SURVIVAL KIT, INDIVIDUA

SURVIVAL KIT,INDIVIDUAL
SURVIVAL KIT, INDIVIDUAL
.
UNIT OF ISSUE EACH, EA
.
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE GOVERNMENT. . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
SHALL BE IN ACCORDANCE WITH MIL-S-37205
DATED 26 MARCH 1976, EXCEPT AS FOLLOWS:
.
PARA. 2.1, UNDER "SPECIFICATIONS FEDERAL"<(>,<)>
DELETE ALL REFERENCE TO L-P-375, L-P-378<(>,<)>
PPP-B-636, PPP-T-60 AND PPP-T-97.
ADD UNDER "SPECIFICATIONS": "MIL-DTL-117G
BAGS, RESEALABLE".
.
UNDER "STANDARDS MILITARY", DELETE ALL
REFERENCE TO MIL-STD-105 AND MIL-STD-129.
ADD THE FOLLOWING NEW LISTING:
"OTHER GOVERNMENT DOCUMENT.”
.
"MEDICAL MARKING STANDARD NO. 1D"
.
ADD THE FOLLOWING NEW PARAGRAPH: "2.2
NON-GOVERNMENT PUBLICATIONS.
"ASTM INTERNATIONAL"
"D 1974 STANDARD PRACTICE FOR METHODS
OF CLOSING, SEALING, AND REINFORCING
FIBERBOARD SHIPPING CONTAINERS.
.
"D 5118 STANDARD PRACTICE FOR FABRICATION
OF FIBERBOARD SHIPPING BOXES.
.
"D 5330 STANDARD SPECIFICATION FOR
PRESSURESENSITIVE TAPE FOR PACKAGING<(>,<)>
FILAMENT-REINFORCED."
.
(APPLICATION FOR COPIES SHOULD BE ADDRESSED
TO ASTM INTERNATIONAL, 100 BARR HARBOR
SPE2DS-26-T-414R
SECTION B
DRIVE, WEST CONSHOHOCKEN, PA 19428-2959.)"
.
"AMERICAN NATIONAL STANDARDS INSTITUTE."
"ANSI/ASQC Z1.4 SAMPLING PROCEDURES AND
TABLES FOR INSPECTION BY ATTRIBUTES."
.
(APPLICATION FOR COPIES SHOULD BE ADDRESSED
TO THE AMERICAN NATIONAL STANDARDS INSTITUTE<(>,<)>
11 WEST 42ND STREET, NEW YORK, NY 10036-8002.)"
.
3.2.1 DELETE FIRST 2 SENTENCES AND
SUBSTITUTE: "CONTAINERS SHALL BE MOLDED
OF LOW DENSITY POLYETHYLENE CONFORMING
TO L-P-390, TYPE I, CLASS 1, GRADE 1.
THE THICKNESS OF THE PLASTIC OF THE
FINISHED CASE SHALL BE 0.052-0.072 INCH."
.
3.2.2, DELETE FIRST SENTENCE ENTIRELY
AND SUBSTITUTE: "POLYETHYLENE BAGS SHALL
BE CONSTRUCTED FROM FLAT TUBING CONFORMING
TO MIL-DTL-117G, TYPE I CLASS B, STYLE 2."
.
DELETE PARA. 3.2.3 ENTIRELY AND SUBSTITUTE:
"3.2.3 TAPE FOR TOP AND BOTTOM SECTION
HANDLES. TAPE SHALL CONFORM TO ASTM D 5330<(>,<)>
TYPE II. LENGTH OF HANDLE FOR TOP SECTION.
SHALL BE 15-3/4 INCHES PLUS/MINUS 1/4 INCH;
LENGTH OF HANDLE FOR BOTTOM SECTION SHALL
BE 17-1/2 INCHES PLUS/MINUS 1/4 INCH. A
LENGTH OF TAPE CONFORMING TO ASTM D 5330<(>,<)>
TYPE II, SHALL BE APPLIED AS A SHIELD TO
THE EXPOSED ADHESIVE AREA OF EACH HANDLE."
.
DELETE PARA. 3.3 ENTIRELY AND SUBSTITUTE:
"3.3 KIT CONTENTS. ALL SHELF LIFE
COMPONENTS SHALL HAVE AT LEAST 12 MONTHS
OF SHELF LIFE REMAINING AT TIME OF
ASSEMBLY OF THE KIT."
.
DELETE PARA. 3.3.1 ENTIRELY.
.
3.3.2.1 ALUMINUM FOIL. ADD THE FOLLOWING
SENTENCE: "ALUMINUM CONFORMING TO THE
REQUIREMENT OF QQ-A-1876, TYPE III, CLASS
B WILL BE ACCEPTABLE AS AN ALTERNATE.
.
3.2.2.2. FISH LINE AND HOOKS. DELETE 1ST
AND 2ND SENTENCES ENTIRELY AND SUBSTITUTE:
"TWO FISH HOOKS SHALL BE SIZE 6, EXTRA
LONG SHANK, FORGED OFFSET, RING DIE WITH
A STRAIGHT POINT. HOOKS SHALL BE SNELLED
TO EACH END OF A 10 POUND NYLON TEST LINE
6 YARDS LONG (PLUS/MINUS 3 INCHES.
.
3.3.2.3 IN HEADING, 1ST LINE, DELETE
"20'S" AND SUBSTITUTE "(1 BOOK OF 20
MATCHES)".
.
DELETE PARA. 3.3.2.4 ENTIRELY AND
SUBSTITUTE: "3.3.2.4 HAND CLEANER. SHALL
BE A READY-TOUSE WET TOWEL SUITABLE FOR
CLEANING THE FACE, HANDS AND BODY WITHOUT
WATER. SHALL CONFORM TO THE REQUIREMENTS
OF CID A-A-461."
.
3.3.2.5, DELETE 1ST SENTENCE ENTIRELY AND
SUBSTITUTE: "SHALL CONFORM TO THE
REQUIREMENTS OF CID A-A-20202, TYPE II<(>,<)>
CLASS 1, STYLE A." IN 2ND SENTENCE, DELETE
"SECTION 5 OF EE-B-575" AND SUBSTITUTE
SPE2DS-26-T-414R
SECTION B
"SECTION 4.1 OF CID A-A-20202".
.
DELETE PARA. 3.3.2.6 ENTIRELY AND
SUBSTITUTE: "3.3.2.6 PAN-COATED CHOCOLATE
DISK, 1-1/2 OZ. THE DISK SHALL CONFORM
TO THE REQUIREMENTS OF CID A-A-20177<(>,<)>
TYPE VI. EACH DISK SHALL BE SUPPLIED IN
A SEALED POLYETHYLENE BAG AS SPECIFIED
IN 3.2.2."
.
DELETE PARA. 3.5 ENTIRELY AND SUBSTITUTE:
"3.5 IDENTIFICATION CARD. THE
IDENTIFICATION CARD SHALL PROVIDE A LISTING
OF THE KIT COMPONENTS. THE CARD SHALL BE
AS SHOWN ON DPSC DRAWING 24336. THE
INFORMATION SHALL BE PRINTED WITH BLACK
WATERPROOF INK ON STRIPS OF WATERPROOF
PAPER 4-1/2" LONG BY 2-3/4" WIDE. THE PRINT
SIZE SHALL NOT BE LESS THAN 6 POINT STANDARD
UPPERCASE TYPE. LAMINATION WITH CLEAR
PLASTIC MAY BE USED IN LIEU OF WATERPROOF
PAPER. THE CARD SHALL BE PRINTED ON BOTH
SIDES. EACH IDENTIFICATION CARD SHALL BE
CAPABLE OF PASSING THE IMMERSION TEST
SPECIFIED IN 4.3.2."
.
DELETE PARA. 3.6.2 ENTIRELY AND SUBSTITUTE:
"3.6.2 COMPRESS AND BANDAGE, CAMOUFLAGED<(>,<)>
4 BY 4 INCHES. IF THE COMPRESS AND BANDAGE<(>,<)>
PROPERLY PACKAGED IN A HEAT-SEALED
POLYETHYLENE PACKAGE, IS FURTHER PACKAGED
IN A PAPERBOARD UNIT CARTON, THE SEALED
POLYETHYLENE PACKAGE SHALL BE REMOVED FROM
THE PAPERBOARD CARTON PRIOR TO INSERTION
INTO THE KIT CONTAINER."
.
DELETE PARA. 3.6.3 ENTIRELY AND SUBSTITUTE:
"3.6.3 COMPONENTS REQUIRING ADDITIONAL
PROTECTION. SEVERAL COMPONENTS REQUIRE
PACKAGING IN A SEALED POLYETHYLENE BAG AS
SPECIFIED IN 3.2.2.
.
"3.6.3.1 6510-01-060-1639 ADHESIVE TAPE.
ADHESIVE TAPE SHALL BE FLATTENED PRIOR TO
INSERTION INTO THE BAG.
.
"3.6.3.2 6850-01-618-1533 WATER
PURIFICATION TABLETS. THE SEALED BOTTLE
CONTAINING WATER PURIFICATION TABLETS
SHALL BE PACKAGED IN A SEALED POLYETHYLENE
BAG."
.
ADD THE FOLLOWING NEW PARA.: "3.6.4 HAND
CLEANER. THREE SEALED FOIL HAND CLEANER
PACKETS SHALL BE STACKED AND SECURED ACROSS
THE MIDDLE BY RUBBER BAND."
.
APPLICABLE TO DPSC DRAWING 24336: REVISE
THE COMPONENT LISTING AS FOLLOWS: ADD
"6505-00-100-9985 ASPIRIN TABS<(>,<)>
6505-00-982-9196 POVIDONE-OINTMENT AND
6505-01-663-2648 ERYTHROMYCIN OPHTHALMIC
OINTMENT."
.
DELETE "7610-01-301-5259 LIST" AND
SUBSTITUTE "N/A LIST MEDICAL INSTR/CONTENTS
USED WITH NSN 6545-00-139-3671". THIS MUST
BE A WATERPROOF SHEET OR CARD.
.
DELETE "8925-01-008-0960 CANDY, CHOCOLATE"
SPE2DS-26-T-414R
SECTION B
AND SUBSTITUTE "8925-01-331-3705 CANDY<(>,<)>
MILK CHOCOLATE".
.
DELETE "6510-00-200-3080 COMPRESS AND
BANDAGE, CAMOUFLAGED, 4 IN X 4 IN"
AND SUBSTITUTE "6510-01-657-5085
COMPRESS AND BANDAGE, 4 IN X 6 IN".
.
4.2.1, 2ND LINE, DELETE "MIL-STD-105" AND
SUBSTITUTE "ANSI/ASQ Z1.4".
.
4.2.2.1, AFTER TABLE II, ADD THE FOLLOWING:
"ADDITIONAL FIRST ARTICLE TESTING REQUIREMENTS.
FIRST ARTICLE TESTING SHALL CONSIST OF
EXAMINATION OF THE CASE AND HANDLES AND
VERIFICATION THAT ALL REQUIRED COMPONENTS ARE
INCLUDED WITHIN THE KIT. ALL COMPONENTS MUST
BE IN ACCORDANCE WITH THE PARTICULAR
SPECIFICATION REQUIREMENTS FOR EACH ITEM<(>,<)>
WHETHER GFM OR CONTRACTOR -SUPPLIED. COMPONENTS
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment MUST MEET INDIVIDUAL PACKAGING REQUIREMENTS. SHELF LIFE COMPONENTS MUST MEET SHELF LIFE REQUIREMENTS." . DELETE PARA. 4.2.2.2, INCLUDING TABLE III<(>,<)> ENTIRELY AND SUBSTITUTE: "4.2.2.2 INSPECTION OF PACKAGING. THE SAMPLING OF THE PACKAGING AND MARKING FOR SHIPMENT AND STORAGE SHALL BE IN ACCORDANCE WITH THE QUALITY ASSURANCE PROVISIONS OF THE APPLICABLE CONTAINER SPECIFICATION AND THE MARKING REQUIREMENTS OF MEDICAL MARKING STANDARD NO. 1C." . DELETE PARA. 4.2.2.2.1 ENTIRELY. . 4.2.3, 2ND LINE, DELETE "MIL-STD-105" AND SUBSTITUTE "ANSI/ASQ Z1.4". . DELETE PARA. 4.3.1 ENTIRELY AND SUBSTITUTE: "4.3.1 LEAKAGE TEST. COMPONENT POLYETHYLENE BAGS FILLED AND SEALED AS SPECIFIED HEREIN SHALL BE SUBMERGED TO A DEPTH OF ONE FOOT IN TAP WATER FOR 15 MINUTES. BAGS SHALL BE REMOVED, OPENED AND EXAMINED FOR EVIDENCE OF WATER LEAKAGE. FILLED BAGS MAY BE TESTED EITHER PRIOR TO OR AFTER ASSEMBLY IN KIT AT OPTION OF CONTRACTOR." . DELETE PARAS. 5.1 THROUGH 5.3.2 ENTIRELY AND SUBSTITUTE:
. "5.1 PRESERVATION. PRESERVATION SHALL BE MILITARY, AS SPECIFIED (SEE 6.1). . "5.1.1 MILITARY. "5.1.1.1 UNIT. KIT (KT). ONE SURVIVAL KIT, AS SPECIFIED, CONSTITUTES ONE UNIT. EACH SURVIVAL KIT SHALL BE PACKAGED IN A SNUG- FITTING BOX CONFORMING TO PPP-B-566 OR PPP-B-676. CLOSURE SHALL BE AS SPECIFIED IN THE APPLICABLE BOX SPECIFICATION. . "5.2 PACKING. PACKING SHALL BE LEVEL A OR B, AS SPECIFIED (SEE 6.1). .
SPE2DS-26-T-414R
SECTION B
"5.2.1 LEVEL A. NINETY-SIX UNITS SHALL
BE PACKED IN AN EXTERIOR CONTAINER
DESIGNED FOR A TYPE 2 LOAD AND CONSTRUCTED
IN ACCORDANCE WITH ASTM D 5118, CLASS
WEATHER-RESISTANT. CLOSURE SHALL BE AS
SPECIFIED IN ASTM D 1974, CLOSURE METHOD
1D. EACH BOX SHALL BE WATERRESISTANT AS
SHECIFIED IN ASTM D 1974. BOX DESIGN
SHALL INCLUDE TOP AND BOTTOM PADS AND, WHEN
UNITS ARE STACKED IN TWO OR MORE TIERS, A
PAD BETWEEN EACH TIER. PADS SHALL BE TYPE
CF, CLASS DOMESTIC, VARIETY SW OR DW.
.
"5.2.2. LEVEL B. NINETY-SIX UNITS SHALL
BE PACKED IN AN EXTERIOR CONTAINER DESIGNED
FOR A TYPE 2 LOAD AND CONSTRUCTED IN
ACCORDANCE WITH ASTM D 5118, CLASS DOMESTIC.
CLOSURE SHALL BE AS SPECIFIED IN ASTM D 1974<(>,<)>
CLOSURE METHOD 1E. BOX DESIGN SHALL INCLUDE
TOP AND BOTTOM PADS AND, WHEN UNITS ARE
STACKED IN TWO OR MORE TIERS, A PAD BETWEEN
EACH TIER. PADS SHALL BE TYPE CF, CLASS
DOMESTIC, VARIETY SW OR DW.
.
"5.2.3 PACKING VARIATION PERMITTED. IF THE
REQUIRED NUMBER OF UNITS TO BE SHIPPED IS
LESS THAN THE NUMBER OF UNITS SPECIFIED TO
BE OVERPACKED IN AN EXTERIOR CONTAINER<(>,<)>
SUCH UNITS SHALL BE PACKED IN AN EXTERIOR
CONTAINER OF SUITABLE SIZE AND DESIGN<(>,<)>
ACCEPTABLE TO A COMMON CARRIER, WHICH WILL
INSURE SAFE DELIVERY TO DESTINATION.
.
"5.3 MARKING. "5.3.1 INDIVIDUAL
COMPONENTS. EACH INDIVIDUAL COMPONENT
SHALL BE MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED
HEREIN.
.
"5.3.2 UNIT. EACH UNIT (KIT) SHALL BE
MARKED AS SPECIFIED IN MEDICAL MARKING
STANDARD NO. 1C. MARKING SHALL INCLUDE
THE SHELF LIFE MARKING OF THE COMPONENT
WITH THE SHORTEST REMAINING SHELF LIFE AT
TIME OF ASSEMBLY, AND THE EXPIRATION DATE.
DATE OF MANFUACTURE SHALL BE PREFIXED BY
'MFD DATE', AND EXPIRATION DATE SHALL BE
PREFIXED BY EXPIRATION DATE'. EXAMPLE: MFD
DATE 02/05. EXP DATE 02/08
.
"5.3.3 EXTERIOR (SHIPPING) CONTAINER
AND UNITIZED LOAD.
"5.3.3.1 EACH EXTERIOR (SHIPPING)
CONTAINER AND UNITIZED LOAD SHALL BE
MARKED AS SPECIFIED IN MEDICAL MARKING
STANDARD NO. 1C. MARKING SHALL INCLUDE
THE SHELF LIFE MARKING OF THE COMPONENT
WITH THE SHORTEST REMAINING SHELF LIFE
AT TIME OF ASSEMBLY, AND THE EXPIRATION
DATE. DATE OF MANUFACTURE SHALL BE
PREFIXED BY 'MFD DATE', AND EXPIRATION
DATE SHALL BE PREFIXED BY EXP DATE'.
EXAMPLE: MFD DATE 02/05. EXP 02/08
.
"5.3.3.2 IN ADDITION, DEPARTMENT OF
TRANSPORTATION (DOT) MARKINGS ARE REQUIRED
ON EACH EXTERIOR (SHIPPING) CONTAINER OF
KITS HAVING A GROSS WEIGHT EXCEEDING 50
LBS. THE FOLLOWING MARKINGS SHALL APPEAR
ON THE IDENTIFICATION-MARKED SIDE OF EACH
SPE2DS-26-T-414R
SECTION B
CONTAINER, IN A LOCATION WHICH RENDERS THE
MARKINGS CLEARLY VISIBLE: MATCHES, SAFETY /
UN1944 / HC 4.1 / PG III.
.
"5.4 GENERAL. "5.4.1 EXTERIOR CONTAINER.
EXTERIOR CONTAINER (SEE 5.2.1 AND 5.2.2)
SHALL BE OF MINIMUM TARE AND CUBE CONSISTENT
WITH THE PROTECTION REQUIRED.
.
"5.4.2 PACKAGING INSPECTION. INSPECTION
OF THESE PACKAGING REQUIREMENTS SHALL BE
IN ACCORDANCE WITH PARA. 4.2.2.2."
.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD002, COVERED DEFENSE INFORMATION APPLIES
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-S-37205 NOT 1 REVISION NR DTD 10/15/1990 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 89875 24336 REVISION NR J DTD 11/30/2005 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018248969 0001 EA 291.000
NSN/MATERIAL:6545001393671
DELIVERY (IN DAYS):0173
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE2DS-26-T-414R
SECTION B
PR: 7018248969 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6545-00-139-3671 Quantity: 291 EA Purchase Request: 7018248969QTY: 291 Delivery: 173 days ADO