This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SWITCH, RADIO FREQUE

Closed

SPE7M5-26-T-336MFederal

Submission Closed07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334220

New

DIBBS

Supply of Waveguide Adapters (NSN 5985-01-304-0254)This subcontract involves the manufacture or sourcing of specialized waveguide adapters, specifically part NSN 5985-01-304-0254, for prime contractors delivering to the DLA Weapons Support Active Devices Division. The work requires the use of precision RF fabrication equipment and strict adherence to marking and labeling standards per MIL-STD-129. Packaging must comply with ASTM D3951 or specific TQ requirements IP025 and RP001 for palletization. The contract mandates CMMC Level 2 compliance and adherence to the Buy American Act. Interested parties must respond by November 12, 2026, for this requirement categorized under NAICS code 334220. The final deliverable is the fully packaged waveguide adapter meeting all specified technical and regulatory standards.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Antenna Component Supplier (NSN 5985014137074)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Antenna Hardware Supplier (NSN 5985-01-705-6845)This subcontract through the Department of Defense Active Devices Division involves the procurement and delivery of 10 antenna units, part number 12237-2740-01, manufactured by L3Harris Global Communications, Inc. The supplier is responsible for ensuring all hardware meets strict military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. The contract requires full compliance with the Buy American Act and the Berry Amendment. All accepted units must be delivered FOB Origin to Fort Carson, Colorado. This effort falls under NAICS code 334220 and supports prime contractors on DLA Land projects.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Cover Assembly (NSN 6685-00-867-0467)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of MAST (NSN 5985008562606)This subcontract involves the manufacturing of 35 completed MAST assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Active Devices Division. Production must strictly adhere to the technical data package for NSN 5985008562606 and the DLA Master List of Technical and Quality Requirements RA001. Notably, the use of additive manufacturing is prohibited for this project. Compliance requirements include a CMMC Level 2 self-assessment and adherence to RD002 standards for the handling of covered defense information. The opportunity falls under NAICS code 334220, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Attenuator Assembly (NSN 014676847)This subcontract involves the manufacture or procurement of one Attenuator Assembly, identified by NSN 014676847, to support prime contractors for the DLA Weapons Support Active Devices Division. The assembly must be produced using materials compliant with FSC 5985 and delivered through the DLA distribution system. Performance for this contract is centered in Virginia Beach. Strict production guidelines prohibit the use of additive manufacturing processes. Additionally, the contractor is required to ensure the domestic origin of materials or provide full disclosure for any non-domestic components used. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Radome Manufacturing (NSN 5985-01-306-0418)This subcontract involves the manufacture of eight certified Radome units, which serve as protective enclosures for radar antennas under NSN 5985-01-306-0418. The project is managed by the Department of Defense through the DLA Weapons Support Active Devices Division and will be performed in San Diego. Fabrication must adhere to strict quality control standards, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the contractor must maintain CMMC Level 2 certification to ensure the secure handling of Covered Defense Information and must comply with the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 334220 for the production of specialized radio frequency devices.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacturer of Radio Frequency Cable Assemblies (NSN 5995-01-617-3741)This subcontract opportunity is for the manufacture and supply of radio frequency cable assemblies to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for fabricating assemblies according to NSN 5995-01-617-3741 and Celltron part number A3308498-3, utilizing precision termination and testing equipment. All deliverables must adhere to MIL-STD-1916 or ASQ H1331 quality standards, and the contractor is required to complete a CMMC Level 2 self-assessment. The project is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division and is designated as a Total Small Business Set-Aside. Interested parties must respond by November 11, 2026. The contract falls under NAICS code 334220 and focuses on the delivery of finished RF cable assemblies.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Television Cameras (NSN 5820-01-591-2858)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RF Cable Assembly Fabrication (PN: 5995-01-260-4137)This subcontract involves the fabrication and assembly of six Radio Frequency Cable Assemblies under part number 5995-01-260-4137 for the DLA Weapons Support ASC Commodities Division. The scope of work includes the cutting, stripping, soldering, and terminating of RF cables, requiring the use of precision termination tools and signal integrity testing equipment. All final products must be packaged according to MIL-STD-2073-1E standards. To be eligible, the contractor must maintain CMMC Level 2 certification, participate in the US/Canada Joint Certification Program, and ensure full ITAR and EAR compliance. The project falls under NAICS code 334220 and is performed in the 95304-5000 zip code area. Responses for this requirement are due by November 11, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

GAGE ROD, LIQUID LEVEL

Solicitation # SPE4A5-27-T-1397

Solicitation SPE4A5-27-T-1397, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for the procurement of liquid level gage rods, identified by NSN 6680014692244 and Metrex Valve Corp part number 50M-335. The requirement consists of three separate line items, each for a quantity of one unit. Delivery is required within 20 days after order, with an original required delivery date of October 9, 2026. The items are to be delivered FOB Destination to the USS Cleveland (LCS 31) via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Packaging must comply with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the contractor must utilize the Wide Area WorkFlow system for invoicing and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1684

Solicitation SPE7M1-27-T-1684, issued by the DLA Weapons Support Maritime Supply Chain, is a request for the procurement of two antennas, identified as critical application items. The required hardware is specified as NSN 5985016677236, part number PLK10054915-501 FN 22 from L3 Technologies, Inc. Delivery is required within 238 days after order, with the shipment destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Security and compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with the Buy American Act. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DLA Internet Bid Board System by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 12 days

AI Contract Overview

This contract solicits two units of a radio frequency switch with part number 5985-01-463-5144, under solicitation SPE7M5-26-T-336M, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must meet or exceed the specifications of the cited technical data even if incomplete. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with designated verification levels or AQLs. The supplier must ensure all packaging complies with MIL-STD-2073-1E and MIL-STD-129, with special emphasis on ESD and EMI protection as mandated by MIL-PRF-81705, using only materials from qualified manufacturers listed on QPL-81705. ESD protection requires Type I barrier material and Type III wrap unless specified otherwise, and EMI protection requires Type I barrier material. Components with pins or leads must have adequate cushioning to prevent physical damage during handling and transport, and all packaging must be executed at approved ESD/EMI protective workstations. The item is subject to DOD Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and the supplier is responsible for adherence to DLA packaging requirements, including proper marking with special code 39 indicating ESD-sensitive electronic device status. Delivery is due in 157 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes specific transportation instructions per DLAD Proc Note C19 and C20, with a required delivery date of November 26, 2027, and a need ship date of January 5, 2027.

General Info

Two RF switches ordered for delivery to New Cumberland, PA, with strict ESD/EMI, packaging, and cybersecurity compliance by November 26, 2027.

Agency

Department Of Defense → ACTIVE DEVICES DIVISION

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE7M5-26-T-336M for DLA Land and Maritime

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 20

Combined Synopsis

Response DeadlineJul 31

Deadline has passed

Submission Closed

07/31/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Office AddressUSA

Contacts

Matthew Stanko

contact@example.gov

+1 (555) 000-0000

Full Description

SWITCH,RADIO FREQUE
SWITCH,RADIO FREQUENCY TRANSMISSION LINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CAES MISSION SYSTEMS LLC 32187 P/N MD-012C047 RAYTHEON COMPANY 49956 P/N 11476015
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-336M
SECTION B
PR: 7017438256 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438256 0001 EA 2.000
NSN/MATERIAL:5985014635144
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE7M5-26-T-336M
SECTION B
PR: 7017438256 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/05/2027 Original Required Delivery Date:11/26/2027
SPE7M5-26-T-336M NSN/Part Number: 5985-01-463-5144 Quantity: 2 EA Purchase Request: 7017438256QTY: 2 Delivery: 157 days ADO