Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SWAGING SLEEVE, WIRE

Active
SPE4A7-26-T-593EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 30 swaging sleeves, wire, identified by NSN 4030011377169 and part number MS51844-42, under solicitation SPE4A7-26-T-593E, with a delivery requirement of 130 days from award date and an original delivery deadline of January 19, 2027. The item must be shipped FOB origin to the designated delivery point at 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, where inspection and acceptance will occur. Packaging and preservation must strictly adhere to MIL-STD-2073-1E, utilizing climate-controlled dry storage with no preservation or wrap materials, and all packaging must comply with DLA’s RP001 packaging requirements. Marking must follow MIL-STD-129 with no special markings required, and all containers must bear machine-readable barcodes. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for limited functional uses such as batteries, instruments, and sensors as defined by NAVSEA 5100-003D, which require a secondary containment boundary for portable devices. Sampling for quality verification must comply with MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Inspection and acceptance are performed by the Government at the destination, and the contractor must ensure zero non-conformances in the sample lot unless otherwise specified. The item must be manufactured and delivered in compliance with tailored quality requirements, including physical identification and bare item marking, and all technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The contractor must comply with all applicable cybersecurity regulations including NIST SP 800-171 and DFARS 252.204-7012, safeguarding covered defense information and reporting cyber incidents within 72 hours. Use of U.S.-flag vessels for transportation is required, and contractors must provide documentation confirming vessel flag status.

General Info

30 swaging sleeves MS51844-42 delivered by Dec 9, 2026, zero non-conformances, strict mercury prohibitions, FOB origin, MIL-STD compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-593E Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
RICHARD ELLERY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWAGING SLEEVE,WIRE
SLEEVE, SWAGING.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TECHNICAL DATA:
MS51844-42
IDENTIFY TO:
SAMPLING:
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY FREE REQUIREMENTS:
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS51844E(1) NOT 1 REVISION NR E DTD 02/03/2018
SPE4A7-26-T-593E
SECTION B
PART PIECE NUMBER: P/N MS51844-42
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017147890 0001 EA 30.000
NSN/MATERIAL:4030011377169
DELIVERY (IN DAYS):0130
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
SPE4A7-26-T-593E
SECTION B
PR: 7017147890 PRLI: 0001 CONT’D
TRACY CA 95304-5000
US
Need Ship Date:12/09/2026 Original Required Delivery Date:01/19/2027
SPE4A7-26-T-593E NSN/Part Number: 4030-01-137-7169 Quantity: 30 EA Purchase Request: 7017147890QTY: 30 Delivery: 130 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
High-Reliability Component Supply (Item 0001-S00000061)The contract entails the supply of a high-reliability component designated as Item Number 0001-S00000061, with stringent requirements for quality assurance, comprehensive documentation, and full compliance with military standards. The component must meet exacting technical and performance specifications to ensure operational readiness and durability under demanding conditions, typical of defense applications. All deliverables must be accompanied by certified test reports, material certifications, and traceability records to validate conformance to applicable military and industry specifications. This is a subcontract awarded under the NAICS code 332999, classified as an Other Miscellaneous Manufacturing category, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 31, 2026, allowing suppliers a one-month window to submit proposals. The place of performance and specific point of contact details are not provided, but the contract is accessible through the DIBBS system at the specified URL, and all offerors are expected to adhere to federal procurement regulations and defense-specific supply chain protocols without set-aside restrictions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
DIBBS
Specialized Component Procurement (Item 0001-S00000052)The contract solicits the procurement and delivery of a specialized component identified as Item Number 0001-S00000052, with strict requirements for traceability and full compliance with defense specifications. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, and the work must be performed in accordance with the rigorous standards expected for defense-related components. The procurement is open for response until August 31, 2026, and the component must be delivered to the designated destination as specified in the contract terms. All submitted proposals must demonstrate adherence to applicable defense regulations, including documentation of material sourcing and manufacturing processes to ensure end-to-end accountability. The NAICS code 332999 indicates the category covers other fabricated metal product manufacturing, aligning with the nature of this specialized part. The solicitation is accessible through the DIBBS portal, and bidders are expected to meet all technical, compliance, and delivery obligations without deviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
DIBBS
Manufacturing and Supply of Filter Elements (Fluid)The contract requires full-cycle manufacturing, quality control, packaging, and delivery of 1,880 fluid filter elements annually, with a minimum of 470 units delivered each year, all in strict compliance with defense standards. The work must adhere to rigorous technical and regulatory requirements typical of defense applications, ensuring reliability, performance, and traceability throughout production. The subcontract is issued under NAICS code 332999 and fall under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. All deliveries must meet exacting defense compliance specifications, and the contractor is expected to maintain full accountability from raw material sourcing to final shipment. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. The contract does not specify a set-aside designation, meaning it is open to all qualified entities regardless of business size or certification status. The place of performance and point of contact details are not provided, but the work will be executed under the oversight of the Department of Defense and must align with its operational and logistical frameworks. Bidders must demonstrate proven capability in high-integrity manufacturing for defense systems, with documented procedures for quality assurance, material traceability, and compliance verification. Performance will be evaluated based on adherence to technical specifications, delivery timelines, and regulatory conformity.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-258S
The contract specifies the procurement of 52 units of HOSE, AIR DUCT with NSN 4720-01-386-4619 and part number 713874-101 from ARROWHEAD PRODUCTS CORP, priced at $52.00 per unit, totaling a contract value of $2,704.00. Delivery is required within 92 days from the contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a need ship date of November 4, 2025, and an original required delivery date of December 20, 2025. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-258S, issued under a federal procurement, with a response deadline of August 5, 2026, and the primary point of contact is Blake Tushar. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies per RQ011.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
CAB ASSEMBLY
Solicitation # SPE7L1-26-T-852V
The contract is for a single CAB ASSEMBLY with NSN 2510-01-575-0695, issued under solicitation SPE7L1-26-T-852V as a Total Small Business Set-Aside under NAICS code 332999. Delivery is required FOB Origin within five days of order placement to Fort Campbell, KY, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E, using CA corrugated wrap, AD air-filled cushioning, F7 unit container, and U packaging code, with all preservation performed using CLNG/DRY method 10 and no special preservation material. Marking must follow MIL-STD-129, including the special code ZZ indicating “Arrow Up” labeling and omission of nomenclature for sensitive items, with machine-readable barcodes required. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment and the DFARS clause 252.204-7012, requiring safeguarding of Covered Defense Information and cyber incident reporting. Hazard communication standards under 29 CFR 1910.1200 apply, requiring MSDS and hazard labels prior to award. The contractor must comply with DLA’s packaging requirements RP001 and eliminate government identification from non-accepted supplies. Payment is to be processed via WAWF, with accelerated payments to small business subcontractors required. The contract includes clauses on combating trafficking, employment eligibility verification, sustainable products, and prohibitions on covered defense telecommunications equipment. The contracting officer is Kristina Derry, with no designated COR specified. No contract value is stated due to missing unit price data, and no technical data is available from the government, requiring the supplier to provide necessary details for definitive packaging. The solicitation closed on August 5, 2026, and is structured as a fixed-price, non-commercial item requiring full compliance with all applicable FAR and DFARS provisions with multiple deviations effective February 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
Federal
LAVATORY UNITS
Solicitation # N0040626Q0446
The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting quotations for Lavatory Units under solicitation number N0040626Q0446, with a response deadline of August 12, 2026, and an anticipated award date in August 2026. All responsible sources are invited to submit proposals, and evaluations will be conducted based on technical factors including delivery date, price, and past performance, with no single factor prioritized over the others. The Government will determine offeror responsibility by assessing price reasonableness and past performance in accordance with RFO 12.203. Technical drawings, references, and technical guidance information are not included in the solicitation due to distribution restrictions; eligible quoters registered with the Joint Certification Program must request these materials directly using their CAGE code and DD Form 2345 from their data custodian. Interested parties must register for JCP through the DLA website to gain access. All correspondence must include the solicitation number in the subject line. The point of contact is Contracting Officer Sara Robinson at sara.e.robinson19.civ@us.navy.mil, and the procurement falls under NAICS code 332999 with no set-aside designation.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
Federal
Permanent Magnet Blocks
Solicitation # 481167
The contract solicits the supply of permanent magnet blocks designed specifically for use in hybrid dipole and quadrupole systems, with all technical specifications and requirements detailed in the attached Request for Quote and its enclosures. Bids must be submitted by the deadline of July 31, 2026, at 9:00 PM Eastern Time, following the combined solicitation process under solicitation number 481167, which was posted on July 16, 2026. The North American Industry Classification System code 332999 applies, indicating this is a miscellaneous manufacturing contract with no set-aside provisions for small or specialized businesses. The contracting activity is managed by Brookhaven National Laboratory, a U.S. Department of Energy contractor, located in Upton, New York, with performance also expected to occur at the same location. All inquiries and communications should be directed to Andrew Pascoe at apascoe@bnl.gov, who serves as the primary point of contact. Interested parties must access the official solicitation through the SAM.gov portal using the provided UI link to review full details, ensure compliance, and submit responses prior to the deadline.
Brookhaven National Labor -Doe Contractor

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
Federal
Fabrication of Door Subassemblies
Solicitation # W911N226QA063
The U.S. Army is seeking quotes for the fabrication of door subassemblies under a single-award indefinite delivery indefinite quantity (IDIQ) contract through a combined synopsis and solicitation issued as Request for Quotation W911N2-26-Q-A063. This procurement is entirely set aside for small business concerns and follows the simplified acquisition procedures outlined in FAR Part 12, with the solicitation serving as the only official request for offers and no separate written document to be issued. The work involves manufacturing components in strict accordance with provided drawings, with the contract slated for award on October 1, 2026. The acquisition is classified under the Product Service Code 5342 for hardware and weapon systems and the NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. Offers must be submitted by August 28, 2026, and all proposals must comply with provisions and clauses incorporated by reference, accessible via www.acquisition.gov. Performance will take place in Chambersburg, Pennsylvania, and all correspondence should be directed to the primary point of contact, Thomas C. Hall, or secondary contact Bobie J. Burkett, through the Department of Defense’s Lad Contract Office. Interested small businesses must respond through the designated SAM.gov portal, and no additional formal solicitation documents will be provided beyond this public announcement.
W6QK Lad Contr Office

POSTED

about 19 hours ago

DEADLINE

in 27 days
View Details
NAICS: 332999
New
Federal
Bridge Guard Rails
Solicitation # W911S226U3900
The contract entitled Bridge Guard Rails under solicitation number W911S226U3900 is a Small Business Set Aside opportunity issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is classified under NAICS code 332999 for other fabricated metal product manufacturing and is open exclusively to small businesses as a total set aside. The solicitation was posted on July 31, 2026, with a deadline for responses on August 7, 2026, and is categorized as a combined solicitation, meaning it may involve both acquisition and contract award actions in a single process. The place of performance is listed with a zip code of 74501, though no specific city or state is provided, suggesting delivery may be directed to a military or federal facility in that region. Primary point of contact for inquiries is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or phone at 9184206517, who serves as the primary responsible agent for this procurement. The contract is being managed through the SAM.gov platform, with the official solicitation accessible through the provided UI link. All interested small businesses must submit their proposals before the deadline to be considered for this non-severable requirement involving the supply and likely installation of bridge guard rails to enhance safety and infrastructure integrity for defense-related transportation assets.
W6QM Micc-Ft Drum

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
Federal
Aircraft Loading Ramps
Solicitation # W50S7Z26QA020
The solicitation seeks aircraft loading ramps adhering to specified requirements outlined in the attached documentation, with evaluations based solely on price for offers that fully comply with the terms of solicitation IAW 52.212-2. This is a Small Business Set Aside, total, under NAICS code 332999, reserved exclusively for small businesses. The contract action is issued by the Department of Defense through the W7NB Uspfo Activity Laang 159 office located in Belle Chasse, Louisiana, with performance expected at the same location. The solicitation was posted on July 31, 2026, and responses must be submitted no later than August 7, 2026, at 3:00 p.m. EDT. Primary point of contact for inquiries is Greggory Price, reachable via email or phone provided in the solicitation details. Bidders must access the official SAM.gov portal through the provided link to review full requirements and submit proposals.
W7NB Uspfo Activity Laang 159

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Rear Sights (Firearms Components)The contract requires the manufacture and delivery of 98 units of SIGHT, REAR with National Stock Number 1005016897899, designed to meet strict military specifications for the DLA Distribution New Cumberland facility. All units must be produced in full compliance with applicable defense standards to ensure compatibility, durability, and operational reliability in military firearms systems. The work is classified as a subcontract under the NAICS code 332999, indicating it involves other fabrication services not elsewhere classified, and the performance location is specifically tied to New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, giving potential contractors approximately two weeks to submit proposals. The contract is managed by the Department of Defense through its DDSP New Cumberland Facility, and while no set-aside provisions are specified, the requirement is explicitly for a defense-related component crucial to armament systems. Contractors must ensure all technical, quality, and delivery requirements are met to satisfy DLA’s logistics and supply chain obligations without deviation.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Hose Clamp Supply and DeliveryThe contract requires the supply and delivery of eleven units of hose clamps that meet NSN compliance standards, ensuring alignment with Department of Defense logistics requirements. All items must be packaged, labeled, and managed in strict accordance with DLA guidelines and federal supply chain protocols to guarantee interoperability and traceability throughout military supply systems. The place of performance is specified as Tracy, California, with the zip code 95304-5000, indicating where the delivered goods must be directed for receipt and validation. Issued under the NAICS code 332999 for other miscellaneous fabricated metal product manufacturing, this subcontract is part of the Fluid Handling Division’s procurement activities under the Department of Defense. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, leaving a fifteen-day window for potential vendors to submit proposals. While no set-aside category is defined, the contract is structured as a subcontract and must be fulfilled through adherence to all applicable federal logistics and quality assurance standards. The full solicitation details are accessible via the DIBBS portal at the provided link.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 334332
New
DIBBS
Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
DIBBS
Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Wire Rope and Cable Conduit SupplyThe contract specifies the supply of high-strength, naturally coiling wire rope and protective conduit engineered to endure a minimum tension of 552 lbs, ensuring durability and reliability under demanding operational conditions. All components must comply with MIL-STD-2073-1E packaging standards, guaranteeing secure, standardized handling, storage, and transportation throughout the supply chain. The work is classified as a subcontract under NAICS code 332420, indicating the manufacturing of wire and cable, and is issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, allowing interested parties sufficient time to prepare and submit proposals. Performance location and point of contact details are not specified, and the procurement is accessible via the DIBBS platform for further information and submissions.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334332
New
DIBBS
Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract calls for the full production of control cable assemblies designated as P/N 2600930-001, encompassing all manufacturing steps from wire rope coiling to the secure attachment of connectors, followed by rigorous tension testing at 552 pounds and final inspection. All work must strictly adhere to MIL-STD-1916 and ASQ H1331 quality standards, with an absolute requirement of zero non-conformance tolerance across the entire production batch. This is a subcontract within the Department of Defense procurement framework under NAICS code 335931, initiated by the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026, and the solicitation posted on July 31, 2026. Production and delivery must meet exacting military specifications to ensure reliability and performance under operational conditions.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
Small Business Subcontracting ParticipationCertified small businesses including WOSB, SDVOSB, and HUBZone concerns are invited to participate as subcontractors under a total small business set-aside prime contract managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. This opportunity is specifically aligned with NAICS code 336413, which pertains to aerospace product and parts manufacturing, and encompasses potential roles in manufacturing, testing, or logistics functions. The solicitation is structured to ensure full small business participation as mandated by the Small Business Administration under FAR 19.5, and interested entities must respond by the deadline of August 28, 2026. Opportunities are available to qualified small businesses supporting defense-related supply chain activities, with all work expected to be performed under the prime contract awarded to a certified small business concern. Participation is only open to entities that meet SBA certification requirements and can demonstrate capability in the specified technical areas.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
DIBBS
Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336413
New
DIBBS
Wing Panel Manufacturing and AssemblyThe contract titled Wing Panel Manufacturing and Assembly pertains to the production and delivery of PANEL, WING units under strict adherence to technical specifications, material certifications, and CAGE/part number requirements, ensuring full compliance with defense industry standards. It is structured as a subcontract and falls under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 336413 identifying it within the Aircraft and Aircraft Parts Manufacturing sector. The solicitation was posted on July 31, 2026, with responses due by August 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific location details for performance or contact information are not provided. All deliverables must meet rigorous quality and traceability criteria aligned with federal procurement protocols.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesA system error prevented the retrieval of subcontractor and supplier opportunities associated with the prime contract, making it impossible to break down actionable sub-opportunities. The solicitation, posted on July 31, 2026, with a response deadline of August 31, 2026, is categorized as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No solicitation number, NAICS code, set-aside details, organizational type, or physical address information is available, and the point of contact is undefined. The place of performance and other location data are also omitted, leaving critical details incomplete. The only identifiable reference is the online link to the DIBBS portal where the original posting exists, but without sufficient data to evaluate or pursue potential sub-contracting avenues.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details