Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TAPE, INSULATION, ELECTR

Active
SPE7M2-26-T-5668Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Electrical insulation tape, 0.750 inches wide, 0.010 inches thick, and 108 feet long per roll, is being procured under solicitation SPE7M2-26-T-5668 for delivery to the Portsmouth Naval Shipyard in Kittery, Maine, with a firm delivery window of 20 days from award. The contract requires ten rolls, with each roll serving as the unit of issue, and the total estimated value is $397.50, though the unit price is inferred from prior awards rather than explicitly stated. The item is subject to strict technical and quality requirements defined by MIL-I-19166C, revision C dated February 26, 2021, and must conform to qualified products list QPL-19166-30, revision 30, dated January 16, 2009, meaning only approved manufacturers may supply the product. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special marking code 32 indicating a Type I, 12-month non-extendable shelf life, and labels must clearly display the part number 0.75” W, 1296” L, .010 THK in accordance with MIL-I-19166. The product must not contain or come into direct contact with mercury or mercury-containing compounds, except in exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA 5100-003D, with portable devices containing mercury required to have shockproof construction and secondary containment. Preservation is mandated as dry preservation (PRES MTHD:10) in a dry environment, with unit containers specified as corrugated fiberboard boxes, and palletization in compliance with DLA packaging requirements. The item is a critical application item, inspected and accepted at the destination with zero variance allowed in quantity. Cybersecurity requirements under DFARS 252.204-7012 and 252.240-7997 apply, mandating safeguarding of covered defense information and compliance with NIST SP 800-171 standards. Contractors must comply with anti-trafficking and employment eligibility verification regulations, hazard communication and safety data sheet requirements, and restrictions on compensation of

General Info

Electrical insulation tape, 0.750x0.010x108 ft/roll, 10 rolls, MIL-I-19166C compliant, QPL required, 12-month shelf life, no mercury, FOB origin, delivery in 20 days.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

BUILDING 170, KITTERY, ME, 03904-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5668 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TAPE,INSULATION,ELECTRICAL
INSULATION TAPE, ELECTRICAL
0.750 IN.W,0.010 IN.THK,108 FT.LG.
108 FEET PER ROLL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
1 RO = 108 FT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
PACKAGING LABEL SHALL MARKED WITH P/N 0.75” W; 1296” L; .010 THK IAW
SPEC MIL-I-19166.
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SPE7M2-26-T-5668
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-I-19166C(1) NOT 2 REVISION NR C DTD 02/26/2021 PART PIECE NUMBER: 0.750W 0.0100 THK
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-19166-30 NOT 1 REVISION NR 30 DTD 01/16/2009 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017505822 0001 RO 10.000
NSN/MATERIAL:5970008778591
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-00-877-8591 Quantity: 10 RO Purchase Request: 7017505822QTY: 10 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Power Supply Unit Manufacturing and SupplyThe contract solicits the manufacture and supply of two military-specification power supply units identified by NSN 6130015910869 and part numbers MT55E1210-1 and 109100, with the potential for additional units to be ordered under an indefinite delivery mechanism. These units must meet exacting military standards for performance, durability, and environmental resilience, ensuring compatibility with defense-grade systems. The submission deadline for responses is August 3, 2026, and the contract is classified as a subcontract under the NAICS code 335999, which covers other electrical equipment and component manufacturing. The awarding entity is the Strategic Acquisition Program Directorate within the Department of Defense, indicating the procurement is part of a broader defense infrastructure initiative. All work is expected to align with federal defense contracting requirements, and though the place of performance and point of contact details are not specified, the solicitation is accessible through the DIBBS platform for registered contractors.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
Defense Item Manufacturing & SupplyThe contract requires the manufacture and delivery of 46 units of a defense-related item identified by NSN 5975013028290, with strict adherence to technical specifications, packaging requirements, and cybersecurity standards to ensure operational readiness and data integrity. All units must comply with the Department of Defense’s procurement protocols and be delivered to the designated performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 335999, indicating it falls within the category of other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader oversight of the Department of Defense. Responses to this solicitation are due by July 27, 2026, at 5:00 PM, with the opportunity posted on July 19, 2026, providing vendors a limited window to prepare and submit compliant proposals. The procurement does not specify a set-aside type, meaning it is open to all qualified contractors without preference for small businesses or other categories. Full compliance with cybersecurity protocols is mandatory, reflecting the sensitive nature of the item and its intended use in defense systems. Interested parties must access the official solicitation through the provided DIBBS link to obtain detailed requirements and submission instructions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Electrical Insulation Sleeving Manufacturing & SupplyThe contract mandates the manufacture and supply of electrical insulation sleeving at a specified length of five feet per CLIN, with strict compliance required to the SAE AS23053/1 Rev A standard. All supplied materials must adhere to PRI QML/QPL accreditation parameters to ensure quality and reliability under defense sector requirements. The product is intended for use within a military context, with performance and material integrity critical to operational safety. Issued as a subcontract under the Department of Defense’s ASC Commodities Division, the solicitation is open for responses until July 27, 2026, with the primary place of performance located at Lewis McChord, Washington, 98438-1003. The NAICS code 335999 identifies the industry classification as other electrical equipment and component manufacturing, indicating the specialized nature of the production process. The solicitation is accessible via the DIBBS platform, and while no set-aside designation is specified, qualified suppliers must ensure full conformance with military specifications and accreditation timelines to secure award.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Manufacturing of Special Purpose Electrical Insulation SleevingThe contract pertains to the full production of 705 units of specialized electrical insulation sleeving designed to meet rigorous DLA technical and quality specifications. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with all manufacturing and delivery required to be performed at Robins AFB, Georgia, 31098-1887. The work falls under NAICS code 335999, indicating it involves other electrical equipment and component manufacturing. All units must adhere strictly to established military standards for performance, durability, and safety, as the sleeving is intended for critical applications within defense-related systems. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, indicating a tight eight-day window for interested parties to submit proposals. Although the contract does not specify any set-aside classifications, it is explicitly structured as a subcontract, meaning the winning vendor will likely fulfill the order under the authority of a prime contractor. The place of performance is fixed, and the contract emphasizes full compliance with DLA requirements, leaving no room for deviations in material composition, dimensional tolerances, or testing protocols. The sole point of reference for submission and further details is the DIBBS portal link provided.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Special Purpose Electrical Cable SupplyThe contract calls for the supply of 767 spools of special purpose electrical cable compliant with MIL-DTL-12000 specifications, identified by NSN 6145015619059. The deliverables include full preservation, packaging, and labeling in accordance with applicable military standards to ensure readiness for military use. The work is to be performed at the designated place of performance located in Tracy, California, with a zip code of 95304-5000. The solicitation is classified as a subcontract under NAICS code 335999 and is managed by the Maritime Supply Chain under the Department of Defense. The request for quotation was posted on July 19, 2026, and responses are due by July 30, 2026, with all submissions required to meet the specified military compliance and delivery requirements.
MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Power Supply Adapter Manufacturing and AssemblyThe contract is for the full manufacturing, testing, and delivery of seven units of a power supply adapter with part number 61091820-000 and NSN 6130-01-616-4165, requiring strict compliance with DLA Master List technical and quality standards. All work must be performed in accordance with defense procurement regulations, ensuring each unit meets rigorous performance, reliability, and documentation requirements. The project is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the place of performance is at New Cumberland, Pennsylvania, with zip code 17070-5002. This effort is managed by the DLA New Cumberland Facility under the Department of Defense, and the procurement is conducted through the DIBBS system. While specific point of contact details are not provided, all prospective vendors must submit proposals through the official DIBBS portal before the deadline to be considered. The contract emphasizes adherence to defense-specific quality controls and supply chain integrity, with no deviation permitted from established technical specifications.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Supply of 6,000 Feet of Radio Frequency Cable (NSN 6145001499176)The contract requires the supply and delivery of 6,000 feet of radio frequency cable meeting the MIL-DTL-17/127D specification, ensuring full compliance with military-grade performance and environmental standards. The cable must be packaged and marked in accordance with MIL-STD-129, including all required hazard communication labeling to ensure safe handling and transport. Delivery is to be made FOB Destination to DLA San Diego, meaning the vendor assumes all costs and risks until the goods are received at the specified location in San Diego, California, with zip code 92136-3581. The solicitation is classified as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain organization. The response deadline for proposals is July 30, 2026, and the opportunity was posted on July 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Power Cable Supply (NSN 6145-01-666-9522)A 30-foot continuous-length military-spec power cable conforming to MIL-DTL-12000 specifications is being procured under a subcontract for delivery to Selfridge Air National Guard Base in Michigan with a zip code of 48045-5213. The cable must adhere strictly to Department of Defense technical requirements and packaging standards established by the Defense Logistics Agency to ensure compatibility and operational readiness in military environments. The item is identified by NSN 6145-01-666-9522 and falls under the NAICS code 335999 for other electrical equipment and component manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the contracting activity is managed by the Maritime Supply Chain under the Department of Defense. Performance and delivery must satisfy all applicable military specifications without deviation.
MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Electrical Wire Supply – Short Run Quantity (CLIN 0001)The contract calls for the supply of 3,644 feet of electrical wire, packaged on 500-foot spools, with strict adherence to SAE AS22759/43B Rev B technical specifications. All materials must fully comply with military packaging, labeling, and hazardous materials handling requirements to ensure safe transportation, storage, and field usability under defense operational standards. The total quantity is precisely defined to align with a short-run production requirement, indicating a specialized or limited-purpose application within a military or defense context. The solicitation is categorized as a subcontract under NAICS code 335999, with a response deadline of July 30, 2026, and was posted on July 19, 2026. Performance is required at New Cumberland, Pennsylvania, with the contracting activity under the Department of Defense through the Maritime Supply Chain organization. The lack of a solicitation number and point of contact suggests this is an internal or pre-qualified vendor opportunity within a broader framework, likely intended for established contractors familiar with military-grade electrical components and compliance protocols.
MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Electrical Wire Supply – Continuous Length Spools (SAE AS22759E Compliance)The contract requires the supply of 68,856 feet of electrical wire in continuous lengths, wound on 500-foot spools, fully compliant with SAE AS22759E Revision E specifications. The wire must meet stringent military standards for traceability, ensuring each spool is uniquely identified and documented throughout production and delivery. Packaging and labeling must adhere to military requirements, with all materials properly identified, secured, and labeled for handling, storage, and transportation. Compliance with hazardous materials regulations is mandatory, including proper documentation and adherence to DOT and military transport protocols for any substances classified as hazardous. The contract is classified as a subcontract under the NAICS code 335999 and is issued by the Department of Defense through the Maritime Supply Chain. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026. All deliverables must be ready for immediate acceptance upon delivery, with no deviations from the technical, packaging, or documentation requirements accepted without prior written authorization. Full compliance with all federal acquisition and defense supply chain mandates is mandatory for contract award and execution.
MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Electrical Bushing Supply (Commercial Off-the-Shelf Component)The contract pertains to the supply of commercial off-the-shelf electrical bushings identified by NSN 5975010571085, with no installation services required. Delivery quantities will vary based on demand, and all components must meet standard commercial specifications without customization. The solicitation is structured as a subcontract under the NAICS code 335999, which covers other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Performance is designated for Hill AFB, Utah, with a zip code of 84056-5734, indicating the intended destination for delivery. The opportunity was posted on July 19, 2026, with a response deadline of July 27, 2026, providing suppliers a eight-day window to submit proposals. The contract does not include set-aside provisions or specific socioeconomic requirements, and the point of contact information is not provided, requiring interested parties to use the DIBBS portal link for further details and submissions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Electrical Motor Cover Supply (NSN: 2920001039397)The contract calls for the manufacture and supply of 24 electrical motor covers conforming to military specifications, with a specific National Stock Number of 2920001039397. Each unit must adhere to MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, ensuring full compliance with Department of Defense requirements for identification, handling, and logistics. The work falls under NAICS code 335999, indicating it involves other electrical equipment and component manufacturing, and is structured as a subcontract. The solicitation was posted on July 19, 2026, with a firm deadline for responses on July 30, 2026, and the procurement is managed by the Land Supply Chain under the Department of Defense. All deliveries must meet strict military performance and documentation standards, with no set-aside provisions indicated.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 339112
New
DIBBS
Photographic Plate Manufacturing or SupplyThe contract pertains to the manufacturing or supply of military-specification photographic plates identified by NSN 6750014534642, which must comply with Type II, Class 1, Grade A standards. These plates are critical for specialized imaging applications within defense operations and require adherence to stringent performance and quality benchmarks. The solicitation is issued as a subcontract under NAICS code 339112, indicating classification within photographic and photocopier manufacturing, and is managed by the Nuclear Reactor Program under the Department of Defense. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, providing a limited window for interested parties to submit proposals. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the delivered goods must be shipped or where related activities are to be conducted. The contract does not specify a set-aside type or organizational restrictions, and while no point of contact is listed, all submissions and inquiries must follow the official DIBBS procurement portal linked via the provided URL.
Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight and First Destination Transportation (FDT) CoordinationThe contract solicits services to coordinate ocean transport and first destination transportation (FDT) for international suppliers supporting the Nuclear Reactor Program under the Department of Defense. The scope includes arranging ocean freight from overseas origins to a U.S. port, managing all associated FDT costs to ensure delivery to the designated port, and facilitating final inland movement to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with zip code 17070-5002. All logistics operations must comply with Defense Federal Acquisition Regulation Supplement (DFARS) requirements to ensure contractual, regulatory, and security standards are met throughout the supply chain. This subcontract is set under NAICS code 483111 for ocean transport and requires responsive proposals by July 30, 2026, with the solicitation posted on July 19, 2026.
Deep Sea Freight Transportation

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488999
New
DIBBS
Military Shipment Packaging and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling of shipments in strict compliance with MIL-STD-129 standards for delivery to the Defense Logistics Agency’s distribution center at New Cumberland, Pennsylvania, with terms set on FOB Origin basis, meaning the contractor assumes responsibility for all preparation and documentation prior to shipment. All work must meet military specification requirements for uniformity, durability, and traceability, ensuring that each container is properly identified with barcodes, data matrices, and other mandated labeling elements to facilitate seamless processing upon arrival. The solicitation falls under NAICS code 488999 for other support activities for transportation and is categorized as a subcontract opportunity under the Department of Defense’s Nuclear Reactor Program, with responses due by July 30, 2026, and no set-aside provisions specified.
All Other Support Activities for Transportation

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation and submission of hazard warning labels and Material Safety Data Sheets in full compliance with OSHA and DFARS regulations. The work is scoped as a subcontract under the Nuclear Reactor Program, administered by the Department of Defense, with performance localized at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation, posted on July 19, 2026, mandates that responses be submitted by July 30, 2026, and is classified under NAICS code 541690, indicating specialized scientific and technical consulting services. Compliance with applicable federal standards for hazard communication is central, ensuring accurate, up-to-date documentation for all hazardous materials used or handled in connection with the program. There is no set-aside provision specified, and the contract does not indicate any preference for small business or other categories. The absence of a designated point of contact suggests all communications must be directed through the official DIBBS portal linked in the posting.
Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting & Compliance SupportThe contract seeks administrative support to manage small business subcontracting planning, reporting, and compliance with accelerated payment requirements under Federal Acquisition Regulation clauses. The work involves assisting with the development and maintenance of subcontracting plans, tracking subcontractor performance, ensuring accurate reporting to federal systems, and verifying adherence to payment timelines mandated for small businesses. All activities must align with established government compliance standards and support transparency and accountability in subcontracting practices. The assignment is tied to the NAICS code 541611, indicating management consulting services, and is managed by the Nuclear Reactor Program under the Department of Defense. Performance will be conducted at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. While no set-aside designation is specified, the focus emphasizes enabling small business participation in defense-related contracts through structured administrative oversight.
Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Conformance ServicesThe contract requires the performance of origin inspection and quality conformance verification for defense components, strictly adhering to MIL-STD-1916 and ISO 9001:2015 standards to ensure compliance with rigorous defense quality requirements. All work must be conducted to confirm the authenticity, integrity, and technical conformity of components sourced for deployment within defense systems, with inspection protocols calibrated to military specifications and internationally recognized quality management practices. The scope encompasses verifying supplier documentation, material traceability, dimensional accuracy, and process controls across the supply chain to mitigate risk and guarantee readiness for critical defense applications. This subcontract is issued under the NAICS code 541330 for engineering services and is managed by the Nuclear Reactor Program within the Department of Defense, with performance required at the facility in New Cumberland, Pennsylvania, zip code 17070-5002. Responses must be submitted by July 30, 2026, following the solicitation posted on July 19, 2026, through the DIBBS platform. Bidders must demonstrate proven capability in defense component inspections, familiarity with military standards, and the infrastructure to deliver verifiable quality results under tight timelines and high-stakes operational conditions.
Engineering Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and CratingThe contract requires the provision of unit-level packaging, palletization, and marking services tailored to meet stringent military standards for defense logistics shipments, specifically aligning with MIL-STD-2073-1E and DLA RP001. These standards mandate precise methods for protecting, securing, and identifying equipment and materiel to ensure durability, traceability, and compliance during transportation and storage across military supply chains. All work must be executed with strict adherence to these specifications to guarantee operational readiness and logistical efficiency. This subcontract is issued under the NAICS code 561910, reflecting its focus on packaging and labeling services, and is linked to the Nuclear Reactor Program within the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, leaving a narrow window for qualified vendors to submit proposals. The contract does not specify a set-aside type, indicating it is open to general competition, and interested parties must access the DIBBS portal via the provided link to obtain additional details and submit responses.
Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract entails the provision of hazard communication labels, safety data sheets, and regulatory documentation specifically for defense shipments containing hazardous materials, ensuring full compliance with federal and military standards. The work is required to support the Nuclear Reactor Program under the Department of Defense and must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All deliverables must meet stringent regulatory requirements for the transport and handling of dangerous goods in a defense context, including accurate labeling, up-to-date SDS formatting, and adherence to international and domestic transportation regulations. This is a subcontract opportunity classified under NAICS code 541380, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The solicitation does not specify a set-aside type, and no point of contact details are provided. Interested parties must submit proposals prior to the deadline to qualify, and successful bidders will be responsible for maintaining the integrity and accuracy of all compliance documentation throughout the lifecycle of the shipments. The scope demands precision, timeliness, and deep familiarity with defense logistics and hazardous materials handling protocols.
Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Defense Component Kit Supply (Seal & Sheave Assembly)The contract pertains to the supply and delivery of a precision defense component kit consisting of seals and sheave assemblies, manufactured and packaged to meet stringent military standards for quality, handling, and hazardous material compliance. All components must adhere to established defense specifications for performance, durability, and safety, with packaging and labeling requirements designed to ensure secure transport, proper identification, and regulatory adherence throughout the supply chain. The delivery location is specified as New Cumberland, Pennsylvania, with the item falling under NAICS code 332721, indicating fabrication of metal stampings and forged components for military use. This subcontract was posted on July 19, 2026, and responses are due by July 30, 2026, with the sponsoring agency identified as the Nuclear Reactor Program under the Department of Defense. Although no set-aside designation or point of contact details are provided, the procurement is structured under a federal subcontracting framework, emphasizing specialized technical capability and strict regulatory compliance. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.
Precision Turned Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Supply of Solid Rubber Sheets (CLASS 3B, GRADE 30)The contract calls for the procurement and delivery of eleven units of solid rubber sheet material adhering to military specifications CLASS 3B and GRADE 30, with dimensions of 36 inches by 36 inches and a thickness of 0.5 inches, identified by NSN 9320-01-462-3163. This material is designated for critical application use, requiring strict compliance with quality and performance standards to ensure operational reliability in demanding environments. The material must meet all technical and inspection requirements associated with its military grade designation, and delivery must be made to the specified performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is structured as a subcontract under NAICS code 326220, which pertains to rubber product manufacturing, and is issued by the Nuclear Reactor Program under the Department of Defense. The response deadline is set for July 30, 2026, at 5:00 PM, with the posting date occurring on July 19, 2026, providing a twelve-day window for potential vendors to submit proposals. No set-aside classification or specific organization type is indicated, and all submissions must align with the technical and delivery requirements outlined for this critical defense-related procurement. The official interface for the solicitation is accessible through the DIBBS system via the provided URL.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323111
New
DIBBS
Defense-Compliant Marking and LabelingThe contract requires the application of MIL-STD-129 compliant markings and labels on both the fuse panel and the shipping container, ensuring all required federal defense standards are met. Key identifiers such as the contract number, CAGE code, and part number must be clearly and accurately displayed, along with OSHA hazard labeling adhering to 29 CFR 1910.1200 to communicate potential risks associated with the transported materials. The work is to be performed under a subcontract issued by the Department of Defense’s Nuclear Reactor Program, with performance taking place at an FPO address with ZIP code 96691-3300. The solicitation falls under NAICS code 323111, indicating a focus on printing and related support activities, and the response deadline is set for July 30, 2026, with posting occurring on July 19, 2026.
Commercial Printing (except Screen and Books)

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with DFARS 252.204-7012 and 252.204-7008. This includes conducting an annual self-assessment of security posture, promptly reporting any cyber incidents as mandated, and maintaining documented evidence of control adherence throughout the contract period. The effort is focused on protecting Controlled Unclassified Information and aligning with Department of Defense cybersecurity standards. This is a subcontract under the Nuclear Reactor Program, part of the Department of Defense, with a performance location in FPO, ZIP 96691-3300. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. The NAICS code 541512 indicates the work relates to computer systems design services, suggesting the contractor will provide technical cybersecurity implementation and support. There is no set-aside designation, and while no point of contact is listed, the opportunity is accessible via the DIBBS platform.
Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details