This Government Contract opportunity was posted on February 13, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Swing Reach Truck

Awarded

FA8126-11-Q-0160Federal

Submission Closed02/13/2012, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

SLED

Two (2) 940 Rough Terrain Forklifts

Solicitation # WMATA-0000010949

The Washington Metropolitan Area Transit Authority is soliciting bids for the procurement of two 940 Rough Terrain Forklifts. This solicitation, identified by number WMATA-0000010949, falls under NAICS code 333924 and is managed through the agency's Virginia operations. The solicitation was posted on October 31, 2026, and requires all responses to be submitted by the deadline of November 9, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Solicitation # W911S227U0014

Solicitation W911S227U0014 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of one new Core IC Pneumatic Forklift. The requirement specifies a Toyota brand name, part number 50-8FGU20, or an approved equal. To be considered, equal products must meet all salient characteristics, including pneumatic tires, a tilt range of 6 forward and 11 backward, a neutral start safety switch, an anti-restart ignition key switch, self-adjusting brakes, and a fully sealed air intake system. This acquisition is a Total Small Business Set-Aside under NAICS code 333924. The contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. destination, with a preferred timeframe of within 30 days. All quotes must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation module. Critical submission requirements include the completion of Attachment 1 regarding certifications and country of origin, as failure to provide this or submitting via methods other than PIEE will result in the offer being rejected as nonresponsive. Payment will be processed electronically via Wide Area Workflow.

POSTED

DEADLINE

35K lb. Base Capacity 4-wheel Sit-Down AC Electric Lift Truck, including Options, Battery, Charger, and Freight

Solicitation # W911S227U0101

Solicitation W911S227U0101 is a total small business set-aside for the procurement of one new, heavy-capacity, four-wheel sit-down AC electric lift truck with a base capacity of 35,000 pounds. The equipment must be current production and is intended for indoor industrial material-handling operations at the McAlester Army Ammunition Plant in Oklahoma. Key technical requirements include a rated lifting capacity of at least 28,700 pounds at a 24-inch load center, a maximum fork height of 103.5 inches, and a 72-volt electrical system or better. The forklift must be delivered fully assembled and include a compatible battery, charger, and all necessary accessories. The contract is awarded on a fixed-price basis to the responsible offeror whose proposal is most advantageous to the government, evaluating both price and technical compliance. Delivery is required on an FOB Destination basis no later than September 30, 2027, with a preferred delivery window of 30 days. The award includes a minimum 12-month or 2,000-hour general warranty and a 36-month or 6,000-hour powertrain warranty. The successful contractor must also provide on-site operator orientation and furnish comprehensive electronic and hard-copy manuals. All quotes must be submitted via the PIEE Solicitation module and include a completed certification of country of origin.

POSTED

DEADLINE

NEW - Replace 1998 Hyster Forklift (CPN)

Bureau of Reclamation

POSTED

DEADLINE

SSB TFCF Lathe Equipment (CGB)

Bureau of Reclamation

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1755

Solicitation SPE4A7-27-T-1755 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Div for one large track, identified by NSN 1450-00-089-4364. The requirement is not a small business set-aside and is being processed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is August 4, 2026, with the place of performance located at Camp Pendleton, California. Inspection and acceptance will occur at the origin in accordance with FAR 52.246-2 and specific quality standards, including ISO 9001:2015 and zero-based sampling plans. The contract contains strict technical and security requirements, including export controls under ITAR and EAR regulations, which limit technical data distribution to approved contractors with US/Canada Joint Certification Program certification. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Additionally, the offeror must comply with the Buy American Act, the Berry Amendment, and cybersecurity standards including NIST SP 800-171 and CMMC Level 2. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0234

Solicitation SPE8EF-27-T-0234 is a small business set-aside procurement by the Defense Logistics Agency for 24 kits of hand trucks, identified by NSN 3920016298728. The contract is issued under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery is 153 days after receipt of the order, with an original required delivery date of February 14, 2027, and a need ship date of April 12, 2027. The place of performance and delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and prohibitions on covered defense telecommunications equipment. Technical and quality requirements are dictated by the DLA Master List, and packaging must comply with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination. Quotations must be submitted via the DIBBS portal by November 9, 2026. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Bobcat LP Forklift – 4,000 lb. Capacity

Solicitation # 27841

The Chickasaw Nation is seeking bids for a Bobcat LP-powered forklift with a 4,000-pound lifting capacity under solicitation number 27841. Interested vendors must provide pricing for equipment that adheres to the specified requirements to be considered for the contract. All bids are due by November 3, 2026. For further information or to address specific concerns regarding this solicitation, vendors should contact Matthew Thompson via email.

POSTED

DEADLINE

Next Generation Bomb Hoist

Solicitation # N6833526R1012

Solicitation N6833526R1012 is a request for proposal issued by the NAVAIR Warfare Center Aircraft Division for a new Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of 4 Pilot Production Units (PPUs) and up to 940 full rate production units distributed over a five-year period, along with associated technical data and reports. This procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. The government will award the contract based on best value, utilizing a trade-off process where technical capability and past performance are significantly more important than price. Key technical requirements include compliance with ANSI/ISO/ASQ Q9001-2008 quality standards, specific welding certifications, and the ability to manufacture Critical Safety Items such as the Cable Assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 16, 2026, at 4:00 PM EST. Pricing for production units is structured using a step-ladder model across five quantity tiers.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Motorized Hand Truck FY27

Solicitation # B2728307

Solicitation B2728307 is a micro-purchase agreement issued by the City of Philadelphia Water Department for the procurement of motorized hand trucks. The contract is awarded to the lowest, responsible, and responsive seller, with a maximum order value of 45,000 dollars, which is subject to annual adjustments based on the CPI-U from January 1, 2020. The contract term is 365 days from the effective date. All products must be delivered FOB Destination Point, and the City reserves the right to accept alternate products provided they are equal in quality and performance and accompanied by a full description. Payment is processed exclusively via electronic deposits, and the awarded entity must enroll through the City's vendor portal. Insurance requirements include general liability coverage of 500,000 dollars per occurrence and automobile liability of 300,000 dollars per occurrence, though those using common carriers for delivery only require general liability. Sellers must comply with all local, state, and federal laws, including specific ethics guidelines regarding gifts and conflicts of interest. All quotes and required documentation, including the mandatory Consent and Authorization Agreement, must be submitted electronically through the PHLContracts portal by the specified deadline.

POSTED

DEADLINE

Pump Assembly Manufacturing & IntegrationThis subcontract involves the manufacture and assembly of four complete Pump Assembly Trailer units for prime contractors supporting Department of Defense supply contracts. The scope of work includes integrating mechanical pump components with a trailer chassis and conducting final quality testing to ensure full compliance with the technical specifications for NSN 1730-01-216-8023. The project is designated as a Total Small Business Set-Aside under NAICS code 333924 and will be performed in Cherry Point. Interested parties must respond by November 9, 2026, to provide industrial pump systems and mounting hardware necessary for the completion of these units.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Material Handling Roller SupplyThis subcontract involves the manufacture or procurement of one specialized material handling roller, identified by NSN 3990-20-010-8500, to support prime contractors fulfilling DLA Troop Support supply contracts. The contractor must ensure the product complies with the DLA Master List of Technical and Quality Requirements RA001 and strictly adheres to MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA RP001 for palletization to facilitate overseas military shipment. Managed by the Department of Defense under NAICS code 333924, the contract requires the delivery of a single, fully packaged and marked roller to a performance location in FPO 09588. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 9 days

General Info

Agency

N/A

Contract Value

$131,895

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

Tinker Air Base, Tinker Air Force Base, OK, 73145, USA

Set-Aside

NONE

Awardee

SOONER LIFT INC

Award Issued Date

02/09/2012, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates

PhaseAwarded

PostedSep 20

Presolicitation

Notice updatedSep 21

The notice description changed.

Notice updatedSep 22

Response deadline changed from Sep 23, 2011 to Sep 26, 2011. The notice description changed.

Type ChangedOct 3

Presolicitation → Solicitation

AwardedFeb 9

Contract was awarded

Submission Closed

02/13/2012, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Thomas L. LongContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

1) Raymond Rail-Guided Swing-Reach Man-up Turret Turcks Item number: 9600- CSR 30T or equal. 2) Double Roller Guidance w/ Auto Centering 3) Manuals: Parts/Maintenance/Operator's - Paper only 4) Required Installation 5) Required operator training class (S.O.M.) with all materials-12 Trainees- 6) #24-125-15 Lead Acid type battery, 875-Ah 7) Single Point Watering System Installed on Battery 8) #FLX200-24965-T1H, 3 PH 208/480-v Vehicle description and standards: Mast: 103" lowered height, 226" fork lift height Capacity/Load Center: 3000-Ibs at 24" load center to 226" (no de-rating) Standard Voltage: 48-Volt