Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

TANK, FUEL, ENGINE

Active
SPE7L1-26-T-901QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a fuel tank for engine applications under solicitation SPE7L1-26-T-901Q, with the NSN 2910-01-727-2279 and part number 84577803, designated as a commercial off-the-shelf (COTS) item and identified as a critical application item. Four units are required to be delivered FOB origin within 142 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA packaging requirements, and special marking codes must be applied. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specification. Technical and quality requirements are governed by the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 31, 2026. The contract also incorporates provisions for covered defense information and references defined unit of issue standards through official DLA resources.

General Info

Four COTS fuel tanks, NSN 2910-01-727-2279, deliver FOB origin by Dec 31, 2026, to New Cumberland, PA, per MIL-STD packaging.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-901Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS

Full Description

Show more
TANK,FUEL,ENGINE
TANK,FUEL,ENGINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
CRITICAL APPLICATION ITEM
YAPP USA AUTOMOTIVE SYSTEMS INC 9FVH1 P/N 84577803
GENERAL MOTORS LLC 7X677 P/N 84860749
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 84577803 REVISION NR A DTD 03/25/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-26-T-901Q
SECTION B
PR: 7017698066 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017698066 0001 EA 4.000
NSN/MATERIAL:2910017272279
DELIVERY (IN DAYS):0142
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPI NUMBER: AK17272279 DATE: 03-25-2025 REV: A
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/31/2026 Original Required Delivery Date:12/31/2026
SPE7L1-26-T-901Q NSN/Part Number: 2910-01-727-2279 Quantity: 4 EA Purchase Request: 7017698066QTY: 4 Delivery: 142 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-Q-1404
This contract is for the procurement of an O-RING, identified as a commercial off-the-shelf item with the NSN 5331-01-670-1709 and part number specified in Technical Data Package Rev B Gen 2 under reference QAP 13873, effective as of January 14, 2025. The item is classified as a critical application item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including FAA bare item marking, preservation, packaging, and labeling standards. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring waterproof, greaseproof, opaque medium-duty bags to protect against UV degradation, with all units marked with NSN, contract number, lot number, and manufacturer and contractor cage codes. The contract prohibits surplus materials and mandates full compliance with MIL-STD-129 for marking and RP001 for packaging. The quantity required is ten units, subject to a firm fixed price with zero variance allowed on delivery quantity. Inspection and acceptance occur at destination, with delivery expected within 60 days after award. The item must be shipped via traceable freight to the designated Goldsboro, North Carolina address, with parcel post strictly prohibited. Sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Any unspecified attributes are treated as major. The contract also includes requirements for FAA airworthiness approval, hazardous materials handling per IP025, and adherence to DLA’s unit of issue standards. Delivery is tied to a government-provided material need date of November 5, 2025, with the solicitation issued under SPE7L1-26-Q-1404 and response deadline in August 2026.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING
Solicitation # SPE7L5-26-T-4711
The contract is for the procurement of three fuel metering pumps, identified by NSN 2910-01-689-0418 and part number 056761, under solicitation SPE7L5-26-T-4711. Delivery is required within 206 days with a specified ship date of March 5, 2027, and all items must be delivered FOB origin to the designated receiving warehouse in Tracy, California. The quantity is strictly fixed at three units with no variance permitted. Packaging and preservation must comply with the latest revision of MIL-P-16789 for pumps, and all packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization is governed by DLA packaging requirements, and the unit of issue is each. The technical and quality specifications referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Transportation logistics and delivery protocols are governed by specific DLA procedural notes C19 and C20. The contract is issued by the Department of Defense through Land Supplier Operations Engines, with the point of contact being Randy Ith at DLA. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and falls under NAICS code 336310 for engine and turbine manufacturing. The item is classified as a simplified acquisition, and the applicable revision of the DLA Master List is determined by the solicitation issue date. All supplies must be free of government identification if not accepted, and the entire procurement is subject to DLA’s standardized acquisition policies, including unit of issue alignment with ANSI X12 standards. The contract does not specify a set-aside type, indicating it is open to all eligible contractors without restriction.
LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332994
New
DIBBS
DIFFUSER ASSEMBLY
Solicitation # SPE7L1-26-T-896P
The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for eight diffuser assemblies identified by NSN 1005010299255 under solicitation number SPE7L126T896P. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the NAICS code 332994 indicating the appropriate industry classification. All responses must be submitted electronically via the SAM.gov portal, and hard copies of the solicitation are not available. The solicitation will be accessible online through the provided UI link, and digital drawings along with applicable military specifications and standards can be retrieved or ordered electronically. Deliveries are to be made to DLA Dist San Joaquin with a performance schedule of 359 days after delivery order award. The deadline for submitting quotes is August 10, 2026, and the solicitation was posted on July 30, 2026. Point of contact for questions is listed as DibbsBSM@dla.mil, with additional guidance directing interested parties to check Block 5 of the solicitation document via the Additional Information link or the DIBBS website using the solicitation number. The contracting office is located in Columbus, Ohio, and there is no specified place of performance beyond the delivery destination. Responsibility and timely electronic submission are mandatory for consideration, and all qualified SDVOSBs are encouraged to respond.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
COVER, THERMOSTATIC
Solicitation # SPE7L1-26-T-848Z
The contract pertains to the procurement of eight thermostatic covers with NSN 2815014860463 under solicitation SPE7L1-26-T-848Z, with a total contract value of $64.000 at a unit price of $8.000 per item. Delivery is required within five days of the award date, with FOB origin terms designating the contractor’s shipping point as the point of title and risk transfer, and the final delivery destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The item must conform to the DLA Master List of Technical and Quality Requirements referenced by RA001 and RP001, which govern packaging, preservation, and marking standards. Packaging must adhere to MIL-STD-2073-1E with a clean/dry preservation method, no additional preservation materials, and unit containers designated as E5 with intermediate containers labeled DO; palletization follows DLA’s RP001 guidelines. Labeling and marking must comply with MIL-STD-129, including mandatory UCC/ANSI 128 or GS1 DataBar barcode compliance, and no special markings beyond standard provisions are required. The product is strictly prohibited from containing intentionally added mercury or mercury compounds except for functional uses in batteries, sensors, or certain instruments as permitted under NAVSEA 5100-003D, requiring shock-proof construction and secondary containment for any portable mercury-containing devices. All supplies must be free of hexavalent chromium and comply with DFARS requirements for hazardous material identification, cybersecurity, and contractor information safeguarding, including adherence to NIST SP 800-171 and safeguarding covered defense information under 252.204-7012. The contract includes numerous FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cyber incident reporting, subcontracting, inspection, default, payment acceleration for small businesses, electronic invoicing via WAWF, and restrictions on acquisition of defense items from communist Chinese military companies. Inspection and acceptance occur at origin under FAR 52.246-2, with the government responsible for inspection. Contractors must hold a valid UEI and CAGE code and declare their size status, and any affirmative response regarding covered defense telecommunications equipment triggers additional disclosures. Submission is mandatory through the DLA Internet Bid Board System by July 3
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details