Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

T-Valve Installation for Future Maintenance Access

Active

Federal

Response Deadline08/31/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A subcontract has been issued under a Small Business Set Aside for the installation of a 4-inch T-valve to enable temporary chiller connectivity during future maintenance or system outages. The work is scoped specifically to facilitate operational continuity by providing a dedicated connection point that can be utilized without disrupting existing systems. The solicitation was posted on August 6, 2026, with a response deadline of August 31, 2026, and is categorized under NAICS code 238220, indicating it falls within the plumbing, heating, and air-conditioning contracting sector. Performance of the contracted work is required at a location with a zip code of 67221, and the issuing agency is the Department of Defense through its W7M9 Uspfo Activity Ksang 184 office. This opportunity is reserved exclusively for small businesses, reinforcing the agency's commitment to supporting small business participation in defense-related infrastructure projects.

General Info

Small business subcontract to install 4-inch T-valve for chiller connectivity at 67221, DoD project.

Agency

Department Of Defense → W7M9 Uspfo Activity Ksang 184View Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

0, KS, 67221, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 02:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W7M9 Uspfo Activity Ksang 184

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W7M9 Uspfo Activity Ksang 184

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of a 4-inch T-valve to allow temporary chiller hook-up during future maintenance or outages.

Similar Contracts

Same NAICS industry code

Fire Alarm System Diagnostic and Repair ServicesALCORN STATE UNIVERSITY is seeking qualified contractors to provide comprehensive fire alarm system diagnostic and repair services across its campus facilities. The scope of work includes inspection, troubleshooting, repair, and routine maintenance of all fire alarm components such as control panels, smoke and heat detectors, manual pull stations, notification appliances, and associated electrical wiring. Contractors must be prepared to respond to system malfunctions, perform preventive maintenance, and ensure all equipment complies with applicable fire safety codes and standards. The contract is structured as a subcontract and is classified under NAICS code 238220 for electrical and other construction installation contractors. Solicitations are open with a response deadline of August 31, 2026, and the services are expected to be performed at various locations within the university’s campus in Mississippi.

ALCORN STATE UNIVERSITY

POSTED

about 11 hours ago

DEADLINE

Plumbing and Piping Systems Installation

California Department of Veterans Affairs

POSTED

about 12 hours ago

DEADLINE

HVAC System Installation

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 13 hours ago

DEADLINE

Plumbing and Piping Systems

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 13 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation is for fire extinguisher inspection and servicing services at the Excelsior Springs Job Corps Center in Missouri, issued as a subcontracting opportunity by Education & Training Resources. The contract requires quarterly inspections of 175 fire extinguishers across 22 campus buildings and center-owned vehicles, with replacement of used or uncharged units as needed. Each extinguisher must be tagged with an inspection label, and all work must comply with the current National Electrical Code and NFPA 101, Life Safety Code, along with applicable OSHA regulations and local, state, and federal building codes. The period of performance runs from October 1, 2026, through September 31, 2027, with services scheduled four times per year. Bids must be submitted by 12 p.m. CST on August 14, 2026, and must include a completed Bid Sheet with a detailed cost breakdown, Missouri-specific licensing, vendor acknowledgment form, Form W-9, FFATA Notice, Anti-Lobbying Certification, certificates of insurance, and a proposed service schedule. All responses are evaluated based on best overall value, not merely lowest price, and failure to meet any mandatory requirements will result in disqualification. The contract is set aside for small business concerns, including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses, under NAICS code 238220. The winning bidder must maintain an active SAM.gov registration with a Unique Entity ID and comply with federal labor standards including the Service Contract Act, Minimum Wage requirements under Executive Order 14026, and FAR-certified clauses regarding debarment, anti-lobbying, and information dissemination. Safety and conduct rules prohibit fraternization with students or staff, consumption of alcohol, drugs, tobacco, or firearms on-site, and require adherence to center security policies. Bonding is required based on contract value: a 100% payment bond for projects exceeding $35,000 but not surpassing $150,000, and both performance and payment bonds for contracts over $150,000. Insurance coverage for builders risk, automobile, liability, and workers compensation must be provided. Payment is due within 30 days of invoicing, and all deliverables are F.O.B. destination with final acceptance conducted by the center. Technical coordination is handled by William Boucher, while procurement inquiries should

ETR/Excelsior Springs Job Corps

POSTED

about 13 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and one new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires the installation of boilers with specified input and output capacities: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers and a 600,000 B.T.U. input, 572,000 B.T.U. output, 94% Energy Star-rated boiler for the administrative building. Commissioning of the boiler control systems by a qualified agent is mandatory, along with the submission of comprehensive documentation including inspection reports, test results, warranties, commissioning reports, and operations and maintenance manuals. All work must comply with applicable Kansas state codes including NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, and IECC, as well as EPA regulations such as 40CFR761 and 40 CFR 61 subpart M, and OSHA standards under 29CFR1926. The contractor must install preformed PVC pipe labels with flow direction indicators and is responsible for receiving, storing, and securing all materials and equipment on site. Performance must adhere to a 90-day total period with 60 days allocated to substantial completion and 30 days to contract close-out, with work to begin within fourteen days of the Notice to Proceed and fully completed within 120 calendar days. Substantial completion requires a formal walk-through with the Center’s authorized representative and the resolution of all punch list items, while final completion mandates submission of government inspection reports, manufacturer start-up checklists, and third-party water testing results. The contract mandates a Certificate of Liability Insurance naming the Center as both certificate holder and additional insured, compliance with the Davis-Bacon Act wage determinations, and proper licensing and permitting under Manhattan, Kansas regulations. The contractor must provide a ten-year warranty on boiler heat exchangers, a two-year warranty on all other parts, a one-year workmanship warranty, and a one-year preventive maintenance agreement for the Center’s use. Offerors must be certified small businesses under the SBA’s set-aside categories including SB, SDB,

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 13 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a AquaPlex Turbopower 96 hot water heater, Model #100L400A-TPX with Serial Number F008076, located in the Lincoln dormitory at the Keystone Job Corps Center in Drums, Pennsylvania. The scope of work includes replacing specific components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. Labor and materials must be itemized separately in all proposals, and the contractor is required to comply with Davis-Bacon wage standards and submit certified payroll records. All offerors must be registered and active on SAM.gov to be eligible. The solicitation is set aside exclusively for small business categories, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, under NAICS code 238220. The place of performance is clearly defined as Drums, Pennsylvania, but the period of performance, delivery schedule, FOB terms, and estimated contract value are not specified. No formal evaluation factors, weighting criteria, or award basis such as LPTA or best-value are provided. Proposal submission guidelines, including format, deadline, and submission portal, are not detailed in the available documentation, though the posted date is August 7, 2026, and the response deadline is August 14, 2026. The primary point of contact for inquiries is Jennie Drumheller, reachable via email and phone.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 13 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii, is a fixed-price, single lump sum contract structured under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business categories. Solicited under NAICS code 238220, the bid must be submitted via email by 3:00 PM HST on August 28, 2026, to Karllene Allen and Mila Handel, and requires compliance with detailed procedural and documentation standards including a fully completed MTC Bid for Lump Sum Contract form, signed by an authorized representative, along with a comprehensive cost breakout covering materials, labor, equipment, fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. Bidders must also complete and submit the MTC Supplier Packet, including Form W-9, Supplier Self-Certification, and Acceptance of Terms and Conditions, and provide three references for projects of comparable scope and value. A mandatory site visit with signature on an attendance roster is required prior to bid submission, emphasizing the importance of firsthand knowledge of the work conditions and constraints. The contract imposes strict compliance with federal and Department of Labor requirements, including adherence to Executive Order 13658 for the prevailing federal contractor minimum wage, submission of weekly certified payroll reports, and display of bilingual Davis-Bacon Act posters. Bids exceeding $25,000 must include a 20% bid bond, and upon award, performance and payment bonds equaling 100% of the contract value are required from an A-rated surety company approved by MTC. Insurance mandates include general liability coverage of $1 million per occurrence and $3 million aggregate with MTC listed as additional insured, auto liability of $1 million, worker’s compensation of at least $500,000, and professional liability coverage where applicable. Upon award, contractors must disclose any first-tier subcontractors with values over $30,000 and certify they are not debarred under FAR 52.209-6. Contractors must also submit Safety Data Sheets for all hazardous materials used, provide two complete operation and maintenance manuals, deliver at least two hours of on-site training for

Management & Training Corporation

POSTED

about 13 hours ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

This solicitation seeks bids to replace an existing oil-fired boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont, with a fully compliant, high-efficiency propane steam boiler system. The scope of work includes demolition and proper disposal of the current oil-fired boiler and blow down separator, installation of a new propane steam boiler and gas burner meeting FEMP JCH-814 efficiency standards, replacement of the duplex boiler feed tank and control panel, condensate tanks, steam traps, Y strainers, check valves, and condensate receivers, installation of new boiler feed water piping with a reduced pressure backflow preventer, insulation of all piping, modification of the existing stack, and full system testing including fuel/oxygen mix verification, water side cleaning, boiler skimming, and startup. All work must comply with the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electrical Code, NFPA Life Safety 101, and NFPA 58. The project requires the provision of a propane gas tank and all associated materials, with all items quoted F.O.B. destination and no additional charges for delivery, packing, or insurance accepted unless explicitly included and approved. The solicitation is open only to small business concerns as defined under the SBA’s set-aside programs, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must demonstrate active registration at SAM.gov with a Unique Entity ID, submit a completed Bid Sheet with detailed line-item pricing for equipment, materials, and labor, provide all required Vermont licensing and credentials, and include mandatory documentation such as Form W-9, Vendor Acknowledgement Form, FFATA Notice, Anti-Lobbying Certification if applicable, Certificates of Insurance listing ETR as certificate holder, and a proposed schedule of work. Bonding is required based on project cost: a 100% payment bond plus another form of payment protection for projects between $35,000 and $150,000, and both 100% performance and payment bonds for projects exceeding $150,000. Contractors must comply with the Davis-Bacon Act, Service Contract Act, and Executive Order 14026 minimum wage requirements, adhere to strict center security and conduct rules prohibiting fraternization with staff or students and the possession of alcohol, drugs,

Northlands Job Corps Center /ETR

POSTED

about 13 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

Management & Training Corporation (MTC) has issued RFQ#3857 Freezer Door Replacement as a subcontracting opportunity for the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, WV 25311. The solicitation seeks a qualified contractor to provide all labor, materials, equipment, transportation, supervision, and incidentals required to remove three existing walk-in refrigeration doors— one cooler and two freezers—and install new replacement doors complete with all associated hardware including hinges, latches, gaskets, closers, thresholds, and related accessories. The work must result in doors that align properly, provide an airtight seal, operate smoothly without binding, and be fully functional upon completion. All existing doors and debris must be removed and disposed of properly, and the contractor is required to provide manufacturer warranty documentation and maintenance recommendations. The contract is subject to the Service Contract Labor Standards under FAR 52.222-41 with a mandated wage determination WD#2015-4347 (Rev 29) dated July 8, 2025, requiring compliance with federal prevailing wage rates for service employees. The solicitation is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with eligibility based on the NAICS code 238220 and a size standard of $19 million in annual receipts. Bidders must self-certify their socioeconomic status and provide comprehensive documentation including a completed W-9, Self-Certification Form, Acceptance of Terms and Conditions, three references for similar projects, proof of insurance meeting minimums of $1 million per occurrence for general liability, $1 million for auto coverage, and $500,000 for workers’ compensation, and an insurance certificate naming MTC, DOL, and Charleston Job Corps as certificate holder and additional insured. First-tier subcontractors exceeding $30,000 must disclose any debarment or suspension status under FAR 52.209-6 and all contractors must comply with reporting executive compensation and first-tier subcontract awards under FAR 52.204-10. The contractor must also adhere to Department of Labor requirements including protection of personally identifiable information, mandatory training, records management, and immediate one-hour reporting of any data breach to DOL. All work must be performed on

Management & Training Corporation

POSTED

about 13 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract entails the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure compliance with the International Plumbing Code and safety standards. The awarded contractor must provide all labor, materials, equipment, supervision, and incidentals required to complete the work in full operating condition, with specific tasks including gas piping repairs at Building 305 involving isolation, pressure testing, and valve replacement; installation of backflow preventers at Buildings 607 and 701; and relocation of water piping away from electrical panels at Building 610. All work must include piping, fittings, supports, pressure and leak testing, and full restoration of affected areas. The contract is a fixed-price, single lump sum award with an estimated value not exceeding $25,000, and the contractor must achieve substantial completion within 60 consecutive business days after receiving a written Notice to Proceed, beginning work no later than five business days after the agreed start date. A mandatory pre-construction meeting is required upon issuance of the Notice to Proceed. The contractor must adhere to federal labor standards, including payment of the prevailing Federal Contractor Minimum Wage as required by Executive Order 13658, and submit certified payroll reports on a weekly basis. Compliance with FAR clauses such as 52.222-11 requires submission of the SF 1413 Statement and Acknowledgement form, regardless of contract value, while FAR 52.204-10 mandates reporting of executive compensation and first-tier subcontract awards if the contract value exceeds $40,000. The solicitation is set aside for small business entities, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, and all subcontractors must self-certify under NAICS code 238220. Required documentation includes a detailed bid breakout on company letterhead, completed MTC Supplier Packet containing Form W-9 and Self-Certification, three references for comparable projects, and compliance with insurance requirements including $1 million general liability coverage, $1 million auto liability, and $500,000 workers’ compensation. Contractors must also submit Safety Data Sheets for hazardous materials, verify underground utilities prior to excavation, and provide two hours of on-site training for facility personnel. Final acceptance requires a formal punch list process followed by a final inspection upon resolution of all deficiencies, with liquid

Earle C. Clements Job Corps Center

POSTED

about 13 hours ago

DEADLINE

Fiber Optic Cable Installation – Underground Conduit Pulling & Splicing

Texas Department of Transportation

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → W7M9 Uspfo Activity Ksang 184

Same awarding agency

Debris Hauling and Off-Site DisposalThe contract solicits services for the removal and disposal of an old chiller along with associated debris and construction waste to an approved off-base facility, ensuring all waste is handled in compliance with regulatory requirements. The contractor is responsible for providing tipping tickets and a cover letter to document theproper disposal of materials, maintaining a clear audit trail and accountability for waste handling. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, with the NAICS code 484220 reflecting that the work falls under the waste collection and transportation industry. The opportunity was posted on August 6, 2026, with responses due by August 31, 2026, at 2:00 PM, and the place of performance is located at a site with a zip code of 67221 under the purview of the Department of Defense, specifically the W7M9 Uspfo Activity Ksang 184. There is no designated point of contact listed, and while the exact city and state for the agency office are not provided, performance is required at the specified zip code. Potential applicants must meet small business criteria and be prepared to manage and document the entire removal and disposal process in accordance with federal guidelines and off-site disposal facility requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Concrete Pad Expansion and Site PreparationThe contract calls for the expansion and reinforcement of an existing 4000 psi concrete pad to adequately support a new chiller unit, requiring full site preparation that includes excavation, forming, concrete pouring, and proper curing procedures. The work is specifically focused on structural enhancement to ensure the pad can handle the load and operational demands of the new equipment, with all tasks executed to meet engineering and safety standards. The project is classified as a subcontract under the Small Business Set Aside category, reserved exclusively for small businesses, and is governed by the NAICS code 238990 for other specialty trade contractors. The solicitation was posted on August 6, 2026, with a response deadline of August 31, 2026, at 2:00 PM. Performance of the work is to take place at a location with a zip code of 67221, associated with the Department of Defense’s W7M9 Uspfo Activity Ksang 184. The contract does not specify a point of contact or detailed office address, and the place of performance is listed with only a city designation of “0,” suggesting the location may be a military or restricted site. All work must be completed in accordance with federal contracting requirements for defense-related infrastructure projects under the Small Business Set Aside provisions.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Electrical and Control System Integration (DDC)The contract entails the electrical connection of a chiller unit requiring a 460V power supply with 500 kcmil conductors, along with proper grounding and integration into the building’s Direct Digital Control system for comprehensive monitoring and automated operation. All work must adhere to technical specifications for power delivery, safety grounding, and seamless communication with the DDC network to ensure optimal performance and system interoperability. The scope is focused exclusively on the electrical and control integration aspects of the chiller installation, excluding broader mechanical or structural components. This subcontract is categorized under NAICS code 238210 for electrical contracting and is designated as a Small Business Set Aside, exclusively available to qualified small businesses. It was posted on August 6, 2026, with a response deadline of August 31, 2026, at 2:00 PM. Performance is required at a location with a zip code of 67221, under the oversight of the Department of Defense through the W7M9 Uspfo Activity Ksang 184 office. The contract is administered through the SAM.gov platform under a specific opportunity link, and all bidders must comply with federal subcontracting guidelines for small businesses.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical Installation and Piping IntegrationThe contract involves the installation of a new chiller system with full integration into existing building infrastructure, including the laying of 4-inch water piping connections, proper refrigerant line routing and connection, and comprehensive electrical grounding to ensure safe and compliant operation. All work must be performed in accordance with industry standards and must interface seamlessly with current mechanical and electrical systems without disrupting ongoing operations. The scope emphasizes precision in piping and refrigerant handling, as well as adherence to safety codes for electrical grounding. This is a Small Business Set Aside subcontract under NAICS code 238220, reserved exclusively for small businesses, and is managed by the Department of Defense through the W7M9 Uspfo Activity Ksang 184 office. The opportunity was posted on August 6, 2026, with a response deadline of August 31, 2026, at 2:00 PM. Performance is required at a location with a zip code of 67221, though the specific city and state are not provided. Bidders must be prepared to meet all technical and regulatory requirements for mechanical and piping integration within a federal facility under DoD oversight.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Chiller Removal and Decommissioning with Hazardous Material HandlingThe contract entails the safe removal and decommissioning of an existing 80-ton chiller, with full compliance to environmental regulations regarding the recovery and proper disposal of refrigerants and other hazardous materials. All work must be performed under strict safety and environmental protocols to ensure no contamination or regulatory violations occur during the process. This subcontract is designated as a Small Business Set Aside under the SBA, ensuring eligibility and opportunity for qualified small businesses. The North American Industry Classification System code is 562910, indicating the work falls under remediation and other waste management services. Performance is required at a location with a zip code of 67221, with the contracting activity under the Department of Defense through W7M9 Uspfo Activity Ksang 184. The solicitation was posted on August 6, 2026, and responses are due by August 31, 2026, at 2:00 PM.

Remediation Services

POSTED

DEADLINE

HVAC Chiller Unit Supply and Refrigerant ComplianceA new 80-ton Trane chiller unit with R-134A refrigerant or an approved equivalent must be supplied under this subcontract, with full manufacturer certification verifying refrigerant compliance and adherence to environmental handling standards. The contract is classified as a Small Business Set Aside under the SBA program with NAICS code 333415, designated for small business concerns, and is issued by the Department of Defense through the W7M9 Uspfo Activity Ksang 184. The place of performance is located in ZIP code 67221, and proposals must be submitted no later than August 31, 2026, at 2:00 PM EST, following the posting date of August 6, 2026. The procurement is exclusively available to small businesses and requires strict compliance with refrigerant specifications and environmental protocols.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Hazardous Materials ManagementThe contract titled Hazardous Materials Management pertains to the comprehensive handling, documentation, and regulatory compliance of hazardous materials under a subcontract awarded through a Small Business Set Aside. It requires strict adherence to HMMP §3.6.3 for obtaining and maintaining authorization to use HAZMAT, including the timely submission of Safety Data Sheets to ensure all materials are properly recorded and handled according to federal safety standards. The place of performance is located in an area with zip code 67221, and the contract is issued by the Department of Defense under the W7M9 Uspfo Activity Ksang 184 office, classified under NAICS code 562910 for hazardous waste collection and treatment services. All responses must be submitted by August 27, 2026, at 2:00 PM, with the solicitation posted on August 6, 2026. The contract is specifically reserved for small businesses, reinforcing the intent to support small business participation in defense-related environmental and safety operations. Compliance with all hazardous materials documentation protocols is mandatory, and failure to meet the specified regulatory requirements may result in disqualification or contract termination. The work entails ongoing management of material safety data, authorization tracking, and alignment with departmental safety mandates to ensure operational continuity and regulatory accountability.

Remediation Services

POSTED

DEADLINE

Lighting and Fixture InstallationThe contract involves the installation of light fixtures and switches in strict accordance with the architectural reflected ceiling plans, requiring prior verification of any discrepancies before the rough-in phase to ensure accuracy and compliance. All work must align precisely with the design specifications, with attention to detail during the initial setup to prevent costly revisions later. The solicitation is classified as a subcontract under a Small Business Set Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 238210 indicating electrical contracting services as the relevant industry classification. The contract was posted on August 6, 2026, with a response deadline of August 27, 2026, and is issued by the Department of Defense through the W7M9 Uspfo Activity Ksang 184 agency. The place of performance is located in Wichita, Kansas, with a zip code of 67221, and no specific point of contact is listed. Interested parties must submit their proposals by the stated deadline through the official SAM.gov portal, as this procurement is part of a broader federal initiative to support small business participation in defense-related construction projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical and Plumbing SystemsThe contract pertains to the installation of mechanical and plumbing systems using non-combustible piping materials, ensuring full compliance with architectural specifications and applicable safety standards. All work must adhere strictly to industry codes and regulations to guarantee durability, fire safety, and operational efficiency within the designated facility. The scope is limited to subcontracting opportunities and is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, reinforcing support for small business participation in federal contracting. The solicitation is associated with NAICS code 238220, reflecting specialized plumbing and mechanical contracting services, and is managed by the Department of Defense under the organizational designation W7M9 Uspfo Activity Ksang 184. Performance of the contract is required at a location with a zip code of 67221, though specific city and state details are not provided. The deadline for responses is August 27, 2026, at 2:00 PM, with the solicitation posted on August 6, 2026. Interested parties must submit proposals through the designated SAM.gov portal before the deadline to be considered for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems InstallationThe contract titled Electrical Systems Installation requires the installation of electrical conduit, outlet boxes, and associated systems using non-combustible materials in full compliance with the National Electrical Code standards. The work is classified as a subcontract under a Small Business Set Aside, meaning only eligible small businesses may bid, and it falls under NAICS code 238210 for electrical contracting. The solicitation was posted on August 6, 2026, with a firm deadline for responses on August 27, 2026, at 2:00 PM. Performance of the work is mandated to occur at a location with a zip code of 67221, and the contracting activity is under the Department of Defense, specifically the W7M9 Uspfo Activity Ksang 184. All materials and installations must meet rigorous safety and fire resistance requirements, ensuring long-term durability and regulatory adherence.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Drywall and Ceiling InstallationThe contract involves the installation of fire-rated drywall and ceiling systems incorporating T-rated sealants to ensure compliance with fire resistance requirements in rated and SIC walls and ceilings, preventing the passage of flames and hot gases. Work must be performed in strict accordance with applicable fire safety codes and standards to maintain the integrity of fire-rated assemblies. The solicitation is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may submit proposals, and the NAICS code 238310 applies to drywall and insulation contractors. The place of performance is identified with a zip code of 67221, though specific city and state details are not provided, and the contracting activity is listed as W7M9 Uspfo Activity Ksang 184 under the Department of Defense. Proposals must be submitted by the deadline of August 27, 2026, at 2:00 PM, with the opportunity posted on August 6, 2026, and the nature of the contract is classified as a subcontract.

Drywall and Insulation Contractors

POSTED

DEADLINE

Interior Demolition and RemediationThe contract involves the complete demolition and removal of damaged interior components in the B44 breakroom, specifically rooms 103 and 106, due to water damage, along with the proper disposal of all debris generated from the work. The project falls under the subcontract category with a Small Business Set Aside designation, ensuring eligibility and preference for small businesses as defined by the SBA. The work is classified under NAICS code 238990, which encompasses other specialty trade contractors, and is being managed by the Department of Defense through its W7M9 Uspfo Activity Ksang 184 office, with performance required at a location in ZIP code 67221. The solicitation was posted on August 6, 2026, and all responses must be submitted by 2:00 PM Eastern Time on August 27, 2026. The contract does not include detailed specifications for materials or methods beyond the scope of demolition and debris removal, leaving execution details to the qualified bidder.

All Other Specialty Trade Contractors

POSTED

DEADLINE