Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SWITCH, PRESSURE

Active
SPE7M8-26-T-5561Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a pressure switch specified by DLA under NSN 5930-01-270-6139 and part number 1950-5-2F from Dwyer Instruments Inc, with a total quantity of 12 units. Delivery is required within 168 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The product must comply with MIL-STD-2073-1E for packaging and MIL-DTL-28786 for preservation, with marking following MIL-STD-129 and no special marking required. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Strict prohibitions are in place against intentional use of mercury or mercury compounds in the product except for specific exemptions such as batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The contract enforces compliance with DLA’s Master List of Technical and Quality Requirements referenced electronically, with applicable revisions determined by the solicitation or award date depending on acquisition size. Delivery is to be made to the DLA Distribution San Joaquin warehouse in Tracy, CA, with adherence to hazardous materials shipping protocols as outlined in DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M8-26-T-5561, with a response deadline of August 3, 2026, and a required ship date of January 19, 2027.

General Info

DLA procures 12 pressure switches from Dwyer, FOB origin, due Jan 19, 2027, compliant with MIL standards, no mercury except exempted uses.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7M8-26-T-5561.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PRESSURE
SWITCH,PRESSURE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
DWYER INSTRUMENTS INC 85274 P/N 1950-5
DWYER INSTRUMENTS INC 85274 P/N 1950-5-2F
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M8-26-T-5561
SECTION B
PR: 7017603232 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017603232 0001 EA 12.000
NSN/MATERIAL:5930012706139
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-28786, FOR SWITCHES.
..
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/19/2027 Original Required Delivery Date:11/24/2026
SPE7M8-26-T-5561
SECTION B
PR: 7017603232 PRLI: 0001 CONT’D
SPE7M8-26-T-5561 NSN/Part Number: 5930-01-270-6139 Quantity: 12 EA Purchase Request: 7017603232QTY: 12 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
BOLT, MACHINEThe item is a machine bolt with NSN 5306-01-459-4621, quantity one, under purchase request 7014266912, with a delivery requirement of 20 days after order award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to receive or handle the information. The solicitation number is SPE4A6-26-T-09JC, posted on July 23, 2026, with responses due by July 31, 2026. The contract is issued by the ASC Commodities Division, Department of Defense, under NAICS code 332112, with performance location at FPO, ZIP 96678. Primary point of contact is Monica Clark, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECThis contract specifies the procurement of a electrical plug connector with the NSN 5935-00-817-9096 and a quantity of 1,412 units, issued under solicitation SPE7M5-26-T-342L as a total small business set-aside. The item is designated as a critical application component and must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless prior written approval is obtained from the contracting officer, and this prohibition overrides any conflicting specification but does not reduce performance expectations. The connector must be supplied by one of the approved vendors listed: Raytheon Company, Amphenol Corp, or The Boeing Company, each using their respective part numbers. The delivery is scheduled to occur within 168 days from contract award, with FOB origin terms and inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, using Method 41 drying, FA wrap material, and unit containers as specified, with all marking following MIL-STD-129 and no special marking required. The delivered goods must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, though the original delivery target was December 18, 2026. Zero quantity variance is permitted, and all transportation logistics must follow DLA Procurement Notes C19 and C20. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense’s Active Devices Division under NAICS code 332112.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SWITCH, PRESSUREThis contract is for the procurement of a pressure switch, identified by NSN 5930-01-159-0119 and part number 171D8WCS, sourced from approved vendors Henry G Dietz Co Inc and World Magnetics Company LLC. It is classified as a commercial off-the-shelf item and designated as a critical application item. The contract requires strict compliance with DLA packaging standards including MIL-STD-2073-1E and ASTM-D3951 for commercial packaging, with preservation, marking, and shipping following MIL-STD-129 and specific DLA requirements. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for approved functional uses such as batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, which must include a secondary containment and meet NAVSEA 5100-003D specifications. The item must be delivered FOB origin within 81 days with no quantity variance allowed and inspected and accepted at the destination. The contract is set aside entirely for small businesses under FAR 19.5, with a total quantity of 227 units at a unit price of $227.00, totaling $51,529.00, though this quantity is estimated and subject to change by the IDC. Packaging must be palletized per DLA guidelines and marked with special requirements code ZZ-ZZ. The solicitation number is SPE7M1-26-U-4836, issued under the Department of Defense Maritime Supply Chain, with a response deadline of August 7, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
SWITCH, STEPPINGThe contract pertains to the procurement of 35 units of a SWITCH, STEPPING with NSN 5930-01-497-5596 under solicitation SPE7M8-26-T-5560, issued as a Women-Owned Small Business Set-Aside with NAICS code 332112. The delivery deadline is set for 81 days after award, and the solicitation was posted on July 23, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The alternate offeror must submit a complete data package encompassing both the approved and alternate parts. The place of performance is in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the primary point of contact is Dondiego Boler of the Electrical Devices Division, U.S. Department of Defense. Government identification must be removed from non-accepted supplies per contractual obligations, and the procurement falls under simplified acquisition procedures as defined by DLA directives.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract pertains to the procurement of BOLT, MACHINE with part number 12414307-051 and NSN 5306013825051, requiring five units to be delivered within 20 days FOB origin. Compliance with technical and quality standards is mandated through incorporation of the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stated. Attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization governed by DLA packaging standards. Item Unique Identification is not mandated per DFARS 252.211-7003(c)(1)(i) as requested by the Service customer. The Certificate of Conformance procedure is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. Delivery is to be made to W8030B, 1700 Army Road, MARSEILLES IL 61341-9750, with shipment required via traceable means excluding parcel post. The contract is issued under solicitation SPE4A6-26-T-09FN with a required delivery date of July 17, 2026, and the purchasing request number is 7017559837. Unit price is $5.00 per unit, totaling $25.00, with zero variance permitted in quantity. Technical data package requirements reference revision G of drawing 19207 12414307 dated January 28, 2026, and revision D of 19207 12414307-051 dated February 23, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle under NSN 5935-01-274-5177, with a quantity of 150 units to be delivered FOB origin within 168 days, with no variance allowed in quantity. The item must comply with MIL-DTL-38999N and MIL-DTL-38999/40B specifications, and all manufacturing must adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The connector must be a qualified item per the Qualified Products List for FSC 5935, and materials manufactured by Bendix, Amphenol, or Pyle National between specific date ranges are prohibited due to obsolescence or compliance concerns. Use of ozone-depleting substances is strictly forbidden unless written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are prohibited except in narrowly defined functional applications. Traceability documentation may be required to verify manufacturing dates and sources. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or an approved zero-defect plan with stringent acceptance criteria. The contract requires full and open competition, with delivery directed to a specific DLA warehouse in Tracy, California. The unit of issue is each, with a total contract value determined by the unit price, and the solicitation closed for responses by August 3, 2026.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SWITCH ASSEMBLYThe contract pertains to the procurement of a switch assembly identified by NSN 5930014468816 and part number VC-056UH090H, with a quantity of 28 units to be delivered FOB origin within 331 days from the contract award, targeting a ship date of June 20, 2027. The unit price is $28.00 per unit, resulting in a total contract value of $784.00, with no tolerance for variance in quantity. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 41, dry preservation, and preservation material code 00, with unit containers designated as D3 and intermediate containers as DO. Marking must adhere strictly to MIL-STD-129, with no special marking required. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, designated by the parcel post address W25G1U W1A8, and transportation is governed by DLA procedural notes C19 and C20. All technical and quality requirements are referenced through the DLA Master List of Technical and Quality Requirements, and the contract falls under a simplified acquisition with the revision of the Master in effect on the solicitation issue date controlling. The solicitation number is SPE7M8-26-T-5370, issued by the Department of Defense’s Electrical Devices Division, with a response deadline of July 28, 2026, and inspection and acceptance to occur at the destination.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
INSERT, ELECTRICAL CONNThis contract specifies the procurement of an electrical connector plug identified by NSN 5935010466909 and part number M28748/8-D00S1A, meeting the technical requirements of MIL-DTL-28748/8F and MIL-DTL-28748E. The item is classified as a commercial item and is included on the Qualified Products List, requiring compliance with procurement note H01 for connector assemblies and contacts. Strict packaging standards are mandated under DLA’s Master List of Technical and Quality Requirements, overriding ASTM D3951, with packaging must conform to MIL-STD-129 and RP001, and hazardous materials must follow FED-STD-313 and TQ requirement IP025. The use of ozone-depleting substances is prohibited in all manufacturing and handling processes unless explicitly approved by the contracting officer. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract requires delivery of 56 units FOB origin within 168 days to Robins Air Force Base, Georgia, with no variance allowed in quantity. The delivery must occur by January 19, 2027, and inspection and acceptance occur at destination. The unit of issue is each (EA) at a fixed price of $56.00 per unit. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and all labeling and marking must comply with government packaging and identification directives.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of a plug electrical connector, identified by part number 10-042622-23S and NSN 5935006143959, manufactured by AMPHENOL CORP, with technical compliance required to reference drawings NR 18876 8526701 Revision 1 dated 07/31/1959 and NR 18876 8168554 Revision C dated 05/01/1958. The item is designated as a critical application product, and only the exact product supplied by the specified manufacturer is acceptable; any substitution is considered unauthorized. The contract strictly prohibits the use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning unless written approval from the contracting officer is obtained, with exceptions only for commercial items as defined under FAR 11.001 or part-numbered-only items. Technical data referenced is incomplete, but the delivered item must fully meet all requirements of the cited drawings and part number. The shipment of 66 units is to be delivered FOB origin within 93 days, with no variance allowed in quantity, and inspection and acceptance occur at destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging standards. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation details follow DLAD procedural notes. The solicitation was issued under contract number SPE7M5-26-T-342D, with a response deadline of August 3, 2026, and the required ship date is July 15, 2026.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEADThe contract specifies the procurement of seven hexagon head cap screws identified by NSN 5305-01-342-5584 with a delivery requirement of five days after award. The solicitation number is SPE4A0-26-T-4031, issued by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with Danita Davis listed as the primary point of contact. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R-numbers including RQ017 for physical identification and bare item marking, RQ011 for removal of government identification from non-accepted supplies, and RA001 which incorporates all technical and quality standards stipulated in the DLA Master List. Packaging must adhere to DLA Packaging Requirements for Procurement, RP001. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unspecified attributes are considered major. Verification levels are assigned as VII for critical, IV for major, and II for minor attributes, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract dictates otherwise. The place of performance is Eau Claire, Wisconsin with a ZIP code of 54701-4798, and the solicitation opens on July 23, 2026, with responses due by July 31, 2026. The NAICS code is 332112, indicating classification within the Screw, Nut, and Bolt Manufacturing industry.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, FThis contract specifies the procurement of a fiber optic connector and receptacle with NSN 6060-01-422-9749, quantity of five units, under solicitation SPE7M1-26-T-228X. The item is designated as a critical application and is subject to strict technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with compliance governed by MIL-PRF-28876F Rev F dated November 9, 2023, and part number M28876/2B12S1. The product must be sourced from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, or specialized instruments, and any exempted items must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking must conform to MIL-STD-129 with no special marking required. Palletization follows DLA packaging guidelines, and delivery is FOB origin with a strict 168-day delivery window ending on January 19, 2027. The inspection and acceptance points are at the destination facility located in Tracy, California, with zero variance permitted in quantity. Transportation and shipping logistics are governed by DLA procedural notes C19 and C20, and the unit of issue is each (EA). The contract is managed by the Department of Defense’s Maritime Supply Chain through the DLA, with Michael Reese designated as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRESThis contract specifies the procurement of 105 helical compression springs under NSN 5360-00-576-2823 and part numbers 111421, 234804, and 281456-0001 from Marotta Controls Inc, designated as critical application items. The springs must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs specifications for materials and manufacturing. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in direct contact with the components, except for specific exempted uses such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is required FOB origin within 120 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E, with unit packaging coded as D3, and labeling must follow MIL-STD-129 without special markings. The item is to be delivered to Industries of the Blind Inc in Greensboro, North Carolina, with a need ship date of December 2, 2026, and an original required delivery date of January 3, 2027. Transportation logistics are governed by DLAD Procurement Notes C19 and C20, and the solicitation number is SPE7M4-26-T-277A, with a response deadline of August 3, 2026, and the contracting office is the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 334419
New
DIBBS
SWITCH, ROTARYThe contract solicits 50 rotary switches with NSN 5930-12-129-3370 under solicitation number SPE7M8-26-T-5578, with a delivery requirement of 168 days after order. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The alternate offeror must submit a complete data package containing full documentation for both the primary and alternate parts. The contract is issued by the Electrical Devices Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. Any supplies not accepted by the government must have all government identification removed prior to return. Primary point of contact is Dondiego Boler, reachable via email and phone provided.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSUREThis contract pertains to the procurement of a single pressure switch, identified by NSN 5930014622771 and part number 15824 from HYDRA-ELECTRIC COMPANY, with a delivery requirement of one unit. The item is designated as a critical application component and must be delivered FOB origin within 274 days, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and strict packaging standards are mandated under MIL-STD-2073-1E and MIL-DTL-28786C, with marking conforming to MIL-STD-129P and including the special code 05 for delicate instrument. Packaging must also adhere to DLA’s overarching packaging requirements and hazardous materials protocols under IP025. The delivery address is specified as DLA Distribution San Diego, with the original required delivery date set for November 12, 2026, and a need ship date of May 5, 2027. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is governed by tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE7M8-26-T-5570, issued on July 23, 2026, with responses due by August 3, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe contract pertains to the procurement of a PUSH SWITCH with NSN 5930-01-290-7749, quantity of three units, to be delivered within 20 days FOB destination under solicitation SPE7M8-26-T-5587. All supplies must comply with DLA packaging requirements as defined in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The switch must be free of intentional mercury or mercury-containing compounds except for specific exempted applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury require shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking compliant to MIL-STD-129 and no special marking code applied. The item is to be shipped via traceable means only—parcel post is prohibited—with delivery directed to USNS JOSHUA HUMPHREYS, FPO AE 09573, using the provided freight shipping address and vendor identification code. The required delivery date is February 6, 2025, and the unit of issue is each, with zero tolerance for quantity variance. The contract is governed under the DoD procurement framework and all requirements are binding unless superseded by official amendment.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
HARNESS ASSEMBLY, SIThis contract specifies the procurement of a harness assembly designated as SI with NSN 5999-01-577-3815 and part numbers 5151041-005 for Raytheon Company and ABC56537-005 for Glenair Inc. Two units are required at a unit price of $2.00, with a total contract value of $4.00, and delivery must be made FOB origin within 94 days of the required delivery date of July 1, 2026, with an actual ship date no later than March 24, 2026. The item is classified as a critical application item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking, and palletization must adhere to DLA packaging requirements. The harness assembly must be delivered to the specified DLA distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and all supplies must be marked in accordance with physical identification standards. Removal of government identification from non-accepted supplies is required, and hazardous materials handling, if applicable, must meet IP025 standards. The DLA unit of issue is in each, and all transportation logistics are governed by DLAD procedural notes C19 and C20.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, THERMOSTATICThe contract pertains to the procurement of a thermostatic switch identified by NSN 5930017158026 and part number AT0E-3880-2 from Accutemp Products Inc, with a total quantity of 12 units. Delivery is required within 168 days from the contract award, with shipment originating FOB origin and final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods and marking per MIL-STD-129, with no special marking required. Transportation and freight instructions are governed by DLA procedural notes C19 and C20. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any aspect of the product or its production, overriding any conflicting specification requirements, and mandates prior approval for any substitute chemicals. Quality and technical standards referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The purchase request number is 7017603431, with a unit price of $12.00 and no variance allowed in quantity. The required delivery date is November 16, 2026, with a needed ship date of January 19, 2027, under solicitation SPE7M8-26-T-5577, classified under NAICS code 335313. All deliverables must be inspected and accepted at the destination point, and compliance with DLA packaging and marking regulations is mandatory.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336415
New
DIBBS
GUIDE, CONNECTOR, UMBThe contract pertains to the procurement of a GUIDE, CONNECTOR, UMB with NSN 1440-01-084-4956 and part number 3103774-1-1, issued under solicitation SPE7M8-26-T-5597. Four units are required at a unit price of $4.00, totaling $16.00, with delivery required within 133 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s packaging requirements, and all technical and quality standards referenced by R or I numbers from the DLA Master List take precedence. The item must be delivered to the specified federal facility with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contractor is subject to DLA’s procurement rules including the requirement for Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to the removal of government identification from non-accepted supplies. The solicitation applies to simplified acquisition procedures, and the controlling version of the DLA Master List is determined by the solicitation issue date. The delivery timeline references an original required delivery date of July 17, 2025, with a need ship date of April 8, 2025. The point of contact for the requirement is Rickie Allen of the Electrical Devices Division, U.S. Department of Defense, and the contract is governed under NAICS code 336415, with full transportation and shipping instructions tied to DLA procedural notes C19 and C20. Approved sources include Marvin Engineering Co., Inc. and Raytheon Company.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe contract specifies the procurement of 22 push switches identified by the NSN 5930-01-062-4919 under solicitation SPE7M8-26-Q-0204, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 400 days after award, with both inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and MIL-DTL-28786, with marking compliant to MIL-STD-129 and no special markings required. The product must exclude intentional addition of mercury or mercury compounds except in designated exceptions such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents authorized by NAVSEA, and any portable devices containing mercury must have shock-proof construction with a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly prohibited, and any required substitutes must be approved unless explicitly permitted by the specification. The item is designated as a critical application component with multiple referenced technical data packages tied to specific drawing revisions. All supplies must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLAD Proc Note C19 for transportation and C20 for first destination handling. The contract is a total small business set-aside with a NAICS code of 334419, and the point of contact is Jamir Prattis at the Department of Defense’s Electrical Devices Division.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOWThis contract specifies the procurement of a flow switch with NSN 5930-01-194-8584, under solicitation SPE7M8-26-T-5579, requiring delivery within 80 days FOB origin with no variance in quantity. The item is designated a critical application item and must comply with detailed technical documentation including TDP Rev A Gen 1 referencing drawing numbers 18876 and part number 11437885-108, with revision dates up to October 29, 2025. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to ANSI/ISO/ASQ 9001:2015 and AS9100 as tailored for operational processes. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-129 and DLA-specific standards, with hazardous materials following FED-STD-313 and non-hazardous items meeting ASTM D3951, unless overridden by DLA requirements. Inspection and acceptance occur at origin, and the contractor must provide production lot testing in accordance with Procurement Note E04. A separate line item exists solely to fulfill the production lot test requirement. The contract mandates full and open competition, prohibits surplus supplies, and enforces configuration control through engineering change proposals and variance requests. The government point of contact is Dondiego Boler, and delivery is directed to the U.S. Army SSA facility in Zaczernie, Poland, with all packaging and marking subject to precise DLA specifications.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOWThis contract specifies the procurement of five flow switches identified by NSN 5930-01-570-4515 and part number 225527 from SETRA SYSTEMS, INC., with a total value of $25.00 at $5.00 per unit. Delivery is required within 168 days from contract award, delivered FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit containment codes. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging requirements. The item is subject to strict restrictions on mercury and mercury-containing compounds, barring intentional addition or direct contact unless explicitly exempted for functional components like batteries, lamps, or authorized instrumentation, with additional containment requirements for portable mercury devices per NAVSEA 5100-003D. Shipment must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures are governed by DLAD Proc Notes C19 and C20. The original required delivery date was November 29, 2026, with a need ship date of January 19, 2027, under solicitation SPE7M8-26-T-5575, which was posted July 23, 2026, with a response deadline of August 3, 2026. The contract falls under NAICS code 335314 and is managed by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the primary point of contact.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335932
New
DIBBS
SWITCH BOXThe contract pertains to the procurement of five SWITCH BOX units identified by NSN 5930-01-582-9676 under Purchase Request 7017602963, with a delivery requirement of 168 days after award. The solicitation number is SPE7M8-26-T-5588, issued on July 23, 2026, with responses due by August 3, 2026. The procurement falls under NAICS code 335932 and is managed by the Electrical Devices Division of the Department of Defense, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The primary point of contact is Dondiego Boler, reachable via email and phone provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation issuance or award date depending on the acquisition size. For simplified acquisitions, the version in effect on the solicitation issue date or award date applies, while for larger acquisitions, the RFP issue date controls unless an amendment updates the requirements. Alternate offerors must submit a complete data package covering both the approved and alternate parts, and no government identification may be removed from supplies that are not accepted.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLEThis contract pertains to the procurement of a switch and toggle component identified by NSN 5930-01-172-4091 and part numbers 26ET31-2-G and 5M1031-6, with a total quantity of 40 units to be delivered FOB origin. The contract mandates strict adherence to DLA Packaging Requirements, specifying that non-hazardous materials must comply with ASTM D3951 while hazardous materials must follow Fed-Std-313 and TQ requirement IP025, with all packaging and labeling conforming to MIL-STD-129. Packaging must be palletized per RP001, and the unit of issue is EA with a zero variance in quantity. Inspection and acceptance occur at the destination, with delivery required within 176 days of the contract award, originally due by June 13, 2027, though the needed ship date is listed as July 23, 2026. Quality assurance sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at specific levels or AQLs. Any deviations require formal engineering change proposals or variance requests, and all technical and quality requirements referenced in the DLA Master List supersede other standards. The solicitation is a total small business set-aside under NAICS code 334419, issued by the Department of Defense’s Electrical Devices Division through DLA, with a response deadline of August 3, 2026, and a posted date of July 23, 2026. The unit price is $40.00 per unit, totaling $1,600.00, and delivery must be made to the specified DLA Distribution Center at Robins AFB, Georgia. Transportation logistics, including first destination and freight shipping, are governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements as the authoritative source for all specifications, and compliance with DLA’s standardized data requirements for unit of issue is enforced. The point of contact for this procurement is Dondiego Boler, and the solicitation can be accessed via DIBBS using the provided link.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, PRESSUREThis contract specifies the procurement of a pressure switch identified by NSN 5930012766281, with a quantity of 10 units to be delivered FOB origin within 178 days of contract award, with a required delivery date of February 28, 2027. The item must comply with military specification MIL-DTL-9395/41F and associated technical requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards such as ASTM D3951. Packaging must adhere to DLA’s RP001 guidelines, MIL-STD-129 labeling, and, if hazardous per FED-STD-313, TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 applies, subject to DLA’s overriding requirements. All components must be sourced exclusively from qualified suppliers listed on the applicable QPL or QML, as this NSN is designated as a primary qualified product. The contract prohibits the use of any Class I ozone-depleting substances in manufacturing or testing unless granted written approval by the contracting officer, and this restriction supersedes any conflicting specification language without compromising performance standards. Cybersecurity compliance at CMMC Level 2 is required, with the offeror responsible for self-assessment. The delivery destination is DLA Distribution Jacksonville, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract number is SPE7M8-26-T-5542, solicited on July 23, 2026, with responses due by August 3, 2026, under NAICS code 335313 for electrical device manufacturing.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details