Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Tapered Roller Bearing Cup (Component) Manufacturing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the manufacture of a high-value cup component used in tapered roller bearings, classified as a Critical Safety Item under strict source control requirements. All production must strictly conform to the approved engineering drawings and technical data package to ensure dimensional precision, material integrity, and performance reliability under demanding operational conditions. The work is subject to rigorous quality assurance protocols due to the component’s role in mission-critical defense systems. This subcontract, issued under NAICS code 332991, is managed by the Defense Logistics Agency on behalf of the Department of Defense. The award was posted on July 17, 2026, and performance is expected to meet exacting standards required for military-grade bearings. While specific performance location and point of contact details are not provided, the contract is administered through the DLA’s procurement system and is tied to the reference number SPE4A620F4101. Compliance, traceability, and adherence to defense-specific manufacturing controls are mandatory throughout the production lifecycle.

General Info

Manufacture of critical safety cup component for defense bearings under strict DLA oversight with full traceability and compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a high-value cup component for tapered roller bearings under Critical Safety Item (CSI) and source control, requiring conformance to engineering drawings and technical data package.

Similar Contracts

Same NAICS industry code

BEARING, BALL, ANNULAThis contract is for the procurement of one ball annular bearing with NSN 3110-01-492-9749, governed by solicitation SPE4A6-26-T-09MH, with a delivery deadline of 20 days from award and FOB destination terms. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the cost of all components—rolling elements, retainer, inner race, or outer race—originating from these regions, as mandated by DFARS clause 252.225-7016. Contractors are required to submit a formal declaration affirming the domestic or foreign origin of materials, and failure to provide this documentation may disqualify their bid. The solicitation may be canceled or suspended if no compliant offers are received, pending a potential waiver under DFARS 225.7009-4. The item is designated as a critical application with a specific approved source, Johnson Controls Navy Systems, LLC, part number 064-48208C000. All supplies must adhere to stringent packaging, preservation, and marking standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are dictated by bearing type and closure, requiring specific protective lubricants and process controls defined in MIL-DTL-197M. Packaging facilities must meet quality assurance verification criteria outlined in that standard. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise contracted, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Documentation for source approval, tooling, and casting/forging assistance must be submitted through DLA channels if applicable, and all markings and unit of issue must comply with DoD and ANSI X12 standards.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, BALL, ANNULARThe contract solicitation SPE4A6-26-T-06GE seeks 17 annular ball bearings with part number AA59585-205JEBX, identified by NSN 3110008751539, under a commercial item designation that includes commercial off-the-shelf specifications. Delivery is required within 20 days of award, with FOB origin terms, inspection and acceptance to occur at the manufacturer’s location, and all packaging, preservation, and marking strictly governed by MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods must align with bearing type and closure as defined in MIL-DTL-197M’s technical tables, with lubrication specified as VERSILUBE G-351 for this part. The contractor’s packaging facility must comply with quality assurance verification per Section 4 of MIL-DTL-197M, and all items must be palletized and labeled in accordance with DLA-specific packaging requirements and special marking codes. A critical sourcing restriction under DFARS 252.225-7016 mandates that the bearing be manufactured in the United States, its outlying areas, or Canada, and that over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—must originate from these regions. Contractors must submit a completed Declaration Form, obtainable from the DLA Foreign Bearing Waiver website, to demonstrate compliance; failure to provide this documentation will result in disqualification. The solicitation is subject to automated award consideration, and pricing is evaluated under a price-driven mechanism, though no unit or total price is specified in the offer. Compliance with FAR and DFARS clauses including Equal Opportunity, Combating Trafficking in Persons, Employment Eligibility Verification, Hazardous Materials Identification, and NIST SP 800-171 cybersecurity requirements is mandatory. Offerors must hold a valid Unique Entity ID and CAGE code, and represent their small business status and socioeconomic certifications through SAM.gov. All proposals must be submitted electronically via the DLA Internet Bid Board System by the deadline of August 4, 2026, and any resulting contract will use WAWF for all invoicing and receiving report submissions. Failure to meet any technical, quality, or sourcing mandates may lead to cancellation or waiver requests pending further review

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, ROLLER, SELFThe contract specifies the procurement of three roller self-bearing units with part number ZGS-10294-1 and NSN 3110-01-629-2981 from Zephyr International LLC under solicitation SPE4A6-26-T-09GU. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The item is not subject to Item Unique Identification per DFARS 252.211-7003(c)(1)(i), and all packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific directives on protective lubricants based on bearing type and closure. Packaging must adhere to DLA’s proprietary requirements, with preservation methods selected according to Table I and II referenced in MIL-DTL-197M, and quality assurance verification required at the contractor’s facility. Delivery is FOB origin within ten days, with no quantity variance permitted, and inspection and acceptance occur at the destination. The contract price is $3.00 per unit for a total of $9.00, with the purchase request number 7017607632 and CLIN 7017554855. The point of performance is Fort Campbell, 42223-5000, and the contracting office is the ASC Commodities Division under the Department of Defense. All technical specifications referenced through R-numbers are binding and must be accessed via the DLA eProcurement portal. Special marking and preservation protocols are strictly enforced with no tolerance for deviation, and the contractor’s packaging facility must meet the quality verification standards outlined in Section 4 of MIL-DTL-197M. The solicitation was posted on July 23, 2026, with responses due by July 31, 2026, and the NAICS code is 332991. Primary point of contact is Quentin McEachern, reachable via email and phone provided in the contract data.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, SLEEVEThe contract solicitation SPE4A6-26-T-09NP is for 11 sleeve bearings identified by NSN 3120-00-878-6227, with a delivery requirement of 84 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is subject to Cybersecurity Maturity Model Certification Level 2 requirements, DLA packaging standards, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Physical identification markings are required on the bare item, though Item Unique Identification is waived per customer request. Technical data associated with the bearing is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location; only DLA-approved contractors with approved JCP certification, completed DOD export training, and authorized access may handle this data. The place of performance is Tinker AFB, Oklahoma, and inquiries should be directed to Charleen Weber at the provided contact information.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, PLAIN, SELF ALIThe contract calls for the procurement of 75 plain self-aligning bearings identified by NSN 3120-00-110-8541, with delivery required 166 days after the delivery order under FOB destination terms to the designated location in Tracy, California. The technical and quality requirements are strictly tied to the referenced drawing and the DLA Master List of Technical and Quality Requirements, with adherence to MIL-DTL-197M for preservation, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking, labeling, and bar-coding. Inspection and acceptance must occur at the origin, and the contractor’s quality system must comply with SAE AS9003 or ISO 9001 as tailored to AS9003. Cybersecurity compliance is mandated under CMMC Level 2, with the contractor required to safeguard Controlled Unclassified Information in accordance with NIST SP 800-171 and relevant DFARS clauses. Technical data associated with the item is subject to export controls under ITAR or EAR, requiring prior authorization from the Department of State or Commerce, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and approved access credentials. Packaging must meet all DLA and military standards, including proper preservation methods based on bearing type and closure, with hazardous materials properly labeled per OSHA’s Hazard Communication Standard and MIL-STD-129. Invoicing must be processed electronically through Wide Area WorkFlow, and offerors must provide valid Unique Entity IDs and CAGE codes, along with accurate representations of their small business status, including any joint venture affiliations. Compliance with FAR clauses on employment eligibility, combating human trafficking, sustainable products, and equal opportunity is required, with deviations authorized under 2026-00038. Export-controlled data handling is governed by DFARS 252.225-7048, and while contractor personnel are not required to hold security clearances, the entity must implement robust information system safeguards. No pricing data is specified in the solicitation, and award is expected to be made based on compliance with technical, quality, cybersecurity, and regulatory requirements under a notional lowest price technically acceptable evaluation, though the official basis of award is not explicitly stated. Proposals must be submitted via DIBBS by the deadline of July 28, 202

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BUSHING, SLEEVEThe contract involves the procurement of a bushing sleeve with NSN 3120010145565 and part number 66-29042 from Boeing, CAGE 81205, classified as a critical application item. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific clauses governing packaging, marking, measurement equipment, and documentation. Non-accepted supplies must have government identification removed, and the item must be physically marked per RQ017, though unit identification is not required. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a Q pack code and no special marking, while palletization follows DLA packaging standards. The item is to be delivered FOB origin in quantities of 10 units within 20 days, with zero variance allowed, and inspection and acceptance occur at origin. Technical data package revision A general 1 must conform to QAP 13873 QAP-B02 revision B dated December 11, 2013. Source approval documentation is required under RC001, and covered defense information provisions may apply. The contract was issued under solicitation SPE4A6-26-T-09KV with a response deadline of July 31, 2026, and is managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BUSHING, SLEEVEThe contract pertains to the procurement of a BUSHING, SLEEVE with NSN 3120-01-014-5565 and part number 66-29042, supplied exclusively by Boeing under CAGE code 81205 as the approved source. This is a critical application item governed by stringent technical and quality requirements referenced from the DLA Master List, including tailored quality standards, packaging directives per MIL-STD-2073-1E and MIL-STD-129, and specific marking instructions without special identifiers. Item Unique Identification is not required per service customer guidance, and physical marking must adhere to RQ017 specifications. The product must be delivered within five days FOB origin with zero tolerance for quantity variance, inspected and accepted at origin, and packed in accordance with DLA packaging rules including palletization and storage methods. The contract includes documentation mandates for source approval and measuring equipment calibration, and is subject to Covered Defense Information provisions. The unit of issue is each (EA), with a total quantity of four units, procured under solicitation SPE4A6-26-T-09KU, with a response deadline of July 31, 2026, and managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, ROLLER, SELFThe contract pertains to the procurement of three self-aligning roller bearings identified by NSN 3110016292968 and part number ZGS-10127-1, supplied by ZEPHYR INTERNATIONAL LLC under solicitation SPE4A6-26-T-09GS. Delivery is required within ten days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. All items must comply with detailed technical, quality, and packaging standards, including adherence to MIL-STD-2073-1E and MIL-DTL-197M for preservation, packaging, and marking. Preservation methods are dictated by bearing type and closure, with specific lubricants and procedures governed by referenced tables and paragraphs within MIL-DTL-197M. Packaging and palletization must meet DLA requirements, and marking must conform to MIL-STD-129 with special codes applied as needed. The contractor’s packaging facility must satisfy quality assurance verification provisions outlined in MIL-DTL-197M Section 4, and measuring and test equipment used must be properly calibrated and controlled. This procurement is subject to all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA web link, with the version in effect on the solicitation issue date governing compliance. The contract also incorporates cybersecurity requirements mandating CMMC Level 2 self-assessment certification. Covered defense information protocols apply, and any non-accepted supplies must have government identification removed prior to return. The unit of issue is each, with total value based on individual unit pricing. The place of performance is Fort Campbell, and the point of contact is Niyana Yarber of the ASC Commodities Division. All documentation, including technical data packages and revisions, must align with referenced specifications, and the contractor is responsible for ensuring full compliance with all applicable DoD and DLA standards throughout the fulfillment process.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, WASHER, THRUSTThe contract specifies the procurement of 10 thrust washers with NSN 3120-01-272-6511 under solicitation SPE4A6-26-T-09HA, with a delivery requirement of 169 days after award. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated. Attributes classified as critical, major, or minor must adhere to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may inform sample size but not acceptance criteria. Documentation for source approval must comply with RC001, and all technical and quality requirements are sourced from the DLA Master List, with revisions tied to solicitation or award dates as applicable. Packaging must meet DLA standards, inspection occurs at origin, and government identification must be removed from non-accepted items. Mercury and mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment per NAVSEA 5100-003D. Measuring and test equipment must be calibrated and verified. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. The contract is issued by the Department of Defense, ASC Commodities Division, with performance in New Cumberland, PA, and inquiries directed to Marion Williams.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

BEARING, BALL, ANNULAThe contract pertains to the procurement of a single ball annular bearing with NSN 3110-01-706-0549 and part number BRG-400-002, supplied by BERG MANUFACTURING, INC. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-197M, including preservation methods tailored to bearing type and closure, protective lubricant selection per specified tables, and adherence to quality assurance verification standards. Marking must follow MIL-STD-129 with special codes as designated, and palletization must meet DLA packaging requirements. The bearing is subject to strict domestic sourcing restrictions under DFARS 252.225-7016, requiring that all components—rolling elements, retainer, inner race, and outer race—manufactured in the United States, its outlying areas, or Canada must account for more than 50% of the total bearing cost; contractors must submit a formal declaration affirming compliance, failure of which may disqualify the offer. The solicitation may be canceled or held pending waiver approval if no compliant offerings are received. Mercury and mercury compounds are prohibited from intentional addition or direct contact with the bearing except in specific exempted applications such as certain batteries, instruments, or sensors as defined by NAVSEA, with all exempted items requiring shockproof construction and secondary containment. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan with zero nonconformances required unless otherwise stated, and verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Item Unique Identification is not required per customer request. All technical and quality requirements are governed by the DLA Master List referenced in the contract, and the applicable revision is controlled by the solicitation issue or award date depending on acquisition size. The unit of issue is EA, and the sole point of contact is Katelyn Williams of the ASC Commodities Division, Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

CONE AND ROLLERS, TAThis contract solicits four tapered roller bearings identified by NSN 3110001003080 and part number AA59649-470A, with a unit price of $4.00 per unit and a total contract value of $16.00. Delivery is required within five days FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. The item is classified as a commercial item and must comply with DLA-specific packaging requirements per MIL-STD-2073-1E and MIL-DTL-197M, including preservation methods determined by bearing type and closure, protective lubricant selection, and strict packaging and marking standards. Marking must follow MIL-STD-129 with special codes and palletization in accordance with DLA packaging guidelines. The bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these countries. Contractors must submit a completed declaration form affirming compliance with this domestic sourcing restriction, available via the DLA foreign bearing waiver portal; failure to provide this may disqualify the offer. If no compliant offers are received, the solicitation may be cancelled or held pending a waiver. Technical and quality requirements are incorporated from the DLA Master List, and quality assurance processes must align with referenced specifications including QAP-13873 and CID A-A-59649C Revision B. The solicitation number is SPE4A0-26-T-4025, with a response deadline of July 31, 2026, and the contracting activity is the Department of Defense’s Aviation Supply Chain ESOC Buys.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

BUSHING, SLEEVEThe contract pertains to the procurement of five bushing, sleeve units with NSN 3120-01-192-4938 and part number 204-010-495-107 for Bell Textron Inc, under solicitation SPE4A6-26-T-09NQ. Delivery is required within 20 days FOB origin, with no variance permitted in quantity, and both inspection and acceptance are to occur at the origin. Packaging must comply fully with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special markings required. Palletization follows DLA packaging requirements, and the item is designated as a critical application item. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified per prescribed verification levels or AQLs. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with revisions controlled by the solicitation or award date depending on acquisition size. The shipment is destined to the U.S. Army Aviation Depot in Tainan City, Taiwan, with point of contact Liu Yi-Ting and designated freight code BTWB5461970056. The required delivery date is July 23, 2026, and the contract is administered by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity Compliance (CMMC Level 2)The contract requires implementation and self-assessment for Cybersecurity Maturity Model Certification (CMMC) Level 2 to safeguard Controlled Unclassified Information (CUI) in alignment with NIST Special Publication 800-171 requirements. The work involves establishing and documenting cybersecurity controls necessary to meet CMMC Level 2 standards, ensuring compliance through internal evaluations and evidence collection. This subcontract is tied to the Department of Defense, specifically under the Defense Logistics Agency, and performance must occur at the FPO location with ZIP code 96673. The solicitation is categorized under NAICS code 541512, indicating it relates to computer systems design services. Responses are due by July 28, 2026, and the contract was posted on July 23, 2026, with no set-aside designation specified. All activities must align with federal cybersecurity frameworks to maintain the integrity and confidentiality of CUI handled under this agreement.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the identification, labeling, and proper documentation of hazardous materials associated with water heaters and their packaging, ensuring full compliance with OSHA standards and the provision of Safety Data Sheets. All materials must be accurately labeled with hazard warnings and handled in accordance with regulatory requirements to ensure safety during storage, transport, and use. The work is scoped to support the Defense Logistics Agency under the Department of Defense, with performance expected at FPO 96673. This is a subcontract under NAICS code 541620, with responses due by July 28, 2026, following a posting date of July 23, 2026. Compliance with federal hazardous materials regulations is mandatory, and failure to meet labeling or documentation standards could result in non-conformance or rejection of deliverables.

Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

Military Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and preparation of electric water heaters in accordance with military standards, specifically incorporating the Air Exchange method and fiberboard boxing to ensure protection during transit and storage. All work must meet rigorous defense requirements for environmental resilience, durability, and handling under extreme conditions, ensuring the equipment remains fully operational upon arrival at remote or hostile locations. The scope demands strict adherence to standardized military packaging protocols to safeguard sensitive components against moisture, corrosion, vibration, and physical impact throughout the logistics chain. This subcontract is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 493190, indicating it relates to other support activities for transportation. The place of performance is designated as FPO with ZIP code 96673, suggesting delivery to a military postal location, likely overseas or in a deployed theater. Bidders must submit responses by the deadline of July 28, 2026, with the solicitation posted on July 23, 2026. The contract emphasizes compliance with government specifications and is intended to support defense logistics networks by ensuring reliable, condition-controlled delivery of critical heating units to military installations.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Electric Water Heater SupplyThe contract requires the supply of two military-specification electric water heaters, identified by NSN 4410015154021 and part number CD-17722V, for installation aboard the USS NORTH CAROLINA (SSN 777). These units must meet stringent defense standards for durability, performance, and safety in naval environments. The solicitation is issued as a subcontract under the Defense Logistics Agency, with the NAICS code 332410 indicating classification within the appliance manufacturing sector. The response deadline is set for July 28, 2026, and the place of performance is designated as FPO with ZIP code 96673, indicating delivery to a fleet or naval facility. All proposals must align with military procurement protocols and be submitted through the DIBBS platform prior to the specified deadline. The contract does not specify any set-aside provisions, and no point of contact is listed, suggesting standardized submission procedures.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 21 hours ago

DEADLINE

BELLOWS ASSEMBLY, VALVEThe contract pertains to the procurement of a 3-inch by 4-inch bellows assembly valve made of stainless steel, identified by NSN 4820-01-093-1688 and part number NMP-1065 PC 31, supplied by Emerson Automation Solutions. The item is a single unit requiring delivery within 20 days FOB destination, with zero variance allowed in quantity and inspection and acceptance both occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, with preservation method ZZ requiring Level A preservation as defined in the commodity specification, and marking must adhere to MIL-STD-129 without special markings. All packaging and preservation practices must meet DLA’s official packaging requirements, and palletization must follow RP001 guidelines. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for approved exceptions such as batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents designated by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment system per NAVSEA 5100-003D. The item is destined for the USS Ronald Reagan CVN 76, delivered to FPO AP 96616, with shipment details referencing DLA procedural notes C19 and C20 for transportation and freight instructions. The contracting vehicle is SPE7MC-26-T-153W, issued by the Defense Logistics Agency under the NAICS code 336310, with a response deadline of August 3, 2026, and an original required delivery date of July 24, 2026. Technical and quality standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and all requirements designated with an R or I number must be fully adhered to. The unit of issue is each (EA), and government use identifiers such as IPD, DIC, and DIST codes are included for administrative tracking. The point of contact for the procurement is Paula McClary at DLA, with electronic access to full requirements available through the DLA eProcurement portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

CUTTER BIT, TOOL HOLThe contract pertains to the procurement of two cutter bits with tool holders, identified by NSN 3455-01-331-9028 and part number 43-799-02, supplied by Illinois Tool Works, Inc. The total quantity is two units, each priced at $2.00, with a total contract value of $4.00, and delivery is required within 20 days FOB origin. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must conform to MIL-STD-129 and RP001 packaging specifications. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan with zero non-conformances required unless otherwise specified, with acceptance occurring at the destination. Packaging and palletization must adhere strictly to DLA guidelines, and the shipment must be sent via traceable means excluding parcel post. The delivery destination is the Everitt B Hunley USARC facility in Scottsburg, Indiana, and the freight shipping and marking address are identical. The contract references technical and quality standards identified by R and I numbers in the DLA Master List, and all labeling, marking, and unit of issue requirements must reflect the specified U/I and QUP values. The required delivery date is September 21, 2023, and the contract number is SPE8E5-26-T-3035.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 21 hours ago

DEADLINE

MODULATOR, RADIO TRANSMThe contract pertains to the procurement of seven MODULATOR, RADIO TRANSM units identified by NSN 5865-01-178-2734 under purchase request 7014870421. The solicitation, numbered SPE4A7-26-Q-0285, was posted on July 23, 2026, with a response deadline set for August 6, 2026. This request is issued by the Defense Logistics Agency, a division of the Department of Defense, and is categorized as a federal procurement. The solicitation does not specify a set-aside type, NAICS code, or detailed office address, but the place of performance and point of contact information are unspecified. Interested parties must respond through the official DIBBS platform via the provided UI link before the deadline to be considered for award.

Other Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATINThis contract is for the procurement of two quarts of polyurethane coating, specifically AXALTA COATING SYSTEMS LLC model 75CB2 with part number IMRON AF400 MIX QUALITY EP, identified by NSN 8010-01-711-2075. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, and it is subject to strict packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129. Delivery must be made FOB destination within 20 days of contract award to the Marine Corps Air Facility in Quantico, Virginia, via traceable means only—parcel post is prohibited. The product is hazardous and must comply fully with the updated OSHA Hazard Communication Standard, requiring submission of Safety Data Sheets aligned with 29 C.F.R. 1910.1200 and appropriate labeling per GHS guidelines prior to award. Supplier employees must be trained on these requirements. Packaging must adhere to DLA-specific regulations, including special marking code 32 indicating Type I shelf-life status, and palletization must follow RP001 standards. The contracting office is the Defense Logistics Agency, and the solicitation number is SPE8ES-26-T-2440, with a response deadline of July 29, 2026, and an original required delivery date of July 27, 2026. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the item has zero variance allowance in quantity.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

STRIP, ELECTRICAL GROUNThe contract pertains to the procurement of 139 units of a strip, electrical ground, identified by NSN 5999-01-616-1406, under solicitation number SPE7M5-26-T-348L, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a standard procurement timeline for federal acquisition. The item is classified under a federal procurement channel without a specified set-aside type or NAICS code, suggesting it is part of a general supply requirement. The place of performance and office address details are not provided, but the procurement is conducted through the DLA's DIBBS platform, with all documentation accessible via the provided link. The request is for a single line item in a quantity of 139, likely to support military or defense-related electrical systems requiring standardized grounding components.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

DRUM, SHIPPING AND STORThe contract solicitation pertains to a drum designed for shipping and storage, identified by NSN 8110-00-030-7780, with a requested quantity of one unit. Issued under solicitation number SPE8E9-26-Q-0483 by the Defense Logistics Agency on behalf of the Department of Defense, the opportunity was posted on July 23, 2026, and responses are due by August 24, 2026. This is a federal solicitation with no specific set-aside designation, indicating it is open to all qualified vendors without restrictions based on business size or category. The place of performance and office address details are unspecified, though the contracting agency operates within the United States. Interested parties can access the full solicitation details through the official DIBBS portal using the provided link.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

FILTER, BAND PASSA band pass filter with NSN 5915-01-630-9763 is being solicited under contract number SPE7M5-26-Q-0730 by the Defense Logistics Agency, a department of the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 7, 2026, and requests a single unit for procurement. This is a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general industry competition. The place of performance and office address details are not provided, but the contracting action is managed through the DLA’s DIBBS platform, with all relevant information accessible via the provided link.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

LIFE PRESERVER, VESTThis contract specifies the procurement of six X-Large white life preserver vests designated as Commercial MK-1, with the NSN 4220-01-487-3657, under solicitation SPE8E6-26-Q-0597. The vests must comply with strict technical and quality requirements referenced from the DLA Master List, and mercury or mercury-containing compounds are strictly prohibited in or on the hardware except for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The vest must include a 1.5 by 1.5-inch nylon loop tape patch on the left shoulder for attaching a distress marker light, and the light, sea dye marker, and whistle must be secured to the vest using 48-inch and 24-inch nylon cords with a minimum 90-pound tensile strength, tied with bowline knots. The contract mandates strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking, with no special marking required, and palletization must follow DLA packaging guidelines. All items are subject to destination inspection and acceptance, with a firm fixed price and zero variance allowed in quantity. Delivery is required within 60 days after award, with freight shipped to the USNS Amelia Earhart at FPO AP 96664, and transportation governed by DLA procedural notes. The contract applies to approved suppliers including SWITLIK PARACHUTE COMPANY, INC., MUSTANG SURVIVAL MFG, INC., and NAVAL GROUP HELLAS SINGLE MEMBER S.A., each offering their respective part numbers. A Certificate of Quality Compliance is required, and the item is classified as a Critical Application Item. The contract was posted on July 23, 2026, with a response deadline of July 28, 2026, and is issued by the Defense Logistics Agency under the Department of Defense, with Ryan Thornton listed as the point of contact. The government’s material need date is June 26, 2026, aligning with the scheduled delivery timeline.

Sporting and Athletic Goods Manufacturing

POSTED

about 21 hours ago

DEADLINE