master List in effect on the solicitation issue date, and the product must be palletized in accordance with RP001. Government use only identifiers and tracking codes, including the TCN and SUPP ADD, are included for logistics and accountability purposes, with the contracting office listed as the Department of Defense, Medical Supply Chain PHARM FSA.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

VECURONIUM BROMIDE FORVecuronium Bromide for Injection is a freeze-dried powder containing 10 mg of the active ingredient, supplied in packages of ten vials per unit, with a total shelf life of 24 months. At the time of receipt by the first government activity, the product must have a minimum of 21 months of remaining shelf life, and storage must be maintained at controlled room temperature between 20 to 25°C (68 to 77°F), protected from light and retained in its original carton until use. The item is classified as a Type I (Code M) medical supply with a non-extendable shelf life, and all packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers ensuring safe delivery at the lowest cost to the specified destination, with strict adherence to hazardous materials shipping protocols. The product, manufactured by Hikma Pharmaceuticals USA Inc., is identified by NDC 00143-9234-10 and NSN 6505-01-258-0983, and is required for delivery to JBER, Alaska, under contract SPE2DP-26-T-4283 with a firm delivery date of July 28, 2026. The procurement specifies a fixed quantity of three units totaling two packages, with no variance permitted, and all shipments must be routed through designated government freight and parcel post addresses. Compliance with DLA packaging, technical, and quality requirements, as outlined in the DLA Master List and supporting directives, is mandatory.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

TOLNAFTATE POWDER, UThe contract specifies the procurement of Tolnaftate Powder, USP 1%, in 45-gram units, with a total quantity of two BT units, each equivalent to 45 grams, under solicitation SPE2DP-26-T-4282. The item is designated as a Type I (Code Q) medical product with a strict non-extendable shelf life of 36 months, and packaging must comply with commercial standards as outlined in the procurement document, ensuring protection against damage and secure transit via common carrier at the lowest cost to the delivery point. All packaging and labeling must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and includes proper identification and marking requirements for defense-related materials. Delivery is required FOB destination within five days, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The item is sourced from Geri-Care Pharmaceuticals Corp. under NDC57896-0199-45, and the contract mandates compliance with DLA’s Technical and Quality Requirements as defined in the DLA Master List, with applicable provisions for Covered Defense Information. The place of performance is Mountain Home AFB, ID, and the contracting office is the Department of Defense’s Medical Supply Chain Pharm FSA, with point of contact Imerah Burnett.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

RINGER'S INJECTION, LACRINGER'S INJECTION, LACTATED, USP, 1000ML, in packs of 12 units per case, is subject to strict packaging and marking requirements mandated by the Department of Defense. Each unit must be sealed in a protective container to prevent damage or breakage, and all shipments must be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point. Packaging must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all markings must adhere to the latest edition of this standard as published by DLA Troop Support. The product is regulated by the FDA and requires confirmation by a product specialist prior to award, with bidder and manufacturer details submitted through EBS. The item has a non-extendable shelf life of 30 months and must be stored at room temperature (25°C), with brief exposure to up to 40°C permitted without adverse effects. It is prohibited from freezing and must be protected from excessive heat. The contract specifies a quantity of 2 packaging groups, each containing 12 units, for delivery to Dyess AFB within 20 days under FOB destination terms with zero variance allowed. Inspection and acceptance occur at the delivery point, and the item is identified by NSN 6505-01-330-6267 and manufacturer part number NDC00264-7750-00 under B. BRAUN MEDICAL INC. The solicitation, issued under contract SPE2DP-26-T-4292, has an August 3, 2026 response deadline and falls under NAICS code 325412 for pharmaceutical manufacturing.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of test strips and color charts for urine analysis, detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen. Each unit of issue is a bottle containing 100 strips, and the item is identified by NSN 6550-01-221-5400 with a purchase quantity of four bottles. The product must comply with stringent technical and quality requirements referenced in the DLA Master List, and packaging must adhere to commercial standards as well as the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container, and shipping containers must ensure safe, cost-effective delivery to the specified FPO address. The item is classified as a Type I (Code K) with a non-extendable shelf life of 18 months, and no more than two months may have elapsed between the date of manufacture and the delivery date to the government. All labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C guidelines. The solicitation was issued under SPE2DS-26-T-269W with a response deadline of August 3, 2026, and delivery is required within 20 days after award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

DEXTROSE, POTASSIUM CHLThe contract specifies the procurement of 1000 mL sterile injection solution containing 5 percent dextrose, 0.15 percent potassium chloride, and 0.45 percent sodium chloride, manufactured by Baxter Healthcare Corporation under NDC 00338-0671-04 and part number 2B1654X, packaged in units of 14 per pack (PG), with a total quantity of one unit. The item is regulated by the FDA and subject to strict packaging, marking, and shelf-life requirements; it must have a non-extendable 24-month shelf life and be commercially packaged to protect against damage during transit. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Hazardous material handling protocols under FED-STD-313 and TQ requirement IP025 apply if applicable. The item must be palletized in accordance with DLA packaging requirements, shipped via the fastest traceable means excluding parcel post, and delivered FOB destination to Fort Stewart, Georgia within 20 days of contract award. The required delivery date is July 24, 2026, with zero variance allowed in quantity. The solicitation number is SPE2DP-26-T-4278, with a response deadline of August 3, 2026, and the North American Industry Classification System code is 325412. Government use designation and shipping instructions include specific codes and identifiers for logistics and tracking purposes.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

CHLORINE TEST REAGEThe contract specifies the procurement of Chlorine Test Reagent, a DPD total chlorine reagent supplied in 100 powder pillows, each designed for a 10 mL sample size, with the unit of issue being one package containing 100 pillows. The item is identified by NSN 6550-01-460-7597 and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It is subject to DLA packaging standards, including commercial packaging for all medical acquisitions, requiring each unit to be sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate. All markings must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must include the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. The item is classified as a TYPE I (CODE S) with a mandatory 60-month shelf life that is non-extendable, and no more than eight months may have passed between the date of manufacture and the date of delivery to the government. The solicitation, issued under SPE2DS-26-T-269Y on July 26, 2026, requires delivery within 20 days after order and is managed by the Department of Defense’s Medical Supply Chain, with Seth Tootell as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Secure Transportation and Delivery to FPO AddressThe contract entails the secure transportation and delivery of hazardous polyurethane coating to the military postal address FPO AP 96607, with the contractor assuming full financial and operational responsibility for the shipment from origin to final destination. This includes compliance with all applicable safety, handling, and regulatory standards for hazardous materials, as well as bearing all costs and risks associated with transit, including potential delays, damage, or loss. The work falls under NAICS code 484220, classifying it as a specialized truck transportation service, and is issued as a subcontract through the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 26, 2026, with responses required by August 3, 2026, and performance is required at the specified FPO location with zip code 96607.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, and marking services for polyurethane coating in full compliance with MIL-STD specifications, as it is classified as a hazardous material. The work must adhere to all military standards for handling, containment, and identification to ensure safe transportation and storage within defense supply chains. This subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO address with ZIP code 96607. The NAICS code 561910 indicates the scope falls under other support services for waste management and remediation, reflecting the specialized nature of hazardous material handling. Bidders must submit proposals by the deadline of August 3, 2026, and are expected to demonstrate capability in meeting strict military regulatory requirements for hazardous materials. The solicitation, accessible via the provided DIBBS link, targets qualified subcontractors with proven experience in military-compliant packaging systems. While no set-aside type is specified, the contract supports the Department of Defense’s logistical needs and demands precise adherence to federal and military documentation, labeling, and safety protocols throughout the entire packaging lifecycle.

Packaging and Labeling Services

POSTED

DEADLINE

Qualified Polyurethane Coating Manufacturer (QPL-Approved)The contract requires the manufacture and supply of 187 units of a qualified polyurethane coating that meets military specifications for NSN 8010016525908, with the product required to be QPL-approved to ensure compliance with defense standards. The work is classified as a subcontract under NAICS code 325510 and is being managed by the Defense Logistics Agency under the Department of Defense, with performance expected to take place at an FPO address with the ZIP code 96607. The solicitation was posted on July 26, 2026, and responses must be submitted by August 3, 2026, indicating a short window for proposal submission. The contract is not subject to a specific set-aside classification, and the primary requirement centers on delivering a certified coating that aligns with established military quality and performance benchmarks for logistical use.

Paint and Coating Manufacturing

POSTED

DEADLINE

Government Bill of Lading and WAWF Invoicing SupportThe contract encompasses the preparation and management of shipping documentation and invoicing through the Wide Area Workflow system, with particular emphasis on compliance with DFARS Appendix F requirements for receiving reports. This support work is critical to ensuring accurate, timely, and audit-compliant documentation for defense logistics operations, specifically tied to government shipments processed under the Defense Logistics Agency. All invoicing and documentation must be fully integrated with WAWF procedures to meet federal contracting standards and facilitate seamless receipt and payment processes. The contract is structured as a subcontract with a North American Industry Classification System code of 541214, indicating professional, scientific, and technical services related to accounting, bookkeeping, and billing. Performance is required at FPO, zip code 96616, consistent with military logistics and overseas supply chain needs. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, allowing potential vendors a limited window to submit proposals. The contracting authority is the Department of Defense, under the Defense Logistics Agency, underscoring the critical and high-stakes nature of the services required.

Payroll Services

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires compliance with military standards for the packaging, labeling, and preparation of condensing units for shipment, encompassing palletization, preservation techniques, and proper marking to ensure safe transportation and handling. All work must conform to applicable defense specifications to guarantee readiness and durability under operational conditions. The place of performance is designated as FPO with a zip code of 96616, indicating a military mail destination, and the NAICS code 493190 classifies this as other warehousing and storage services under the Department of Defense. This is a subcontract opportunity issued by the Defense Logistics Agency, with bids required by August 6, 2026, and the solicitation was posted on July 26, 2026. No set-aside designations or specific organizational requirements are specified, and the exact point of contact details are not provided in the posting.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the preparation and submission of Safety Data Sheets for all hazardous materials linked to a condensing unit or its components before the award is finalized. This obligation is critical to ensuring regulatory compliance and the safe handling, storage, and transport of hazardous substances throughout the supply chain. The work must be completed and delivered by the response deadline of August 6, 2026, under a subcontract structure governed by the Defense Logistics Agency within the Department of Defense. Performance is designated to occur at FPO, ZIP 96616, aligning with military logistics operations. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service category, specifically under other scientific and technical consulting services, suggesting the need for specialized expertise in chemical compliance and documentation. There is no set-aside designation, meaning all qualified entities may bid regardless of business size or owner demographics. The solicitation is open for response until the deadline, and failure to submit complete and accurate SDS documentation prior to award could result in disqualification or contract non-compliance. All submissions must meet federal and international standards for hazardous material identification and safety disclosure.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Refrigeration Equipment Supply (Condensing Unit)The contract specifies the supply of a single military-specification condensing unit identified by NSN 4130014795974 for installation aboard the USS RONALD REAGAN CVN 76. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a solicitation identifier of SPE8E826T4847. The equipment is intended for critical cooling systems aboard the aircraft carrier and must meet rigorous military standards to ensure operational reliability in demanding maritime environments. Performance is required at FPO 96616, indicating delivery to a naval vessel at sea or in a designated military logistics location. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, allowing a limited window for qualified vendors to submit proposals. The North American Industry Classification System code 333414 categorizes this as industrial and commercial ventilation and air conditioning equipment manufacturing, underscoring the technical specificity required. No set-aside status is indicated, meaning any eligible contractor may respond. The contract does not list a point of contact, suggesting procurement is handled through standardized DLA procedures. Delivery of this unit is time-sensitive and mission-critical, as it supports core shipboard climate control infrastructure necessary for crew safety, electronics operation, and mission readiness.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Packaging, Marking, and Palletization ServicesThe contract requires full compliance with MIL-STD-2073-1E and DLA RP001 standards for the packaging, preservation, palletization, and marking of military equipment and supplies, ensuring all procedures meet strict defense logistics requirements. This includes the application of data matrix barcodes for accurate traceability and the exclusive use of non-plastic dunnage materials to uphold environmental and operational integrity. All identification markers must be properly affixed and legible, and packaging must withstand rigorous handling and storage conditions typical of military supply chains. The work is to be performed at Fort Hood, Texas, with a response deadline of August 6, 2026, and is structured as a subcontract under NAICS code 423830. The Defense Logistics Agency, part of the Department of Defense, is issuing this solicitation to secure qualified contractors capable of delivering defense-compliant packaging solutions. There is no designated set-aside status, and bidders must be prepared to meet all technical and regulatory specifications without exception, with full accountability for adherence to federal military standards.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThe contract entails the development and submission of hazard warning labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA’s Hazard Communication Standard and DFARS requirements. This work supports the safe handling, storage, and transportation of hazardous materials within defense-related operations, requiring precise adherence to federal safety and regulatory protocols. The deliverables must accurately reflect chemical hazards, protective measures, and emergency procedures as mandated by current regulatory frameworks. The opportunity is issued as a subcontract under the NAICS code 541690 and is managed by the Defense Logistics Agency within the Department of Defense. Performance is located at Fort Hood, Texas, with a zip code of 76544-5060. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. All submissions must meet strict compliance benchmarks to support DLA’s mission of maintaining safety and regulatory integrity across military supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Manufacturing of Identification MarkersThe contract calls for the manufacture of 15 units of Type I Identification Markers designated by NSN 7690-01-279-7613 and part number Z-PSR3, with strict adherence to military-grade specifications for shelf-life, durability, and material composition. These markers are intended for use in defense applications where long-term reliability and environmental resistance are critical. The work is to be performed at Fort Hood, Texas, with a zip code of 76544-5060 as the designated place of performance. The solicitation is classified as a subcontract under NAICS code 323117, indicating it falls within the printing and related support activities sector. The Defense Logistics Agency, operating under the Department of Defense, is the contracting organization responsible for this requirement. Proposals must be submitted by August 6, 2026, with the opportunity posted on July 26, 2026, providing a 12-day window for responses.

POSTED

DEADLINE

Supply of FIR Sensing Element (NSN 6350375306236)The contract entails the supply of ten units of a Forward Looking Infrared (FIR) sensing element identified by National Stock Number 6350375306236, manufactured to meet stringent military specifications and packaging standards. The deliverables must comply with all applicable labeling requirements and cybersecurity protocols to ensure operational integrity and information security. Delivery is specified under FOB destination terms, meaning the seller assumes all costs and risks until the items reach the designated delivery point. The place of performance is listed as FPO with ZIP code 09595, indicating delivery to a military post office location, typically serving deployed or overseas military units. This is a subcontract solicitation issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 335311 for electronic component manufacturing. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026. bidders must ensure full adherence to technical, logistical, and regulatory criteria outlined in the military requirements, as noncompliance may result in disqualification or contract failure. The contract is accessible via the DIBBS platform, and all proposals must be submitted through the official portal prior to the deadline.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Hazard Communication & Labeling Compliance SupportThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard for all materials associated with delivered items. Compliance must ensure accurate, consistent, and legally valid communication of chemical hazards to end users, particularly within the Department of Defense supply chain. The work is classified as a subcontract under NAICS code 541690 and is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to be conducted at FPO, ZIP 09595, indicating potential support for military operations or installations overseas. All deliverables must align with federal regulatory requirements to maintain safety and legal adherence across the procurement lifecycle. Responses must be submitted by August 6, 2026, and the solicitation is open for subcontractors seeking to support defense logistics through compliance services. The contract does not specify a set-aside status or point of contact, leaving details for proposers to infer from the official solicitation link. Participation requires demonstrated expertise in hazardous materials documentation, familiarity with defense acquisition regulations, and the ability to synchronize labeling and SDS updates with delivery schedules. Failure to meet regulatory standards could result in non-compliance penalties or delivery rejection, making precision and timeliness critical.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE