TAPE, FLAGGING

RIBBON,FLAGGING,SURVEYOR'S (HAZARDS) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 BX = 12 EA
This item is procured in accordance with a United States Department of Agriculture, Forest Service specification. These Specifications are located at: https://www.fs.usda.gov/t-d/programs/fire/specs.htm
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
NSN 9905-01-523-2324
NFES 0267
Unit of issue = BX (box containing twelve (12) rolls)
RIBBON, FLAGGING, SURVEYOR’S (HAZARDS): Shall be in accordance with the following characteristics:
The flagging shall be of polyvinyl chloride material, 2 mil thick minimum, 1-3/16 inch wide minimum, 300 feet long per roll minimum, black in color with yellow 1/2 inch diagonal stripes every 1/2 inch. The color shall not be colorfast and shall fade after extended exposure to sunlight, and the flagging shall remain flexible to -20 degrees Fahrenheit.
Workmanship # The ribbon shall be free of holes, dirt, ragged edges, discoloration, and be suitable for the purpose intended. No defects that affect appearance or serviceability shall be permitted.
PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14153 NFES0267-IPD-015232324 REVISION NR A DTD 05/18/2018 PART PIECE NUMBER:
SPE8E5-27-Q-0052
SECTION B
SUPPLY/SERVICE: 9905-01-523-2324 CONT'D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9905-01-523-2324 500.000 BX $ _______________ $ ______________ TAPE,FLAGGING
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:012 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPECIAL PACKAGING CODES Z/ZZ:
NFES NUMBER WILL BE ADDED TO THE LAST LINE OF THE MIL-STD-129 LABEL. EXAMPLE NFES 0267
SPECIAL MARKING shall include: 1) Lot Batch number. 2) Dates of manufacture and re-inspection 60 months after date of manufacture.
UNIT PACK: Twelve (12) rolls shall be packaged in a close-fitting fiberboard box.
EXTERIOR Container: Twelve boxes (144 rolls) shall be packed in a close-fitting corrugated fiberboard box, minimum burst strength 200 (minimum edge crush strength 32 lb per inch width), and shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification.
SUPPLEMENTAL PACKING AND PACKAGING REQUIREMENTS: All fiberboard boxes, cushioning, and dunnage used in packing and packaging of this item shall contain recovered materials in accordance with the EPA Comprehensive Procurement Guideline For Products Containing Recovered Materials (40 CFR 247) and the EPA Paper Products Recovered Materials Advisory Notice (Federal Register, Vol. 61, No. 104, May 29, 1996). The EPA's Recommended Recovered Fiber Content Levels for Paperboard and Packaging Products are available at http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm http://www.epa.gov/osw/conserve/tools/cpg/products/paperbrd.htm
UI=BX; BX=12
PARCEL POST ADDRESS:
SPE8E5-27-Q-0052
SECTION B
SUPPLY/SERVICE: 9905-01-523-2324 CONT'D
W62G2T
W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN RD REC WHSE 57 TRACY CA 95304-5000 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD 25600 S CHRISMAN RD REC WHSE 57 TRACY CA 95304-5000 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7018588503 0001 N/A N/A N/A 05/01/2027

SPE8E5-27-Q-0052 NSN/Part Number: 9905-01-523-2324 Quantity: 500 BX Purchase Request: 7018588503QTY: 500 Delivery: 60 days ADO