Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH, PUSH

Active
SPE7M8-26-T-5911Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 17 Push Switches with NSN 5930-01-537-4120 under solicitation SPE7M8-26-T-5911, issued by the Department of Defense’s Electrical Devices Division. The delivery deadline is set for 413 days after award, with responses due by August 20, 2026. The item is subject to stringent cybersecurity compliance, requiring the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization, indicating the need for robust cybersecurity practices aligned with Department of Defense standards. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training, and have received formal approval from DLA. Additionally, packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is identified as New Cumberland, PA, with primary point of contact Dondiego Boler reachable via email and phone.

General Info

Procure 17 push switches, CMMC Level 2 certified, ITAR/EAR controlled, delivery in 413 days, New Cumberland, PA.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M8-26-T-5911 for Electrical Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PUSH
SWITCH, PUSH
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5930-01-537-4120 Quantity: 17 EA Purchase Request: 7017778071QTY: 17 Delivery: 413 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
HOUSING, ELECTRONIC COM
Solicitation # SPE7M0-26-T-034M
This contract, issued under solicitation number SPE7M0-26-T-034M by the Department of Defense through the Maritime Supply Chain ESOC Buys office, requires the delivery of 10 units of electronic component housings identified by NSN 5999-01-619-4168 and part number BNG-410-01 from L3 Technologies, Inc. Delivery must be completed within 10 days of award, shipped FOB origin, and received at Fort Bragg, North Carolina, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation, wrapping, and marking requirements with no special marking codes applied. The packaging and shipment must also comply with DLA’s overarching packaging requirements and hazardous materials protocols when applicable, and parcel post is explicitly prohibited — all shipments must use fast, traceable methods. The contractor must ensure compliance with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and may not use any Class I ozone-depleting substances in manufacturing or processing unless formal written approval is obtained from the Contracting Officer — this restriction does not extend to commercial items or part-numbered-only items. Any substitution of the approved part number, whether through administrative change or superseding item, requires official documentation from the original manufacturer and prior approval from the Product Specialist or Authorizing Engineering Support Activity to be considered for award; otherwise, the offer will be deferred to future solicitations. Delivery is tied to an original required date of August 5, 2026, with government-specific identifiers and tracking information including RDD E, project TP 2, and the contract data interface code A0A, all governed by the DLA electronic procurement system and applicable FAR and military standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-398Y
This contract specifies the procurement of a linear microcircuit under Federal Supply Class 5962, with the part number 5962011671655 and a quantity of four units, to be delivered within 151 days from the contract award date. The item must conform to strict technical and quality requirements referenced through the DLA Master List, including mandatory supply chain traceability documentation per Procurement Note C03, and adherence to the DLA Land and Maritime Form 918, which must be submitted electronically at least 15 days before delivery and approved in writing prior to shipment. Failure to comply with traceability, documentation, or shipping authorization protocols may result in non-final payment. Each unit must be marked per IPC/JEDEC J-STD-609 to identify lead content and packaged with ESD/EMI protective materials meeting MIL-PRF-81705 specifications, using qualified barrier materials from the QPL-81705 list, with appropriate cushioning to prevent damage to leads. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special marking codes and preservation methods applied. The product must be free of intentional mercury contamination, except in specified exceptions, and must originate from an approved source as defined by the contract's modified definition of “exact product.” The item is designated as critical and requires cybersecurity compliance at CMMC Level 2, and delivery is FOB origin to the DLA distribution center in Columbus, Ohio, with no tolerance for surplus or nonconforming material.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FIXTURE, ENGINE MAIN
Solicitation # SPE4A5-26-T-337N
This solicitation, SPE4A5-26-T-337N, is a total small business set-aside for a fixture, engine main, with a quantity of four units and a delivery requirement of 166 days after contract award. Offerors must submit quotation ranges due to fluctuating demand and frequent quantity adjustments on open purchase requests, as this allows the buyer to consolidate or reduce orders without administrative delays or resolicitation. Fast Pay is not applicable, and quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-procurability. All offerors must certify they will not supply covered telecommunications equipment or services restricted under FAR 52.204-24 and DFARS 252.204-7016. Domestic sourcing restrictions under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit required representations for eligibility under specific categories including service-disabled veteran-owned, women-owned, and economically disadvantaged women-owned small businesses. Vendors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their internal schema. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any proposed AM-produced items will be disqualified from evaluation or award. The solicitation is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Steven Lewis as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PANEL, INTERFACE DEV
Solicitation # SPE4A5-26-T-336K
This contract pertains to the procurement of a PANEL, INTERFACE DEV, identified by NSN 4920-01-659-7555 and part number 8M0086566, with a quantity of five units to be delivered under solicitation SPE4A5-26-T-336K. The item is classified as a commercial off-the-shelf (COTS) product and must comply with DLA’s packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandatory unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Delivery is to be made via the fastest traceable means, excluding parcel post, to the specified freight address in Baltimore, MD, under a fixed price of $5.00 per unit totaling $25.00. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Physical identification and bare item marking are required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The original required delivery date is August 3, 2026, and the contract is subject to strict zero variance in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
HEAT SINK-INSULATOR
Solicitation # SPE7M5-26-T-399S
The contract is for a single unit of a heat sink-insulator identified by NSN 5999-33-208-8134 and referenced under multiple part numbers including P/N 90100001769-00A, N1790, and SALWICO ISOLATOR-A, supplied by authorized vendors such as CONSILIUM MARINE & SAFETY AB and L3 MAPPS LTD. The item is designated as a critical application component and must comply with the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is required within 20 days from the contract date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking governed by MIL-STD-129 and no special markings required. The item must be shipped via traceable freight, not parcel post, to the designated naval warehouse in Norfolk, Virginia, with a required delivery date of May 14, 2026. The procurement is governed by solicitation SPE7M5-26-T-399S, with a response deadline of August 20, 2026, issued under NAICS code 334419 by the Department of Defense’s Active Devices Division, and the contract is subject to federal acquisition regulations with designated government tracking identifiers for processing and distribution.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M5-26-T-398B
This contract pertains to the procurement of four rotary switches with NSN 5930-01-593-1045 under solicitation SPE7M5-26-T-398B, with a total quantity of 90 units required for delivery within 268 days of award. The item is governed by strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the cited source-controlled drawing mandates that all components must be sourced exclusively from approved suppliers listed on the drawing, with offers constituting agreement to this restriction. The product incorporates one or more components subject to Qualified Products Lists or Qualified Manufacturers Lists, and must adhere to specified configuration management protocols including the submission of Engineering Change Proposals or variance requests. The contractor is required to comply with all DLA packaging requirements and must not use Class I ozone-depleting chemicals under any circumstances, with substitutions subject to approval. The contract imposes significant compliance obligations including cybersecurity certification at CMMC Level 2, adherence to export control regulations under ITAR or EAR, and the restriction of technical data access only to contractors who hold valid US/Canada Joint Certification Program credentials, have completed required DLA training, and have received formal approval. Specialty metal requirements trigger the applicability of specific DFARS clauses, and inspection and acceptance must occur at the vendor’s origin. First article submission is mandatory, requiring the contractor to mark shipping containers in bold red lettering, provide written advance notice of shipment to the testing facility, and submit completed exhibits along with test reports, material certifications, operational sheets, and manufacturing drawings conforming to DI-NDTI-80809B. Government fit verification testing on the next higher assembly is required, and manufacturing production quantities before formal acceptance carries full vendor risk. Technical data associated with this item is tightly controlled and cannot be disclosed to foreign persons without prior authorization, with violations subject to severe compliance consequences.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7LX-26-U-9349
The contract is for a branched wiring harness with part number 1972960 and NSN 6150013696087, procured under solicitation SPE7LX-26-U-9349 by OSHKOSH DEFENSE LLC for the Department of Defense. A quantity of 460 units is requested at a unit price of $460.00, totaling $211,600, with delivery required within 158 days FOB origin. The item is covered under DLA Direct CONUS procurement and is subject to strict compliance with DLA packaging standards per RP001, MIL-STD-2073-1E, and MIL-STD-129 for marking, with no special marking required. Packaging must use unit container E5, intermediate container E5, and follow prescribed preservation methods including dry cleaning and no cushioning materials. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the contractor must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment, and the contract includes a zero variance allowance on quantity. All deliveries are subject to inspection and acceptance at the destination. The contract was posted August 9, 2026, with responses due by August 24, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-399Z
This contract pertains to the procurement of a shielding gasket for electronic applications, identified by NSN 5999-01-680-5990 and part number PG632000-06, with a quantity of three units. The item must comply with technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including specific methods for preservation, wrapping, and containerization using E5 unit containers with an OPI marking. The gasket is to be marked in accordance with MIL-STD-129 without any special marking code. Delivery is required within 20 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the point of origin. The destination is the Danish Defence Supply Agency in Vojens, Denmark, with Lars Hansen listed as the point of contact. Freight forwarding instructions reference DLA procedural notes C19 and C20, and the shipment is tied to project TP 2 under the contract number SPE7M5-26-T-399Z. The required delivery date is August 13, 2026, and the solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. The acquisition falls under NAICS code 334419 and is managed by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-14QV
This contract specifies the procurement of a cable assembly under solicitation SPE4A6-26-T-14QV for a quantity of 10 units with a delivery period of 347 days, to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 6150-20-007-7054 and must adhere strictly to DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. Packaging must be palletized in compliance with DLA procurement guidelines and fully exempt from any mercury or mercury-containing compounds in preservation, packaging, or marking processes. The contract enforces zero tolerance for non-conformances under sampling protocols that align with MIL-STD-1916 or ASQ H1331, applying stringent verification levels for critical, major, and minor attributes with zero acceptance criteria unless otherwise stated. The supplier, DRS Technologies Canada Ltd., is required to comply with all technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and all hardware must be free of intentional mercury use except in narrowly defined exceptions such as functional batteries or instrument sensors specified by NAVSEA, which must include secondary containment. The delivery date is set for July 31, 2027, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
ADAPTER, MECHANICAL
Solicitation # SPE7M0-26-T-035C
The contract is for one mechanical adapter with NSN 4940-01-381-1029 and part number VV86125103, issued under solicitation SPE7M0-26-T-035C by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at origin, and the item must be packaged per ASTM D3951 unless superseded by stricter DLA Master List of Technical and Quality Requirements, with all packaging labeled according to MIL-STD-129 and palletized per DLA packaging guidelines. The unit of issue is each, with a single unit ordered at a unit price of one dollar, totaling one dollar. The supplier is Falcon Supply located in Hoogerheide, Netherlands, with delivery instructions referencing DLAD Proc Notes C19 and C20 for transportation routing. The original required delivery date is August 12, 2026, and the contract includes specific government use codes and a point of contact at DLA for inquiries. All technical and quality standards referenced are governed by the DLA Master List, with version control tied to the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-5913
The contract specifies the procurement of a rotary switch identified by NSN 5930002598957, with stringent technical and quality requirements governed by MIL-DTL-15291/1C and MIL-DTL-15291H revisions, and packaging and preservation must comply with MIL-DTL-28786 and MIL-STD-2073-1E. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the product, including direct contact, preservation, packaging, and marking, with exceptions only for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. The item is classified as a critical application and requires conformity to the Qualified Products List or Qualified Manufacturers List. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging and marking must adhere to MIL-STD-129 without special markings, and parcel post is explicitly prohibited—shipments must use the VSM system via fastest traceable means with RDD 777 to the USS CARL VINSON CVN 70, FPO AP 96629. The contract includes four separate CLINs for identical items, each with unit pricing of $1.00, and the required delivery date is August 7, 2026. All documentation must reference the DoD authorized unit of issue, and technical requirements are pulled from the DLA Master List of Technical and Quality Requirements.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 541380
New
DIBBS
Radioactive Material Notification and Labeling (If Applicable)
Testing Laboratories and Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) Management
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332216
New
DIBBS
Thermostatic Switch Manufacturing and Supply
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Defense Logistics & FOB Origin Transportation Coordination
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Documentation
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 385110
New
DIBBS
Military Shipment Marking & Labeling

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 385110
New
DIBBS
Hazardous Materials Packaging & Preservation

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
Defense Component Manufacturing & Assembly
Audio and Video Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
COVER, ELECTRONIC CO
Solicitation # SPE7M8-26-T-5910
The contract covers the procurement of two units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 and part number G611721-1, under solicitation SPE7M8-26-T-5910, with a required delivery within five days of order issuance and a required delivery date of August 6, 2026. The unit price is $2.00 per unit, totaling $4.00, with no variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization guided by DLA Packaging Requirements for Procurement, and DLA’s Master List of Technical and Quality Requirements takes precedence over any conflicting standards. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. The goods must be shipped by the fastest traceable means, explicitly prohibiting parcel post, to the receiving facility at Tobyhanna Army Depot, Pennsylvania, with a designated freight address and marking instructions provided. The supplier must adhere to configuration change management, variance request protocols, and removal of government identification from non-accepted items. The unit of issue is each, and the contract references the DoD authorized unit of issue system. Government-specific identifiers, including IPD, DIC, DIST, and FC codes, are included for internal tracking. Contact for inquiries is Dondiego Boler at the provided phone and email, with full details accessible via the DIBBS portal.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, PROXIMITY
Solicitation # SPE7M8-26-T-5920
This contract, issued under solicitation number SPE7M8-26-T-5920 by the Department of Defense’s Defense Logistics Agency, is a total small business set-aside for the procurement of 26 units of a SWITCH, PROXIMITY item identified by NSN 5930016407418 and BAE Systems part number 8199762. The requirement is for a fixed-price delivery FOB origin with a 165-day delivery window from award, and all items must be inspected and accepted at the destination point, following the inspection clauses defined in FAR 52.246-2. The contract mandates strict compliance with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the revision effective at the award date controlling. Packaging and marking must adhere to RP001: DLA Packaging Requirements for Procurement and MIL-STD-129, with hazardous materials requiring compliance with FED-STD-313 and the Hazard Communication Standard (29 CFR 1910.1200), including correct labeling and submission of Safety Data Sheets prior to award. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except for specific functional uses such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable mercury-containing devices must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The solicitation incorporates a comprehensive suite of FAR and DFARS clauses, including cybersecurity safeguards under DFARS 252.204-7012, prohibition of covered telecommunications equipment, whistleblower protections, and NIST SP 800-171 assessment requirements. Payment must be processed electronically via Wide Area Workflow, and all offerors must be registered in the System for Award Management with current socioeconomic representations. The offeror must submit a Safety Data Sheet for any hazardous materials included; failure to do so renders the offer nonresponsible and ineligible for award. Quotations must be submitted via the DIBBS portal by August 20, 2026, and the contract may be awarded automatically if no first article testing is required, with HUBZone price preferences potentially applicable unless waived.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-5919
The contract is for the procurement of 29 rotary switches with NSN 5930-01-270-0602 under solicitation SPE7M8-26-T-5919, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 165 days upon award, and responses must be submitted by August 20, 2026. The acquisition is subject to DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the scale of the acquisition. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specified functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shockproof construction and a secondary containment boundary compliant with NAVSEA 5100-003D. Additionally, government identification must be removed from any non-accepted supplies, and the alternate offeror must submit a complete data package covering both the primary and alternate part specifications. The point of contact for inquiries is Dondiego Boler, with performance taking place in New Cumberland, Pennsylvania.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details