Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Compliance and Documentation Support

Active

International

Response Deadline07/28/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the preparation of comprehensive technical bid documentation to demonstrate full compliance with Annex A of Canadian military and SACC standards, focusing on delivering verified test reports, valid calibration certificates, and accurate packaging and labeling statements. All submitted materials must meet stringent regulatory requirements to ensure alignment with defense procurement protocols and quality assurance benchmarks set by the Government of Canada. The work is critical to securing a subcontract opportunity under the Department of National Defence, where technical accuracy and adherence to documented specifications are non-negotiable. The solicitation is open for bids until July 28, 2026, with submissions due by 7:00 PM EDT, and the contract type is classified as a subcontract under NAICS code 541330, indicating it pertains to scientific and technical consulting services. Work performance is to be conducted within Canada, with no specified physical office location or point of contact provided, suggesting direct submission via the CanadaBuys portal. Failure to include complete, certified, and properly formatted documentation may result in disqualification, making precision and compliance the primary criteria for evaluation.

General Info

Submit certified technical bid docs per Canadian military and SACC standards by July 28, 2026, for defense subcontract.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation of technical bid documentation demonstrating compliance with Annex A, including test reports, calibration certificates, and packaging/labeling statements per Canadian military and SACC standards.

Similar Contracts

Same NAICS industry code

Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an indefinite-delivery, indefinite-quantity contract for major construction projects across various phases including planning, design, construction, and closeout. The scope encompasses support for multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches, with an emphasis on ensuring projects adhere to approved schedules, budgets, and quality standards. This contract will serve as a vehicle for procuring CM services on an as-needed basis to support the Port’s evolving infrastructure initiatives. The contract is categorized under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port of Seattle’s Construction Management office. Primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 21, 2026, and interested parties can access further details via the Port’s official portal. There is no set-aside classification indicated, and performance is expected to occur at various locations under the Port’s jurisdiction.

Construction Management

POSTED

about 20 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment that demands continuous reliability and safety. The work centers on identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system longevity, and compliance with applicable regulations. All services will be executed through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational standards. The contract is structured as an Indefinite-Delivery/Indefinite-Quantity agreement under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager; inquiries and communications should be directed through their provided contacts. The solicitation was posted on July 21, 2026, with performance expected to take place at the airport. There is no specified set-aside type, and the contract is designed to support ongoing and evolving needs across the airport’s critical infrastructure systems.

Aviation Facilities & Infrastructure

POSTED

about 20 hours ago

DEADLINE

Safety and Code Compliance InspectionThe Texas Department of Transportation is seeking a qualified third-party inspector to conduct a comprehensive evaluation of structural, electrical, and fire code compliance for a project prior to final acceptance. This subcontract requires the vendor to perform detailed inspections to ensure all systems and components meet current safety and regulatory standards, with the goal of verifying readiness for occupancy or operational use. The inspection must be thorough and documented to provide verifiable evidence of compliance across all specified domains. The solicitation was posted on July 21, 2026, with a firm deadline for responses on September 2, 2026, at 6:00 PM. The contract falls under NAICS code 541330, which categorizes it as architectural, engineering, and related services. The work will be performed in Texas, though specific location details are not provided. Interested parties can access the full solicitation through the Texas SmartBuy portal, and the procurement is open to eligible subcontractors without a designated small business set-aside.

Texas Department of Transportation

POSTED

about 22 hours ago

DEADLINE

in about 1 month

IFB 26-00409, Veeder Root System Upgrade ProjectHampton Roads Transit is soliciting bids for the procurement and installation of Veeder-Root TLS450 Plus fuel and lubricant monitoring systems across its facilities in Hampton Roads, Virginia. The project requires qualified contractors to furnish, install, configure, test, and commission the systems to ensure accurate tracking and management of fuel and lubricant usage. The solicitation, identified as IFB-124728 under the title IFB 26-00409, was posted on July 20, 2026, and bids must be submitted by August 20, 2026, at 7:00 PM EST. The work is to be performed entirely within the Hampton Roads region, and all responses must be submitted through the designated online vendor portal. Interested parties should direct inquiries to Fevrier Valmond, the designated point of contact, via email at fvalmond@hrtransit.org or phone at 757-222-6000.

Hampton Roads Transit

POSTED

DEADLINE

Quality Inspection & Compliance MonitoringThe contract pertains to third-party inspection services aimed at verifying the quality and compliance of crack sealing operations on transportation infrastructure, with specific focus on depth, width, and adhesion properties. The inspections must align with technical standards set by the Texas Department of Transportation and AASHTO, ensuring that all work meets rigorous performance and durability requirements. Comprehensive documentation and detailed reporting are required as part of the quality assurance process to validate compliance and facilitate ongoing maintenance oversight. This subcontract is issued by the Texas Department of Transportation under NAICS code 541330, which categorizes it under architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 11, 2026, and is accessible via the Texas SmartBuy portal. Performance of the work is expected to occur across Texas state-maintained roadways, though specific locations are not detailed. The contract emphasizes objective evaluation and transparent reporting to support state-level infrastructure integrity and regulatory compliance.

Texas Department of Transportation

POSTED

DEADLINE

Third-Party Quality Assurance and InspectionThe contract involves performing field inspections and testing to ensure compliance with Texas Department of Transportation specifications for aggregate application, compaction, and surface grading. This third-party quality assurance and inspection work is critical to verifying that construction materials and practices meet state standards for road and infrastructure projects. The scope requires on-site evaluation by qualified personnel to validate that all aggregate-related activities adhere strictly to TxDOT requirements, with findings used to support project acceptance and regulatory compliance. This subcontract, posted on July 20, 2026, has a response deadline of August 12, 2026, and is classified under NAICS code 541330 for engineering services. The work is to be performed across Texas under the authority of the Texas Department of Transportation, though specific locations are not detailed in the provided data. The solicitation is open to eligible subcontractors seeking to support state infrastructure quality assurance efforts, with no set-aside designation specified. The contract is accessible via the TX SmartBuy portal for interested parties to review full requirements and submission procedures.

Texas Department of Transportation

POSTED

DEADLINE

Roadway Inspection and Quality AssuranceThe contract titled Roadway Inspection and Quality Assurance requires the performance of inspections to ensure that all maintenance operations on Texas roadways meet the technical and safety standards established by the Texas Department of Transportation. These inspections focus on verifying surface quality, the appropriateness and condition of materials used, and adherence to safety protocols during execution of work. The effort is critical to maintaining infrastructure integrity and public safety across the state’s transportation network. The contract is structured as a subcontract and falls under NAICS code 541330, indicating it involves architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 12, 2026, at 4:00 PM Central Time. All performance is expected to occur within Texas, though specific cities or locations are not detailed in the provided information. The contract is managed by the Texas Department of Transportation under its Texas organizational unit, with no set-aside provisions identified. Interested parties must submit responses through the designated portal at the provided Texas SmartBuy link, and all qualified subcontractors are expected to comply fully with TxDOT’s regulatory and operational guidelines throughout the inspection process.

Texas Department of Transportation

POSTED

DEADLINE

Construction Inspection & Quality ControlThe contract solicits third-party inspection services to ensure construction projects adhere to Texas Department of Transportation specifications through comprehensive quality control measures. This includes material testing to confirm compliance with technical standards, compaction checks to verify proper soil and pavement density, and as-built verification to validate that final construction matches approved designs. The work is classified under NAICS code 541330 and is structured as a subcontract, indicating it supports larger construction efforts overseen by TxDOT. Performance is expected across the state of Texas, with no specific location designated, allowing flexibility for inspection activities wherever TxDOT projects are underway. Interested parties must submit responses by August 12, 2026, and the solicitation was posted on July 20, 2026, providing a four-week window for proposals. The procurement is facilitated through the Texas SmartBuy platform, with all details accessible via the provided public link.

Texas Department of Transportation

POSTED

DEADLINE

Inspection and Quality Assurance SupportThe contract involves providing on-site inspection and quality assurance support for infrastructure projects under the Texas Department of Transportation, focusing on verifying work quality, documenting completed tasks, and assisting the prime contractor during TxDOT acceptance inspections. This subcontract requires personnel to be physically present at project sites to ensure compliance with technical standards, maintain accurate records of construction progress, and serve as a liaison during official inspections to facilitate smooth acceptance processes. The opportunity is open for submissions until August 12, 2026, and is classified under NAICS code 541330, which pertains to engineering services. It is positioned as a subcontract and does not specify any set-aside status or organizational type restrictions. The place of performance is unspecified in the posted data but will be tied to active TxDOT projects across the state. Interested parties must access the full solicitation through the provided Texas SmartBuy portal link to understand scope expectations, deliverables, and contract terms.

Texas Department of Transportation

POSTED

DEADLINE

Construction Inspection and Testing ServicesThe contract seeks third-party inspection and materials testing services to ensure that pavement repair projects comply with Texas Department of Transportation standards. All work must be performed in accordance with TxDOT specifications to verify the quality, durability, and safety of materials and construction practices during active repair operations. The services are critical to maintaining infrastructure integrity and regulatory compliance across state-funded pavement improvement initiatives. This is a subcontract opportunity under NAICS code 541330, with a response deadline of August 12, 2026, at 4:00 PM. The solicitation was posted on July 20, 2026, and is administered by the Texas Department of Transportation through the TX SmartBUY platform. Performance will take place across various locations within Texas, with no specific city or state restrictions outlined. There is no set-aside classification, and participation is open to qualified third-party vendors capable of delivering inspection and testing services that meet TxDOT technical and procedural requirements.

Texas Department of Transportation

POSTED

DEADLINE

Quality Inspection and Compliance VerificationThe contract involves third-party inspection services to verify the quality of crack sealing work on transportation infrastructure, ensuring adherence to TxDOT and prime contractor specifications. Inspections will assess critical parameters including crack sealant adhesion, uniform coverage, and overall compliance with technical standards to guarantee long-term pavement integrity and performance. The work is targeted at maintaining state transportation assets through rigorous quality control measures conducted by qualified independent inspectors. This subcontract is solicited under NAICS code 541330 and is open for response until August 11, 2026, with the opportunity posted on July 20, 2026. Performance will occur across Texas transportation projects under the oversight of the Texas Department of Transportation, though specific locations are not detailed. Interested parties must meet the technical and regulatory requirements to perform these inspections and submit responses through the designated Texas SmartBuy portal before the deadline.

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Intermediate Procurement Specialist SupportThe contract seeks an Intermediate Procurement Specialist to provide direct support to the Director of Quality Assurance within the Department of National Defence, focusing on supply chain operations including inventory control, material management, and the administration of repair and overhaul contracts. The successful candidate will assist in ensuring timely acquisition and distribution of critical defense-related materials while maintaining compliance with established procurement policies and quality assurance standards. This role requires strong coordination with internal teams and external vendors to facilitate efficient logistics and sustain operational readiness across DND activities. The position is positioned in Nova Scotia and is structured as a subcontract under the Government of Canada’s procurement framework, with the North American Industry Classification System code 541611 indicating management, scientific, and technical consulting services. The opportunity was posted on July 20, 2026, and responses are due by August 7, 2026, at 7:00 PM Eastern Time. Although specific details regarding the point of contact or set-aside status are not provided, the contract is part of an ongoing government initiative to reinforce procurement capacity within defense operations. The work will be performed in alignment with federal guidelines and is intended to enhance the efficiency and accountability of materiel handling processes under the DND’s Quality Assurance Directorate.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

NATO/International Shipping and Marking ComplianceThe contract requires strict adherence to NATO TL8100-0100 packaging and barcoding standards for all international shipments destined for EU and allied countries, ensuring uniformity, traceability, and interoperability across military logistics networks. Compliance with these technical specifications is mandatory, encompassing proper material selection, labeling, unit consolidation, and barcode placement to meet NATO’s rigorous operational requirements for defense-related cargo. Performance is expected to support shipments originating from British Columbia and Nova Scotia, with accountability for correct packaging, marking, and documentation aligned with Canadian federal defense protocols. The solicitation is structured as a subcontract, open under NAICS code 488999, reflecting specialized logistics and freight support services. Proposals must be submitted by September 18, 2026, and the contracting authority is the Government of Canada through the Department of National Defence, with all activities tied to the broader goal of securing seamless and standardized international defense supply chain operations.

All Other Support Activities for Transportation

POSTED

DEADLINE

in about 2 months

Hazardous Materials Packaging and ComplianceThe contract pertains to the packaging, labeling, and transportation of hazardous materials such as lubricants and solvents in full compliance with Canadian Transportation of Dangerous Goods and Hazardous Products Regulations. The work is required to meet strict regulatory standards to ensure safety during handling, storage, and transit across designated regions including British Columbia and Nova Scotia. As a subcontract under the Department of National Defence, the scope demands rigorous adherence to TDG and HPR requirements, including proper documentation, emergency response preparedness, and certified personnel for all aspects of hazardous goods management. The NAICS code 493190 indicates this involves other support activities for transportation, emphasizing logistics and compliance services over direct transport. The opportunity is open for responses until September 18, 2026, with the solicitation posted on July 20, 2026. There is no set-aside classification specified, meaning all eligible contractors may submit proposals regardless of business size or ownership status. The place of performance is limited to British Columbia and Nova Scotia, requiring contractors to have operational capability within those provinces, including access to approved facilities and transportation networks suitable for hazardous cargo. All work must align with federal government protocols, and while no point of contact is listed, submissions must follow the official tender process via the CanadaBuys platform. Failure to comply with regulatory requirements will result in disqualification or contract termination.

Other Warehousing and Storage

POSTED

DEADLINE

in about 2 months

Electrostatic Discharge (ESD)-Sensitive Electronics Packaging & SupplyThe contract pertains to the supply and preservation of electrostatic discharge sensitive electronic components, requiring strict adherence to conductive packaging methods and compliant labeling standards set by the Department of National Defence and NATO. All materials must be handled, packaged, and labeled to ensure protection against static damage throughout the supply chain, aligning with international defense protocols for electronic component integrity. The work is to be performed in British Columbia and Nova Scotia, and the contractor must demonstrate capability in meeting the stringent environmental and handling requirements for mission-critical military electronics. This is a subcontract opportunity under NAICS code 334418, with a posted date of July 20, 2026, and a response deadline of September 18, 2026. The contracting authority is the Government of Canada through the Department of National Defence, emphasizing the importance of security, traceability, and compliance in the delivery of sensitive components. Bidders must ensure full alignment with DND and NATO specifications for packaging and labeling to qualify, and the opportunity is not subject to any specific set-aside provisions. Interested parties must submit proposals through the official Canadian government procurement portal prior to the stated deadline.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 2 months

Rubber Seals, Gaskets, and Preformed Packing SupplyThe contract is for the supply of preformed rubber, cork, or synthetic seals and gaskets designed for use in naval systems, requiring strict compliance with MIL-DTL-4816 specifications and Department of National Defence durability standards to ensure performance under demanding maritime conditions. All materials must meet exacting quality and longevity requirements to support critical naval applications, with a focus on reliability, resistance to environmental stressors, and precise dimensional conformity. The work is to be performed in British Columbia and Nova Scotia, aligning with Canadian defense infrastructure needs. This is a subcontract opportunity posted by the Government of Canada’s Department of National Defence, with a response deadline of September 18, 2026. The NAICS code 326299 indicates it falls under other plastic product manufacturing, reflecting the specialized nature of the seal and gasket production. The solicitation is open to eligible suppliers capable of meeting federal defense-grade standards, with no set-aside provisions specified. All bids must demonstrate adherence to technical specifications, proven manufacturing capabilities, and quality control protocols to ensure mission-critical readiness for naval operations.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

in about 2 months

Maritime Bearing and Mechanical Component SupplyThe contract involves the supply of matched-set and antifriction bearings specifically designed for use in shipboard hull and deck machinery systems supporting naval operations. All components must meet stringent compliance requirements established by the Department of National Defence, including adherence to Canadian government packaging and preservation standards to ensure durability and operational readiness in harsh marine environments. The items are intended for integration into critical maritime equipment where precision, reliability, and longevity are essential for mission success. Subcontractors are invited to respond by the deadline of September 18, 2026, with performance expected to occur across British Columbia and Nova Scotia, reflecting the geographic scope of Canada’s naval infrastructure and maintenance facilities. The North American Industry Classification System code 333991 indicates this falls under other industrial machinery manufacturing, underscoring the specialized nature of the bearings required. Although no set-aside provisions are specified, the contract is issued under the Government of Canada's procurement framework, ensuring alignment with federal acquisition policies and standards for national defense equipment.

Power-Driven Handtool Manufacturing

POSTED

DEADLINE

in about 2 months

Naval Shipboard Hardware Supply (Deck Fittings & Rigging)The contract pertains to the supply of forged steel deck hardware, including shackles, turnbuckles, and holdbacks, intended for use on HFX-class frigates, with all items required to meet MIL-SPEC or NATO military standards to ensure durability and operational reliability in marine environments. The work is classified as a subcontract under NAICS code 332211 and is being procured by the Department of National Defence on behalf of the Government of Canada, with performance expected to occur in British Columbia and Nova Scotia. The solicitation was posted on July 20, 2026, and responses must be submitted by September 18, 2026, at 19:00 Eastern Time, indicating a nearly two-month window for manufacturers or suppliers to prepare and submit their proposals. All hardware must comply with strict defense specifications to guarantee compatibility, safety, and long-term performance under rigorous naval operational conditions.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

in about 2 months

Emergency and On-Call Support CoordinationThe contract entails the provision of round-the-clock emergency contact and response services to manage critical service disruptions including bus breakdowns and meal delivery failures, ensuring timely intervention and resolution. This support requires active coordination with the prime contractor and designated government representatives to maintain seamless operational continuity under urgent conditions. The scope demands immediate availability and reliable communication protocols to address incidents at any hour, with a focus on minimizing service impact and restoring normal operations swiftly. The contract is classified as a subcontract under NAICS code 561499, issued by the Department of National Defence on behalf of the Government of Canada, with performance required in British Columbia. Interested parties must submit responses by August 4, 2026, with the opportunity posted on July 20, 2026. While no set-aside category is specified, the tender is accessible through the CanadaBuys platform, and all responsibilities hinge on the contractor’s ability to deliver consistent, high-response emergency support aligned with federal operational standards.

All Other Business Support Services

POSTED

DEADLINE

Fleet Maintenance and Support ServicesThe contract seeks services for preventive maintenance, repairs, and operational readiness support for a fleet of one to three buses dedicated to student transportation within British Columbia. The work requires full compliance with all applicable safety inspection standards and includes meticulous recordkeeping to ensure accountability and regulatory adherence. Services must be delivered to maintain buses in safe, reliable, and fully operational condition at all times, with emphasis on minimizing downtime and ensuring consistent transportation services for students. The contract is classified as a subcontract under NAICS code 811192, issued by the Department of National Defence on behalf of the Government of Canada. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026. While the specific location within British Columbia is not detailed, performance is expected to occur within the province. No set-aside provisions or eligibility restrictions are indicated, and no point of contact information is provided in the solicitation data. Interested parties must submit proposals prior to the deadline to be considered for award.

POSTED

DEADLINE

Student Transportation ServicesThe contract entails the daily transportation of students using between one and three buses, with service levels adjusted according to enrollment numbers, and requires the provider to be available during designated operational hours with the capacity to respond to emergencies. The service must be performed in British Columbia and is subject to inspection and formal acceptance by the Government of Canada through the Department of National Defence. Performance standards are tied to governmental oversight, ensuring compliance with required safety and reliability benchmarks. The contract is classified as a subcontract under NAICS code 485410 for school and employee bus transportation, with a submission deadline of August 4, 2026, and was posted on July 20, 2026.

School and Employee Bus Transportation

POSTED

DEADLINE

Daily Meal Catering ServicesThe contract requires the provision of daily meals for students at the Burnaby Campus, ensuring all meals align with Canada’s Food Guide by offering two choices from each food group to promote balanced nutrition. Meal services must fully accommodate dietary restrictions, including allergies, religious preferences, and medical needs, ensuring accessibility and safety for all students. The contractor is responsible for the consistent preparation, timely delivery, and proper serving of meals on campus each day, maintaining high standards of food safety, quality, and presentation. This is a subcontract under the Department of National Defence, with the solicitation posted on July 20, 2026, and responses due by August 4, 2026. The service falls under NAICS code 722310, which covers food service contractors, and the place of performance is specifically the Burnaby Campus in British Columbia. The contract does not specify a set-aside type or point of contact, and while the full details of the agency’s internal structure are not provided, the overarching authority is the Government of Canada. Bidders must be prepared to meet strict nutritional guidelines and logistical demands without exception, as compliance is central to successful performance.

Food Service Contractors

POSTED

DEADLINE

Controlled Goods Program (CGP) Compliance SupportThe contract seeks regulatory advisory services to ensure full compliance with Canada’s Controlled Goods Program, focusing on the preparation of End User Certificates and all necessary documentation for CGP registration or exemption requests. The work supports the Department of National Defence in meeting federal regulatory obligations related to the handling, storage, and transfer of controlled goods, with performance requirements spanning British Columbia and Nova Scotia. As a subcontract under NAICS code 541611, the engagement is tied to professional administrative and compliance services delivered in support of national defense logistics and security protocols. The opportunity was posted on July 20, 2026, with a submission deadline of August 4, 2026, and is open to qualified contractors capable of providing expert guidance on CGP regulatory frameworks.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE