Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

T-HANDLE OBSTRUCTIO

Active
SPE7L7-26-T-4355Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a T-HANDLE OBSTRUCTION REMOVER with NSN 1005-01-512-4361 and part number IP-555-5, under solicitation SPE7L7-26-T-4355. A total of 39 units are required at a unit price of $39.00, resulting in a total contract value of $1,521.00, with delivery mandated FOB origin within 282 days of the contract award. The product must be packaged in compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements which override any conflicting standards. Palletization must follow RP001 DLA Packaging Requirements, and all items must be marked and labeled as specified. The government has explicitly designated surplus as unacceptable for this NSN, and demilitarization procedures for Category I munitions items apply. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination, and delivery must be coordinated via the specified DLA distribution facility in New Cumberland, Pennsylvania. The required ship date is May 6, 2027, with no variance allowed in quantity. The contract is governed by DLA acquisition rules, with the applicable revision of the Master List determined by the solicitation issue date.

General Info

39 T-HANDLE OBSTRUCTION REMovers at $39 each, FOB origin, delivery by May 6, 2027, DLA packaging and CMMC Level 2 required.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L7-26-T-4355 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Charles Duncan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
T-HANDLE OBSTRUCTIO
T-HANDLE OBSTRUCTION REMOVER.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
OTIS PRODUCTS, INC. 01VS3 P/N IP-555-5
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528462 0001 EA 39.000
NSN/MATERIAL:1005015124361
DELIVERY (IN DAYS):0282
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7L7-26-T-4355
SECTION B
PR: 7017528462 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/06/2027 Original Required Delivery Date:05/06/2027
SPE7L7-26-T-4355 NSN/Part Number: 1005-01-512-4361 Quantity: 39 EA Purchase Request: 7017528462QTY: 39 Delivery: 282 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
GUIDE, CARTRIDGE, AMMThe contract requires the delivery of eight cartridge guides, identified by NSN 1005-01-498-5154, under solicitation SPE7M0-26-T-020A, with a mandatory delivery deadline of five days after order date. The item is classified under a military procurement governed by stringent technical and quality standards referenced from the DLA Master List, and is subject to specific requirements including demilitarization protocols for Category I munitions, DLA packaging guidelines, and tailored quality controls applicable to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors holding approved U.S./Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire requirements. The solicitation is issued by the Department of Defense’s Maritime Supply Chain ESOB unit, with performance location in Everett, Washington, and the contractor must be certified at CMMC Level 2 as a third-party assessment organization. All data handling, distribution, and compliance obligations must adhere strictly to DLA export control policies and cybersecurity maturity requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
LEVEL, PRECISION, VERTICThe contract solicitation SPE7L4-26-T-5635, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, seeks two units of a Level, Precision, Vertical Mount with NSN 1005-01-191-8884 for delivery to Redstone Arsenal, Alabama, within 20 days of order placement. The item is subject to stringent technical and quality requirements referenced through RQ and RD identifiers tied to the DLA Master List of Technical and Quality Requirements, including inspection and acceptance at the manufacturer’s origin, physical bare item marking, removal of government identification from non-accepted supplies, and configuration change management. The contract mandates compliance with DLA Packaging Requirements (RP001), ASTM D3951 for packaging, and MIL-STD-129 for labeling and barcoding, including GS1-128 and Data Matrix codes. Export control provisions under ITAR and EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program certification, completion of DLA export training, and formal DLA authorization. The contract includes a fixed-price structure with terms governed by FAR and DFARS clauses covering employment equity, trafficking prevention, cybersecurity safeguards, sustainable products, hazardous material handling per OSHA and MIL-STD-129, and NIST SP 800-171 DOD assessment requirements. Inspection is conducted at the origin by the government’s Quality Assurance Representative, with Product Verification Testing requiring five samples per subcontractor, one of which may be destroyed. The contractor must flow down all applicable requirements to subcontractors, including hazardous material labeling and export control obligations. Invoices must be submitted exclusively through Wide Area Workflow, and all entities must provide Unique Entity Identifiers and CAGE codes. While pricing is unlisted, the delivery window is fixed, with FOB Origin terms transferring title and risk upon shipment from the contractor’s facility, and no contract type or value is formally stated. The solicitation window closed on July 27, 2026, and proposals were submitted electronically via the DIBBS portal under the DLA Master Solicitation guidelines.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOV
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
HEAD, REPLENISHER CYLINThe contract pertains to the procurement of 12 units of HEAD, REPLENISHER CYLINDER with NSN/Part Number 1015-00-532-3861 under solicitation SPE7L7-26-T-4309, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on July 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling for this simplified acquisition. The item is classified as a Category I munitions component under demilitarization guidelines, requiring strict handling and disposal protocols. Cybersecurity compliance is mandatory at CMMC Level 2, verified through certification by an approved third-party assessment organization. Packaging must adhere to DLA-specified standards, and the supplier must comply with tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposal or variance requests, and inspection and acceptance occur at the manufacturer’s origin. The item is not subject to Item Unique Identification per the requesting service’s direction, though physical marking on the bare item is required. Export control is strictly enforced under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the U.S., and requiring prior authorization from the Department of State or Commerce. Access to controlled technical data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training and DLA questionnaire approvals. All subcontractors and foreign subsidiaries are bound by these restrictions. The point of contact for inquiries is Charles Duncan of the Defense Logistics Agency, and the place of performance is unspecified but within the United States.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
BRACKET PULLEY SUPPORT
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
PIN, GROOVED, HEADLES
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
ANODE, CORROSION PRE
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
Federal
Solicitation: Pintle Mount Assembly (NSN: 1005-01-461-2656) - AmendedThis procurement is for a five-year Firm-Fixed-Price Indefinite-Delivery Indefinite-Quantity contract to supply the Pintle Mount Assembly (NSN: 1005-01-461-2656, Part Number: 12986102) under a sole-source 8(a) competition, with a five-year minimum obligation of 144 units and a maximum potential volume of 3,600 units across five ordering years, each estimated at 576 units. The contract is administered by the Army Contracting Command - Detroit Arsenal and will be performed at Anniston Army Depot, Alabama, with all deliveries FOB destination and transportation costs borne by the contractor. Bidders must possess prior access to the Technical Data Package (TDP), designated as Distribution Statement D, which contains critical specifications and is accessible only to Department of War and authorized U.S. DoD contractors via SAM.gov; failure to obtain TDP access will result in bid rejection. All bids must be submitted electronically by 1:00 p.m. local time on July 27, 2026, via email under 10 megabytes, and must include completed fill-ins across Sections B, E, F, and K, including unit pricing for CLINs 0011 through 0016, with CLIN 0016 requiring a dollar amount even if requesting a first article waiver. The government will award to the lowest-priced responsive and responsible bidder without negotiation, evaluating solely on offered unit prices for the line items. The contract imposes stringent technical, compliance, and administrative requirements. All items must comply with MIL-STD-2073-1 and MIL-STD-129 for packaging and marking, including Unique Item Identification (UID) per MIL-STD-130, with machine-readable verification required. Wood packaging must meet ISPM 15 and DOD 4140.65-M standards. Contractors must adhere to Controlled Unclassified Information (CUI) protocols, complete mandatory DoD CUI training, enforce CUI Non-Disclosure Agreements, and safeguard CUI in locked facilities. Cybersecurity obligations include compliance with DFARS 252.204-7019 and NIST SP 800-171 requirements, and all personnel with security clearances must undergo annual TARP training. Inspection and acceptance occur at origin
W6QK Acc- Dta

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
Federal
Equilibrator, CannonThis solicitation, numbered SPRDL1-26-R-0088, is a firm fixed price contract issued by the Defense Logistics Agency Land Warren for the procurement of 25 Equilibrators, Cannon (NSN 1025-01-312-1014, Part Number 12576115), with an option to purchase up to an additional 25 units. The procurement is a 100% small business set-aside under FAR 19.5, meaning only certified small business concerns are eligible to submit offers. The contract requires strict adherence to military packaging standards, including MIL-STD-2073-1 and Special Packaging Instruction AM12576115 Rev C, with Level B packaging, military preservation, and full compliance with MIL-STD-129 for marking, including barcoding, Military Shipment Labels, shelf-life indicators, and structural markings. All unit packages and palletized loads must meet dimensional and load stability requirements, and wood packaging must be heat-treated with an approved IPPC mark. Unique Item Identification (UII) is required and must be 2D barcoded in compliance with MIL-STD-130, verified through automatic identification technology. Delivery is FOB Destination to the Central Receiving Point in Anniston, AL, with acceptance occurring at the contractor’s origin facility. The contractor must provide a First Article Test Report and conform to quality standards including ISO 9001:2015 and MIL-STD-1916 for inspection and acceptance, with Verification Level IV for major characteristics and Level II for minor characteristics. The Technical Data Package (TDP) is export-controlled and accessible only to the designated Data Custodian under the U.S./Canada Joint Certification Program. Invoicing must occur via WAWF, and contractors are prohibited from seeking reimbursement for new facilities, tooling, or test equipment—all such costs must be included in the fixed price. CMMC Level 2 certification is required for handling controlled unclassified information, and the use of ozone-depleting substances is strictly regulated. The solicitation closes on July 23, 2026, and proposals must be submitted electronically through the designated portal with the cost proposal in Excel format. All offerors must maintain current, accurate representations in SAM.gov, including UEI, CAGE code, and small business status, and must comply with all FAR clauses listed, including
DLA Land Warren

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
Synopsis / Solicitation for CHUTE ASSY, FLEX FEED, M240, NSN: 1005-01-172-3038The U.S. Army Contracting Command - Detroit Arsenal is issuing a sole source, five-year firm-fixed price requirements contract to Standard Armament Inc. (SAI) Industries for the supply of CHUTE ASSY, FLEX FEED, M240, identified by NSN 1005-01-172-3038 and Government Part Number 12323398-1, with a maximum quantity of 625 units over the contract period. Deliveries are structured in annual increments of 125 units beginning 100 days after receipt of order, with shipments delivered at a rate of 25 units every thirty days to the final destination in Texarkana, TX. The contract is governed by a strict FOB Destination delivery term, and all items must be preserved and packaged in accordance with MIL-STD-2073-1 and the referenced Special Packaging Instruction SPI 12323398, Rev A, with military-level preservation and Level-B packaging. Unit packages must be marked per MIL-STD-129, including barcoding and MSL labels, and all wood packaging must meet heat treatment standards of 56°C for a minimum of 30 minutes. Inspection and acceptance of supplies occur at origin, while first article test reports are accepted at destination, with the contractor responsible for maintaining and making available all technical data, engineering exceptions, and subcontractor documentation for government review. The technical data package (TDP) essential for manufacturing is classified as export-controlled under Distribution D and subject to the United States/Canada Joint Certification Program; only companies certified under this program may access it. The TDP is provided through the System for Award Management and is restricted solely to SAI Industries. Contractors must comply with ISO 9001:2015 quality standards tailored to exclude paragraph 8.3, with flow-down obligations to all subcontracts involving critical or complex elements. All proposals must be submitted electronically by email to the specified contract specialist, adhering to strict formatting, file naming, and size limitations, and must remain valid for 120 days. Proposals are evaluated solely on price under a lowest evaluated offer model, with mandatory pass/fail gates requiring full compliance with technical requirements and contractor responsibility under FAR 9.104. Invoicing and receiving reports must be processed through Wide Area WorkFlow, and all contract terms incorporate federal acquisition regulation clauses including Prompt Payment, Assignment
W6QK Acc- Dta

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
Federal
RECEIVER, UPPER - M4/M4A1
W6QK Acc- Dta

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
Federal
10--TRANSFER UNIT,AMMUNITI
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
PARTS KIT, DIAPHRAGM REThe contract specifies the procurement of a Parts Kit, Diaphragm Replacement, with a quantity of six units under the NSN 4820-01-673-8665 and part number 9910-KIT1721, issued by the DLA New Cumberland Facility under solicitation SPE7MC-26-T-139P. The delivery is set for 163 days after order placement, with an original required delivery date of October 14, 2026, and a need ship date of January 7, 2027. All items must be shipped FOB origin to the designated delivery point at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E, including Appendix D for kits, and palletization must meet DLA’s RP001 requirements. Preservation and packaging data fields are coded as ZZ or Z where applicable, indicating contractual or custom specifications. Marking requirements follow MIL-STD-129, mandating barcoding and labeling, including a special marking code of ZZ for unique contract requirements. Hazardous materials, if any, must comply with OSHA’s Hazard Communication Standard and require pre-award submission of Safety Data Sheets, with labeling also meeting MIL-STD-129. Clause 52.223-3 includes a fill-in table for hazardous material identification, while 252.223-7001 reinforces labeling obligations. The contract employs a fixed-price structure with a 0% variance on quantity. The solicitation references compliance with FAR and DFARS clauses related to cybersecurity, trafficking, employment verification, sustainable products, and contractor reporting of cyber incidents. The Unique Entity Identifier and CAGE code are required for representation, and the offeror must confirm small business status, though no socioeconomic set-aside is specified. Payment is to be processed via Wide Area WorkFlow, and the contract includes clauses for contractor accountability, whistleblower rights, and limitation on use of third-party cyber incident data. No pricing details are present in the available data, and the contract value remains undefined. No attachments or formal evaluation factors are provided in the solicitation package, and no Contracting Officer’s Representative or technical point of contact is named, with
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
COOLER UNIT, AIRThe contract specifies the procurement of six air cooler units identified by NSN 4130-01-372-2898 and part number H-4 LVR-4.0KW from ENGINEERED COIL COMPANY, with a total contract value of $6.00 per unit, totaling $36.00. Delivery is required FOB origin within 163 days of the contract award, with no tolerance for quantity variance. All supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific packaging methods, containment materials, and unit packaging codes. The units must be delivered to the DDSP New Cumberland Facility in New Cumberland, PA, with parcel post and freight shipping addresses identical. The contract prohibits intentional addition of mercury or mercury-containing compounds to the hardware, except for functional use in batteries, fluorescent lamps, sensors, controls, weapon systems, or specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List referenced in the contract, and the revision in effect at the solicitation or award date controls based on acquisition size. The required delivery date is March 28, 2027, with a needed ship date of January 18, 2027, under solicitation SPE8E8-26-T-4860, governed by NAICS code 333415 and managed by the Department of Defense through the DLA. Inspection and acceptance occur at the destination, and transportation logistics follow DLAD procedural notes C19 and C20.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
BORESCOPE KITThe contract is for the procurement of a Boreoscope Kit under solicitation SPE7L7-26-T-4323, awarded as a Service-Disabled Veteran-Owned Small Business Set-Aside, with a required delivery of five units within 70 days under FOB Origin terms. Each unit is identified by NSN 6650-01-590-6625 and must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging and labeling must comply with MIL-STD-129, while materials not classified as hazardous under FED-STD-313 must be commercially packaged according to ASTM D3951—unless superseded by stricter DLA Master List of Technical and Quality Requirements. Sampling procedures follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels or AQLs accordingly. Physical identification of the item must include specific part numbers tied to approved vendors, Optim LLC and Seneca Enterprises LLC, and all packaging must adhere to DLA’s RP001 packaging standards, including proper palletization and unit of issue compliance. The original required delivery date is February 5, 2027, with an earlier ship date of October 6, 2026, and transportation logistics must follow DLAD Proc Notes C19 and C20.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, OXYGEThe contract specifies the procurement of 50 units of a regulating valve for oxygen system pressure, identified by NSN 4820017357588 and part number 0799-1848 from ESAB NORTH AMERICA INC, under solicitation SPE7MC-26-T-140C. This is a total small business set-aside contract with a NAICS code of 332911, requiring delivery by March 6, 2027, 221 days from the award date, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DDSP New Cumberland Facility in Pennsylvania, and all items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and hazardous material labeling. The valve must be preserved using method AE with no preservation material, packed in unit container D3 and intermediate container E5, palletized per DLA’s RP001 requirements, and marked with no special markings. Strict environmental restrictions prohibit the intentional use or incorporation of ozone-depleting chemicals and mercury or mercury-containing compounds, except for limited exempted applications such as batteries, sensors, and certain instruments as defined by NAVSEA 5100-003D, which also mandates secondary containment for portable fluorescent lamps and instruments containing mercury. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, and all work must meet applicable federal specifications and regulations, including the Hazard Communication Standard and sustainable product guidelines. The contract incorporates multiple FAR and DFARS clauses covering employment equity, trafficking in persons, hazardous materials identification, cybersecurity safeguards for covered defense information, whistleblower rights, electronic payment via WAWF, accelerated payments to small business subcontractors, and prohibitions on certain foreign-sourced equipment. Offerors must maintain an active UEI and CAGE code, represent their size status accurately in SAM.gov, and submit proposals exclusively through the DIBBS portal by the deadline of July 30, 2026. No contract value is specified in the pricing section, as the unit price field is incomplete or placeholder, and no option quantities or additional CLINs are provided, leaving the total contract value undefined.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 323111
New
DIBBS
BOOK, LOGThe contract is for the procurement of 621 units of a BOOK, LOG identified by NSN 7690-01-707-6464, solicited under reference number SPE8E6-26-T-3587 by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 6, 2026, with a response deadline of July 17, 2026, indicating a ten-day window for vendor submissions. This is a federal procurement action with no set-aside category specified, meaning it is open to all qualified bidders without restriction based on business size or veteran status. The place of performance and point of contact information are not provided, but the contract falls under the broader scope of U.S. federal government logistics operations. The official solicitation details can be accessed through the DIBBS system via the provided UI link.
Commercial Printing (except Screen and Books)

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
REMOTE ASSY
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLYThe contract solicitation SPE7L7-26-T-4340 is for the procurement of a single POWER SUPPLY with NSN 6130011207600 under a Total Small Business Set-Aside, with NAICS code 335311, requiring delivery of one unit to the DDSP NEW CUMBERLAND FACILITY in New Cumberland, Pennsylvania, with a required delivery date of 161 days after award, or by May 23, 2027. The contract specifies FOB Origin terms and mandates zero variance in quantity. The supplier must comply with stringent technical and quality requirements from the DLA Master List, including adherence to MIL-STD-129 for packaging marking and labeling, ASTM D3951 for packaging, and RP001 for palletization standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and unspecified attributes are treated as major. All government identifiers must be removed from non-accepted supplies, and physical item marking must conform to the specified part numbers and manufacturers. The contract includes strict cybersecurity requirements, mandating CMMC Level 2 self-assessment and compliance with NIST SP 800-171 DOD assessment standards, as well as handling of Covered Defense Information. Hazardous materials must be labeled per 29 CFR 1910.1200 and MIL-STD-129, and radioactive materials exceeding 0.002 microcuries per gram require additional notification and labeling. The supplier must be registered in WAWF for invoicing, and payment will be processed via electronic submission only. Compliance with FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, accelerated payments to small business subcontractors, and whistleblower protections is required. The contractor must affirm representation as a small business in SAM.gov and adhere to affiliation rules and size standards. Transportation by sea must comply with U.S.-flag vessel requirements, and all contractual obligations are governed by deviations referenced under DFARS provisions including subcontracting, safety notifications, and compensation of former DoD officials. The contract does not specify unit pricing, and the final contract type is not explicitly stated but inferred to be fixed-price based on clause references.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RESTRICTOR CHThe contract pertains to the procurement of a valve, restrictor check, identified by part number 33-261503 and NSN 4820-01-730-3757, with a total quantity of 27 units priced at $27.00 each, for a total value of $729.00. The delivery is required within 100 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including adherence to MIL-STD-129 for marking and labeling. Palletization must conform to DLA packaging requirements. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a need ship date of May 19, 2026, and original required delivery date of July 12, 2026. Transportation instructions reference DLAD procedural notes C19 and C20. This solicitation is issued under contract number SPE7MC-26-T-137E as a total small business set-aside under NAICS code 332911, with a response deadline of July 27, 2026. All technical and quality requirements referenced in the DLA Master List, identified by R or I numbers, are incorporated by reference and govern the specifications. The unit of issue is each, and the contract aligns with DoD procurement standards. The primary point of contact is Benjamin Nevitt, with provided phone and email for inquiries. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility and is accessible via the DIBBS system.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of five regulating valves for fluid pressure, each with a 1-1/4 inch size, designed for use with salt water at a maximum pressure rating of 250 psi and an outlet pressure range of 25 to 60 psi. All materials must be mercury-free except for seat rings, which are exclusively permitted to be manufactured from Monel alloy QQ-N-281 Class A or Nickel-Copper-Silicon alloy ASTM A494/A494M M25S. The valves must be produced using a metal casting process requiring specialized tooling, and compliance with the latest revision of Federal Specification MIL-V-3 is mandatory for preservation and packaging. Packaging requirements follow MIL-STD-2073-1E, with preservation method code ZZ requiring Level A preservation as defined in the commodity specification, and marking must conform to MIL-STD-129 with no special markings required. The product is designated by NSN 4820-01-313-7667 and must be delivered FOB origin to the DLA Distribution facility at DDSP New Cumberland, PA, within 104 days after order placement, with a required ship date of February 4, 2025. No quantity variance is permitted. The contract prohibits the intentional use of mercury or mercury-containing compounds unless functionally essential in batteries, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, in which case a second containment boundary is mandatory per NAVSEA 5100-003D. Ozone-depleting chemicals are banned, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets submitted pre-award. Radioactive materials exceeding specified thresholds require prior notification and labeling. The acquisition is a total small business set-aside under FAR 19.5, with NAICS code 332912. Payment must be submitted electronically via Wide Area WorkFlow, and the contractor is subject to multiple DFARS and FAR clauses including cybersecurity safeguards, combating trafficking in persons, employment eligibility verification, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The offeror must provide a Unique Entity ID and CAGE code and affirm small business status, including any applicable socioeconomic designations.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details