Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

System Installation and DICOM/PACS Integration Services

Active

Federal

Response Deadline07/27/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the onsite installation, configuration, and integration of an ultrasound system with the Government PACS environment using DICOM 3.0 standards, requiring comprehensive network setup and operational testing to ensure full compatibility and functionality. The work must be performed at the location in Kyle, with all activities focused on delivering a fully operational imaging system that adheres to federal healthcare data exchange protocols. The effort demands technical expertise in medical imaging systems, DICOM compliance, and secure network integration within a government healthcare setting. This is a subcontract under the Indian Small Business Economic Enterprise set-aside program, specifically designated for the Department of the Interior and Indian Health Services, with the NAICS code 541330 indicating medical and diagnostic laboratory services. The solicitation was posted on July 9, 2026, and responses are due by July 27, 2026, with the award intended to support the Great Plains Area Indian Health Service in enhancing diagnostic imaging capabilities. Participation is restricted to eligible Indian-owned small businesses, reflecting a commitment to tribal economic development and healthcare infrastructure improvement.

General Info

Onsite ultrasound integration with PACS using DICOM 3.0 at Kyle for Indian Health Services under small business set-aside.

Agency

Department Of Health And Human Services → Great Plains Area Indian Health SvcView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Kyle, SD, USA

Set-Aside

ISBEE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 9

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 09:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Health And Human Services → Great Plains Area Indian Health Svc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Health And Human Services → Great Plains Area Indian Health Svc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Onsite installation, configuration, and integration of the ultrasound system with Government PACS using DICOM 3.0 standards, including network setup and operational testing.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects. These services will span all phases of project delivery including planning, design, construction, and closeout, and will apply to various project delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The contractor will be responsible for ensuring projects adhere to established schedules, budgets, and quality standards while assisting the Port in achieving its infrastructure goals. This solicitation is classified under NAICS code 541330 and is forecasted for posting on July 18, 2026, with no set-aside designation specified. Primary point of contact for inquiries is Hala Rabbo, reachable via email or phone, with Ann Davidson serving as the Project Manager. All work is expected to be performed at Port of Seattle facilities, though specific location details are not provided. Interested parties should monitor the Port’s solicitation portal for the formal request for proposals when it becomes available.

Construction Management

POSTED

about 4 hours ago

DEADLINE

REQUEST FOR PROPOSALS (RFP) FOR ARCHITECTURE AND ENGINEERING SERVICES FOR TWO (2) AQUATIC CENTERSThe City of Dallas is seeking qualified architectural and engineering firms to deliver professional services for the design and development of two separate aquatic center facilities: the Singing Hills Aquatic Center and the Jaycee Zaragoza Aquatic Center. Each project will be awarded under an individual contract, ensuring distinct project management and performance requirements. Proposals must be submitted in response to two solicitation numbers, PKR-2026-00030846 and PKR-2026-00030847, with a deadline for submissions set for August 7, 2026, at 6:00 PM Central Time. All work will be performed within the state of Texas, specifically at the respective facility locations in Dallas. The solicitation was posted on July 17, 2026, and interested firms are directed to the official city procurement portal for detailed requirements and submission guidelines. Kamil Miskowiec serves as the primary point of contact for inquiries regarding the procurement process and can be reached via email.

POSTED

about 13 hours ago

DEADLINE

Specialty Inspection and Compliance VerificationA third-party inspection contract has been issued to verify the structural integrity, proper anchoring, and full compliance with Florida pool safety codes and local municipal standards for recreational water facilities. This subcontract is scoped to ensure all inspected pools and related infrastructure meet state-mandated safety requirements and are securely installed according to certified engineering practices. The inspection process will include on-site evaluations, documentation review, and formal reporting to confirm adherence to regulatory benchmarks established by Florida and applicable city authorities. The contract, titled Specialty Inspection and Compliance Verification, falls under NAICS code 541330 for architectural and engineering services and is managed by the Florida Parks and Recreation agency. It was posted on July 17, 2026, with a response deadline of August 18, 2026, allowing qualified inspectors or firms to submit proposals. The place of performance spans locations under Florida’s jurisdiction, though specific cities are not listed, and all work must be conducted in alignment with state and local safety regulations. This contract is not subject to set-aside classifications and is accessible through the procurement portal linked in the solicitation.

Parks and Recreation

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Structured Parking & Shared Parking DesignThe contract entails the design of a structured parking facility to accommodate over 265 transit users and an additional 182 spaces designated for a library and community center, with a focus on integrated shared parking strategies to optimize space utilization and operational efficiency. The scope includes conducting a comprehensive shared parking analysis to evaluate demand patterns, peak usage times, and synergies between transit ridership and community center visitors, ensuring the design supports seamless operational integration and minimizes redundant infrastructure. The project is categorized under NAICS code 541330 for architectural and engineering services and is structured as a subcontract solicitation with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, and performance is expected to align with local planning and transportation goals, though specific location details are not provided. The solicitation is publicly accessible via the OpenGov procurement portal, indicating transparency and a competitive bidding process aimed at selecting qualified design professionals to deliver a functional, scalable, and user-centric parking solution.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

On-Site & Off-Site Roadway and Traffic EngineeringThe contract pertains to the design of access roads, dedicated turn lanes, and traffic signal modifications aimed at enhancing multimodal traffic flows at a transit center. The scope of work focuses on engineering solutions that improve connectivity and efficiency for vehicles, pedestrians, and transit users, ensuring smoother and safer movement around the facility. All design efforts are intended to support integrated transportation networks and accommodate growing demand in a multimodal environment. This is a subcontract under the NAICS code 541330 for architectural and engineering services, posted on July 17, 2026, with a response deadline of August 25, 2026. The work is associated with the Tennessee Engineering agency, though specific location details such as city or zip code are not provided. The project is managed through the Nashville procurement portal, and bidders must submit proposals by the stated deadline to be considered. While the agency organization and point of contact are unspecified, the performance location is tied to the transit center requiring these roadway and traffic enhancements.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Antioch Transit Center Design RFQThe Antioch Transit Center will be constructed on the former Global Mall site at 5252 Hickory Hollow Parkway, strategically located north of Bell Road and east of I-24, to serve as a multimodal transportation hub anchored by high-frequency Bus Route 55 connecting the Hickory Hollow area to Downtown Nashville. The facility is a foundational element of the adopted Global Mall Area Master Plan, which aims to transform the underutilized retail property into a vibrant, mixed-use district featuring cultural amenities, mixed-income housing, and retail spaces. The transit center will include 11 bus bays to accommodate current and future routes including the planned Crosstown Connector and Express services, structured parking with a minimum of 265 transit spaces and 182 additional spaces for the adjacent library and community center, approximately 4,000 square feet of passenger and employee amenities, and up to 19,000 square feet of ground-floor retail shell space. The design must integrate seamlessly with the surrounding community infrastructure, which includes Nashville State Community College’s satellite campus, the Ford Ice Center, the Southeast Branch of the Nashville Public Library, and the Metro Parks Southeast Regional Community Center, whose existing parking lot currently functions as a park and ride and WeGo Link transfer point. In addition to the transit center itself, the project requires comprehensive design services for on- and off-site roadway and traffic signal improvements to support increased multimodal traffic flows. These include new onsite access roads, dedicated turn lanes, and modifications to traffic signals, as outlined in supporting operational analyses and concept diagrams. The Consultant must align all design work with the 2024 Global Mall Area Master Plan and Specific Plan zoning BL2024-448, as well as incorporate findings from prior WeGo studies related to parking, transit operations, and future residential development potential atop the structure. The project has already completed its NEPA environmental review, relieving the Consultant of further environmental documentation responsibilities. Project management will be led by WeGo with oversight from the Capital Program Management Consultant, and the final design must prioritize rider experience, safety, accessibility, operational efficiency, and long-term economic vitality while accommodating future joint development opportunities with private partners. The solicitation closes on August 25, 2026, and responses are expected from architecture, landscape architecture, and engineering firms prepared to deliver a cohesive, forward-looking transit infrastructure aligned with Nashville’s broader mobility goals.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Uniform Quality Inspection and Compliance TestingThe contract titled Uniform Quality Inspection and Compliance Testing requires a third-party provider to conduct thorough inspections of uniforms to ensure material quality, stitching integrity, and full adherence to NFPA standards and procurement specifications. The inspection process will verify that all uniforms meet established safety and durability requirements critical for emergency medical personnel, with particular attention to compliance with federal and internal procurement guidelines. This subcontract is issued by the Emergency Medical Services agency in New York and is open for response until August 13, 2026, with a NAICS code of 541330 indicating it falls under the category of professional, scientific, and technical services related to testing laboratories. The inspection work will be performed regardless of specific location, as no place of performance has been designated, allowing flexibility for the contractor to conduct evaluations across supply chains or distribution centers as needed. The project is not designated for any specific set-aside and is open to eligible third-party inspection firms capable of delivering accurate, reliable, and documented compliance results. All findings must be meticulously recorded and submitted to confirm that every uniform batch meets mandatory safety and quality benchmarks prior to delivery to emergency responders. The contract is accessible through a public procurement portal, and interested parties must submit proposals by the specified deadline to be considered for award.

Emergency Medical Services

POSTED

about 17 hours ago

DEADLINE

Quality Inspection and Government Acceptance SupportThis contract, titled Quality Inspection and Government Acceptance Support, is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and is classified under NAICS code 541330 for engineering services. The primary objective is to provide comprehensive support for government inspection and acceptance processes by ensuring all deliverables meet contractual obligations and Federal Acquisition Regulation 46 quality standards. Key responsibilities include the preparation and maintenance of detailed documentation, establishing and preserving traceability throughout the supply and production chain, and verifying full conformance to all specified terms and requirements. The contract was posted on July 17, 2026, and is tied to the award number SPE7LX26D0002 with delivery order SPE7L126FAU4Y. While specific performance location and point of contact details are not provided, the scope requires continuous adherence to federal quality protocols and an emphasis on meticulous recordkeeping to facilitate smooth government acceptance. The subcontractor must operate with precision to support Defense Logistics Agency objectives, ensuring that all systems, components, and processes comply with the rigorous quality assurance frameworks mandated by the Department of Defense.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Value Engineering Change Proposal (VECP) DevelopmentThis contract pertains to the development of a Value Engineering Change Proposal aimed at identifying and implementing cost-saving design or process improvements within defense logistics operations. The work requires rigorous performance validation and comparative analysis to demonstrate measurable efficiency gains, resource reductions, or operational enhancements that can be endorsed by government authorities. The effort must align with established federal standards and deliver demonstrable results that justify adoption by the Defense Logistics Agency under the Department of Defense. The contract is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services focused on engineering support. Performance is expected to occur in alignment with the agency’s operational requirements, though specific geographic details are not provided. The solicitation was posted in mid-2026 and links to a formal award record through the DIBBS system, signifying its place within a broader procurement framework managed by the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Quality Assurance & Higher-Level Inspection ServicesThe contract encompasses independent quality assurance services including audits, inspections, and test validation to ensure full compliance with Defense Logistics Agency quality standards and the Federal Acquisition Regulation provision FAR 52.246-11. These services are designed to uphold rigorous quality controls across all deliverables and processes, ensuring adherence to federal defense procurement requirements. The work is classified as a subcontract under the NAICS code 541330, indicating specialized engineering and technical services focused on quality assurance. The contract is issued by the Department of Defense through the Defense Logistics Agency with a posting date of July 17, 2026, and is intended for performance in an unspecified location. Although the place of performance and point of contact details are not provided, the contract’s scope clearly emphasizes objective oversight and validation activities critical to maintaining defense supply chain integrity. There is no mention of set-aside status, and the agreement operates under the standard framework for government subcontracting without specific geographic or demographic restrictions indicated.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires the performance of final quality inspections and support for Defense Contract Management Agency acceptance, ensuring that all deliverables meet stringent government standards. This includes the use of calibrated equipment to verify compliance with technical specifications and the systematic reporting of any non-conformances to facilitate timely resolution and documentation. The work is critical to securing official government acceptance of products or systems under the subcontract. This subcontract is issued under the North American Industry Classification System code 541330, indicating it falls within the category of engineering services, and is associated with the Defense Logistics Agency, a component of the Department of Defense. Although specific location details are not provided, the performance location and agency oversight suggest operations tied to defense supply chain quality assurance. The contract was posted on July 17, 2026, and can be accessed via the DIBBS system under the referenced contract number.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Health And Human Services → Great Plains Area Indian Health Svc

Same awarding agency

System Optimization and Consultant Services

Computer Systems Design Services

POSTED

DEADLINE

24/7 Technical Support and Help Desk Services

Other Computer Related Services

POSTED

DEADLINE

Software Licensing and Maintenance for System M32 and EORDER

Software Publishers

POSTED

DEADLINE

Pre-Solicitation Notice - Facility Laundry Services at the Woodrow Wilson Keeble Memorial Health Care Center, Sisseton, SD.

Drycleaning and Laundry Services (except Coin-Operated)

POSTED

DEADLINE

Source Sought Seeking IEE and/or ISBEE Contractors to Provide System M32–Materials Management-Software, License & Technical Support at IHS Lower Brule Health Center Lower Brule, SD

Software Publishers

POSTED

DEADLINE

Post-Installation Service and Warranty SupportThe contract titled Post-Installation Service and Warranty Support is a subcontract issued under the Indian Small Business Economic Enterprise (ISBEE) Set-Aside program, specifically designated for the Department of Health and Human Services through the Great Plains Area Indian Health Service. It seeks providers to deliver comprehensive warranty and ongoing service support, including remote diagnostics, on-site repairs, parts replacement, and detailed service reporting for equipment or systems installed under prior agreements. The work is to be performed in Kyle, and the opportunity is restricted to qualified Indian small businesses as defined by the set-aside criteria, ensuring preferential consideration for entities that meet the ISBEE status requirements under federal guidance tied to the Department of the Interior and Indian Health Services. The solicitation was posted on July 9, 2026, and responses must be submitted by July 27, 2026, at 9:00 PM Eastern Time. The contract falls under NAICS code 811211, indicating it relates to electronic and appliance repair and maintenance services. The performance location is fixed in Kyle, with no additional details provided regarding the office address or point of contact. Interested vendors must ensure compliance with ISBEE certification and be prepared to meet the full scope of service obligations, including rapid response for diagnostics and repairs, availability of calibrated replacement parts, and accurate documentation of all service activities through formal reporting. The opportunity remains accessible through the SAM.gov platform under the provided link.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Onsite Clinical Training for Medical StaffThe contract is for onsite clinical training of medical personnel focused on the operation of ultrasound equipment, including software functionality, image acquisition techniques, and fundamental troubleshooting procedures. Training will be hands-on and require documented attendance and verification of participant proficiency to ensure competency. The effort is structured as a subcontract under an Indian Small Business Economic Enterprise (ISBEE) Set-Aside, specifically designated for the Department of the Interior and Indian Health Services, with the NAICS code 611519 indicating it falls under Other Educational Services. Performance will take place in Kyle, and the solicitation was posted on July 9, 2026, with responses due by July 27, 2026. The contracting activity is managed by the Great Plains Area Indian Health Service under the Department of Health and Human Services.

Other Technical and Trade Schools

POSTED

DEADLINE

Ultrasound System Supply (OEM or Authorized Distributor)The contract is for the supply of a brand new, non-refurbished diagnostic ultrasound system, specifically the GE LOGIQ E10 or an equivalent model, encompassing the full console, compatible transducers, necessary software packages, all required accessories, and complete documentation. This procurement is structured as a subcontract under an Indian Small Business Economic Enterprise set-aside, reserved exclusively for qualified Indian-owned small businesses, and is administered by the Great Plains Area Indian Health Service under the Department of Health and Human Services. The system must be provided in its original factory condition, fully functional and compliant with all technical and regulatory standards for medical diagnostic equipment. Performance of this contract is required to be fulfilled for the Kyle location, with all equipment delivered and installed according to specifications. The solicitation is open to eligible small businesses certified under the ISBEE program, and responses must be submitted by July 27, 2026. The NAICS code 334510 identifies this as a medical equipment manufacturing opportunity, indicating the need for direct vendor or authorized distributor involvement. All components must be new, unopened, and supported by full manufacturer warranties and compliance certifications, ensuring seamless integration into clinical workflows within the Indian Health Service network.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Warranty and Repair Service SupportThe contract provides a two-year warranty and repair service support for six Midmark dental X-ray units, encompassing preventive maintenance, troubleshooting, and all necessary repair services to ensure uninterrupted operational functionality. This includes routine inspections, part replacements, and technical support to maintain compliance with performance standards throughout the term. Services are expected to be delivered at the place of performance in Sisseton, with all work subject to the contract’s specified timelines and quality requirements. This is a sole-source subcontract under a Total Small Business Set-Aside, classified under NAICS code 811212 for medical and dental equipment repair and maintenance, awarded by the Great Plains Area Indian Health Service under the Department of Health and Human Services. The opportunity was posted on July 9, 2026, with a response deadline of July 24, 2026, and is restricted to small business concerns as defined by the SBA, ensuring economic participation aligns with federal small business goals. The contract does not specify a point of contact, and all inquiries must be directed through the official SAM.gov portal.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Installation, Training, and Documentation ServicesThe contract requires the on-site installation, calibration, and user training for six dental X-ray units, along with the submission of complete operator and service manuals to ensure full operational capability. All services must be performed at the designated location in Sisseton, with the contractor responsible for delivering technical expertise that meets established standards for safety, accuracy, and compliance. Training must be tailored to end users to guarantee proper handling and maintenance of the equipment, and all documentation must be submitted in finalized form upon completion. This is a subcontract classified as a Total Small Business Set-Aside under the NAICS code 541330, reserved exclusively for small business concerns as defined by the SBA. The opportunity was posted on July 9, 2026, with a strict response deadline of July 24, 2026, and is managed by the Great Plains Area Indian Health Service under the Department of Health and Human Services. Bidders must be prepared to meet all federal requirements for small business eligibility and be capable of executing the full scope of work on-site within the specified timeframe.

Engineering Services

POSTED

DEADLINE

Supply of New Intraoral X-Ray UnitsThe contract is for the procurement and delivery of six Midmark Preva DC Intraoral X-ray units with precise technical specifications, ensuring compatibility and performance standards required for clinical use. Each unit comes with a comprehensive two-year warranty to guarantee reliability and support after installation. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the FAR, promoting economic opportunity within that sector. The North American Industry Classification System code is 339114, which classifies the contract within the Medical Equipment and Supplies Manufacturing category. The purchasing agency is the Great Plains Area Indian Health Service under the Department of Health and Human Services, with performance required in Sisseton. The response deadline for submissions is July 24, 2026, and the opportunity was posted on July 9, 2026, providing potential vendors with a 15-day window to prepare and submit proposals.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Sisseton Oral XrayThe Great Plains Area Indian Health Service is conducting market research through a Sources Sought notice to evaluate the availability of qualified small businesses, including Indian Small Business Economic Enterprises, Indian Economic Enterprises, 8(a), HUBZone, Service-Disabled Veteran-Owned Small Businesses, and Women-Owned Small Businesses, capable of supplying new intraoral X-ray units for the Sisseton IHS facility in South Dakota. This is not a solicitation or binding commitment, and no contract will result directly from this notice; it is solely intended to determine if a small business set-aside is feasible under NAICS code 339114 for a future Firm-Fixed-Price acquisition. Respondents must submit a capability statement by July 24, 2026, via email, including company details, Unique Entity ID, business size classification, a narrative of current capacity and past performance on similar government or commercial contracts, and proof of SAM registration, with all submissions limited to ten single-spaced pages in 12-point font. The anticipated delivery timeline requires units to be delivered within 120 days of contract award, with performance occurring at the Sisseton IHS location during standard business hours. The contract will require the delivery of at least one operator manual and one service manual in either digital or physical format, along with a two-year warranty. Payments will be processed through the HHS Invoice Processing Platform upon successful delivery and inspection, in accordance with the Prompt Payment Act, and must include complete documentation referenced to the future contract number. No reimbursement will be provided for preparation or submission costs, and responses will not be acknowledged or evaluated for feedback. The government retains full rights to use submitted information and will not issue an award based on these responses. If the market research indicates sufficient qualified small business availability, a formal Request for Quote may be issued, but this sources sought notice carries no financial obligation or guarantee of future procurement.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE