Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH, ROTARY

Active
SPE7M8-26-T-5927Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three rotary switches with NSN 5930-01-086-9167 under solicitation SPE7M8-26-T-5927, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 164 days from award, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and is classified under NAICS code 334419 for other electrical equipment and component manufacturing. Packaging and technical specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The alternate offeror must provide a complete data package including full documentation for both the approved and alternate parts. Government identification must be removed from any non-accepted supplies. Primary point of contact is Dondiego Boler, reachable via email and phone provided, with additional details accessible through the DIBBS portal.

General Info

Procure three rotary switches NSN 5930-01-086-9167, deliver by 164 days to New Cumberland, PA.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M8-26-T-5927 for Electrical Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,ROTARY
ITEM NAME SWITCH,ROTARY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5930-01-086-9167 Quantity: 3 EA Purchase Request: 7017780491QTY: 3 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5929
The contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-136-2648, quantity of seven units, under purchase request 7017775655. The item is classified as a commercial item, including commercial of a type, and no specific technical or quality data is provided directly in the contract; instead, all such requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. The revision of the Master List in effect on the solicitation issue date governs compliance unless an amendment supersedes it. The supplier must provide a complete data package for both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. Delivery is required within 164 days of delivery order issuance, with performance to occur at Cherry Point, North Carolina, 28533-5040. The solicitation, numbered SPE7M8-26-T-5929, was posted on August 10, 2026, with responses due by August 21, 2026. The North American Industry Classification System code is 334419, and the contracting agency is the Electrical Devices Division within the Department of Defense. The contract is a federal solicitation with no designated set-aside classification. Primary point of contact is Dondiego Boler, reachable via email at dondiego.boler@dla.mil or phone at 6146927047. Additional details and documents may be accessed through the DIBBS portal using the provided UI link.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
TAPE, SHIELDING, ELEC
Solicitation # SPE7M5-26-T-400T
The contract pertains to the procurement of electrical shielding tape, specifically identified by NSN 5999-01-655-1087 and part number 416T2211-4, with a requirement for one unit per line item, delivered FOB origin within 20 days. The item is designated as a critical application component for Boeing and is subject to stringent technical and quality controls, including compliance with MIL-STD-130 for Item Unique Identification (IUID) and MIL-STD-129 for marking. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016, and all packaging and preservation must conform to MIL-STD-2073-1E and DLA packaging standards, with specific preservation methods, wrap materials, and packaging codes defined. The item carries a Type 2 shelf life of 12 months, extendable, and requires FAA airworthiness approval. Sampling and inspection procedures follow MIL-STD-1916 or equivalent zero-defect acceptance criteria, with all unspecified attributes treated as major. Delivery must be made via traceable freight methods—parcel post is prohibited—with designated freight and parcel post addresses identified for two separate locations: Altus Air Force Base, Oklahoma, and McConnell Air Force Base, Kansas. The contract enforces strict configuration change management, requiring formal engineering change proposals for any deviations, and no quantity variance is permitted beyond zero percent. The original required delivery date is August 3, 2026, for the first line item and August 6, 2026, for the second. All technical requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contractor is obligated to adhere to all applicable clauses under DFARS 252.211-7003 and related DLA directives.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-14RT
The contract is for the procurement of two BUS, CONDUCTOR units with NSN 6150-01-577-6478, under solicitation SPE4A6-26-T-14RT, with a response deadline of August 18, 2026, and a required delivery within 20 days of award. This procurement is governed by multiple technical and compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2 certification for the third-party assessment organization, adherence to DLA packaging standards, and strict protocols for the removal of government identification from non-accepted supplies. The item involves technical data subject to export control under either ITAR or EAR, requiring explicit authorization prior to any export or disclosure to foreign persons, including foreign nationals within the United States, and DFARS 252.225-7048 applies to ensure compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DLA-mandated training on export-controlled technical data handling, and formal approval from DLA authorities. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The point of contact is Chinh Le at the ASC Commodities Division, Department of Defense, and performance is to occur at FPO, ZIP 96694.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-14SH
The contract specifies the procurement of a cable assembly with NSN 6150016095688, issued under solicitation SPE4A6-26-T-14SH by the Department of Defense’s ASC Commodities Division. Four identical quantities of one unit each are ordered under separate CLINs, each destined for different U.S. Navy ships—USS Roosevelt, USS McCampbell, USS Chafee, and USS Bulkeley—with delivery required within 20 days of contract award to FOB destination. Strict packaging and handling protocols mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including preservation methods, unit container types, and palletization per DLA’s packaging requirements. The use of mercury or mercury compounds in any phase of preservation, packaging, or marking is strictly prohibited. All items must be inspected and accepted at the delivery point with zero tolerance for quantity variance. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. Shipping is coordinated through DLA’s vendor systems, with transportation instructions referencing specific DLA procedural notes. The required delivery dates range from August 4 to August 7, 2026, with a centralized point of contact provided for procurement inquiries.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M5-26-T-400M
The contract pertains to the procurement of a SWITCH, TOGGLE, identified by part number 407-43105 and NSN 5930-01-560-7497, with a quantity of 30 units at a unit price of $30.00, totaling $900.00. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, specifically referencing technical requirement IP025, which supersedes general commercial packaging standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement (RP001). If the item is deemed hazardous under FED-STD-313, it must be packaged in accordance with SPE7M5-26-T-400M; otherwise, commercial packaging per ASTM D3951 is acceptable, provided DLA standards take precedence. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery window is 111 days from the contract award, with a target ship date of December 11, 2026, and original delivery due by December 24, 2026. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, using the specified parcel post and freight shipping addresses. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE7M5-26-T-400M, with a response deadline of August 21, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5925
The contract pertains to the procurement of a sensitive switch, identified by NSN 5930-00-052-3260 and part number MS16106-3, with a strict requirement that no mercury or mercury-containing compounds be intentionally added or come into direct contact with the hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents designated by NAVSEA. Portable devices containing mercury must be shockproof and equipped with a secondary containment boundary in compliance with NAVSEA 5100-003D. Preservation, packaging, and marking must entirely exclude mercury and adhere to ASTM-D3951 commercial packaging standards, while packaging and labeling follow MIL-STD-2073-1E and MIL-STD-129 with no special marking codes. The item is classified as a critical application and must be sourced from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List, with technical design controlled under MIL-PRF-8805K and MIL-PRF-8805/3M specifications. Delivery is required within 164 days, with an original delivery date of July 1, 2027, and a need-by date of February 2, 2027, under FOB origin terms, with inspection and acceptance occurring at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the unit of issue is each. The contract calls for 118 units at a unit price of $118.00, totaling $13,924, under solicitation SPE7M8-26-T-5925, issued by the Department of Defense’s Electrical Devices Division with a response deadline of August 21, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6200
This contract is for the procurement of 52 push switches designated by NSN 5930009692683 and associated part numbers from DRS Naval Power Systems Inc and Eaton Corp, categorized as critical application items. The supplies must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lights, instruments, weapon systems, or specified reagents. Mercury-containing portable lamps and instruments must feature shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The items are subject to inspection and acceptance at the destination, with no tolerance for quantity variance. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-28786, with marking following MIL-STD-129 and no special marking required. Palletization shall conform to DLA packaging requirements, and hazardous materials handling must meet IP025 specifications. Delivery is FOB origin with a required delivery date of April 4, 2027, and a shipment deadline of February 26, 2027. All supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under the solicitation SPE7M2-26-T-6200, which was issued on August 10, 2026, with responses due by August 21, 2026. The unit of issue is each (EA), at a fixed price of $52.00 per unit.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FILTER, BAND PASS
Solicitation # SPE7M5-26-Q-0817
A band pass filter with NSN 5915-01-025-5052 is being solicited under contract SPE7M5-26-Q-0817 by the Defense Logistics Agency under the Department of Defense. The requirement calls for 13 units and was posted on August 10, 2026, with responses due by August 19, 2026. The solicitation is open to federal entities with no specific set-aside classification indicated. The place of performance and point of contact details are not provided, and delivery is expected within the United States. Bidders must submit proposals through the official DIBBS portal using the provided UI link to ensure proper consideration.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-Q-0838
This contract pertains to the procurement of 54 units of a radio frequency filter identified by NSN 5915-01-725-3943, with a delivery requirement 425 days after the award date. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 for marking and labeling; hazardous materials must be packaged per TQ requirement IP025 while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Palletization must follow DLA guidelines, and the unit of issue is each (EA) with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The item is to be delivered to the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7M5-26-Q-0838 with a response deadline of August 20, 2026, and a posted date of August 10, 2026. The requesting activity is the Department of Defense, and the point of contact is Jeffrey Heck. The material need date is January 19, 2026, and the procurement falls under NAICS code 334419. All packaging must include the specified QUP and comply with DLA’s unit of issue standards, and government identification must be removed from any non-accepted supplies in accordance with RQ011.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-Q-0840
The contract pertains to the procurement of 60 units of a Radio Frequency Filter with NSN 5915-01-721-6658 and part number RF14034-2A from EMS Development Corporation, issued under solicitation SPE7M5-26-Q-0840. Delivery is required 382 days after award of contract, with FOB origin and inspection and acceptance both occurring at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any general commercial standards. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 for marking and labeling, and must follow RP001 for palletization; if the material is non-hazardous per FED-STD-313, it must be packaged per ASTM D3951, but DLA requirements take precedence. Hazardous materials require compliance with TQ requirement IP025. The Unit of Issue is each (EA), with no variance permitted in quantity. All packaging and shipping must meet DLA’s procedural standards, with delivery directed to the DLA Distribution facility at New Cumberland, Pennsylvania. The contract is governed by DLA systems and procedures, including transportation rules specified in DLAD Proc Note C19 and C20, and the purchase request number is 7015892854. The contract was posted August 10, 2026, with responses due August 25, 2026, and the material is needed for shipment no later than June 8, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M5-26-T-400G
This contract specifies the procurement of six crystal oscillators under Solicitation SPE7M5-26-T-400G, with a delivery window of 478 days after contract award. The item is identified by NSN 0001S00000052 and falls under a total small business set-aside, targeting manufacturers classified under NAICS code 334419. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation issue date. The contract imposes stringent quality controls including tailored higher-level requirements, configuration change management, and inspection and acceptance at the manufacturer’s origin. All supplies must adhere to DLA packaging standards and require removal of government identification from non-accepted items. Export control is strictly enforced due to the presence of technical data subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization may access this controlled data. Cybersecurity compliance mandates CMMC Level 2 certification from a certified third-party assessment organization, and covered defense information protocols apply. Performance is designated at Robins Air Force Base, Georgia, with the point of contact being Jeremy Etringer of the Department of Defense’s Active Devices Division. The solicitation was posted August 10, 2026, with responses due by August 21, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-U-3316
The contract is for the procurement of 239 units of a special-purpose electrical cable assembly, identified by NSN 6150-01-513-3345, under solicitation SPE4A6-26-U-3316, which is a total small business set-aside under NAICS code 334419. Delivery is required within 242 days after award, with the solicitation issued on August 10, 2026, and responses due by August 25, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, using zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs—VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor—with unspecified features treated as major. Physical identification and marking of items must comply with RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. Packaging must adhere to DLA standards and export control regulations for technical data under ITAR or EAR, prohibiting any disclosure to foreign persons without authorization. Only contractors with an approved US/Canada Joint Certification Program status, completed export control training, and DLA approval may handle the controlled data, with DFARS 252.225-7048 applicable. Additionally, the vendor must be a CMMC Level 2 certified C3PAO, ensuring compliance with cybersecurity maturity standards tied to the performance of this contract.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335313
New
DIBBS
MODULE, SWITCH
Solicitation # SPE7M8-26-T-5931
This contract is for the procurement of a single switch module identified by NSN 5930-01-472-5978 and part number 5M/0066, supplied by STACO SYSTEMS, INC. The item is a restricted source requiring government engineering approval and must strictly comply with applicable technical and quality requirements referenced from the DLA Master List, including preservative and packaging standards per MIL-DTL-28786 and MIL-STD-2073-1E. All packaging and marking must conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging guidelines. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be pre-approved unless explicitly permitted by specification. The delivery is FOB origin with no tolerance for quantity variance, inspection and acceptance occur at destination, and the item must be delivered within 164 days of contract award. The required delivery date is January 26, 2027, with a need ship date of February 2, 2027. The consignment is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transport protocols outlined in DLAD Proc Note C19 and C20. The contract was solicited under SPE7M8-26-T-5931 with a response deadline of August 21, 2026, and falls under NAICS code 335313 for electrical device manufacturing.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-5928
The contract specifies the procurement of a pressure switch identified by NSN 5930-01-300-7740 and part number 205-076-044-9, with a requirement for 45 units to be delivered within 321 days from the contract date. The items must conform to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 when applicable. The product is classified as a critical application item with approved suppliers including ITT Aerospace Controls LLC, Hydra-Electric Company, and Custom Control Sensors LLC. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with DLA-specific requirements including MIL-STD-129 labeling and palletization per RP001, with hazardous materials requiring adherence to TQ requirement IP025 and non-hazardous items meeting ASTM D3951. Delivery is FOB origin to the specified receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to configuration change management procedures, and any deviation or waiver must be formally requested. The unit of issue is each, with no variance allowed in quantity, and the need ship date is July 9, 2027, while the original required delivery date is October 27, 2027. All documentation and compliance must align with the referenced DLA procurement and transportation protocols.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5924
The contract pertains to the procurement of a switch and toggle assembly identified by NSN 5930-01-480-7051 and part number SW0175, with a total quantity of 123 units at a unit price of $123.00, resulting in a total contract value of $15,129.00. Delivery is required FOB origin within 164 days of contract award, with no tolerance for quantity variance. The items must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951 if there is a conflict. Non-hazardous items must be commercially packaged per DLA requirements, while hazardous items must adhere to Fed-Std-313 and TQ requirement IP025. All packaging and labeling must meet MIL-STD-129 standards, and palletization must conform to RP001 DLA Packaging Requirements. The unit of issue is each, with one unit per pack, and transportation is governed by DLA Procurement Notes C19 and C20. The solicitation number is SPE7M8-26-T-5924, issued under the NAICS code 335313 for Electrical Equipment and Component Manufacturing by the Department of Defense’s Electrical Devices Division. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026. The required delivery date is April 17, 2027, but the need ship date is February 2, 2027, indicating an internal timeline for shipment preparation. The primary point of contact is Dondiego Boler, reachable via phone and email provided, and all technical and quality specifications referenced are sourced from the official DLA Master List of Technical and Quality Requirements. The contract stipulates that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s standardized procurement protocols for simplified acquisition procedures.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5932
This contract is for the procurement of eight sensitive switches identified by NSN 5930-01-727-7888 and part number 13001667 from FAIRBANKS MORSE, LLC under solicitation SPE7M8-26-T-5932. Delivery is required within 164 days from the award date, with the original required delivery date set for January 19, 2027, and a need ship date of February 2, 2027. Items must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply strictly with MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging of switches, with marking conforming to MIL-STD-129 and no special marking codes required. Palletization must follow DLA’s packaging requirements and all components must be free of Class I ozone-depleting chemicals, which are prohibited regardless of any conflicting specification requirements. Substitute chemicals must receive prior approval unless explicitly authorized. The item is classified as a critical application item, and covered defense information may apply. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List available online, with revisions controlled based on acquisition scale and solicitation amendments. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation guidelines outlined in DLAD Proc Notes C19 and C20.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
BLADDER, BOAT
Solicitation # SPE7M8-26-T-5933
The contract solicitation seeks a single bladder for boat applications identified by NSN 2090-01-569-4403 with a quantity of one unit and a delivery requirement of five days after order award. The purchase request number is 7017791742, and the solicitation is issued under contract number SPE7M8-26-T-5933 with a response deadline of August 21, 2026. The acquisition falls under NAICS code 326199 and is managed by the Electrical Devices Division of the Department of Defense, with the place of performance specified as Suffolk, Virginia, 23435-5000. The primary point of contact is Dondiego Boler, reachable via email and phone listed in the contract data. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with references to RD004 for CMMC Level 2 Self-Assessment, RP001 for DLA packaging standards, and RD002 for Covered Defense Information applicability. The alternate offeror must submit a complete data package including details for both the approved and alternate parts. For simplified acquisitions, the version of the master list in effect on either the solicitation issue date or award date controls compliance.
All Other Plastics Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334513
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-5926
The contract pertains to the procurement of a pressure switch with NSN/Part Number 5930-01-307-9187, in a quantity of 96 units, under solicitation SPE7M8-26-T-5926. The item is subject to strict technical and quality requirements aligned with the DLA Master List, and it falls under the scope of cybersecurity compliance as a CMMC Level 2 certified third-party assessment organization. It is classified as covered defense information, requiring adherence to export control regulations under ITAR or EAR, with technical data strictly restricted to authorized U.S. contractors who have obtained JCP certification, completed mandatory DOD export control training, and received formal approval from DLA to handle such data. The delivery timeline extends to 519 days after order, with performance location specified as Corpus Christi, Texas, 78419-5255. Inspection and acceptance are to occur at the origin, and non-accepted supplies must have all government identification removed prior to disposal. The contracting agency is the Department of Defense's Electrical Devices Division, with primary point of contact Dondiego Boler, and the solicitation opened on August 10, 2026, with responses due by August 21, 2026. The NAICS code 334513 indicates classification under the manufacturing of electromagnetic and electrical components.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5930
The item requested is a SWITCH, TOGGLE with NSN 5930-01-198-7874, with a quantity of 72 units, under purchase request 7017775946. Delivery is required within 54 days after contract award. This procurement is governed by strict export control regulations under ITAR or EAR, meaning all technical data associated with the item is restricted and cannot be disclosed to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Access to this technical data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed the required DOD export control training and questionnaire, and have received explicit approval from the DLA controlling authority. DFARS 252.225-7048 applies to the handling and protection of this controlled information. The solicitation number is SPE7M8-26-T-5930, posted on August 10, 2026, with responses due by August 21, 2026. The NAICS code is 334419, and the contract is being managed by the Electrical Devices Division of the Department of Defense, with performance located at Hill AFB, Utah. Primary point of contact is Dondiego Boler, reachable at 614-692-7047 or dondiego.boler@dla.mil.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE7M8-26-T-5923
The contract pertains to a single unit of a special-purpose electrical cable assembly, part number 1702508, with NSN 5995-01-299-7694, supplied by Raytheon Company under CAGE code 05869. The item must be delivered within 20 days to Fort Campbell, Kentucky, with delivery terms as FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Master List of Technical and Quality Requirements, which override other standards. Palletization must follow DLA’s packaging guidelines, and no variance is permitted in quantity. The item requires CMMC Level 2 Self-Assessment compliance and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All packaging and labeling must include proper government identification, and non-accepted supplies must have government markings removed per contract stipulations. Shipment must be sent via the fastest traceable method, excluding parcel post, to the designated military supply facility. The procurement is issued under solicitations number SPE7M8-26-T-5923, with a required delivery date of August 6, 2026, and a response deadline of August 21, 2026. The contract specifies a unit price of $1.00 for a single unit, with no total price beyond that. The NAICS code is 334419, and the contracting office is under the Department of Defense’s Electrical Devices Division. Point of contact is Dondiego Boler, with the delivery and shipping address located at Fort Campbell, Kentucky. The shipment is tracked under RDD 777, project TP 2, and includes a supplier address identifier and government use codes. The unit of issue is EA, and the delivery must be made under exact quantity and packaging controls as defined, with no flexibility permitted on quantity or marking requirements.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Labeling and Safety DataThe contract requires the provision of hazard labels and Material Safety Data Sheets for all hazardous components in compliance with OSHA 29 CFR 1910.1200, ensuring proper identification and handling of dangerous materials. This subcontract is issued under the NAICS code 541620 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, to meet the deadline. All materials and documentation must adhere strictly to federal safety regulations to support safe operations and regulatory compliance across the supply chain.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Export Control and Technical Data ComplianceThis contract requires strict adherence to export control regulations, specifically DFARS 252.225-7048 and RQ032, ensuring all technical data and documentation are managed in compliance with ITAR and EAR requirements. Responsibilities include implementing robust access controls, secure handling procedures, and maintaining full audit readiness to demonstrate compliance throughout the contract lifecycle. The work is to be performed at Tracy, California, with a zip code of 95304-5000, and falls under the NAICS code 541611, indicating it is related to scientific research and development services. The contract is structured as a subcontract, with a response deadline of August 20, 2026, and was posted on August 9, 2026, under the Department of Defense’s Electrical Devices Division. All technical data must be safeguarded against unauthorized access or disclosure, and systems must be configured to support ongoing compliance monitoring and documentation retention as required by federal export control standards.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details