Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Data Package & Specification Compliance Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract provides engineering support to interpret, validate, or reverse engineer technical specifications for a sleeve bearing, with activities centered around drawing validation and compliance testing. The work is guided by an unspecified Continuation Sheet, which serves as the foundational document for technical requirements and deliverables. The contractor is expected to ensure that all design, material, and performance criteria align with established standards, potentially involving detailed analysis of legacy or undocumented components to reproduce or verify compliance. This subcontract, classified under NAICS code 541330 for engineering services, is awarded by the Defense Logistics Agency under the Department of Defense and was posted on July 17, 2026. The work is tied to the contract SPE4A626P9358, and while no specific location or point of contact is listed, the scope implies close coordination with defense technical authorities. The nature of the work suggests a focus on supply chain resilience, parts obsolescence management, or legacy system sustainment within military hardware systems.

General Info

Engineering support for sleeve bearing validation and compliance under DoD contract SPE4A626P9358.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Engineering support to interpret or validate technical specifications for the sleeve bearing, including drawing validation, compliance testing, or reverse engineering based on an unspecified 'Continuation Sheet'.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will span all phases of project delivery including planning, design, construction, and closeout, supporting delivery methods such as Design Build, Progressive Design Build, and other alternative procurement approaches. The goal is to ensure projects meet established schedules, budgets, and quality standards while enhancing operational efficiency and infrastructure development across the Port’s facilities. Performance will primarily occur at Port of Seattle locations, though specific sites may vary based on project needs. The contract is forecasted with a NAICS code of 541330, indicating professional services in architectural and engineering activities. Primary contact for inquiries is Hala Rabbo, with additional support from Project Manager Ann Davidson, and all communications should be directed via the provided email addresses and phone numbers. While the solicitation number is not yet assigned and the posting date reflects a future forecast date of July 22, 2026, interested parties should monitor the official Port of Seattle procurement portal for formal solicitation details and participation requirements.

Construction Management

POSTED

about 9 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust and balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s critical facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope encompasses identifying and resolving operational deficiencies in mechanical, HVAC, plumbing, lighting, direct digital controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, reliability, and system longevity while ensuring full compliance with safety and regulatory mandates. Work is executed through Service Directives and requires close collaboration with Aviation Facilities and Infrastructure to meet project deliverables within the constraints of continuous airport operations. The contract is structured as an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330, administered by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, both reachable via the Port of Seattle’s official channels. All work must be performed at the airport location, with no specified set-aside criteria, and solicitations will be issued under the established IDIQ framework to select qualified providers for individual service tasks as needed.

Aviation Facilities & Infrastructure

POSTED

about 9 hours ago

DEADLINE

Technical Documentation and Traceability SupportThe contract requires the preparation and ongoing maintenance of comprehensive technical documentation packages for each delivery, ensuring all deliverables are supported by accurate drawings, detailed specifications, and complete traceability records. These documents must be meticulously organized to meet compliance requirements and enable potential reverse-engineering verification, emphasizing precision and continuity throughout the product lifecycle. The effort is critical for sustaining accountability and facilitating technical validation under stringent oversight. This subcontract is issued under NAICS code 541330 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 29, 2026, and a posting date of July 22, 2026. Although specific performance location and point of contact details are not provided, the work is intended to support defense-related technical operations with no set-aside designation. All documentation must be delivered in a manner that aligns with federal technical standards and supports long-term operational readiness and audit readiness.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Quality Assurance & Government Inspection SupportThe contract seeks technical quality assurance and inspection support to ensure filter bodies comply with military sampling and acceptance standards, requiring rigorous adherence to defense-grade specifications throughout production and delivery. This includes executing inspections, maintaining detailed documentation, and coordinating directly with government inspectors at the destination to verify compliance and facilitate acceptance. The work is classified as a subcontract under a Total Small Business Set-Aside, specifically designated for small businesses as defined by the SBA, and falls under the NAICS code 541330 for scientific and technical consulting services. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Although specific location details are not provided, performance is expected to align with government inspection requirements at the final destination point.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Quality Inspection and Sampling ServicesThis contract requires the provision of quality inspection and sampling services under the strict standards of MIL-STD-1916 or ASQ H1331, with an absolute requirement of zero non-conformances across all verification levels—critical, major, and minor. The work involves rigorous adherence to sampling protocols and inspection methodologies to ensure products meet uncompromising quality benchmarks, typical of defense and high-reliability applications. Services must be performed with precision and consistency to avoid any deviations that could result in rejection or non-compliance. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 541330 for scientific and technical consulting services. It is issued by the ASC Commodities Division of the Department of Defense with a response deadline of August 5, 2026, and was posted on July 22, 2026. While specific performance location and point of contact details are not provided, interested parties must access the official DIBBS portal via the listed UI link to obtain full solicitation materials and submit proposals in accordance with federal procurement guidelines.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Quality Assurance & Compliance DocumentationThis contract requires the performance of detailed quality inspections to ensure all products and processes meet stringent defense standards, with a specific focus on generating Certificate of Compliance and Quality (CoQC) documentation for each batch or unit. Traceability records must be meticulously maintained throughout the lifecycle of the supplied items to ensure full accountability and alignment with Defense Federal Acquisition Regulation Supplement (DFARS) and Defense Logistics Agency (DLA) mandates. The work is structured as a subcontract under the NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to be conducted in accordance with federal defense procurement protocols. All deliverables must be submitted and documented prior to the response deadline of July 29, 2026, and failure to comply with regulatory requirements may result in non-acceptance of deliverables or contractual penalties.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Engineering Services - Water Infrastructure Improvement ServicesThe City of Forsyth, Georgia is seeking qualified engineering firms licensed in the state to provide professional engineering services under the Georgia Environmental Finance Authority’s Water Infrastructure Improvement Fund Grant Program and related funding initiatives. The selected firm will support the City through all phases of project development, including grant coordination, engineering studies, and project closeout, ensuring compliance with grant requirements and effective execution of water infrastructure improvements. All selections will follow the Georgia Environmental Finance Authority’s Qualifications-Based Selection process and adhere to applicable state procurement regulations to ensure a fair and transparent evaluation of proposals based on technical expertise and experience. Proposals must be submitted by August 21, 2026, and solicitations are identified under the number PE-70250-NONST-2027-000000026, posted on July 22, 2026. Interested firms should direct all questions regarding the solicitation to Alex Smith, City Project Manager, at asmith@cityofforsyth.com. The services are to be performed within the State of Georgia, and while no specific NAICS code or set-aside status is listed, the contract is open to all qualified firms meeting licensure and compliance requirements under Georgia law.

City of Forsyth

POSTED

about 10 hours ago

DEADLINE

RFQC 345 - Request for Statement of Qualifications Airport Consulting Services / DesignThe Jekyll Island State Park Authority is soliciting qualified aviation consulting firms to support the Airport Capital Improvement Plan at Jekyll Island Airport in Georgia through a five-year Master Agreement. The selected firm will provide professional engineering, architectural, and construction administration services on an assignment-by-assignment basis, with individual sub-agreements negotiated as needed during the contract term. Participation requires pre-qualification by the Georgia Department of Transportation in the specific areas of Airport Design, Airport Electrical, and Airport Construction Administration and Observation. The selection process follows FAA Advisory Circular 150/5100-14E and relevant Georgia statutes to ensure compliance and competency. All proposals must be submitted by the deadline of August 26, 2026, and inquiries should be directed to Nicholas Wallis, the primary point of contact.

Jekyll Island State Park Authority

POSTED

about 12 hours ago

DEADLINE

in about 1 month

City of Warrenton EIPThe City of Warrenton is soliciting proposals from qualified engineering firms to provide design and construction supervision services for a sewer improvement project funded through the Georgia Department of Community Affairs Employee Incentive Program, a federal grant program administered at the state level. All work must comply strictly with federal and state regulations governing the EIP, and project activities will be closely coordinated with the Mayor and Public Works Department to ensure alignment with local priorities and compliance requirements. The engineering firm selected must demonstrate broad experience in municipal infrastructure projects, particularly those involving federally funded grants, and will be responsible for delivering professional services that meet both technical standards and regulatory obligations throughout the design and construction phases. The solicitation, identified as PE-66931-NONST-2026-000000008, was posted on July 22, 2026, with proposals due by August 24, 2026. The project is classified under a SLED organization type and will be performed entirely within the state of Georgia. Jeffrey Fowler of the City of Warrenton serves as the primary point of contact and can be reached via email at Jeffrey@HometownWarrenton.org. Bidders must submit responses through the official Georgia Procurement Registry portal, and no set-aside provisions are specified for this solicitation, meaning all eligible firms may compete without restriction based on business size or classification.

City of Warrenton

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Architectural and Engineering Services for Courthouse Annex Office Reconfiguration and Courtroom RenovationCarroll County in Maryland is seeking qualified architectural and engineering firms to provide comprehensive design and construction-phase services for the renovation and reconfiguration of an existing courtroom and Courthouse Annex Building space, along with associated support areas. The project involves significant alterations to improve functionality, accessibility, and efficiency within the existing municipal facility. Interested firms must submit a Statement of Qualifications in response to solicitation number 11-F-2-26/27, with submissions due by August 18, 2026, at 2:30 PM. The solicitation is open to all eligible A/E firms without a specific set-aside designation, and performance of the work will be localized within Carroll County, Maryland. All inquiries and communications should be directed to Carrie Dulski, the primary point of contact, via email or phone as listed in the solicitation. Proposals must demonstrate relevant experience, technical capability, and capacity to deliver high-quality design and construction oversight services for public infrastructure projects.

Carroll County - Government

POSTED

about 14 hours ago

DEADLINE

Automation and Control System IntegrationThe contract titled Automation and Control System Integration involves the configuration and integration of industrial control systems including PLCs and SCADA to monitor and regulate instrument air pressure, flow rates, and overall system status. This includes developing and deploying control logic, calibrating field sensors, and establishing a fully functional human-machine interface to ensure accurate data visualization and operator control. The work requires precise programming, system testing, and validation to meet operational reliability standards for critical infrastructure. The contract is issued as a subcontract by Philadelphia Gas Works under the NAICS code 541330 and was posted on July 22, 2026, with a response deadline of August 14, 2026, at 6:00 PM. The place of performance and specific location details are not provided, but the scope implies work will be performed at facilities operated by Philadelphia Gas Works in Pennsylvania. There is no set-aside designation specified, and no point of contact is listed, with all information accessible via the provided web link.

Philadelphia Gas Works

POSTED

about 15 hours ago

DEADLINE

Installation, Configuration, and Integration Services for Daily QA 4 Pro CheckerThe contract outlines the on-site installation, calibration, and integration of the Daily QA 4 Pro Checker with existing oncology systems at a facility in Jackson, Mississippi, with a zip code of 39216. The service includes ensuring seamless connectivity to SunCHECK v6.0 or later automation software to enable enterprise-wide data reporting and centralization of quality assurance metrics. The work requires technical expertise to align the device with current clinical workflows and infrastructure, ensuring accurate, reliable, and automated data capture for radiotherapy quality control procedures. This is a subcontract under NAICS code 541330, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026. The performance location is fixed at the specified site in Jackson, and no set-aside designation is indicated. The contractor must handle all aspects of deployment, from initial hardware setup to software integration and validation, ensuring compliance with operational standards and uninterrupted clinical functionality.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, CHECKA check valve with a 3.0 inch copper alloy body and flanged end connections, measuring 9.50 inches face to face nominal, is being procured under contract SPE7MC-26-T-144M by the Defense Logistics Agency. The item, identified by NSN 4820-01-272-7521 and part number 15-SW-F from William E Williams Valve Corp, is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Two units are required with zero variance allowed, and delivery must be FOB destination within 20 days of contract award. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special markings specified. Palletization and unit packaging must follow designated standards, and the shipment is destined for USNS YUKON T-AO 202 at FPO AP 96686. The original required delivery date is July 20, 2026, and the contract enforces strict compliance with government procurement protocols including transportation and handling instructions as outlined in DLAD PROC NOTES C19 and C20.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

PARTS KIT, SOLENOIDThe contract pertains to a Parts Kit, Solenoid with NSN 4810-01-508-9312, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-144T. Two identical units are required, each priced at $1.00, with a total quantity of two units delivered FOB origin within 20 days of the order. All items must be packaged in compliance with ASTM D3951 and labeled according to MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking absolute precedence over any other standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the Unit of Issue is listed as each (EA) with zero variance permitted in quantity. Inspection and acceptance occur at the destination point. Two distinct shipping addresses are specified: one for USS SOMERSET LPD 25 in FPO AP 96678 and another for USS ARLINGTON LPD 24 in FPO AE 09564, both requiring shipment via the fastest traceable means and explicitly prohibiting parcel post. Delivery is required by July 20, 2026, and the supplier must utilize the Vendor Shipping Module for freight coordination. Government-specific identifiers, tracking codes, and administrative data are included for internal use only, and compliance with all technical, packaging, and delivery directives is mandatory.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

WINDOW, OBSERVATIONThe contract specifies the procurement of one observation window, identified by NSN 9340-01-295-1753 and part number KS-24645, under solicitation SPE8E5-26-T-3671, issued by the Defense Logistics Agency. Delivery is required within five days of contract award to the destination FOB point, with no tolerance for quantity variance, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The window must be shipped to USS PATRIOT MCM 7 at FPO AP 96675, with transportation logistics governed by DLAD procedural notes C19 and C20, and no special markings are required beyond standard military compliance. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its packaging, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is classified under NAICS code 327215, and all government-specific administrative, shipment, and compliance codes are included for official use, with the required delivery date set for July 10, 2026.

Glass Product Manufacturing Made of Purchased Glass

POSTED

about 10 hours ago

DEADLINE

VALVE, GLOBEThe contract specifies the procurement of five stainless steel globe valves with a 1/2 inch size, model number 57574 W03-2074B-15MS, manufactured by Velan Valve United States OPCO, Inc. The valves feature a bolted bonnet, stainless steel F347 construction, CF8M Stellite trim, and a 600 PSI swp rating, with the NSN 4820-00-590-8770. All components must strictly comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. The valves are designated a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA; portable devices containing mercury must meet additional shock-proof and secondary containment requirements per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of award, with no quantity variance permitted. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, with palletization in compliance with specified standards and all items marked with the correct unit of issue and quantity per unit pack. The supplies must be delivered to the designated FPO address in Apalachicola, Florida, and shipping logistics are governed by DLAD Proc Note C19 and C20. The contract has a firm delivery date of April 25, 2025, with solicitation issued under SPE7MC-26-T-145A and a response deadline of August 3, 2026. The unit price is $5.00 per unit, totaling $25.00 for the full order of five valves. All vendor communications and fulfillment must reference the provided DLA vendor identification and project codes, with point of contact for inquiries listed as Marisa Thompson from the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-544-8819 and part number 76-508-01 from CONBRACO INDUSTRIES INC, under solicitation SPE7MC-26-T-144V. Delivery is required within 10 days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while strictly adhering to MIL-STD-129 labeling and DLA packaging requirements, with all technical and quality standards from the DLA Master List taking precedence. The item is to be palletized in accordance with RP001 and shipped via the fastest traceable method excluding parcel post to the designated military address at Fort Riley, Kansas. The required delivery date is July 20, 2026, and the contract includes specific government-use identifiers, a point of contact for inquiries, and links to official DLA systems for compliance and unit of issue verification.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

ATTACHMENT, COLLET HThe contract specifies the procurement of three units of Attachment Collet H under NSN 3460-00-042-4414, with a required delivery of 20 days from the award date and delivery terms set at FOB origin. Strict limitations are placed on the use of mercury or mercury-containing compounds, prohibiting any intentional addition or direct contact with the supplied hardware unless explicitly permitted for functional components such as batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA’s RP001 packaging standards, and all DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM provisions. Shipments must be sent via traceable freight to the designated Naval Undersea Warfare Center in Keyport, Washington, with parcel post strictly prohibited. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit price is $3.00 per item, totaling $9.00, and the contract number is SPE8E5-26-T-3666, with a required delivery date of July 20, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, SAFETY RELIEFA safety relief valve rated at 0.375 inch and 5,000 PSI, subplate mounted for use with hydraulic fluid, is required under this contract, supplied by Parker-Hannifin Corporation with part number R4V03-535-10A1. The product must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. Mercury and mercury-containing compounds are strictly prohibited except in specified exceptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or Navy-approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item is identified by NSN 4820-01-572-9614, with a single unit required and delivery due within 20 days FOB origin. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes applied. Palletization adheres to DLA packaging requirements, and shipping must occur via the fastest traceable means—parcel post is prohibited. The delivery destination is the USS Dwight D. Eisenhower CVN 69, FPO AE 09532, with transportation governed by DLAD Procurement Notes C19 and C20. The required delivery date is July 20, 2026, and the solicitation closed on August 3, 2026, under contract number SPE7MC-26-T-144R, administered by the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

VALVE, REGULATING, FLThe contract specifies the procurement of one regulating fluid pressure valve with NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-144U. Delivery is required within 20 days, FOB origin, with no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including marking and labeling per MIL-STD-129 and palletization according to RP001. Mercury or mercury-containing compounds are explicitly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents; portable items containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The valve must be shipped via the fastest traceable means, with parcel post strictly prohibited, to two distinct military vessel addresses: USS SOMERSET LPD 25 and USS ARLINGTON LPD 24, both under RDD 777 and project ZH9 TP 2. The contract mandates adherence to DLA packaging and procurement standards, and vendors must utilize the VSM system for freight shipping. The original required delivery date is July 20, 2026, with a solicitation response deadline of August 3, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

MARKER, IDENTIFICATIThis contract, issued under solicitation number SPE8E6-26-T-3817 by the Defense Logistics Agency, mandates the delivery of one unit of a Type I identification marker with a non-extendable shelf life of 12 months, identified by NSN 7690016685478 and part number 804-5959312 Rev C. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, including special marking code 32 for shelf-life compliance. Palletization follows DLA packaging standards, shipment must bypass parcel post, and delivery is FOB destination in exactly 20 days with zero variance allowed. Two separate delivery points are specified: one for USS ESSEX LHD 2 at FPO AP 96643 and another for USS DWIGHT D EISENHOWER CVN 69 at FPO AE 09532, each requiring traceable transportation and specific military freight handling procedures. The contract enforces strict adherence to DLA procedural notes for vessel shipments and requires the vendor to use the Vendor Shipping Module for logistics coordination. The original required delivery date is July 20, 2026, and the item is subject to inspection and acceptance at the destination.

Commercial Printing (except Screen and Books)

POSTED

about 10 hours ago

DEADLINE

CONTAINER, DEPLOYABLE BThe contract solicitation is for a Deployable Container, designated as CONTAINER, DEPLOYABLE B with NSN 8145-01-591-7441, under purchase request 7015793832 for a quantity of one unit. The solicitation number is SPE8ED-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, and was posted on July 22, 2026, with a response deadline of July 26, 2026. This is a federal procurement opportunity with no specified set-aside classification or NAICS code, indicating it is open to general competition. The place of performance and organization address details are unspecified, but the procurement is U.S.-based. Interested parties must submit responses prior to the deadline through the official DIBBS portal linked in the solicitation.

POSTED

about 10 hours ago

DEADLINE

LABELThe contract specifies the procurement of a blood group labeling product identified as "BLOOD GROUP B, RH POSITIVE" with precise dimensional and formatting requirements, including a black-on-white codabar and expiration date label measuring 1-7/8 by 1-7/8 inches nominal, compliant with the latest FDA Guidelines for the Uniform Labeling of Blood and Blood Components. The unit of issue is a roll of 250 labels, and bidders must clearly indicate the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation or award date depending on acquisition size, and the labeling must adhere fully to those referenced standards. The contract also notes that covered defense information may apply, and the delivery must be completed within 20 days after order. The solicitation, identified as SPE8E6-26-T-3824, is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 323117 and a NSN of 7690-01-393-5085. The purchase request number is 7017574314, and only one roll is required. The place of performance is FPO with a zip code of 96632, and responses are due by August 3, 2026, with the solicitation posted on July 22, 2026. Primary point of contact is Tai Nguyen, reachable via email and phone, and additional details are accessible through the official DIBBS portal. All submissions must comply with DLA packaging and labeling mandates, including the removal of government identification from non-accepted supplies, and proper documentation of compliance must accompany bids.

POSTED

about 10 hours ago

DEADLINE

STEM, FLUID VALVEThis contract is for the procurement of a single STEM, FLUID VALVE with NSN 4810-01-516-3861 and part numbers 13182-4 and 56-12767-C27, supplied to meet strict military specifications under solicitation SPE7MC-26-T-144K. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions apply: no ozone-depleting chemicals may be used in any part of the product, and mercury or mercury-containing compounds are forbidden unless specifically exempted for functional uses in batteries, instruments, or weapon systems approved by NAVSEA. Any mercury-containing portable lamps or instruments must be shock-proof and include secondary containment as per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and unit containment, and labeling must follow MIL-STD-129 without special marking codes. The item must be delivered FOB destination within 20 days of contract award, with no variance in quantity allowed, and inspected and accepted at the destination. Delivery is to USS CHUNG HOON DDG 93 at FPO AP 96662, with transportation handled under DLA procedures C19 and C20. The contract requires full compliance with DoD unit of issue standards and includes a required delivery date of July 20, 2026, with solicitation response due by August 3, 2026, issued by the Defense Logistics Agency under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE